Too white in the transitions between images

Similar Questions

• CP9 sensitive project - where are the transitions between slides?

  Transitions between slides are available via the sync Panel when you create a blank project (unfounded).

  Where are the transitions between slides when you use a sensitive project? The distribution Board is not in the property inspector.

  Certainly, it is always possible to add a transition between slides for a sensitive project? If so, how?

  The slide transitions are not supported for projects of a reactive nature, they are not yet supported for the release of HTML5. The distribution panel is available (at least in the Expert user interface), you can apply a transition, but HTML5 Tracker will indicate that this is not a supported feature.

• variable names flash during the transition between slides

  In my Captivate 4 project, I view numbers slide as specified by system variables:

  $$cpInfoCurrentSlide$ $ $ $rdInfoSlideCount$ $

  I publish the project to an *.exe file, for playback with Flash Player 10.

  The transition from one slide to another, often (not always) instead of smoothly changing, say, '90 5' to ' 6 of 90 ", unfortunately flashing something else, which resembles the names of real variables, such as it is typed on it.»  No idea how to prevent this annoying flash to appear on the transition between slides?  Some transitions are very well, others are not.  Thank you.

  Hi Maury

  Are you part of the Adobe development team?

  Just curious.

  And FWIW, my legends who do this are actually placed to show 0 that you propose.

  I also had another thought. It was to the layer of an object to show and set to hide the legend and fade out. It would give the illusion of the legend fading in (and can prevent the momentary switch, we see where the variable is updated to show the value).

  See you soon... Rick

  Useful and practical links Captivate wish form/Bug report form Certified Adobe Captivate training SorcerStone blog Captivate eBooks

• The transition between presentations

  Hello.  I'm relatively new to this, but one thing that is disappointing is the screen black then white screen that appear before the next load of presentation.  And when a presentation has a dynamic content (news, RSS feed, etc.) while these areas are also black until they take over.

  Does anyone have any suggestions on how to avoid that it's looking like the screens are not working properly?

  Thank you

  Rose Ann

  Rose Ann,

  I didn't know the details of your DMM version code. 5.2 the prestressing is at a different location (see screenshot). You develop the Options tab, on the part of the centre-right.

  You can certainly improve to 5.2.1 (IF you want since it is the latest version of the code and some bug fixes more) implementation instructions and the release notes can be found at

  http://www.Cisco.com/en/us/partner/products/ps6681/tsd_products_support_series_home.html

  Note: The upgrade and the increase in preload can certianly solve your specific problem :-) But I've seen situations where increase the preload value has reduced the time between transitions.

  Kind regards

  Sagar Dhanrale

• JPEG files only print in black and white through the display of images

  I can print only JPEG stored in black and white using the Viewer. However the jpegs print in color whwn using photoshop

  What Viewer you use?

  They appear in color on the screen.

  Have you checked the setting according to your image to make sure that it is not set to print grayscale?

  James Wolf MS - MVP [Multimedia]

• The transition between two objects with color gradient

  Oh no! I want to make a smooth transition between objects of gradient color, but you can see a line. How can I make a smooth transition? It is not a transparant-gum... Please help me!

  

  try to use a gradient instead of the net?

  You can use the path search tool to convert forms in one section, then gradient to create the dark lines where are the current limits.

  Or you can use "pen" one of them, to blend the overlap, but you may need to add the pen to a slightly larger copy of the object and your current border point to create a mask in order to keep the edges you want to stay strong and just leave an edge of more than in the other form.

• You can display several photos on a single page with tool slide for the transition between them?

  Hi people,

  I have a series of pictures taken from the exact location, but on different dates. I would like to display on a single page, but to use a bar tools/drag to move or transition between photos. If the scroll bar can display the date of the photo, then that would be great.

  Is this possible in adobe?

  Any help would be great.

  Thank you.

  Such a device is not available, as you describe. You can create buttons that would show or hide photos, however, Acrobat Pro.

