To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

Similar Questions

• HP Officejet Pro 8600 - Solution Center (or whatever his name with the 8600 series) does not start

  Dear all,

  Very frustrated with HP. I just bought a new HP Officejet Pro 8600.

  I install the software from the CD. It installs without problem

  I try to click on the icon 'HP Officejet pro 8600' and the solution Center (or whatever his name for this printer) applicatoin don't start/load - I see he's trying to do something for the first time, but no user interface is displayed.

  I have uninstall all HP software.

  I download all of the HPs site with HP printer software install wizard for windows - this is a utility that allows you to draw trouble and detecting good software of the printer.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?cc=us&LC=en&JumpID=ex_r4155/HHO/IPG/ccdoc/p...

  The software is properly detected and it installs without problem after download of HP

  Then, I click on the "HP Officejet pro 8600' in the office, the application software not load/boot. Yet once, it looks like somethings wants to start, but isn't that the UI never appears on the desktop

  I have unintall HP products

  I have uninstall Adobe flash 11

  I redo the steps of Installation Wizard printer and the same happesn (i.e. after a clean installation of the Solution Center for HP Officejet Pro 8600, I can't start the application)

  It's really frustrating.

  I use windows 7 64-bit.

  Can someone please help.

  Thank you

  printerPK.

  Hello everyone. I understand that you have to open the Printer Wizard. To troubleshoot the defective Printer Wizard, follow the steps described in this document from HP: http://support.hp.com/us-en/document/c03640384

  Note: The title of the document concludes that the program opens with a Script error. However, the troubleshooting steps are exactly the same. Essentially, the software needed to start the program was not installed successfully, or blocked.

  Please let know me when you are done troubleshooting. I'm only here to help!

  Mario

• Applications created with the Application generator does not start. It was after that I allowed the update install patches. Now the Version is 12.0.1f3 (32 bit)

  Help! Do not know what happened... I left the patch install the updater f3.  Now, when I create an application, it appears on the task bar (Windows 7) for a few seconds, then goes.  I don't know where to begin to understand this.

  Thank you

  Rich

  It is on the same computer.  The PC has the standard COMPUTER stuff.  VIper and they handle most of the firewall settings (windows).  I have turned them all off before installing.  I think it was a matter of execution engine.  I have no time to fight with LabView, so I uninstalled all LabView!  Then I made a new installation of the DVD.  This works.  I never install a patch of NOR without a week of free time!  In others, ever!  Whenever I do it, it takes me at least a day to get my operating environment!  Thanks for your time.  It is appreciated.

  Best regards

  Rich

• Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

  Hi all... I am a newbie with oracle database.,.

  I have the problem of monitoring:

  I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

  I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

  Installation-) before and during the hostname is localhost.

  (-) After the installation, I changed the host name in VMCentOS

  From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

  When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

  Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

  P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

  Hello

  It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

  When you install EA or there is no script that starts the database at startup.

  If you wish, you can create by yourself. For example search for instructions to Google how to create script.

  Kind regards

  Jari

• Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game. __Keyboard is very good

  Microsoft Pinball Arcade, everything works except the right flipper does not work when you run the game.
  Keyboard is fine.  Is this a compatibility issue?

  ---------------

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• The Task Manager does not start. I get a message "task manager has been disabled by your administrator".

  Original title: I deleted a virus from my computer but the Task Manager does not start.  I get a message "task manager has been disabled by your administrator".  Can someone tell me how to fix this.

  Task Manager

  Too bad!  I thought about it.  It has been disabled in the registry.

• the Task Manager does not start

  My laptop started running very slowly and I can't seem to start the Task Manager. Ctrl alt delete gives me the opportunity to start that I chose, but I don't get an inactive icon in my toolbar. I am running vista Home basic with service pack 1. When I restart or stop the laptop hangs at logging off-page. I also noticed that some of my applications/startup process are not start or appearing in my toolbar. I initially had Bit defender as my anti virus - but he exchanged for computer related. I had the problem with both.

  Hi Omanianne,

  Please read the following article from Microsoft Help on the Troubleshooting Task Manager.  Specifically, look at the sections of the Task Manager does not start, and How to enable the Task Manager if it has been disabled.  Based on the other symptoms you have described, it is very possible that you have some kind of virus.  Please make sure that your antivirus software is up to date and run a scan complete your system.  Please let us know if you have any problems or questions.  Thank you.

  http://windowshelp.Microsoft.com/Windows/en-us/help/28500b59-2acf-4FCF-8743-393c91915de81033.mspx#ebb

  Shane
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• transfer of data to the sd card does not start

  Hi all
  In the storage of settings on my Xperia Z2 section, there is an option "transfer of data to the sd card. It allows to work very well. Once the internal memory was terribly full, is come to a notification that says "75% full, data transfer to sd card" tried as always but this time it does not start. When I try to run within the parameters, also does not start.
  Any suggestions are appreciated.
  Thank you

  Use the file Commander app > cut > paste > on the SD card.

• the CreativeCloud application does not start.

  the application CreativeCloud does not start.  Deleted using uninstaller cloud creative, now impossible to install. do not run the program (( ))

  clean through the use of the Adobe Creative Cloud cleaning tool to solve installation problems

  Restart your computer

  Reinstall the cc desktop application, https://creative.adobe.com/products/creative-cloud

• 11.1 workstation, Windows 7 SP1 x 64, EFI, the CD-ROM does not start

  Is Windows 7 x 64 supported as an EFI guest OS in my computer with hardware 11.1 virtual v11?

