to convert decimal table table of Boolean

Similar Questions

• Number of 1s or 0s in a table of Boolean

  How to find the number of 1s or 0s to an array of Boolean. for example in 101011, ago four 1s and 0 two s.

  Hello

  Thanks to you all.

  I just got an idea and his work. It's better, I want to share with you.

  1. Convert the table of Boolean 0, 1 (available in boolean labiew)
  2. Just to summarize these 0, 1, using arithmetic sum
  3. Comapre the sum with half of the number of channels.
  4. If the sum is greater than or equal to, its ok

  Thank you.

• generate the subset of the decimal table to an array of Boolean

  I have a decimal table 1 2 3 4 5 6, and I have a boolean with the same table size 0 1 0 1 1 0.

  How can I retrieve the subset of the decimal table of the corresponding "1" position of the table of Boolean (in this case 5 4 2)?

  The value of the Boolean table are editable (casting either 1 00100), so the size of the array decimal subset is not fixed (1, 4).

  (I assume you mean digital Board. "Décimal" is just a specification of formatting and irrelevant for this)

  Try something like the following (the FALSE case has just wired table in the whole unchanged):

  

  (In case you're dealing with huge paintings, a few performance modifications should be made so that everything goes more in place.)

  (Sorry for the spelling errors, ignore them )

• Convert 2D array of strings of digits in decimal table 2D

  How to convert an array of strings of decimal places decimal table 2D 2D?

  Thanks in advance

  

  -DP

  BatchTest Corp.

  NEITHER Alliance Partner

• How to convert the string with numbers in the table of Boolean 2D

  Hello

  I have input a string with comma separated numbers 1,192 (starting at 1).

  This string must be converted to a table 2D-boolean. Each number that appears should be true, not true rest.

  The 2D table consists of 4 times of 0.47 Boolean values.

  1.48--> [0.47] numbers [0]
  49.96--> [0.47] numbers [1]
  Numbers 97.144--> [0.47] [2]
  145.192--> [0.47] numbers [3]

  If a '1, 49, 97 145' input string put all [0] [0.3] true.

  How can it be easy/fast resolved?

  Thanks for help

  Break the string of numbers in a table of numbers.  (Spreasheet String to Array).

  In a loop For, index with each issue of this table.  Use in the range and Coerce to see if it is in the range of numbers.  (You can put this in a loop For as auto good indexing through the ranges).  If it's in the range, then use subset replace table to activate the corresponding item in a real.  If this is not the case, do nothing.  Maintain the table of Boolean in a shift register.

  Repeat this step for each number in your table.

  (What is a class assignment?)

• Convert 2d table in Jpeg format with intensity color ramp graphics

  I have a chart 2d of some size m x n I want to convert a jpg with the same resolution (IE, I want the jpg to have n x m pixels). I view this table 2d in a graph of intensity. I am currently using flatten pixmap to convert my table 2d in an image and then saving it as a jpg file. Unfortunately the colors don't come out like I want. If I try to use table of colors in the graph of the intensity of the colors come out correct, but erroneous values are associated with colors. I want the color scheme to match exactly what I see on the screen in the graph of the intensity of the jpg, but I want the full resolution of the 2d array.

  I've attached an example of what I'm doing. IntensityGraphColors.vi has a chart showing the table 2d with a color ramp special z-scale, this just vi takes the 2d table and the table of colors on the graph of the intensity and records them in a jpg of intensity. But when I save a jpg file colors come out different, as shown in test.jpg.

  Thanks for the help. I tried searching for similar questions, but could not find any solution that did what I wanted.

  Here is an example that goes from black to blue to white, which will tell you if all goes well in the right direction to do what you want with the entrance of "colors".

  Please note that the colors entry is ignored for the 24 bits of data.

• Table to convert 1 d of waveform (DBL); Convert the table to a 1 d of waveform (LDM)

  Hola a todos soy nuevo in LabVIEW asi os ruego patience, mi duda're basica y annoyingly, como hago para convert a table 1 d in una Forma Onda 'Waveform (DBL)', os editor una imagen y mi VI, Gracias.