  If you work in Adobe InDesign, you can create a slide show using the States of objects, which are controlled by buttons to move forward or backward through the slide show. You can then save the effect as a SWF file and embed it in a PDF file. It's the only way I know to do with interactive PDF.

• Wait until the end of the transition between two images.

  I'm developing an ActionScript 3.0 for Blackberry Playbook application.

  I have twelve images loaded with a class Loader. I use Event.ENTER_FRAME melted and melted images using this event handler:

  private function onEnterFrame(event:Event):void
      {
          imageToFront.alpha += 0.1; // slow fade
          imageToBack.alpha -= 0.1;
  
          if( imageToFront.alpha >= 1.0 )
          {
              imageToFront.alpha = 1.0;
  
              // hide the first image
              imageToBack.alpha = 0.0;
              imageToBack.visible = false;
  
              // remove the enter frame event listener
              stage.removeEventListener( Event.ENTER_FRAME, onEnterFrame );
          }
      }
  

  When a user clicks an image his manager fundraising click the following:

  private function onImageClicked(event:MouseEvent):void
      {
          switch((event.currentTarget as Loader).name)
          {
              case imageCell11Back.name:
                  imageToFront = imageCell11Front;
                  imageToBack = imageCell11Back;
                  break;
              case imageCell11Front.name:
                  imageToFront = imageCell11Back;
                  imageToBack = imageCell11Front;
                  break;
              case imageCell12Back.name:
                  imageToFront = imageCell12Front;
                  imageToBack = imageCell12Back;
                  break;
              case imageCell12Front.name:
                  imageToFront = imageCell12Back;
                  imageToBack = imageCell12Front;
                  break;
              case imageCell13Back.name:
                  imageToFront = imageCell13Front;
                  imageToBack = imageCell13Back;
                  break;
              case imageCell13Front.name:
                  imageToFront = imageCell13Back;
                  imageToBack = imageCell13Front;
                  break;
              case imageCell21Back.name:
                  imageToFront = imageCell21Front;
                  imageToBack = imageCell21Back;
                  break;
              case imageCell21Front.name:
                  imageToFront = imageCell21Back;
                  imageToBack = imageCell21Front;
                  break;
              case imageCell22Back.name:
                  imageToFront = imageCell22Front;
                  imageToBack = imageCell22Back;
                  break;
              case imageCell22Front.name:
                  imageToFront = imageCell22Back;
                  imageToBack = imageCell22Front;
                  break;
              case imageCell23Back.name:
                  imageToFront = imageCell23Front;
                  imageToBack = imageCell23Back;
                  break;
              case imageCell23Front.name:
                  imageToFront = imageCell23Back;
                  imageToBack = imageCell23Front;
                  break;
          }
          stage.addEventListener(Event.ENTER_FRAME, onEnterFrame);
          imageToFront.visible = true;
      }
  

  I'm having the following problem:

  If the user clicks on another picture until the previous image did not reach this image with a less than 1.0 alpha to alpha = 1.0 left TI.

  In other words, I have to do something for the function onEnterFrame left the 1.0 alpha value.

  Any ideas?

  I tried with stage.hasEventListener (Event.ENTER_FRAME) to wait until the Manager came out, but it does not work (it's always return true).

  My solution:

  private function onEnterFrame(event:Event):void
      {
          imageToFront.alpha += 0.1; // slow fade
          imageToBack.alpha -= 0.1;
  
          if( imageToFront.alpha >= 1.0 )
          {
              imageToFront.alpha = 1.0;
  
              // hide the first image
              imageToBack.alpha = 0.0;
              imageToBack.visible = false;
  
              // remove the enter frame event listener
              stage.removeEventListener( Event.ENTER_FRAME, onEnterFrame );
              faddingCard = false;
          }
      }
  

