Tool to highlight in different colors on a base with a single click

Similar Questions

• How to highlight the different color field of the key

  Greetings

  I would like to insist on the diferent to the field button color. How this thing would be possble.

  Help, please

  concerning

  Anthony singh

  Check http://www.coderholic.com/blackberry-custom-button-field/

• Why have the pages I'm ongot different color square and oblong around their?

  There are all the different colors in places and oblong anywhere in the background of pages much. It is difficult to read the words.

  Someone active the option of flashing of painting in Firefox developer tools.

  • with Firefox open
  • Press the menu button on your phone
  • Select settings
  • Select the development tools
  • Uncheck the box flashing paint

• Why not recently seen sites show in a different color more?

  Yesterday I updated to Firefox 7.0.1 and now my sites recently seen show is no longer in a different color after the display of a Web site and return to the initial list of Web sites. I still want to see which ones I've looked at the research. Can you tell me how to recover this feature again?

  If you talk about the differences in color between visited and not visited in the links on your Web pages as that would be affected by what follows:

  1. change the link colors in your tools > Options > content > fonts and colors: 'Advanced' for which I have blue for Unvisited and magenta for unvisited links. I have all three elements selected "use system colors:," underline links: and 'Allow pages to choose their own colors, instead of my selections above'. "
  2. Data loss in history, such as deleting your browsing history
     • http://img232.imageshack.us/img232/4928/clearcachew.PNG
  3. Private browsing ("Ctrl + Shift + P") will mark all as visited links, even apply to the permanent Private Browsing ("always use private browsing mode") in tools > Options > privacy
     • http://img232.imageshack.us/img232/4928/clearcachew.PNG

  I let him out on the following link and added it, but given what precedes has answered the question, I'm changing that last part a page footnote.

  Which none would be directly related to the update of Firefox, but in these times where the file localstore.rdf in profile you may be affected (corrupted), and the changes made to your toolbars and options will not stick.

  • http://KB.mozillazine.org/Corrupt_localstore.RDF

• Shakes the screen & display different colors opening lid

  HY, need help...

  I've had this laptop for 2 years and never had any problems, but a few days when I move the screen to open, adjust or close the screen shakes and display different colors.
  Is there something I can do or is the time to take for repair?

  Thank you

  Hello

  In my opinion it s definitely a hardware problem.
  Either there is something wrong with the connection or the screen itself.

  It seems that you have no experience in the laptop repair and so there is no sense in doing this.
  First of all, I doubt that you have all the tools to check what part is affected and then you could damage other parts while removing the procedure.

  So I think that you should get in touch with local laptop technician and should first try to know what's exactly wrong
  Then you can decide what you would then do

  I mean the screen is one of the expensive components for laptop and possibly it s not worth buying a new

• I can see the highlights in each color, but yellow, green and blue.

  If if I try to highlight the text with one of the following colors does not color: yellow, yellow, green, green, blue and light blue.

  

  If I right click on the highlighted text and format the highlighting of a different color (for example, a darker yellow), I'll see the color.

  

  If I switch to one of the 6 colours or any variation (by clicking on "other colors" and adjusting the luminescence in the color wheel to something near a yellow or pale yellow for example (< = brightness 105)) the color will disappear and I'll only see the dotted lines of the highlight when selected.

  This makes unnecessary functionality to compare documents that I receive a document marked with dots highlights "without color".

  Does anyone have suggestions as to how I might solve this problem?

  Solved. I found the answer elsewhere. Go in Edition > Preferences > accessibility. Uncheck "replace the colors in the document.

• Interpolation of shape with different colors of lines

  Hello, I just created a simple shape tween, and I am very satisfied with the appearance of the interpolation. However, the borders of the shape are two different colors. On the first and last frame of the tween, the colors are correct, however in the frames between, all lines are the same color, which in fact stand out from the rest of the form. Is there a way to stop flash to change the colors of the Tween? It has been designed using the online tool.

  put the border, then fill in the different layers.  convert each symbol if you want to use interpolations of movement on each or if you don't want to interpolate the border, you should not convert.

• Is it posible to highlight more than colored keys at the same time?

  Hello.

  IAM, trying to figure out, first, that is the keyboard shortcut to highlight the text?

  seoundly: is it posible to make colors more resolved, so that I could have two or different colors ready tree in the shortcurbar, without having to define manually everytime.

  Cordially Albert

  Hello

  Please see this link for the shortcut keys: keyboard shortcuts for Adobe Acrobat DC

  For more resolved colors - select the text to be highlighted, then right click and select properties from drop down.

  Here, you can select different colors to highlight.

  Let me know if you encounter any problem.

  Kind regards

  Meenakshi

• Text has a different color is selected, describing letters

  When I use the text tool, sometimes (and it is only sometimes, but I can't understand what makes) there is an outline of a different color.

  Here is a picture of what's going on, http://imgur.com/gallery/7Jf9cKg

  I want the text to be entirely this color blue, but for some reason, there is a red outline. Anyone can shed light on what is happening?

  Thank you!

  What happens if you Alt click on the Type layer icon to turn off all other layers?  Or if you right-click and choose Duplicate layer and use the drop-down list and select new?

• You will need to fill color different colors in the same plane. How can I do?

  I am new to Illustrator, so I apologize in advance for this simple question, but I searched and can't find an answer.

