Time in hours

Similar Questions

• Frequent disconnects on 1 device (several times per hour)

  Hello

  I bought the Amazon N300/WNR2020v2, a month ago. Is the latest firmware (V1.1.0.32_1.0.1). I can't remember if it ever worked right, but I get frequently disconnects. And by frequent I mean several times per hour (up to 10, 20, 30 times per hour). Sometimes my connection will last 30 minutes, sometimes 2 min. I'm a developer and I work from home, so it became completely unworkable. I absolutely can't do anything more than a few minutes without disconnecting.

  Things, I tried, without success:

  -Changing the channel

  -Reduce the MTU 1420

  -Various DNS (8.8.8.8..),

  -Change of speeds 54/150/300

  When the connection drops, it is not just my internet connection, I cannot ping the router either (so I have no internet and no local network).

  I had another router before, and everything worked just fine (ASUS WL-330gE). Unfortunately, I lost it, so I can't come back.

  I must also say that I have a good amount of connected devices (maybe 10), but you know, it's just modern life (printers, computers, phones, dropcams,...).

  Advice? I can't work essentially. It's very frustrating.

  In fact, I talked to my wife after the announcement, and she said that she does not know the question. I tried to leave her computer open watching the Dropcam next to me (if I have something that uses the connection permanently and I can easily monitor), and that she feels no drop, which means that the issue could in fact be my computer (which is weird, because it works very well at work).

  Came across this:
  http://Apple.StackExchange.com/questions/235739/constantly-dropping-Internet-on-El-Capitan/248228

  And it seems that this can be fixed:

  sudo ifconfig down awdl0

  I will update in a bit to see if it really fixed. I've seen the issue on my phone too, so I'm not sure that this, it is 100%. We'll see.

• I get started internet several times per hour

  I have a Toshiba Satellite.  I'm off the internet all the time.  Several times per hour the Road Runner cable co Ihave said that's not the problem please help

  Also check action center and drivers Windows Update will offer to you once they become available.

• I paid £8,57 for photoshop cc 2015 already. I have a cornfirm email to buy site why I cannot accese to my App. how I can do but I'm not paying for this application two times per hour, I said... Thank you

  I paid £8,57 for photoshop cc 2015 already. I have a cornfirm email to buy site why I cannot accese to my App. how I can do but I'm not paying for this application two times per hour, I said... Thank you

  Check your account indicates the subscriptions that you expect (and that the adobe, used in the next step id is correct) by logging in here and checking the status of your subscription, https://www.adobe.com/account.html

  then, if it's current, disconnect and then back to your client application using the adobe with the link above in cc id: http://helpx.adobe.com/creative-cloud/kb/sign-in-out-creative-cloud-desktop-app.html

  If you don't have the cc desktop application, retrieve it and use it to install your programs cc/tests, https://creative.adobe.com/products/creative-cloud

• Diffeerence time and the amount of time in hours

  I have table with Dates such as the timestamp
  
  I want to get the elapsed time in hours and minutes, and sum of elapsed time in hours, minutes
  

  ID     START_TIME                     FINISH_TIME                   Elapsed_time     Sum_Elapsed_time
  2     18-FEB-20 10.08.42.000000 AM     19-FEB-20 10.01.51.000000 AM     17.09     
  2     16-FEB-20 10.13.54.000000 AM     16-FEB-20 10.15.54.000000 AM     2:00     
  2     17-FEB-20 10.09.58.000000 AM     17-FEB-20 10.11.58.000000 AM     2:00     
  2     11-FEB-20 10.23.00.000000 AM     12-FEB-20 10.02.00.000000 AM     3:00     
  2     18-FEB-20 10.00.00.000000 AM     19-FEB-20 10.03.00.000000 AM     3:00     
  2     18-FEB-20 10.09.18.000000 AM     18-FEB-20 10.13.29.000000 AM     4.11     
  2     17-FEB-20 10.10.06.000000 AM     17-FEB-20 10.10.33.000000 AM     0.27     
  2     24-FEB-20 10.09.55.000000 AM     24-FEB-20 10.12.45.000000 AM     2.5     
  2     24-FEB-20 10.09.58.000000 AM     24-FEB-20 10.12.48.000000 AM     2.5     
  2     18-FEB-20 10.09.16.000000 AM     18-FEB-20 10.13.30.000000 AM     4.14     

