TKTDS 380: How to record 2 channels signals

Similar Questions

• Qosmio F10: How to record audio and video and use QosmioPlayer

  I am owner of a Qosmio F10-122 with TV tuner and I really need HELP. I'm Italian.

  The questions are:
  1 QosmioPlayer version 4.0.1 (2005022812) (according to the procedure of the forum) has installed fine but the sensitivity is poor; in any case the question is: is is possible to record videos? Also is it possible to record audio?

  2 input and video output are stupid; I can see Windows and QosmioTV on HDTV via DVI/SCART but I can't input in MCE TV or QosmioPlayer any signal IN Composite; so the question is once again how can record AUDIO from my Home stereo or VCR VHS VIDEO?

  3. I only use VIDEO IN to WATCH is not to save: where is my fault?

  Thanks, Marco

  Hello Marco

  I did some testing and I can tell you about my experience on Qosmio G20.

  1. as far as I know early versions of Qosmioplayer did not have the registration option but now I hope that your preinstalled version has REC option. If so, please be sure that you have about 5 GB of free space for the recorded material.

  It is not important what signal is sent to your Qosmio (TV or VCR VHS-connected) you can find it if you look at the channels. With REC option, you can save what you want. I tested it with my VCR VHS and I recorded some old movies. This material was recorder und great quality was the same as on cassettes. After recording, I started Windows MCE and transferred the material recorded in Windows using Qosmio player utility.

  I have not tried, but I put t think you will be able to record audio using only Qosmioplayer.
  2. you can record movies VHS if you connect your VCR VHS on the Qosmio using the antenna cable. Launch Media center Edition (TV option) and scan channels. In my case, I could watch movies VHS on MCE on channel 31. Using REC option you can save all documents of video cassettes. Later, you can change the recorded material and create own DVDs. It really isn't a problem.

  Your audio Home Audio recording can be a bit more problematic, and if you want it to be on the professional path you will need a device external and of course some professional recording software.
  3. I don't know what to write here. Just try to do what I already descriebed under 1 and 2.

  Good bye

• How to record video in or of port S-video on Qosmio G40?

  Can someone tell me how to record video or S-video ports, because I tried the Ulead DVD factory program and only capture device, he could see was the webcam, and he did capture her

  After that, I downloaded the file to update provided by the support Web site
  That the program could see the devices are the TV tuner and the webcam (which he could not access more for some reason any)

  After that, I downloaded a more recent update simply is identical to the last updated and seems that someone in the support Web site made the link to the new update which they do not have to file the previous update that doesn't really matter.

  Hello

  There are 2 ports s-video; s-video output port is not designed to pick up signals from an external source. This port name says it all; It s an OUTPUT port!

  S-video-in port must be placed on the right side of the laptop. Don't mix the two ports. But note; This port receives only video signals. To hear the sounds, use a video cable to connect the audio terminals of the device and your computer.
  Red: audio right channel
  White: channel left sound
  The Ulead DVD Movie factory can be used to capture this signal.

• How to record data using a while loop?

  Hello

  I created a .vi I try to use to record several channels of data. I have implemented the user must be able to record data until the "STOP" button is pressed, then the data is saved in a spreadsheet file.

  Question No. 1: How to allow the user to store an indefinite amount of data?

  If you run the .vi as is, you will see that you are only able to collect 100 points, and registration takes place during Ms. I want to collect about 5 minutes worth of data and have a sampling frequency of 1 kHz.                 Any suggestions?

  Question 2: How can I change the worksheet file extension? Let's say I want than to save it as a .csv file?

  Thanks in advance for any pointers or suggestions!

  I have not looked at your code, but only based on your description I would implement a producer/consumer to save your data.  You must acquire your data in a loop (the producer) and send to your loop of logging (the consumer) using a queue.  Yes, you must save the data, then that is acquired.  In this way, you do not have to worry about storage who knows how much data in RAM.  It's just the disk as soon as he can.

  You can save the file with whatever the desired extension.  If you want it to be a CSV file, then do the extension a .csv.

• Win7 Ultimate Media Center Edition. Two channels ATSC displays only when I hit 'Record', otherwise 'channel not found', full strength 5 bar

  In the Seattle area, when I tune the channel 7.1 and 7.2 in the settings of signal strength, I still see 5 bars. It's the local affiliate CBS, KIRO.

