To what size, we can use if and else in HFM statements rules?

Similar Questions

• Hello team, I'm NBNCo and we trueup contract with adobe. Please let me know what all software can be downloaded and used under this contract

  Hello team, I'm NBNCo and we trueup contract with adobe. Please let me know what all software can be downloaded and used under this contract.

  Hey Ashok,

  Please contact support for details of the software, as the same cannot be provided without any detail of the Ordinance on public forums.

  Contact the customer service

  Kind regards

  Sheena

• Do you think new MacBook 12 "can use Lightroom and Photoshop cc?

  Hello

  Do you think that the new MacBook 12 "can use Lightroom and Photoshop cc? I'm about to see buy this MacBook.

  Thank you for your advice.

  Best regards

  Vivianne

  It should work. For a few intensive processor image adjustments, it may trolling, but take a cup of tea and coffee. Ditto on the generation of said images of 1:1 of the big RAW files. But I opened Lr CC right now on a 2009 Core Duo MBP 13 "and it works. Jackpot is important and this will be slower that say a high-end 15 "or iMac, retina, but for what?

  And BTW, the screen RESOLUTION is huge.

  Consider that a MBP 17 "has a resolution of 1920 x 1200. It is decidedly old school.

  12 "has a retina display, at the native resolution of 2304 x 1440 to 226 ppi. This is how many things on the screen. Almost as much as an ordinary 2.5 k iMac. Yes, the pictures would be smaller, but you just get the thing... which is easier because it is smaller. His retina at 15 "of your eyes, which means that it is as close as you can get before you see pixels. Then you'd see a ton in addition to your image at 1:1 without scrolling autour, and yet the menus and icons Lr would be regular size of Mac. They would be the crowd a little more obviously than on a 15 "screen, but you'd still see tons.

  And BTW, you can also run a 4 k monitor it.

• How can I reset the old my wife's phone so I can use it and she can not remember any password or ID

  How can I reset the old my wife's phone so I can use it and she can not remember any password or ID

  Here are instructions, but she will need to recover his password: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Help find the ID and the password: https://iforgot.apple.com/appleid#! & section = appleid

• External hard drive suddenly cannot open it give the message error "you must format the disk in the drive until you can use it", and your hard disk is 0 bytes

  External hard drive can not suddenly open - fixed

  my external hard drive worked very well all the time, but suddenly I can't open it more, when I tried to open it, it gives the error message "You must format the disk in the drive until you can use it" and my hard drive is 0 bytes, average there is no file in the hard drive. Average, all the data inside hard disk are gone!

  Hello muhammad.

  Before you do anything with this player, you can search online for some data recovery utilities so that you can try to recover your data.

  What operating system do you use?

  Have you tried running chkdsk on the drive?

  Let us know.

  Best regards

  Matthew_Ha

• update my MacMini (2.4 GHz, memory 2 GB, OS x 10.6.8) to one who can use iCloud and newest iTunes?

  How would update my MacMini (2.4 GHz, memory 2 GB, OS x 10.6.8) to one who can use iCloud and newest iTunes?

  Yes, it seems to be a Mini 2010

  How to identify Mac - Support Apple mini models

  Upgrade

  http://www.Apple.com/OSX/how-to-upgrade/?CID=WWA-us-KWG-Mac

  However, with only 2 GB of RAM it will be slow. Your Mac supports 16 GB (2 x 8 GB). I would minutes to replace a strip of 1 GB with a key of 8 GB.

  This place sells compatible memory and provides installation videos. Macs are picky about the memory

  http://eShop.MacSales.com/installvideos/

  You can also replace the HD with a SSD to improve performance.

• I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you

  I have a toshiba laptop which has google chrome. The laptop has already installed adobe. My question, my computer will support creative cloud so that I can use Photoshop and Illustrator? Thank you

  Hi Julie

  You can check the minimum specifications here:system requirements | Cloud Creative

  Kind regards

  Guinot

• How can I put a cc photography plan to a comprehensive plan so I can use first and After Effects and other applications as well?

  How can I put a cc photography (Photoshop & Lightroom only) plan to a comprehensive plan so I can use first and After Effects and other applications as well?

  See to manage your membership and your payment. Cloud Creative

  'Change for an annual membership or membership full creative cloud'

• My mind is wiped out. I'll put up pages in Photoshop 9.0 to be then placed in InDesign 4.0 for professional printing. Can you help me configure the proper color settings, and what PDF preset to use. And output parameters, etc. Thanx.

