Pavilion 6710f: upgrade to 3.0 in desktop pavilion 6710f usb ports?

I have a hp pavilion p6710f desktop that has 4 usb 2.0 ports on the back, & 2 front. is it possible for me to install usb 3.0 ports in whole or in part? or just add them (which would be better)? Thank you!

You can check your power cables. PIN 4 (molex), looked like this:

What I see on the page product, you will need it IF you use the USB port for equipment that consumes energy high enough. That is to say; external hard drive, smartphones.

If you are just using the port for a mouse or keyboard, you will not need this.

Tags: HP Desktops

Similar Questions

  • Pavilion a6120n: USB ports and slots memory card does not

    My Pavilion a6120n desktop computer has worked brilliantly since I bought it. Since last week the 2 front usb ports and 2 unused usb ports in the back have stopped working. My printer is plugged into a rear port and my wireless mouse is plugged into a second rear port and these work very well.

    I use usually a USB key for the exchange of data or card reader locations (which have also stopped working). I no longer see memory card icons in the window 'computer '. When install something again the "new hardware found" statement appears, but the driver install always fails. I think it's a software problem, but there is no usb drivers to download on the HP/support site that I can find... so...

    Here's what I've tried so far.

    Run antivirus software. Full scan & scan memory - no problem

    Don't scan complete malewarebytes - no problem

    I tried to reboot several times without success.

    Catering to several previous = failure restore points

    Computer restart in repair = failure mode

    Use the repair disk I did = failure

    Control the management of the power supply for each usb port see if power was properly routed = ok

    Removed the cover of the housing and carefully inspected the cables and connectors.

    Finally I tried to uninstall the drivers usb = failure

    After restarting the computer the last time that the boot file has failed, and after several hours of attempting a repair, I had to reinstall Windows 7 completely.

    Still no usb or memory card function.

    Any help would be appreciated

    Thank you

    MrBob38

    OK, after a lot of frustration and a reflection to when the problem started. I discovered it all started when I installed my new HP Envy 4500 printer all-in-one. It has wireless capabilities, but I installed it via a usb cable.  I just didn't know it would be the problem but I started with this premise.

    I got all components usb of the computer (except the mouse at the moment). So I uninstalled all the usb drivers I had on Device Manager.

    After restart, drivers loaded automatically and everything works fine now. I see my camera via the connection cable, the work now in sd slots and all the work of the usb.

    I left the 4500 want connected and installed the printer with the network provided on the installation disc software. I test printed from my computer and iPod so far, and it still works properly.

    I did have to reinstall Vista. Could it have been a glitch in the installation of the software want to through the usb cable? Don't know and don't care at this point. Just happy that everything works.

    Thanks for the comments, and I consider this problem to be solved.

    MrBob38

  • The upgrade to 2.0 for a wireless adapter USB Port work

    Hi, I just bought a USB network adapter wireless, I was able to configure my laptop but when I plugged in my USB Port, I got a message that he needs one more USB 2.0 Port and I must improve my USB port to make it work properly, how can I upgrade my USB port at the top level? Thank you and hope you can help me with my problems... Alice

    Hello

    As Flo don't say, no chance to upgrade the USB ports.

  • Pavilion DV7: USB Ports not working not

    The usb ports on my pavilion dv7 stopped working.  In doing research I think it has something to do with the drivers, but being not not 100% technical, I'm not entirely sure how to solve this problem.  Could you please help me solve because I use quite often the usb ports as well as to synchronize my phone etc.

    Thank you.

    Hi @laci2013 ,

    Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

    I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your HP Pavilion dv7 Notebook and issues with the USB ports on 10 newly installed Windows. Here is a link to solve the USB connections.

    I would like to uninstall all listed in the universal serial bus controllers list.

    Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices before you uninstall the controller Universal serial bus.

    Restart your computer, and then insert the USB device.

    You can try to use the Windows Update Troubleshooter to fix updates that do not come through Windows 10.  Please restart the laptop twice to make sure that all updates are completed!

    I hope this helps.

    Thank you.

  • Pavilion 15: HP not Pavilion no USB port works, that means UEFI diagnostic code

    All USB ports stopped working (as in no popup when it is plugged in and the devices get not power port).

    I did all the thingsm usual as uninstall drivers and re - detect.

    USB port running in UEFI test, I get the following for all three ports

    ID 0URK1V-75E89A-MFPV6J-8D4E03 FAILURE

    FAILURE IF G5FF00EA #ABU

    Searching the Web I can't find what do these codes mean someone at - it a pointers please?

    Thanks in advance

    A hardware failure in the usb on the motherboard controller chip, which means that it needs a new motherboard. Are you still under warranty?

  • Pavilion p6523w USB ports

    Where is the USB ports on the Panel before the p6523w?  According to the specifications of product online there are two, as well as headphones. Crazy, I'm just not see them. Help appreciated.

    At halfway in the front, you see a band chrome who is a sliding door push it downwards to reveal the usb etc.

