tilt event on the storm
This may be a simple question and answer elsewhere, but here goes. How can my program know that the (storm) unit tilted? I hope for some event types and to endure, I can use the event handler to redraw all my items screen to reflect new dimensions of the tarp. Something like a listener of filed amendments attached to every change in tilt.
Thank you.
There is no "tilt event", but your sublayout() method is called when the unit switches from portrait to landscape (and vice versa). This gives you the opportunity to rearrange the fields to accommodate the new screen real estate.
Tags: BlackBerry Developers
Similar Questions
-
How to capture key down even in storm.i watched protected Boolean touchEvent (TouchEvent message) but is not capture the key down event. I went through a few posts, but did not get an answer to my question.
Hi actually the problem is in a field of basic editing I display a hint on keydown I remove that text and what ever the user types it will be appear.there has a small mistake on my part to the control of a few conditions.so, I do not have the expected behavior. KeyDown has different behavior in jDE 4.6 and JDE 5.0.After touches down in the execution of the method the key appears in the text box in JDE 6.0, but in JDE 5.0 it comes before it self is what I learned from my mistake.
' public boolean keyDown (nKeyCode, nTime int int)
{
nameField.setText("");Returns false;
}in JDE 6.0 if I press H in the domain name after the keyDown whatever text is in the name field, it will go and H is displayed
But whatever the text is all that will go into JDE 5.0. That's what I've learned
-
I'm stuck and I write as a last resort.
I created a simple calculator application that works very well on all devices. My only problem is that when running on the storm, it does not (Simulator or device) when the device is tilted. My application is published in 4.0.2 (despite the existence of edition JDE 4.7 does not make a difference).
Can anyone suggest reasons this would happen? I tried searching the forums, but all I get is messages on how to stop the rotation, which promotes the beliefs that it should automatically be turning.
If you are compiled on 4.0.2 as you claim, then your application will never shift.
Compile under 4.7.
-
ListField does not scroll in the storm
Hello
I use the simulator of the storm.
I have a ListField inside a VerticalFieldManager in a VERTICAL_SCROLL and VERTICAL_SCROLLBAR style.
I can move the list down with keyboard arrows down or the field list does not scroll to the top, but when I try to use the key (right key) in the Simulator.
Looks like I'm missing something, please help.
Thank you
Thanks for the help. But I thought about it. Missed me the call to the call of super.touchEvent (event)... So now, I handle the case else if is not a click, then I call the return super.touchEvent (event);
-
The keyboard does not work in the storm
Hello guys!
The scene is, I have very an app in 4.2 and I want my application to be run in each BB devices. It works very well in all devices except storm.
When I deploy the application into the storm, compatibility mode is TRUE by default, and in this scenario, I am not able to read all the key events. Application works fine in compatibility mode is false.
that someone has an idea... ??
Hey guys... I got to know that this is a bug in the device of the storm. I checked too where someone have already locked bug on jira. So for now, I'm tagging this post as a solution so that the person that you are looking for the same can save their time.
We should wait for the solution of the RIM guy.
-
not all the events of the day on the notification screen
Hello
I can't get all the events of the day in the calendar widget on the screen of the notification of my iPad. Genius Bar and Apple Support are unable to solve. Can anyone help?
Thank you
for this I think should download sparse, ultra calendar application very simple, advanced and simplified
-
How to set a default calendar for new events in the calendar on Macbook Pro
Although I have studied this issue in forums, I'm still without resolution. New default event for the calendar of 'Calendar' in the game on my Mac of calendars even when it is initially unchecked and hidden in the calendars list.
I don't see a place in the calendar preferences or in system preferences > iCloud to make changes. I would like new events, write in the default calendar for "Calendar" calendar in my iCloud.com account.
Any thoughts?
Well, here's the scoop:
To set the default calendar, open the calendar, choose calendar > Preferences, and then click general.
Default calendar
The calendar where new events are added by default. If you choose "Selected calendar", then the calendar highlight in the calendar list is the default calendar.
-
Recently, I get such a problem:
1. I opened a last date in the calendar default ios
2. create an event:
-put the name of the event 'Accident '.
-day 17 April 2016
-start time 16:00 (end time 17:00)
-all other attributes - default:
calendar by default (have also 1 calendar personalized in a list)
No rehearsal, no trigger time, no participating, call back in 30 minutes
* a tried also the attributes of different event with the same effect. Didn't help not also choose my google calendar. tried several times)
3. Press 'Add '.
wait: event created, appears on that date and remains
get: event appears and disappears in about 1 second
What could be? Can help you with this? What IOS Bug?
Creation of future events - no problem
Settings - Mail, Contacts - synchronization scroll to calendars - events - How back does go - you may need to reset it to take account of the date that you set the old event from
-
Calendar failed to refresh events in the calendar "calendar".
My exchange calendar Office 365 always worked but somehow, an invitation he has screwed up and now it is showing
Calendar failed to refresh events in the calendar "calendar".
There was an error trying to send your changes to the exchange server.
You can have the same problem like this:
-
Since 10.11 I have not been able to download via the usb port of my Davis Vantage weather station. No solution of tech Davis on the issue even with the new recorder of events in the resort. Is there a problem with the usb?
What Mac? (details)
-
How can I see calendar events on the calendar reminder app tab.
Please guide me how can I add or view the events of the calendar reminder (apple by default app).