  My mind is wiped out. I'll implement the color pages in Photoshop 9.0 to be then placed in InDesign 4.0 for commercial printing in book form. Can you help me with the settings of color in Photoshop, that is to incorporate the color profile; convert in space work, Adobe RGB, etc. and which PDF preset to use, i.e. printing, PDF / X - 1 or 3, etc. Also, what I have to select the output settings such as the conversion of colors with the Destination or the printer deals with that. I know I asked a lot, so thanks in advance for any input or advice.

  Best regards, ScottyB34

  What are the settings of your printer wants? Some may deal with sRGB some want Adobe RGB Ctrl/Cmd-Shift-k in Photoshop, then choose North Amercian prepress 2

  He'll take care of the tags for you, or if sRGB is important, Norh American General Purpose 2.

  Here is a summary of the settings PDF and their meaning:

  When you are ready to create a PDF file from an application such as Illustrator or InDesign Adobe, we give you a list of the predefined PDF settings from which to choose. Well how do you decide which is the right choice? Well, let me explain what they do.

  Let's start with the smallest file size and the name of the type of the story. It is compatible with Acrobat 6, which means that anyone who has Reader or Acrobat 6 or above will be able to open the file. Now it converts everything in sRGB color which is a common space for color monitor.

  All RGB is truncated to sRGB, CMYK and spot colors also. So that means if you have a job to print, you can see some color shifts in this outgoing PDF. You must decide whether it is acceptable. He can't stand live transparency, not flattened. It downsize image content to 100 pixels per inch and this is part of how she made a reduced file size. It also uses aggressive JPEG compression of poor quality on the content of the image. So, you can see some of these rectangular JPEG artifacts.

  But it is how it gives you a reduced file size, and results are appropriate to be posted online or attached to an email.

  High quality printing has compatibility with Acrobat 5 and above. There is no color conversion. RGB RGB stays, rest spot, stays of CMYK CMYK spot and it supports live, not flattened transparency. It does not perform some downsampling to 300 pixels per inch. So, for example, if you placed an image which was 300 ppi and then set to scale up to 50 percent there actually a res then 600 pixels per inch.

  Well, this process would take half out these pixels. Therefore, it can create larger files but that makes it suitable for in the House of printing or sending Let's say a remote office if they want to print we tell cells leaves, or brochures, or something like. It's beautiful out on an internal printer.

  Print quality and high quality printing have similar names, so this may be a bit confusing, but print quality has compatibility with Acrobat 5 or higher. It converts the content of RGB to CMYK destination values according to what you specify as the destination.

  It is usually SWOP, S-W-O-p. It supports live, not flattened transparency. It performs the subsampling bicubic to 300 pixels per inch and because that it keeps at least 300 pixels per inch, which means that it can create some large files, but it is suitable for professional printing.

  Then we start to get into the presets named 'X '. 'X' is now for Exchange. They agree on specifications and the idea is to have a set of specifications if a PDF file is compliant to these specifications, we know it's going to be printable.

  We know that imaging devices are going to treat them properly. So this goes back to 2001, and which can seem a bit old, but bear with me. PDF/X-1 has a compatibility with Acrobat 4. I know, it sounds old. It converts RGB to CMYK content, it keeps the content of good tones. It flattens transparency. Downsize it at 300 pixels per inch. It can large enough crat files if you have large size images in your project and that it is suitable for professional printing.

  The idea behind X-1 is if you send a PDF file to an unknown printer, you do not know what are their capabilities, you send abroad, it will be able to be photographed on any device. No matter the age, it is, they can print. Over the years, the concepts of Exchange became more sophisticated the workflow and devices become more sophisticated.

  SP PDF / X-3: 2002, remains compatible with Acrobat 4 and that means that it flattens transparency, but it does not perform any color conversion.

  This means that it maintains RGB content, place remains in place, rest of CMYK CMYK. He still performed bicubic downsampling at 300 pixels per inch, and therefore, it can create large files. But this is suitable for commercial printing, if the printer signals you that it is present RGB content is correct.

  PDF / X-4: 2008 is compatible with Acrobat 7 and later. See, we're getting more modern. No color conversion. RGB RGB stays, stays CMYK CMYK, spot rest spot and it supports live, not flattened transparency.

  He still performs bicubic downsampling. Therefore, it can create large files because it maintains the pieces of the image to 300 pixels per inch or higher and it is suitable for commercial printing, as long as the printer tells you that RGB content is not serious and dynamic transparency is acceptable. Some older workflow does not support dynamic transparency, or they treat well, and that's why always ask. It is a special case in Illustrator, something called default Illustrator. Its compatibility is Acrobat 6 or higher.

  It does not perform the color conversion, everything continues like this. It supports transparency live, not flattened, and it also contains the original, editable Illustrator file in the PDF file. It preserves layers and it may be return, can be reopened safely in Illustrator and it's really the only PDF format you can do with safely. But it can create larger files, because you sort of two files for the price of one, they sometimes get huge.