  • HP Pavilion 2243us usb ports no-oporational

    Hello. Ports usb 3.0 on my laptop have stopped responding. I have a 4.0 port usb as well and that it is still functional. I tried to install the wireless driver button, but it does not download properly. I guess that's because I installed windows 7. What can I do to solve my problem?

    If your model is G7 2243us try the drivers of this model with a similar equipment & Windows 7 driver support.

    These two are necessary:

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379202&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_123787_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

    http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5379202&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118744_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

  • HP Pavilion a850e USB ports showing only not in 2.0 but 1.0

    Whenever I plug anything in my office, it appears a window that says, may be faster on a faster port. Ports are supposed to be USB 2.0, so I don't understand why she said this. And all the jacks front and rear. I use Windows 7 Ultimate SP1. Is it possible to tell if the ports really work USB 2.0 and 1.0 not?

    JTK, welcome to the forum.

    You can check to see if there is a Standard PCI enhanced USB host controller in Device Manager.  This is the driver for USB 2.0.  If it is there, you have USB 2.0.

    If your problem is solved, please click "accept as a Solution.

  • Desktop HP Pavilion HPE h8 - 1360t there rear USB ports?

    I have one of these order of HP computers. Everything I've read indicates there are USB ports on the front and the top of the unit. Nothing on the back. Not even a photo. Having the wires coming out of the front constantly ensure is ugly, in my opinion.

    Here are the specifications and configurable options for the desktop HP Pavilion HPE h8 - 1360t CTO. Here are the specs because that's card mother IPMMB-FM (Formosa). According to the specifications;

    (#2) - USB 2.0: 4

    (#4) - USB 3.0: 2

  • Pavilion S5-1204: USB Ports does not: Windows 7 HP Pavilion Slimline

    Hi all

    Yesterday all of a sudden the USB ports are not read.  I have cameras and use a data transfer cable or a card reader to transfer to the office.  Now they do not read.  Tried the front and back of the usb ports.   However, the optical mouse that uses a usb device works.   I don't understand how the mouse works and the purse strings of data transfer and the readers aren't.

    Win 7 64 bit

    HP Pavilion Slimline desktop computer

    Help!

    Update: I did troubleshoot a HP check and update driver.  The screen messages

    USB root hub: this device does not work correctly.

    The current tab:

    Generic USB Hub (6)

    1 port available

    Power required: 0mA

    Solved.

    I've narrowed the problem to the camera. Very strange. The camera will take pictures and display them on the screen. But something is happening internally where the image will not transmit or transfer it via a usb device.

    I have another device with a transfer device and it works. So it seems I have to buy a new digital camera. BTW, it is a Nikon S2800 - not recommended.

  • USB problems: When HP Photosmart C4599 is enabled, all other USB ports on the desktop becomes useless

    I just bought a HP Photosmart C4599 and successfully installed the software provided on my HP Pavilion 743c Desktop.  I connected via a USB cable.  I am running Windows XP SP3 and automatic updates are on.  I've updated the software that came with the printer and everything seems to work properly.  I printed and scanned successfully.   However, I noticed that when I connect my memory stick or digital camera via USB, I now get this message annoying that States, peripheral USB not recognized.  The only way to get my computer to recognize my stick of memory or the camera, is to stop my printer and then reconnect my stick of memory or the camera.

    Somehow the printer or the software's a waste opportunity to my computer to recogize the devices that are connected via the USB port.

    I wish I could connect my memory stick or the camera without turning off my first impression.

    Any solution would be really appreciated.

    This usually occurs on computers with older chipsets USB which cannot provide enough power to multiple devices at the same time. The best you can do is try and install the latest drivers for your motherboard or update the BIOS of your motherboard. Otherwise, use only 1 USB device at the same time. Or, buy a powered USB hub and connect the printer or get a new computer.

    In addition, you do something else. Unplug all USB devices from your PC (except the keyboard and mouse). Now just turn off your computer and unplug the power cable from the Tower of the wall outlet. Be it like that for about 20-30 minutes. Now just press the power button on the tower for about 3 to 4 times to ensure that all static electricity is passed, then plug the cable into the wall and turn on the PC and try the two devices to connect to the PC and see if you get the error messages.

    In addition, you can insert the memory stick into the memory card slots printers and view pictures on your computer.

  • USB ports no longer work after upgrading Windows 8.1

    I have upgraded to windows 8.1 and from that moment, my USB ports don't work anymore. tried to check them, but does not (uninstall,...);

    I have a HP Pavilion 15-B050EB; I can't find the drivers for the USB ports on the HP site. can someone help me?

    called them; very friendly guy, but the only solution is a total recovery.

    which means a working day to do backups and re - install software programs...

    Thanks for your kind help anyway!

