Three types of online... What do mean?
I have recently joined Revel and find quite suitable for me as I have Mac, iPhone and iPad. I am a free Member, I can't wait to download more than 10,000 photos within a month.
I find there are three kinds of 'transfer '. I try to understand what they mean in reality. Please specify. "Sending new pictures', 'Sending of original Photos' and in the side bar of the desktop application,"download Previews.
Thank you!
When you upload new photos to revel, Moose full size of the file is loaded into memory and then downloaded to the cloud of revel. In addition, a small thumbnail is generated and downloaded to your phone so that you can view photos on your phone without having to load the photo full size of the cloud. If you want to save a photo on your camera or change it, then the full size photo will be accessible from the Cloud.
Guinot
Tags: Revel
Similar Questions
-
Recently, when I turn on my computer is starts, guests of the computer and starts check my system files as follows: "checking file system on C: the Type of the file is NTFS. The Volume is dirty. "That is what this means and how can I clean and maintain the clean Volume, please? My computer is Dell XPS
The computer system continues and invite "CHKDSK checks the files (step 1 of 3)... .
The system deletes some files and at the end of shows, complete audit files and then show
CHLDSK is verifying indexes (stage 2 of 3)...
Once again, it shows the following:
Deleting Index Entry _64280 ~ 1. jpg in index file 4632 $130
Deleting Index Entry _64280552_little-mix_211112_get [1] .jpg in index file 4632 $130
Deleting Index Entry 69gw [1] .jpg in index file 6722 $130
Remove entries of Index 69 GW_1 ~ 1. jpg in index file 6722 $130
Deleting Index Entry _64274754_messi_211112_elvis [1] .jpg in index file 6722 $130
Deleting entry Index _64274 ~ 1. jpg in index file 6722 $130
Finished the index checking
CHKDSK is checking security descriptors (stage 3 of 3)...
100%
CHKDSK checks usn Journal...
Windows control disc is finished.
After all checks, Windows proceed to start as usual.
I would like to know if I need the dirty Volume, and if so, how can I carry out the cleaning operation.
Sometimes, at the early stage of the CHKDSK, the computer makes a pe. .. PE... noise and cut. Then I turn the computer off via the key of the insulation. When I restart the computer, it then runs the check again until the end.
Please advice me on the following points:
1 is this normal as he started only happening in recent weeks?
2. How can clean the Volume in order to show "Volume is clean instead of sale"
I look forward to hear from you.
Thank you
Hi, Dr.,
Volumes that contain file system errors are known as Sales. To indicate that a file system problem has occurred and that the volume is dirty, Windows XP Professional displays a message similar to the following when you try to open, delete, or rename a file or folder by using Microsoft Windows Explorer or the command prompt:
Autochk runs if the volume is marked as modified.
If the file system has marked the volume as dirty, Autochk runs the Startup Repair process. Volumes are marked as dirty, when the file system detects an error on the volume. If Autochk detects a dirty volume, it provides a delay of 10 seconds, and then starts the repair process. If you cancel Autochk when a volume is dirty, Autochk tries to run again after a 10 second delay every time the computer is restarted.
See Chkdsk for all the necessary explanations:
http://TechNet.Microsoft.com/en-us/library/bb457122.aspx
Run the Dell Diagnostics to check the drive failure. If the disc is a failure, it must be replaced.
-
The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000
Anyone know what this means? Next steps?
styner55 wrote:
The MacBook Pro hardware test error code: 4SNS/1/40000000:TB3T-128.000
Anyone know what this means? Next steps?
An error in temperature sensor associated with the component of battery on the CPU
Your only option is to take a test 'Apple Service Diagnostics'
Genius of booking http://www.apple.com/retail/geniusbar/
Online https://getsupport.apple.com/GetproductgroupList.action
check the warranty https://selfsolve.apple.com/agreementWarrantyDynamic.do
-
[Error number: 0x8024400A] trying to download SP 3 for XP, the error code is returned. What it means?
You must be at Service Pack 3 level before you can use Windows updates.
To determine which service pack is currently installed on your computer, follow these steps:
- Click Startand then click run.
- Copy and paste, or type the following command, and then click OK:
winver
A dialog box displays the version of Windows and the service pack that is currently installed on your computer.
If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).
How to obtain the latest Windows XP service pack
http://support.Microsoft.com/kb/322389Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717It is stated in "How to obtain the latest service pack XP" is.
If you have problems obtaining the service pack from Windows Update, you can download the package of standalone update from the Download Center. This page will say that this installation package is intended for it professionals and developers. However, you can download this file safely. The following file is available for download from the Microsoft Download Center:
Download the Windows XP Service Pack 3 package now
See also: http://support.Microsoft.com/kb/2497281
You may be unable to access the site Web Windows Update in Windows XP, Windows 2000 or Windows Server 2003 -
Fatal error in WMI. What it means and how to fix it?