  create table ENTRY_TIME
  (
    ID          NUMBER,
    START_TIME  TIMESTAMP(6),
    FINISH_TIME TIMESTAMP(6)
  )
  ;
  
  prompt Loading ENTRY_TIME...
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('18-02-2020 10:08:42.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('19-02-2020 10:01:51.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('16-02-2020 10:13:54.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('16-02-2020 10:15:54.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('17-02-2020 10:09:58.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('17-02-2020 10:11:58.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('11-02-2020 10:23:00.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('12-02-2020 10:02:00.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('18-02-2020 10:00:00.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('19-02-2020 10:03:00.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('18-02-2020 10:09:18.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('18-02-2020 10:13:29.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('17-02-2020 10:10:06.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('17-02-2020 10:10:33.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('24-02-2020 10:09:55.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('24-02-2020 10:12:45.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('24-02-2020 10:09:58.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('24-02-2020 10:12:48.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  insert into ENTRY_TIME (ID, START_TIME, FINISH_TIME)
  values (2, to_timestamp('18-02-2020 10:09:16.000000', 'dd-mm-yyyy hh24:mi:ss.ff'), to_timestamp('18-02-2020 10:13:30.000000', 'dd-mm-yyyy hh24:mi:ss.ff'));
  commit;

  Or maybe

  SQL> with t
          as (select start_time,
                     finish_time,
                     (sysdate + (finish_time - start_time) - sysdate) * 24
                        diff_in_hours
                from entry_time)
  select start_time,
         finish_time,
         trunc (diff_in_hours) || ':' || round ( (diff_in_hours - trunc (diff_in_hours)) * 60) time_diff,
         trunc (sum (diff_in_hours) over (order by start_time)) || ':'
         || round ((sum (diff_in_hours) over (order by start_time) - trunc (sum (diff_in_hours) over (order by start_time))) * 60) running_sum
    from t
  order by start_time
  /
  START_TIME                   FINISH_TIME                  TIME_DIFF            RUNNING_SUM
  ---------------------------- ---------------------------- -------------------- --------------------
  11-FEB-20 10.23.00.000000 AM 12-FEB-20 10.02.00.000000 AM 23:39                23:39
  16-FEB-20 10.13.54.000000 AM 16-FEB-20 10.15.54.000000 AM 0:2                  23:41
  17-FEB-20 10.09.58.000000 AM 17-FEB-20 10.11.58.000000 AM 0:2                  23:43
  17-FEB-20 10.10.06.000000 AM 17-FEB-20 10.10.33.000000 AM 0:0                  23:43
  18-FEB-20 10.00.00.000000 AM 19-FEB-20 10.03.00.000000 AM 24:3                 47:46
  18-FEB-20 10.08.42.000000 AM 19-FEB-20 10.01.51.000000 AM 23:53                71:40
  18-FEB-20 10.09.16.000000 AM 18-FEB-20 10.13.30.000000 AM 0:4                  71:44
  18-FEB-20 10.09.18.000000 AM 18-FEB-20 10.13.29.000000 AM 0:4                  71:48
  24-FEB-20 10.09.55.000000 AM 24-FEB-20 10.12.45.000000 AM 0:3                  71:51
  24-FEB-20 10.09.58.000000 AM 24-FEB-20 10.12.48.000000 AM 0:3                  71:54               
  
  10 rows selected.
  

• Apple Watch display time + 1 hour

  Yesterday when upgrade SO 2.2.2 Cairo time displayed on the watch do not match the iPhone (one more hour).

  I tried to restart, UN-pair & pair the same a time difference between iPhone & watch

  Thank you

  Hello

  Verify that you have also updated your iPhone to the latest version of the software (currently iOS 9.3.3):

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  Note, however, that another user has reported the same problem with the time in Cairo:

  • Shows + 1 hour at the time of the iPhone

  You may need to contact your mobile operator for assistance.

  More information:

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

• Why is Time Machine backup 2 times every hour?

  Time Machine backup to 24 times per day. Backups seem to be monitored hourly backup of 2-5 minutes later.

  Yes, it is possible. After hours of that backup Time Machine check if changes have been made during the backup. This can cause an additional round of backup (usually short).

• Get track List - Last Timestamp returns a time one hour behind

  Hello

  I use the DSC module to create traces.  I need the timestamp of the last of a trace.  When I go to the track via MAX (export to text file), I see all timestamps in the trace.  When I use the "Get Trace List.vi" it returns is an hour behind.  I would make up for just an hour, but I thought that I saw that it compensates for return after writing again.  I have a complex code, and after having thought about it, I think the "Get Trace List.vi' should work.  I tried to turn the time zone but this makes no difference.  A solution I just think now is to use the track of the reading, but use a more recent time interval.  In my case I do not know the more lately but if I got the data from last month and used the max/min chart on the table timestamp incomming; It would work.  OK, so I thought about a work around, but maybe someone knows something about why this last time stamp is an hour off the coast?

  Thank you

  Matt

  You have not included everything essential subVIs, but I suspect a problem with the setting "Daylight Saving Time".

• Photoscreensaver.SCR on Win 7 x 64. Max play time < 5 hours; 4.3 GB of many jpg files.

  Dear readers,

   

  Thank you very much for taking the time to read my ad.

   

  My main concerns/queries on windows 7 photo screensaver .scr:

   

  1. it is only a 32-bit application and crashes when there are a large number of files,

   

  2. sometimes restarts the computer after BSOD - removed wireless keyboard n mouse.

   

  3. is there a maximum size of all files in the folder where he plays the photos (all photos are in .jpg format)

   

  4. is there a little the 64 bit version of the application in the pipe that people could not meet the problems I had.

   

  5. I have an amd 64 64-bit at the beginning (6 GB of ram) that I have connected to my 46 "SONY BRAVIA TV and you want to use as a photo viewer when bores him. computer idle timeout = 1 min for photoscreensaver start.  He played for less than 5 hours correctly and literally suffocating for me to reboot (details below).

   

  6. is there another player from picture windows that I miss that play photos randomly.

   

  7. I have 17 MB of dump file compressed that I can share with the developers.

   

   

  EVENT DETAILS:

  more details as to why I ask myself the questions above:

   

  After searching many validations for the problem that I had with my screen saver, I discovered the following:

   

  in win 7, 64 bit, scrnsave registry entry is correct according to http://support.microsoft.com/

   

  I put all my photos about 4.3 GB for my e:\MyPhotos4TV look at the pictures from the digital camera and the rest scanned on the 46 '' tv.

   

  Suddenly the accentes pc with blue screen of death.  then I removed the keyboard and mouse wireless between the PC and replace them with a USB keyboard and a mouse.

   

  screensaver picture show then used to freeze or crash.  After looking in the folder, I found some .mov files and a zip file.  so, I moved them out of the folder e:\MyPhotos4TV.

   

  After that there was no bsod, but when the images are played back randomly, photoscreensaver.scr process hangs for a few minutes and resumes the display of photos on the TV screen.

   

  After the 1st shot of the screensaver on a particular photo, the application continues that the display of the other ongoing phoros, only to hang on another photo.  the frequency of the hang increases with time and I get deparate to stop it and a reboot of the machine.

   

  the 1st shot of photoscreensaver.scr enforcement spend 4 hours to let the picture display on the TV using screen saver.  the hangs of 2nd and 3rd comes with 30 minutes and I have to restart with 90 minutes of the hang 1 screensaver.

   

  Another thing I noticed was that the photoscreen saver was only a 32-bit application - I didn't know if the 4.3 GB (2power 32) limited the photoscreensaver.scr or scrnsave.exe;  My question: Why microsoft nt make this a true 64 bit app?

   

  When the application is suspended, I've seen the process in the Task Manager and generated a dump file - surprisingly this dump file is 75 MB in size.

   

  I have a 64 bit with 6 GB of ram (533 hz) OS and hard drive is a SATA.

  
  I'll be happy to troubleshoot or test with MS Eve software good screen that will make very interesting lives.

  Thanks and greetings
  Roy M. Kaushika

  Hi Ravi,
  Thanks for the reply.

   
  I suggest you to send us the minidump files so that it becomes easier to identify the reason for this problem. But, before you proceed with the steps on how to collect the minidump files, make sure that minidumps are enabled on the computer.

  You can follow the steps:
  Step 1:

  To ensure the minidumps are enabled:
  
  (a) go to start, type "sysdm.cpl" and press ENTER.
  (b) on the Advanced tab, click on the Start button and recovery settings.
  (c) ensure that restart automatically is not checked.
  (d) under the heading of the writing of debugging information, select partial memory (256 KB) image in the drop-down list box (varies from 256 kb).
  (e) ensure that the Small Dump Directory is listed as '% systemroot%\Minidump.
  (f) click OK.
  (g) restart the computer if changes have been made.

  Step 2:

  Please follow the steps to copy the contents of the minidump files:
  (a) copy the contents of \Windows\Minidump to a different location (temporary) somewhere on your machine.
  (b) zip to the top of the copy.
  (c) attach ZIP archive to your message by using the button (attachments) "trombone".
  (d) please upload to a service like Skydrive to share files and link to them in your answer.

  You can check the link to find out how to send the files minidump using Skydrive:

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65
   
  Thank you.

• How can I prevent employees to enter a future time sheet hours

  I've had several people (including myself) create a timesheet Sunday and eventually show up on time for the current week instead of the previous week.

  Is it possible to tell the employee that they enter the hours at a later date?   Or when the time sheet is sent to confirm that they submit a timesheet in the future.

  Any suggestion would be appreciated!

  Thank you!

  Michelle

  Michelle,

  You can lock the timesheets to stop people entering in the hours time sheets, but is not in any way that I know to keep them from getting into hours in future time sheets.  I'm going to talk about this topic for you product.  Does this happen often?  If so, you can post on the site of MOSC idea if we can get this on the roadmap?  Be sure to select Instantis: Primavera - PRIM (MOSC)

• You will need to validate the format of the time 24 hours with the check constraint.

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Hi, Athuru,

  Athurumithuru wrote:

  Hello

  I need to validate a field in a table with 24 h format. I created forced bellows, but not validating the only of numbers. Pls help me on this.

  ALTER TABLE ADD RESERVATION

  CONSTRAINT CNST_CHK_VB_ACT

  CHECK (regexp_like (law on the ' [[: digit:]] {4}'))

  ENABLE

  NOVALIDATE;

  Rgds,

  Athuru Mithuru.

  Let's start by defining precisely what you want.  For example

  1. The 1st character can be 0, 1, or 2.
  2. The 2nd character can be any number EXCEPT if the 1st character is '2', then the 2nd character must be in the range ' 0 'to 3'.
  3. The 3rd character can be '0' and '5'
  4. The 4th character can be any digit.

  It's pretty simple code like a regular expression with the exception of the exception in the 2.   Here's a way to get around that:

  REGEXP_LIKE (law on the)

  , ' (' || -options for the first 2 digits of start

  "([01][0-9])' |" --0 or 1, followed by another digit

  '| (2[0-3])'    || -2 followed by 0, 1, 2 or 3

  ')'              || -end of the options for the first 2 digits

  '[0-5]'          || -any digit between 0 and 5

  '[0-9]' - a figure

  )

  As others have said, think about the type of data.  How will you use this column?  If you really need a column which reflects a time of day, but not special, then perhaps an INTERVAL, or a NUMBER (for example, the number of hours after midnight) rather than a string.

• PHP - time time converted by time zone hours and days

  HAVE THE SOLUTION

  A person enters a form with; day, month, year, and submit´s.

  This gives the word Place of birth info

  By submitting these data, the user will receive new info:

  1. the day of the week associated with each date

  2 a special for each date

  (1 and 2 have a lot more, but I think that not necessary for this ex in)

  I created the table:

  Calendar (for the 100 years) which also has answers to the column for 1 and 2 above for each date

  It is then INSERTED etc. for a user table and works perfectly on the next page that users see.

  WANT THE SOLUTION

  But I also have a more advanced option that I call more precise

  In this form (new shape) the user must enter: minute, hour, day, month, year and country and submit.

  Here, the user wants to obtain more precise info from the day of the week and it can be + or - an associated day to where they were born on the globe.

  A. the time zone 0 - this is Myanmar.

  B. (DayInMinutes) table has a column for each day in a few minutes. Ex Thursday is 5760

  C. a table (time zones) has each country (124) in a few minutes, associated with the 0-zone schedule. Ex. Norway is 330, USA (PST) is 870, and New Zealand is - 270 (New Zealand is ahead)

  
  

  So when users enter their data above, I already know B and C of these tables.

  But now comes the part I don't know still Don t .

  How to add numbers of table b of the table in C and then use this number to determine what day it is actually more precise.

  (table DaysInMinutes also have columns with every minute, the hour, the sum of these etc, every day. So if I get the sum of the tables above (B and C), e.g. 5983, this table will determine exactly which is Thursday min 43 and 03 h)

  QUESTION

  I read David powers Php Solutions... c. 14 and so I know it's probably very simple. But...

  (there are probably easier ways to do it. But, as my knowledge of php is only a few weeks, I just use my mind to set up these things. So, please answer this first way 'roundabout'. Because WHEN you're working, I can easily 'peal the union' later)

  Can someone tell me how I can do this in PHP?

  Thank you, David.

  I will be so just figure it myself.

  Richard

• Car moving at the time 11 hours

  Hello

  I'm doing a timeline with a moving car. He must go from left to right to 11 hours.

  I got this code, and the car moves from left to right:

  Import fl.transitions.Tween;
  Fl.transitions.easing import. *;
  Import fl.transitions.TweenEvent;
  
  bus.x = 0;
  bus.y = (stage.stageHeight-bus.height)/2;
  
  var carTween:Tween = new Tween(bus,"x",None.easeNone,300,stage.stageWidth-bus.width,39600,true);
  carTween.addEventListener (TweenEvent.MOTION_CHANGE, onChange);
  
  function onChange(e:TweenEvent):void {}
  
  trace (bus.x);
  }
  
  carTween.addEventListener (TweenEvent.MOTION_FINISH, onFinish);
  
  function onFinish(e:TweenEvent):void {}
  trace ("out of gas, complete destination");
  }

  But every time I refresh my page the car starts again. So I have to join a Timer/date class to him so it stops at a certain point / time and date.

  Can someone help me on this because I can't understand how do...

  TNX

  An interpolation will not help you in this.  Try to think in terms of proportions and rather than using an interpolation, adjust the position of the car of the time elapsed since the start compared to the total time.

  So if you need to travel from 0 to stage.stageWidth in 11 hours, the current position will be...

  currentPosition = stage.stageWidth x ((currentTime-startTime) /totalTime)

• my pc clock keep time in hours and minutes. The box is checked to address the DST. What else could be?

  I have windows xp.  My clock keeps losing time in minutes.  I continue to challenge and continues to waste time.  I know that this is not because of the DST.  I have the box checked to change daylight saving time.  I've updated.  Nothing works.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/the-clock-wont-keep-the-current-time/dff4a031-12f8-412d-9a58-3fecc3ea3120

  There are a few solutions in the thread above, most saying that your battery needs to be replaced.

  For instructions on how to replace the battery or look in the manual of your pc if you go to your manufacturers Web site.

• WRT54GH disconnects about 10 to 12 times per hour.

  Hello

  I just bought router WRT54GH.

  I have a PC (Ubuntu) connected via Wireless.

  Every 5-10 minutes I am disconnected during a short period of time (10-30 seconds). During this period, I am able to access the router configuration page, but cannot connect to the ' world '... Surely it is not on my Internet provider, given that connect the PC directly to the cable Internet works very well with no "unplugging".

  Tips / ideas, please?

  Thank you

  c.

  Try these settings in the router.

  Disable UPnP.  Under settings wireless Beacon Interval 75, RTS and fragmentation of the threshold to 2304.  Try channel 1 or 11.  Save the settings.  To connect, and then try again.