  • HP Pavilion - assignments of ports for disk hard ext

    QUESTION: I have three external hard drives.  For several months, whenever I have connect a particular hard drive (via USB), this hard drive is assigned the same port/drive assignment every time, no matter which USB port it is plugged.  For example: the 200 GB h/d is always assigned drive K:, 300 Go is always assigned L: drive and the 750Go is always drive N:.  Note that I have plug that these discs hard (at different times) in the two USB ports on the Panel front of the office.  Recently, I plugged the 300 GB hard drive into a USB port on the Panel front of the office and he was assigned to the K: drive (when it is normally assigned to the L drive :).  This created a problem for two reasons: 1) my Creative Mediasource Organizer connects the PC music library to the L: drive and 2) my Adobe Premiere Pro and Adobe Encore DVD projects contain assets that are related to the L: drive.  I managed to set up this drive of 300 GB as drive l: yet once, by plugging in first (turn on) the 200 GB hard drive and then do the same for 300 GB hard drive.

    QUESTION: Is there a way to have my external drives assigned to specific ports/drives on my desktop, when they are turned on and connected?

    SYSTEM INFORMATION:

    HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600

    Thank you

    Angela

    ``````````````````````````````````````````
    old computer: HP Pavilion PU131AV / a1050y, Intel Pentium 4 CPU 3.20 GHz, 2 GB RAM, Windows XP MCE, SP3 32-bit, Nvidia GeForce 6600
    new computer: HPE-180 t, Windows 7 Pro (64 bit), Nvidia GeForce GT 220, Intel Core i7 - 930 quad-core CPU @ 2.80 GHz, 8 GB of RAM

    I think I found the solution.

    http://www.online-tech-tips.com/computer-tips/how-to-change-the-drive-letter-in-Windows-XP-for-an-external-USB-stick-or-hard-drive/

    If you have experience with this problem and can check this solution, please let me know.

    Thank you very much

    Angela

  • Unrecognized on a Pavilion dv9000 USB devices

    I have a Pavilion dv9000 and the computer will not recognize the USB port at all.

    I tried

    -updated BIOS

    -updated drivers

    -Uninstall and update drivers

    -System Restore (did not work at all for some reason any)

    -take out the battery and restart

    What should I do?

    alyssagogo wrote:

    1. 1 year (out of warranty)

    2 p/n GL880Ua #ABA

    3 HP Pavilion dv9000

    Did you change the partitions somehow? NO.

    Is your laptop / PC still within its warranty period? NO.

    The initially installed operating system is still installed? YES

    When I talked to a computer store, they said it was likely that the motherboard is endangered because I had trouble with USB ports and wireless has stopped working. From what I understand there was a reminder of the motherboard that I missed?

    Unfortunately, this is true. It will not hurt to do a Google search on it. There was a lot of people more than exceeded this period.

    With desktop computers, we simply add a PCI or PCIe card.

    Your laptop is an ExpressCard/54 Slot (also supports ExpressCard/34). This means that you can add a card like this on NewEgg.com

    Best regards

    Eric

  • HP pavilion g6 cannot enable usb ports

    Hai,

    my product is hp pavilion g6 2320tx and im using the windows operating system 7, the problem is that am not able 2 usb ports allow 3 (a single port woking normally but the other two are not detect devices usb..) pls guide me so that I can solve this problem

    Thanks in advance

    Hello:

    You must install the driver for the 3 usb controller.

    http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359407 & spf_p.tpst = swdMain & spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_118604_1%257CswEnvOID%253D4058%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument & javax.portlet.begCacheTok = com.vignette.cachetoken & javax.portlet.endCacheTok = com.vignette.cachetoken

Maybe you are looking for

  • MacBook Pro crashing / interpret a report of Crash of OSX

    So I get some accidents every day I followed this link Apple then finally: erased from my hard drive reinstalled OS El Capitan Run the Apple hardware test / Diagnostics (detailed version) and had no problems only used Mac S/W had no devices running Y

  • What firefox is compatible with window 7 64bite House?

    I got a new operating system (window 7 home 64 bite) and the new hard drive (WD 1 TB). I want to use Firefox, but I don't know which version of Firefox is the best for my system.

  • Use WLAN on Satellite L40 - 18Z with Windows7

    Hi all My laptop is Satellite L40 - 18Z. Recently it has been upgraded from Windows vista to Windows 7. After the upgrade wireless light was not lit. Also Fn F8 key and the Fn, keys do not work. Could someone help me solve this problem? Kind regards

  • W530 UltraNav Driver installed - where is the UltraNav utility?

    I am at a loss as to where the options are to tweak the UltraNav pointer and the touchpad on my Win7 64 bit W530. I did a fresh install of Win7 on it and downloaded all the drivers (more to run the system update utility) and while the UltraNav Driver

  • HP Pavilion dv6-6b56er and Windows 7 x 64 Professional

    Hello. I bought Pavilion dv6-6b56er with pre installed Win7 x 64 Basic, which is not convenient for me, because of its lack of features. So I made a full backup of the hard disks in the Pavilion and removed all software it. Then I installed Win 7 x 6