  I recently upgraded from Workstation v9 to v11.1.0 build-2496824 under my Windows 7 SP1 x 64 machine and tried to create a new guest Windows 7 support EFI and the installation media does not start to get the Setup will.

  The same boot on any BIOS type invited media and I tried Windows 7 and Windows 7 with SP1 integrated all directly from Microsoft, not custom ISOs and none of them will work under EFI, but will work under BIOS.  In the same way 2008 and 2008 R2 media starts if EFI is used.

  EFI VMs can boot media of Windows 8 and successfully towards the top (2012 etc.) but not the previous generation of operating system.

  I tried a few different things, such as starting the ISO from a disk share and local network.

  I tried all 3 variants of the dvd/cdrom: SATA, SCSI, IDE, including the legacy mode which I don't think that is really work because it is not verified when I go back to change the setting.

  I tried to install from the EFI shell initialization, but the media are not yet mounted under blk0 so I can't go any further.

  My boot device options are all configured properly and tried to force the virtual cdrom boot at startup without success.

  I also tried going through the physical CD-ROM mapping rather than the ISO file and not luck.

  My Setup seems to be supported, however the matrix of interoperability and compatibility points vs EFI BIOS support.  I know that Windows 7 supports UEFI then it should work and I've seen posts where people have deployed it successfully under different versions of workstation using the EFI emulation.

  I also tried with hardware virtual v10

  Both typical and custom installation modes recognize media but can't can at start up.

  Should I do the start method USB with a sort of generation of personalized media?

  Here is an excerpt from the log file where it seems just that it's not picking up on startup even though we clearly see the ISO it:

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: connecting sata0:1 to 'D:\WIN7SP1X64ENT.iso '. Type = 2 distance = 0

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: DMG_Open: not a .dmg unencrypted file (footer signature 0 x 00000000).

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: DMG_Close: max cached entries 8

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: check the status of the original physical media...

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: CDROM: CDROM initial physical state is 1 (meaning)

  2015 03-27 T 13: 33:51.427 - 04:00 | vCPU-0 | I120: PolicyVMXFindPolicyKey: policy file does not exist.

  I just want to know if it is actually supported and if someone else has this problem there.

  It was about 3.5 GB but I just downloaded a new copy on the site MS VL and apparently boot into EFI now.  Don't know how the ISO precedent (and other ISOs 2008) would work under BIOS but not EFI but it's good enough for me.

  Thanks to confirm support of the scenario mentioned however, I had thoughts seconds on this subject.

• When the Active Server is shut down normally, the passive server does not start the service

  Hi friends,

  I have a question for the vCenter heartbeat,

  When the Active Server is shut down normally, the passive server does not start the service.

  Is this normal?

  Thank you.

  He starts the services on the passive server because the correct judgment still leaves the server active as being the "main".

  Stop all services of it properly. And after it comes back online replication starts as before, so that no service must be started on both servers. (in this case that you will have questions)

  Please note that on a server computer, you have 2 possibilities to "stopping down": the BONE and the option of status and control of the server Vcenter Heartbeat

  See you soon!

• Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you.

  Found "Save as model" grayed out and cannot save. Recorded with .dwt but saved them "model" does not present as a "site template. Can anyone help? Thank you

  I found the problem. I opened 'File' then saw 'save as template' grayed. Having not worked with models, I didn't know this isn't how it's done.

  What I should have done was file > save as > then clicked the drop-down 'Save as template' menu option. It was a simple mistake. Thanks to you all.

• What do you do when shift-click (on the wire automatically) does not work?

  All-

  I got shift-click for work with the loaded text icon, automatically thread text to the left of the white pages in the document.  But tonite, it won't work (and I remember once it didn't work either, and then somehow I him have had to work.)

  Any ideas?

  Thank you!

  Sunday morning

  In fact, I don't know how to display the hidden files on the Mac. Not even sure you can, but I think that SavedData will come in a search.

  The path is hard drive/users/Library/Caches/Adobe InDesign ///InDesign SavedData. Worst case, you can move the entire folder. He'll get rebuilt when you restart ID.

• [Solved] pc with xp home edition as the operating system does not start after installation of SP2 via automatic updates

  Hello everyone. After formatting my hard drive I reinstalled windows xp edition sp1 family and then installed the latest version of windows update agent. I have the auto update set to download the updates automatically and notify me when they are ready to be installed. Initially, he found 3 updates that I installed and rebooted. He concluded 58 updates. Again, I've installed and restarted. After that, we found ServicePack 2, I installed as well. But after the reboot, the pc does not start. What I get is the windows xp logo which discoloures after a few seconds and I don't see a bar moving from left to right. I left it like that for 3 hours, but nothing has changed. Also, it does not start in safe mode. I get a screen with red and green vertical lines in this case. Anyone know what's the problem? I'd appreciate any help. Thank you.

  I was finally able to solve this problem. That's what I did. I reinstalled windows xp home and followed the same path (but his definition of the automatic updates notify me before downloading or installing updates) until the automatic updates found in the new service pack 2. This time that I did not choose to download it. Instead I downloaded from here http://www.microsoft.com/en-us/download/details.aspx?id=28 and then started in safe mode and installed. I don't know one that makes the difference but service pack 2 has been successfully installed this time and tha pc was able to start after installation. Before that, I also downloaded and installed the latest versions of 2 drivers through drivermax. I mention this in the case where he has also made a difference. After the service pack 2 installation and restart, automatic updates will be found a few others brought up-to-date, but after installation and reboot, it found no others. I had to visit update windows Internet explore and search for updates it and managed to find other updates and finally SP3.