  I have a HVR2250 dual tuner PCIe Hauppauge tuner card which has worked flawlessly for about a year. The drivers are current, 8851 dated June 2013. He also runs the current WinTV7 version 2. 8A. I do not use the Hauppauge app generally and it's not usually loaded with the exception of the tests. There is no shows at the request of record with WinTV7, although I could test records programmed successfully using this application.

  When I adjust the Guide, or by browsing the channels, MCE says no signal received 7.1 and 7.2.

  When I adjust everything first to one of them in the 10-15 seconds avant-erreur MCE 'no signal', if I reached the record, the channel is immediately blocked, including digital video and audio Dolby, and the program starts recording. I can stop recording, and as long as I don't change away from this channel, it remains fully functional with clear reception.

  I'm on a hill and have the correct line of the broadcasting antenna site about 12 miles away. I can also have this channel without problem on WinTV7 app by Hauppage, and setting my Samsung tuner screen, indicate both maximum resistance.

  The biggest problem is that the series on the logging sometimes channel show "available channel", and does not record successfully. If I manually start recording, it works every time.

  Is there any settings I can adjust to decrease the sensitivity required in MCE?

  Hi Scott,.

  According to the above mentioned the question on the Media Center, I have some suggestions for you so that you can go ahead and try see if this can help you.

  Method 1:

  Try the steps as indicated by "Cliffskier", who responded on 24 September 2012 in this thread:
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Centre-unable-to-to-watch-live-TV-but-can/3f093264-A811-4106-81d6-75e6434c1aad?page=2

  Method 2:

  Try us to update or download the list of guide for the media center. While we ensure that we have the list of guide updates and channels. After completing the above step, then try to search for and implemented.
  http://Windows.Microsoft.com/en-us/Windows7/use-the-guide-in-Windows-Media-Center

  For more information:
  http://Windows.Microsoft.com/en-us/Windows7/record-TV-in-Windows-Media-Center
  http://Windows.Microsoft.com/en-us/Windows7/watching-TV-in-Windows-Media-Center-frequently-asked-questions
  http://Windows.Microsoft.com/en-us/Windows7/TV-signals-that-are-supported-by-Windows-Media-Center

  Hope this solves the problem. If the problem persists, you can write back to us information and we will be happy to help you further.
  Thank you.

• How to record the addresses of email on my iPad

  Hello

  How to record the addresses of e-mail of others and mine on my iPad?

  Thank you

  One way to do this is to go to Contacts and click on the sign more. You can then type a name for your contact and then press 'Add an email' to display the email field. In addition, if you are on iOS 9 on your iPad (settings > general > about and check the Version) you can add email to the Contacts directly from Mail addresses. When Mail detects a new contact it shows a small banner at the top of the message, and if you type you have the option to create a new contact or to add the new e-mail address for an existing contact.

• How to record the line with mbp and el capitan

  How can I burn online with a MBP 15 beginning and El Capitan?

  Set the audio input of your computer...

  How to record audio on Mac OS X EL Capitan

• In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

  In the Photos of El Capitan how to record a double published in a separate with its own name and the ID file file?

  Only by exporting - with Photos (and iPhoto and Aperture) - you can have several versions of an image by duplicating the image (control - D), but this does not create an image file separated until you export - it creates a separate edit list in the database that applies to the original when you watch or export the photos

  Photos as it were its predecessors is a non-destructive control Digital Asset Manager (DAM) which does not any changes to files in the database but built a list of validation

  LN

• How to record from Apple Store invoice in the office?

  Apple Store Canada, I bought a backlit keyboard Logitech CREATE for my iPad Pro - in order to register my product with them that I need to download the invoice and all the Apple site offers is to print it.

  How to record on my desk, preferably in a .pdf file?

  Well, to answer my own question, it is not directly possible, unless you have Windows 10 and then you can print to PDF which would open the Bill in Acrobat Reader or DC or something else, and then you can save it.

  There is a free application that you can download on other systems.  I shouldn't advertise, but it starts with the c Word and ends in pdf.

  Who is achieving the same goal.