  When a user clicks an image his manager fundraising click the following:

  private function onImageClicked(event:MouseEvent):void
      {
          if (faddingCard) return;
  
          switch((event.currentTarget as Loader).name)
          {
              case imageCell11Back.name:
                  imageToFront = imageCell11Front;
                  imageToBack = imageCell11Back;
                  break;
              case imageCell11Front.name:
                  imageToFront = imageCell11Back;
                  imageToBack = imageCell11Front;
                  break;
              case imageCell12Back.name:
                  imageToFront = imageCell12Front;
                  imageToBack = imageCell12Back;
                  break;
              case imageCell12Front.name:
                  imageToFront = imageCell12Back;
                  imageToBack = imageCell12Front;
                  break;
              case imageCell13Back.name:
                  imageToFront = imageCell13Front;
                  imageToBack = imageCell13Back;
                  break;
              case imageCell13Front.name:
                  imageToFront = imageCell13Back;
                  imageToBack = imageCell13Front;
                  break;
              case imageCell21Back.name:
                  imageToFront = imageCell21Front;
                  imageToBack = imageCell21Back;
                  break;
              case imageCell21Front.name:
                  imageToFront = imageCell21Back;
                  imageToBack = imageCell21Front;
                  break;
              case imageCell22Back.name:
                  imageToFront = imageCell22Front;
                  imageToBack = imageCell22Back;
                  break;
              case imageCell22Front.name:
                  imageToFront = imageCell22Back;
                  imageToBack = imageCell22Front;
                  break;
              case imageCell23Back.name:
                  imageToFront = imageCell23Front;
                  imageToBack = imageCell23Back;
                  break;
              case imageCell23Front.name:
                  imageToFront = imageCell23Back;
                  imageToBack = imageCell23Front;
                  break;
          }
          faddingCard = true;
          stage.addEventListener(Event.ENTER_FRAME, onEnterFrame);
          imageToFront.visible = true;
      }
  

  I added a class Boolean faddingCard variable to control when onImageClick is thrown.

  This solution is faster than Tweener or TweenLite.

  Thank you very much for your help.

• forcing of the transitions between slides

  Hello
  
  I imported a project from powerpoint, he adds audio. I distributed audio among the slides. I'm having a problem for the slides to automatically move to the next slide. I went into the properties of the slide, selected the type of transition used apply all to set the same for all the slides. But it still does not move to the next slide. As soon as the audio especially gliding finishes, it stops, and you press the next button to go to the next slide. Is there something I'm missing?
  
  John

  Hi John,.

  It seems to me that you may have imported your PPT with the option advance on mouse click. To check this test showing the timeline (see > display the editing window) see if you have a box click object. If so, select and press the delete key on your keyboard. Now do the same for the rest of the slides in your project file. Now when you preview the slide transitions must be triggered automatically.

  Greetings - Mark

• keynote address during registration how to make the transition between slides

  Hello

  I am doing a keynote presentation. When I recorded my first slide, I can't go to the next slide.

  To create a recorded slideshow:

  • Open the Keynote presentation and click slide 1 in the browser
  • go to: play > slide show folder
  • Click on the Red record button
  • after count down, press the SPACEBAR, whenever you want to move to the next slide or animation Keynote
  • Click on the Red record button to complete the registration
  • Press the ESC key to exit the record mode

• Is it possible to soften the transitions in a photo where the program automatically generates pixels that fall between two values of different color?

  Let's say you have an image with very harsh shadows or another type of abrupt changes in value. A domain is light, while the right of the box next to him has a darker value, without transition a lot in between. The values between the two are not enough to enjoy with the Clone Stamp tool. In addition, the smudge tool is not a desirable option because the results look too smooth and lacking in texture. Is there another way to soften the transition between these two areas involving Photoshop generation Pixel with a value that is between the sections of two colors?

  I don't think that you will never get good results. Reshooting with a proper lighting would be much easier, but here's an example of use of frequency separation. I duplicated the layer low pass and even more fuzzy then hidden in transition from shadow areas, as well as a few alterations on the high pass layer.

  

• The merger between the two images with the control points? Novice request

  Hi all

  I've seen a tutorial that describes exactly what I want to achieve, but can't for the life of me remember of it called or how to do it.

  Basically, I have two images of the map I want to put in a short film. During the transition between the images, instead of simply melted into a single image I want that they "sink" in the following image.