I tried to do maintenance on my computer. However, I get the following message: cannot access the Windows Management Instrumentation software. Management of Windows files may missing or moved. I don't know what that means and I don't know how to fix it. I know that my computer is running like * now.
If you see a message like this:
Unable to access Windows Management Instrumentation software. Management of Windows files may be displaced or missing.
Either the Windows Management Instrumentation Service is not running or your information from WMI files are missing or damaged. It is easy to rebuild the WMI information files and replace all the files corrupted or suspicious.
To solve your problem, stop the Windows Management Instrumentation service, rename the folder WMI suspicious or distressed, then restart your system. When the system restarts, the WMI service will start automatically and rebuild the WMI folder and it's content automatically.
Here's the process:
Click Start, run and enter in the box:
services.msc
Click OK to launch the Services applet.
Locate the Windows Management Instrumentation Service. If the status column indicates that the WMI Service is started (ongoing), right-click on the WMI Service and choose to stop the WMI Service.
Answered in the affirmative, if requested to stop Security Center and Windows Firewall Services (with stopped services, your system is vulnerable to attacks from the Internet, so do not receive is not on the Internet again until you reboot your system).
Now would be a good time to check also the properties of the WMI Service to make sure the startup type is set to automatic for the Service WMI will start automatically the next time the system is restarted.
The Explorer, navigate to the following folder (assuming that your boot drive is C):
C:\Windows\System32\Wbem\
Locate and then rename the folder "Repository" to something, as you remember, such as:Repository.Old
Restart the computer, and then make sure that the WMI service is restarted automatically and that a new repository folder has been created to replace the one that has been renamed. It may take a while to completely rebuild the file storage (several seconds or minutes) so expect it ends.
After the reboot, you will notice the wmiprvse.exe Service running in the Task Manager and it will continue to run until it completes the reconstruction of the repository (this may take a little time).The rebuilding process could take several minutes depending on your system, but eventually the wmiprvse.exe Service ends and disappear from the Manager tasks.
If you then look at the Event Viewer Application log, there may be some error messages like this:
Event type: error
Event source: WinMgmt
Event category: no
Event ID: 4
Description:
Failed to load C:\WINDOWS\MICROSOFT.NET\FRAMEWORK\V4.0.30319\MOF\SERVICEMODEL MOF. MOF by retrieving the file from the repository.This is normal because when the system restarts, the wmiprvse.exe process has to rebuild parts of the repository as well. It is a mistake to sequence as shown below. You should not see these mistakes again after the system has been rebooted and catches up and finishes rebuilding the WMI repository.
Explanations for errors encountered in the case of the Application of visualization of the newspaper the WMI repository is rebuilt:
Explanation
Windows Management Instrumentation could have tried to compile the file (mofcomp) a .mof marked for ASR, but compilation failed. This is probably due to a sequencing problem.
User action
To correct the problem, try to compile the .mof again. If this does not resolve the problem, contact the provider of technical support for the program in question.You shouldn't need to do something about these error messages and do not see again them after that XP has finished rebuilding the WMI repository.
I can't say how long this will take to rebuild, maybe 10 to 15 minutes until it settles completely.
-
Photo Gallery can't open the photo or the video because this file format is not supported or I have no updates to the photo gallery of what it means?
Hi mariart
Welcome to the Microsoft Answers Forum!
· What format of picture or video file you are trying to open using the Windows Photo Gallery?
Here is the link that will give you the description of the Windows Photo Gallery: Windows Photo Gallery: frequently asked questions
Make sure that the Windows Photo Gallery is the default value. Steps to follow:
i. Click Start, in the search box type in default of program
II. Select set your default programs
III. click the windows photo gallery, and then select set this program as default
Link for reference: change that uses default Windows programs
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
When I open a PDF and try and connect you to convert the document to word format he said "reader has no ability to access this service" and it doesn't let me move forward. -What this means and how do I continue to Word so I can change the pdf document?
Hi wayned76005641,
You subscription Adobe export to PDF, make sure that you are signed in DC from Adobe Acrobat Reader Adobe - Adobe Acrobat Reader DC Distribution using your Adobe ID to use the service to export it to PDF service The Adobe export in PDF format allows you to convert a PDF to Word, Excel, PowerPoint and RTF formats..
You can also use this online https://cloud.acrobat.com/exportpdf service
Once the PDF is converted .docx file you can edit in MS Word.
Kind regards
Nicos -
What exactly means "charge USEFUL?