You must add them to the application of point - so often asked for - sharing event information is not currently supported
(1206)
-
WNDR3700 not internet connection due to the storm
My modem to broadband ISP (ARRIS TM822) was killed during a storm, it was replaced with the same model, and at the beginning, when I plugged my router, the wireless worked well. I'm not in the settings or something, just plugged in, and it worked perfectly. However the next morning, I was unable to connect to the internet.
I did a lot of troubleshooting:
- Firstly, I fed all the way down, pulling cables, batteries on the modem, etc and started in sequence. This is done several times without success.
- I updated the firmware on the router, done the commissioning, no luck
- Connected on the router, using the routerlogin.net and run the configuration wizard. Got the message saying 'No Internet connection detected' ' Please check connection to the modem cable/DSL and of Internet WAN port.
- Did a factory reset and used the resource CD. To the tab of preparation, got 'No adapter' ' is either disabled or no Ethernet card Ethernet card is installed on this computer...» "I've updated the driver for the LAN on my computer (it's something RealTek) and uninstalled and re-installed. Same result.
- In addition, the port is very well. The LED indicator for the Ethernet port is shining green on the router and the computer, the port "lights" to show a good connection. It also works very well when it is connected directly to the modem.
- The State of the computer shows LAN network data is sent and received when it is connected to the router, quite strangely, even if I can't connect to the internet.
Thus, it has been a long and frustrating day. I'd appreciate help on solving this problem.
Thanks in advance.
Hi Elaine,.
I couldn't make it work. I pretty well confirmed, however, it is the router. I tried another router and it works very well with the modem, and I had a friend check my router on its network. It did not work there either. I'll have to buy another.
Maybe it was damaged during the storm that killed the modem. Just very strange that he worked for a while before stopping and that he was not completely killed as the modem, just maybe the internet port. Both have been connected to a surge protector as well! Maybe I can get compensation from the manufacturer. Well...
Thank you for following it upwards.
-
3D touch won't let me spend the events in the calendar
When I try to move an event in the calendar of the iOS, tactile 3D becomes active and it is impossible to do: in other words, the 3D pop-up rises, Prov. extra info on the element, but it does not move on the calendar. Is there a way to fix this?
Do not press the screen. In other words, just touching the entrance of calendar slightly until it changes color and you can move it. Simply leave your finger there for a second or two for her turn to move.
-
When I add a new event to the calendar, I type the name of the event in the field, change the time, add notes, etc. When I press return, the new event indicates briefly on the calendar as what I typed, but most of the time, it is up to 'new event '. I tried to change my sequence of this type I and sometimes validate instead of return, but it doesn't seem to be a reason for this behavior. Also, it happens all the time, just most of the time.
It's extremely frustrating because if I don't notice it right away, I don't know what was the event.
Any suggestions?
I use OS X, 10.9.5.
Maybe this will help.
-
using the structure of the event in the LabVIEW classes
Hello
I'm new in the use of LabVIEW classes, so don't know much how I can use them.
In my main program, I have clusters with five elements in each. The elements are controls two States and in some groups, there are three States controls. The user will press the buttons (controls), and different things will happen. In my first program were I not using classes, I had a structure of the event and the controls were cases of event in the structure.
Is it possible to somehow use an event of cases in one of the methods that is created in the classes, so that say, that's not in the main program?
I have attached two photos: I wanted to have a structure of the event in servoTouchEvent (in left.tri.lvclass) who is a child.
Let me know if my explanation is not clear.
Grateful for the help!
Hello
Yes, you can have a structure of the event in a Subvi rather in your main VI of top-level UI. The trick is to use the 'Save for events' and passing in references to orders that you want to have the event trigger structure for. The refnum output since the function is entered in the terminal of dynamic event of the structure of the event who could live in a Subvi. You can add instances of event where you will see these control events as dynamic events then you can do something with. These excerpts from shows all the code in a simple diagram, but the stuff in the structure of disable diagram could easily transformed into a Subvi:
All this can be done without classes. What will buy classes you include the ability to encapsulate your screws and also perform different code based on what object on the hierarchy of the parent-child classes is on a wire. If the behavior of your code is different between 2-3 State and controls (which I do not know what state controls 3 you are referring), you can take advantage of the classes.
Maybe you are looking for
-
What should I do to get the video jerky unless I have disable add-ons?
Most of the videos I watch online is choppy, as the video goes back moving forward always forward. There are Facebook and YouTube. The sound is fine. It started about 6 months ago. I recently noticed that IE doesn't have this problem, so I think that
-
Satellite L650 - fan constantly at 90%
I have a L650. My cooling fan cools constantly at 90%, unless I turn on the computer after a sleep, then the fan does not start! So for me its either 90% or nothing!I have the most recent, so that not the problem BIOS and change the power management
-
Pre-release of Windows 10 and ReadyNAS.
Someone at - configure a system with a pre-release version of Windows 10 and network a ReadyNAS?I am interested because I intend to update soon (not sure if I'll do day 1-29/07/15), and I was wondering what impact it could have.I currently use Window
-
HP photosmart B8550: fatal error "-Stub""66186"»
My printer has stopped printing. The page came across as if it was printing to go, but it came out white. I went to the HP website and went through the process of downloading and installation for the drivers, including all the troubleshooting steps
-
While creatng new file in Communcationdata base software get error Flashfiler.FF SERVER (object unexpected exception raised