  I have outlined a few letters and you want to fill different colors inside, as on the logo that I attached below.

  How can I do the simplest? Tried it with the pen tool, make a circle, then using pathfinder, but can't make it work.

  

  Thanks in advance for your help

  There are many ways to do it.

  Perhaps the easiest and most direct way to create a gradient, but you would need to edit a lot of stops/nodes (points of color)

  Instead,.

  Dig, make a PATTERN and using PATHS of CLIPPING (as a mask for clipping in Photoshop).

  In this way, you can change the model, the position and the angle of your stripes easily.

  Here's a way to do it:

  1 CREATE A PATTERN.

  I created a series of rectangles with the approximately the shape and color, I want to repeat

  

  2 MAKE A NEW RECTANGLE AND APPLY THE TEMPLATE

  This goes in the same layer as your chart

  

  3. with your graphic (path) above the rectangle (path) in the same layer, MAKE a MASK of CLIPPING

  

  4. Rotate the rectangle (make sure you have "transformation plan" turned on)

  

• How can I "attached to tab" summits on an empty right triangle with 3 sides of a different color?

  Hello. Novice HERE. I want to create a right triangle (just three sides, no fill) where each side is a different color (red, blue and green, say). For generality, assume that it is a scalene triangle (rather than isosceles). I want the weight of each line to be about 3 PT (but I guess that's not a crucial number. Let's say that the I want the sides to 20 or 30 thick pts, for the fun of it.) I know how to draw three lines of specified width, make different colors and arrange them in a triangle. My problem is how the vertices (corners) look at attached miter instead of have them overlap, which obviously has terrible air and as something of an infant caught in Microsoft Paint. ;-) If I join the 3 trails in a single form, they are all getting the same color, so I think I should keep as 3 separate lines (paths). The only solution I can think is: rather than draw three lines of weight 3pt, draw three extremely thin rectangle shapes (about 3pt wide), one of each color and do rotate/position them so that they form the sides of a triangle. Then go and do a Visual surgery on the tops to make summits attached miter. Is there an easier or more automated way to reach my goal? Is the answer right under my nose? Thanks in advance!

  1. with the pen tool draw the right scalene triangle.

  2. choose the desired race weight, no fill.

  3 object > Expand stroke.

  4. with the scissors tool, click on all six anchor points.

  5 object > ungroup (CMD/CTRL + SHIFT + G), object > Compound Path > release (CMD/CTRL + OPT / ALT + SHIFT + 8)

  6. Select the pair of line for a leg segment, object > path > join (CMD/CTRL + J) twice; Repeat for the other leg and the hypotenuse.

  7. fill each path with the desired color.

• Same colours appear as different colors

  Hello

  I created different graphics, I imported to the title of Framemaker.  They were all pieces of our color (CMYK 100, 0, 0, 0) that all displays them properly.  If I create an object in Framemaker using a custom color, it displays fine, but when I pdf, it is a different color.

  Here is an example:

  http://img818.imageshack.us/img818/4907/20120529112907.PNG

  The upper band is the right color, but the text appears in a different shade.

  Color logo is correct, but the line and the Strip on the right, that I created in Framemaker, is a strange blue.

  Any ideas?

  I assume you are using Windows.

  1 framework has no color management and will never, we are told.

  2. Windows trashes CMYK, even Vista SP1 and later with fake CMYK.

  If you must use CMYK, import all of these objects in EPS. Mr. Bill's GDI don't mess with those.

  The other alternative is to take a RGB color space and distill to mark all the images for the color management, stating that the space in the value. Then knit that the input RGB values create values of RGB final desired.

  CMYK 100-0-0-0 may be out of gamut for reasonable RGB, sRGB esp systems.

  Get the color of the text based on other objects of color is problematic. If you tag everything for color management, black text is rendered in composite black - slow, huge and not really black.

  There are probably tools of alternatives for correcting the colors in the PDF files.

• How to create a logo with the letters in 2 different colors

  I need help with a logo. I am trying to create a logo were it is as if a light shines on the type then part letters are in 2 different colors.

  Set the type by using the text of point tool (meaning click then type, no click-drag-release then type). Using objects of type two, one for each line.

  

  Draw the path of the light with the pen tool, fill it with yellow and move it to the back (object > Arrange > Send to back).

  

  Select the first line of text and the spotlight and go to object > clipping mask > make.

  

  Now simply select objects of type with the direct Selection (white arrow) tool and fill them with the blue wire.

  

• How can you make a single element in a CSS list a different color?

  Hello

  I created a CSS horizontal navigation bar and would like to know how I can have the title of the current page are displayed in a different color ('House' would be in a font while the other four or five headers in the navigation bar would have a few other common fonts), but I can't quite understand how to proceed.  It seems to be quite difficult given the dynamic nature of the present.

  Can anyone help?

  http://hicksdesign.co.UK/journal/highlighting-current-page-with-CSS

  Who will explain a simple sollution using CSS.

  It shows how to select a particular piece of nav using ID in your HTML code on the list item and the body tag, and then using this combination to write a CSS rule to target the element of list on a particular page.

  Martin

• Can I make Apple Notes different colors?

  Can I enter records in different colors Notes of Apple?

  If so, they will download to iCloud?

  I'm afraid, it is not possible- notes on iPhone, iPad and iPod touch - Apple Support.

  Inform Apple - http://www.apple.com/feedback/