What exactly means "load USEFUL." ??? Please help me with simple examples and the process of BPM.Hello
1. you will have a charge separate for each item in your process. There may be some additional attributues that each task may need. If possible put them all in one single load .xsd file itself. Then use specific fields for a specific task.
Putting them into word doc will not help with the exception of your documentation. They are all should go into the under your composite/xsd file .xsd file.
Even if you have the script task, you should always put all fields for this in xsd or xml format only.
When you build a human task, means that you drag and drop a human task on a process. Then, double click and for the setting and click + to add a new task and this is where give you payload.A friendly suggestion is also a large part of the theory will be complicated especially for soa/bpm applications. I would recommend with this understanding you begin practice as with Hello everybody or or simple examples of online. In this way, we can understand both theory and see how this is implemented. I don't want to confuse you with the theory more. Then, start with the actual sample and if you have any questions, then we can take it from there.
The sample will give about all the details. I don't have any right now. But google around you should find some.
Thank you
Ravi Jegga -
Hey;
I'm sorry, I asked so many questions lately and thanks to everyone who helped me. The Dreamweaver EULA says that you cannot expose trade secrets. I have no idea what it means. If they mean their ajax or php coding... Well it is incorporated into each Web page made with their software?
Are they referring to the criminal who type show and boning to know what makes the program tick? I don't! I hate people that do. It's the prison worthy in my book.
Any info will help this topic so I don't break this rule very oddly.
Don't know what version of this EULA, you are looking at, but the only reference to trade secrets in the CS3 and CS4 EULA is the following:
Structure, organization and code of the software are the valuable trade secrets and confidential information of Adobe Systems Incorporated and its suppliers
I am not a lawyer, but in the layman of the terms which means: "create a Dreamweaver clone, and our lawyers will have a field day." In other words, no reverse engineering.
There is no secrets in HTML, PHP, CSS, JavaScript, etc. code generated by Dreamweaver. It is yours to use.
-
Tracks with a star - what it means?
I know the meaning notes have been removed, but a few songs at random by the album has a star next to them, now that I have updated to iOS 10.0.1. Anyone know what they mean and how
The star simply means that the "popular" titles
-
I found this in my log files 26 July 2016, 22:55:18 com.apple.xpc.launchd [1]: the appellant attempted to divert the service: path = System/Library/LaunchAgents/com.apple.pluginkit.pkd.plist, calling = loginwindow.6205 what that means?
Just a log message system that does not mean nothing, except an engineer. If you don't know what mean the entries in log file, and then save your time and forget about unless you have serious problems.
-
the identification has changed to the CHRC... what it means?
The icon for Mozilla Firefox has been reading of Mozilla Firefox, but now it shows the CHRC... what it means, what it is and why it was changed?
The text under your Firefox on the Windows desktop icon has changed to the CHRC...? I think that you can rename it to whatever you want, but I see no reason for this change on its own.
Could you do a right click and take a look at properties? You expect to see a 'target' like "C:\Program Files\Mozilla Firefox\firefox.exe" Summary anything here?
-
I couldn't install the firefox 16.0.2, the message I got was: that "${MinUnsopportedVer} is missing." That what it means?
See also:
-
HP Envy 20-d034: what it means when you check repair status indicates pending
My PC is in the repair center. What it means when you check repair status and it says pending.
Hello Andrea,
This means that the parts of the computer are not in stock, they try to get parts
-
What does mean MCMailErrorDomain error 1032
What does mean MCMailErrorDomain error 1032? and how it resolved
What functional problem do you have?
Maybe you are looking for
-
Is it normal...? (just a general question)
Basically, I recently bought an iphone 6s and he had ios 9.0.1 on it, is this normal? I guess it's because that's what his last one was from his box and ready to be sold. Sorry, on the issue been randomly wondering type think and wanted to know.
-
HP 15 ac149 tx: placement of 15 HP ac149tx
Can someone tell me where are the speakers of 15 HP ac149tx located? Are they strong enough?
-
Carpet * a UJ830S - code 39 displayed in Device Manager
Salvation; I don't know what happened, but my CD/DVD does not work. It seems not more in my computer. I went to the system, my devices and noticed that the carpet * a driver has a yellow exclamation point. I uninstalled and then reinstalled the drive
-
Pavilion 6710f: upgrade to 3.0 in desktop pavilion 6710f usb ports?
I have a hp pavilion p6710f desktop that has 4 usb 2.0 ports on the back, & 2 front. is it possible for me to install usb 3.0 ports in whole or in part? or just add them (which would be better)? Thank you!
-
GEEN SQUEEZE IK MEER BINNE WAT KAN HET ZIJN CLEAN EMAILS