  So what predefined PDF is Right For You? Well, if you want to send for printing, the first thing you should do is to ask your printer how they want the created PDF.

  They should be able to give you the plug for the creation of the PDF file. They may be able to give you job options files you can simply import and use as your preset target. But if it's a stranger the printer or the printer for some reason any said, well, I don't know, just make a PDF and this happens, well, choose the lowest common denominator to the PDF/X-1 test. Anyone can image that. If it is a more modern printer and up to date, especially if you send it to someone who uses digital presses, PDF/X-4 should be safe.

  I always go back to point one, ask the printer. If you send it as an attachment or you're going to post online, well, smaller size of file is a pretty clear choice. But remember this, you can start with one of these predefined parameters, and you can always edit it to customize your specific needs. So get to know the presets, understand the destiny of the PDF you create, and then make the best PDF that you can.

• Hello, I just bought a 58 I want to know how to activate the face detection and in what mode I can use

  Hello, I just bought a 58 I want to know how to activate face detection and in what mode I can also use how to click pictures in mono

  Press the Fn key, select (smile/face detect.), then select the desired setting. When the exhibition is set to [Sweep Panorama] or [tele-zoom suite priority AE], [face detection] cannot be used.

  If my post answered your question, please mark it as "accept as a Solution.

• Equium M - 50 192: what RAM I can use to upgrade?

  Hello

  Does anyone know what I can use to upgrade RAM?

  I currently have 2 x 512 MB. Does this mean that all my slots are taken? I want to move to their maximum capacity (2 GB or more). I have to replace the two modules?

  The reason is that I was a little miffed to discover that my 128 MB of video RAM was infact static RAM. I guess that's my fault for not asking the right questions...

  Now, I do a lot of video editing and games. If I increase the RAM will be her claim to improve performance?

  Hello

  I checked the properties of this device and it seems that it of possible to upgrade the memory for max 2048 MB.
  There are 2 available memory slots, and you can use the modules of memory 2x1024Mo.
  These modules are supported:
  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  Hope I could help.

• Vista - when an UPDATE in Windows Update History, shows what CANCELLED anyway can put back and install it?

  When an UPDATE in Windows Update History, BY what CANCELLED shows can still bring it and install it?

  I have vista ultimate x 64.

  > what to try? Download and install?
  I wanted to say it's going to MS Updates Center and LOOK for the update you want. If found, it download it.

  > installation canceled, can bring the history of the UPDATE?

  I said "it will be displayed on the update the next time" .  I didn't say the history of updates.

  For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

• I try to install Production Studio CS3 so that I can use Ultra and the internet link to activate the product does not, nor is the work of phone numbers. How do I activate the product, so I can use it?

  Does anyone know the process of activation of a very old version (CS3)? I want to use Ultra and AFAIK, CS3 is the only version that works with.

  If someone can tell me how to use Ultra, which was delivered with version CS3, with CS5.5 or CS6, I would be grateful.

  Thank you

  Check your hosts file.

  to get help who and more info on the possible causes of the problem you encounter, errors in Sign, activation or connection. CS5.5 and later, Acrobat DC

• What adobe program can open, edit and save eps vector files?

  I have a burner that only accepts eps vector designs.  I need a program that can open the zipped eps files so I can view, edit and print these designs.  I need to leave them in the form of eps designs for use with my device.

  Thank you

  Joe

  Hello!

  Illustrator is an Adobe product that deals mainly with the foregoing. If you click on the blue link, it will show you the features and functionality of this product.

  Here is a vision a bit on the product vector files dealing with:

  -janelle

• How can I find and apply a new CSS rule

  I want to edit a css rule that currently leads the majority of my pages. The current rule is called ".twoColFixLTHdr #mainContent. The property I want to change to the new pages is the left margin of 250 pixels. I want to copy all the properties of the old rule and the new left margin change and apply this new rule CSS for only new pages.
  I was able to reproduce the old CSS rule and apply the change to the margin and rename the rule «.twoColFixLTHdr #mainContentArt» How can I find and apply this new rule to the new page?
  Thank you
  Lou

  First of all, it is always better to provide a link to your page, so people can see your code and CSS. Screenshots are rarely useful.

  If you double-click on the name of the file in the window Style CSS (you provided a jpg of it), it will bring up the interface and you can make changes to them here. If you click once, then right-click and select go to the Code, it will open the file in DW.

  I want to emphasize that these are "classes", and to apply you must identify them as such, for example

  So if you want, you can add the new class and apply it to the pages you wanted.

  I very strongly suggest you play with the code view, it will put things in a new light that makes life easeir.

  Gary