  The tutorial I've seen used Premiere Pro and "checkpoints" that match between the two images showing where things moved too.

  I am barking the wrong tree? I will reply cheerfully questions in an attempt to better describe this. I apologize for the vagueness of the topic.

  Tom

  For a quick and dirty overview using the track Matte Keying, see this glance for this purpose: https://vimeo.com/user17132571/review/69330020/8f4fc79c86

  Hunt

• Parts of the picture are small and the transitions of color too

  I am creating images of t-shirt and I have a problem: Spreadshirt says that my photos have very small objects in it, and they have too many different colors. (I can only contain 3) I want all the transitions between colors of color, but how to choose without going through a small spot of color in time? What is a way to remove only the transitions? And how to remove objects that are too small? Select same fill color does not work, or I'm doing it wrong. I also clicked on extend to solve a problem of text, do not know if it matters.

  Select objects:

  http://js4ai.blogspot.de/2009/02/new-script-select-paths-by-size.html

  If you need to combine the red and orange in one?

  Use ADSI > change color > Recolor art to unite all the colors.

  Then select all this stuff and use Pathfinder > unit.

• How to change the appearance of the number using images?

  Hello!

  I want to design a numbers on photoshop and make an animation count numbers.

  I have sucsess to do animation account numbers, but I don't know how to make the numbers I want.

  for example

  1 = 1. jpg / psd 1.

  2 = 1. jpg / psd 1.

  up to 9

  Ty!

  There is no automatic way to do a countdown to use images instead of numbers, but there is a solution.

  It is a type of advance but the here is one of the approaches that I could take.

  • Each of your images photoshop exports a separate numbered file their numbering from 1 to 9 and put them in the same folder
  • Open the dialog of the import in AE by double clicking on the project Panel or by selecting file > import > file and select one of the images in the order
  • Make sure part options open dialog is visible and check the box that says (any file type you choose) JPEG sequence is checked
  • Now add your images are a movie in the timeline with all images in order
  • Add your movie to image sequence to the timeline
  • Activate the time-remapping set up the synchronization of the images to change the speed that you want to change them

  There are several ways to control the speed of the movie you made from your images. You can set the frame rate in the interpretation of file or use time or use an expression to call a number of image based on time.

  You could also import all your images individually, drag them to the timeline and then set an out point to say 1 second for all layers, then the wizard from keyframe to the sequence of layers and even define an overlap and the transition between layers if you wish.

  To learn more about time remapping type time remapping in the search field help in the upper right of the AE and extract the help files. Do the same for the layers in sequence and the sequence of images if you need to.

• Drag the Transition Fade question

  Hello

  I'm having a strange slide transition problem.

  Basically, I put slide 18 in my with a fade transition project.

  Slide 17-> Fade Transition-> Slide 18

  When I click on slide 17 and then select "Preview"--> "This Slide" it looks great. The transition between the 17 and 18 is perfect.

  However, when I select 'Preview'-> 'Project' and make the transition between slides 17/18, it shows a very strange fade. I suspended the fade and took a screenshot. See the image attached below.

  It almost seems as if he has stacked 3 arbitrary slides on top of the other (slides 5, 11 and 12) and shows them curiously in the transition. I tried to copy and paste the project into a new project. I tried to publish the project as a SWF file (to see if it publishes this way). I have tried to rearrange the position of the slide, save, then edit and save. Nothing works.

  Does anyone have ideas on this? Thank you!

  

  Okay, I think I found a solution.

  I tried to copy the slide 5, for example, pasted into another window of project and then delete the original slide in the initial project. Then I copied the slide I pasted into another window of project and pasted in the original project. It did not work.

  My original approach was to address the slides which seemed to 'stack' on the faded transition. But I am not trying to work with the slide itself, where the transition was actually applied. That's the key.

  I have reproduced the slide that contained the transition, hiding the original, and then when the realistic preview and published SWF file, the behavior of a normal transition faded returned.

  I hope this helps someone else who has run or will run into something similar!