  Hi all, I am new to using LabVIEW, so I beg you patience, my question is basic and simple, how to convert an array of 1 d in a waveform (DBL), thank you

  Table of index

  In my view, that the sound VI gives you a waveform for the right channel and one for the left.  For example, you may have to play with the index to determine which channel you want.

• convert a table to an xml file

  Hello

  I'm trying to convert a table that I got an http server to an xml file. So I'll be able to handle data with cvixml-lib. The problem are all special characters such as "<" or="" "="">". For example, the code for.<" is="" "<".="" do="" i="" have="" to="" write="" an="" own="" parser="" for="" all="" this="" 5="" spezial="" characters="" or="" is="" there="" a="" nice="" function="" can="" do="" this="" for="">

  I use CVI 2012.

  Thank you very much!

  OK, the right question is: 'how to convert html to xml.

  Here's how I did it:

  I hope that helps!

    while ( paSource[iAktuellePosSource] > 0 )
    // while no end of string continue with loop
    {
      if ( paSource[iAktuellePosSource] == '&' )
      { // a new escape seq was found!
        switch ( paSource[ iAktuellePosSource + 1 ] )
        {
          case 'l':
            // found < -> replace with <
            paDestination[ iAktuellePosDes ] = '<';
            iAktuellePosSource += 4;
          break;
          case 'g':
            // found > -> replace with >
            paDestination[ iAktuellePosDes ] = '>';
            iAktuellePosSource += 4;
          break;
          case 'a':
            if ( paSource[ iAktuellePosSource + 2 ] == 'm' )
            {
              // found & -> replace with &
              paDestination[ iAktuellePosDes ] = '&';
              iAktuellePosSource += 5;
            }
            else
            {
              // found ' -> replace with '
              paDestination[ iAktuellePosDes ] = '\'';
              iAktuellePosSource += 6;
            }
          break;
          case 'q':
            // found &qout; -> replace with "
            paDestination[ iAktuellePosDes ] = '"';
            iAktuellePosSource += 6;
          break;
        }
  
      }
      else
      {
        // normal sign just copy
        paDestination[ iAktuellePosDes ] = paSource[ iAktuellePosSource ];
        ++iAktuellePosSource;
      }
      ++iAktuellePosDes;
    }
  

• Y at - it an easy way to convert a 'table 1 d of channels' to a '2d array of unsigned bytes (U8-8 bit wide).

  Y at - it an easy way to convert a 'table 1 d of channels' to a '2d unsigned byte array"(U8-8 bit wide).

  Hi chuck72352,

  It should work.

  Mike

• How to convert a table 1 d of cluster of 5 items in a table of numbers 2D? (a graph historical data)

  Hello

  in my vi, I have an array with 5 slots displaying measurement data.

  The user must be able to record all the data in the history of the card at any time. (for example the user looks at the picture and something happens, then it based on a 'save' - button)

  I know that I can read the data in the history with a property node. This isn't the problem. The problem is, how to deal with the data? The type of history data is a table 1 d of cluster of 5 elements.

  I convert these data somehow in a 2 D-table of numbers or strings, so that I can easily save it to a text file.

  How to convert a table 1 d of cluster of 5 items in a table of numbers 2D?

  I use LabVIEW 7.1

  Johannes

  Hallo Johannes,

  the photo shows the trivial way:

  

• How to convert * all * tables of text in a document?

  Version: Indesign CS 5.5

  I have a massive document that was given to me after be imported into Word, and the person who has imported, it did not convert tables to text (or they tried and it did not work, be it, I have a huge amount of tables that must be not filed).

  I am responsible for the document formatting, and the formatting requirements are to convert all tables in the text document. I was able to batch-process other formatted in the document with the help of find + replace, but I can't seem to find a way to search for all instances of a table in the document and convert all the table set in shape to the text. I can find every table in the search/replace tool using < 0016 >, but I have no idea how, and then delete the table set shaped with the change function.

  I have no text special requirements (standard; tabs for columns and new paragraphs for the lines) and all tables should be converted, regardless of their formatting or content, so it's fairly simple formatting.

  There must be SOME way tot automate this process, it seems incredibly Loïc having to select each table individually and go up to the menu to select "convert table to text... '. ». Any idea is appreciated.

  Click on the text cursor in your text running, and then run this Javascript. WARNING: fully typed memory!

  App.Selection [0].parentStory.tables.everyItem () .convertToText ();

• Can I convert a table to a partion in an array of partitoned quickly?

  Hello
  
  We have 2 tables, one is the transactions table, and the other is table to archive transaction.
  Both have the same columns and indexes, but transaction archive table is a partition table stood by transaction date.
  
  Each week, we need to move the data from the transactions table to archive the table, and he needs about 2 hours.
  (add the partition, then insert into the partition by select * transaction)
  
  Oracle has the function to convert a table to a partition to a partition table?
  (just like the opposite direction of the EXCHANGE PARTITION)
  
  Thank you
  
  ARO
  Patrick

  Oracle has the function to convert a table to a partition to a partition table?

  It seems that you want to move ALL the rows in the transaction table in the table to archive.

  Why not do
  a. Add an empty Partition
  b. remove unnecessary indexes on table txn (index who are not in the table to archive)
  c. Swap Partition: ALTER TABLE EXCHANGE PARTITION WITH TABLE newpartition archivetable txntable;
  d. create a new txntable that is empty
  e. create indexes if necessary

  PS: If really do you move all the lines from the operating table to the table to archive, it would be the REMOVAL of the operating table that would take the most time, undo and redo.

  Hemant K Collette

  Published by: Hemant K grapple on June 1st, 2010 16:34

• little binary string in array (of TCP read) to the table of Boolean LV (and back)

  I would like to ask what is the easiest way for the next conversion? We use aTCP Read function to read an incoming binary string to a S7 API using LabVIEW. We know that LabVIEW stores a Boolean value to 8 bits. The incoming binary string contains 14 bits (representing 14 indicators of status). What is the best way to convert these values of 14-bit LabVIEW Boolean table?

  In addition, we send a LAbVIEW Boolean table in the PLC data (to write a TCP) string containing status bits.

  Thank you very much!

  Martins wrote:

  This 30 bytes contains some data more, including 14 bit flags (size is 14 bits). Since the PLC cannot put 'together' (16-bit) words at his side before sending data TCP, 14 bits is padded with 2 bits holding no valueable info.

  Then the solution is simple.  Take your 2 bytes and unflatten in a U16.  Then use Boolean table number.

• Convert a table to a cluster of 4 elements array values 2D 2D double precision, or a table 1 d

  Y at - it an easy way to convert a 2D cluster table (4 elements each including a Boolean value and three numbers dbl) to a table 2D or 1 d of double precision values? I need to store my data in a text file to control a robot, I'm trying.

  Thank you.

  There are 1 million different ways to do it. The best thing to do would be to leave the data exactly as it is and simply use Flatten in XML format (search the palette). It accepts virtually any type of data, including a 2D cluster table as you described. He will spit human readable (although not necessarily nice) text that you can write to a text file. Then, read you data from the file and use Unflatten of XML to do the reverse.

  Or you can use a similar model to flatten your data in a 1 d of double table which you can then unflatten.

  

• divide table of Boolean

  Hi Sir, I want to ask how to divide an array of Boolean 1 d. for example, I want to put the first 32 bits in column 1, then the 2nd column to and so on... I just want to have a table 2D-32 bits-per-cell... Thank you

  Here is the code of remodel simpler that buffers the last line if necessary.

  

  If you can ensure that the size is divisible by 32, or if you want to ignore the incomplete lines, just wire the 'QI' output directly to the larger size of entry and take additional math.

  If you subsequently want to process 32 elements at the same time, remodeling in 32 lines is much more convenient, for example using autoindexing in a loop FOR, a line of treatment at the same time. Of course, if you want the columns instead, convert after that remodeling as already mentioned.