  Of course, the best response of all would Apple allow to record the invoice directly in PDF format.  Which shouldn't be too difficult for them to do, no doubt?   In hindsight I see that this has been a perennial question.   Sorry I can't offer any suggestions for Mac or iOS that I don't know if there is.

• Satellite A300 - how to record audio from Internet?

  Hello world.

  My friend has a Satellite A300 and wondered if someone knows how to record music on the Internet. Any help appreciated Toshiba experts

  Hello

  Personally, I don't do any music recording from the internet. I download if I like it. You can do a Google search and find a software to record either by the way, I found an article from the Toshiba support page:

  http://APS2.toshiba-tro.de/KB0/TSB8A02HA0000R01.htm

• Satellite L300: How to record the sound from a video without sound

  OK, yes the title of the topic is not entirely clear. Here's my situation: I just bought a Toshiba Satellite L300 with Vista; Realtek HD Audio Manager is installed. I would like to record the sound of a video file using Goldwave (a sound editing program); but I don't want to have to listen to the sound, while it's recording.

  On Windows XP, you used to be able to record the sound of the stereo mix, but put the speakers on mute and it would record again. Now I find that I have to turn my speakers in order to record anything on my computer. (Yes, I fiddled with all mute buttons, insured that all reading and recording devices are working and front volumes. My current solution is to plug my headphones on my laptop and to reactivate the sound from the speakers to register... and not put the headphones in my ears)

  I have now spent in the last 4 hours looking for a solution, and I must say it's especially ridiculous. I used Vista before and I've heard rumors of how many people hate, but honestly, how is it that now the audio capabilities seem to be reduced?

  Does anyone have a solution of how to record sound with the speakers on mute?

  Hello

  I also recorded the audio of a video file using another software called 32. and Win XP
  I also used the stereo mix, but to be honest I have never muted the speakers while recording.
  To be honest I n don't know if it's possible, but if you want to test, you can try the Realtek HD audio Manager in the access panel and set the speakers to cut on the first tab called speaker.
  But as I said, I've never tested and that's why I m not very good if it will work.

• How to create a channel for a PXI-6509

  I'm working on a program to fight the PXI-6509. The only area that I have problems with creates the string by calling the function DAQmxCreateDOChan. I get no errors during the first DAQmxCreateTask, but get an error when you try to create the channel. Exactly how to create the channel name? In MAX, I have named the "DIO" device, do not know if it matters. Any help would be greatly appreciated.

  Hi schelgr,

  Have you had a glance examples DAQmx in finder example found in help > find examples.  In input and output equipment > DAQmx there is a lot of examples that should be able to help with this query.

  Concerning

• How to convert an analog signal into digital signal

  Hello

  How to convert an analog signal into digital signal, such that each sample of the analogue signal corresponding to 1.2V will be represented as '1' digital signal and other samples of the analog signal (which are not 1.2V) will be represented (converted) ' 0' in the digital signal.

  And how to view the wavefroms or graphical indicators signals.

  Thank you.

  If you have 1000 samples and you want to convert to digital, you get 1000 digital values.  Attached, that's what I mean.

• How to use 1-channel analog input for start/stop aquire sample second channel input analog?

  I have a little problem. I've just been programming in labview for 2 weeks.

  I'm trying to figure out how to use my channel of analog input on the USB-6009 case for start/stop (reference trigger and start) presented to the second analog input channel samples.

  I need the first analog input string to operate continuously and control sampling on the second.  When the second channel will start sampling program brings a new graph each time and saves it (I have all this that figure out).

  How can I configure the trigger so the lance program presented in for the second channel when the 1 channel reached above 2V (e.g.) and stop when it falls below 2V.

  I use a pressure force sensor on the first channel that gives me straight (up to) 5 V when it is pressed and nothing when it is not...

  Thank you.

  Grand... Thanks for the information!

  But can't I then make a 1 channel instead and wait until that meat of the max element value?

• How can I turn my signal on my toshiba L650 wireless

  How can I turn my signal on my toshiba L650 wireless

  Hi Troytttt,

  1 Windows operating system you are using?

  2. what happens exactly with your wireless connection?

  3. have you updated the drivers for wireless card?

  You can visit the following links and check if it helps:

  Troubleshoot low wireless signal quality

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-low-wireless-signal-quality-problems

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks