Shakes the screen & display different colors opening lid

HY, need help...

I've had this laptop for 2 years and never had any problems, but a few days when I move the screen to open, adjust or close the screen shakes and display different colors.
Is there something I can do or is the time to take for repair?

Thank you

Hello

In my opinion it s definitely a hardware problem.
Either there is something wrong with the connection or the screen itself.

It seems that you have no experience in the laptop repair and so there is no sense in doing this.
First of all, I doubt that you have all the tools to check what part is affected and then you could damage other parts while removing the procedure.

So I think that you should get in touch with local laptop technician and should first try to know what's exactly wrong
Then you can decide what you would then do

I mean the screen is one of the expensive components for laptop and possibly it s not worth buying a new

Tags: Toshiba

Similar Questions

  • use color and shake the screen and shrink

    well, some people on the vineyard and instagram use AE effects on sport clips and they use the color and they shake the screen and they reduce it too much and I just wanted to know what they use to do this

    I wanted to see if you guys could help because I wanted to know how to use After Effects to make this kind of video.

    Not much to say except that you must learn AE.

    Getting started with After Effects (CS4, CS5, CS5.5, CS6, & CC). After the effects of interest area

    Mylenium

  • Satellite Pro M10 - horizontal lines on the screen in different areas

    Hi all

    I hope someone can help.
    My Satellite Pro M10 seems to suffer a display problem where I have horizontal lines on the screen in different areas.
    It would be well for 10 minutes and when the laptop seems to warm up this problem begins, then shortly after
    The laptop would crash and enter in a resolution of 800 x 600 16 colors or sometimes freeze.

    Graphic drivers have been resettled, and even a new installation of Windows XP from the recovery CD does not help.
    A reboot doesn't solve what the same thing happens again and after one minute of use, so I thought it might be a video or cooling problem.
    I changed the video card I had a spare part of my last motherboard hoping this would solve the problems, but the problem persists.
    Perhaps a cooling problem? Or problems of motherboard?
    The motherboard has been replaced twice, hoping that this isn't another mobo problem.

    Any advice would be great.

    Thank you.

    Hello

    I m not 100% sure but to me it looks a bit like an overheating problem
    Maybe the graphics card may not be properly cooled after a certain period of time and that's why these strange horizontal lines appear on the screen.

    I wonder how you were able to replace the graphics chip on the motherboard?  :|
    If I m not wrong not the chip is fixed and the replacement is very easy and difficult

    It of always difficult to say what's maybe wrong without running several diagnostic tests in most cases this problem may be related to the defective chip or motherboard and so the following should be checked

    Sorry, but that's all I can suggest.

    Best regards from my friend

  • Unable to print using HP Officejet 4500 but the screen displays "BUSY".

    Through 'troubleshooting' and are still unable to print. The Start button flashes as usual, then nothing. BUT the screen displays "BUSY".

    OT:OfficeJet 4500

    Hello

    Thanks for posting your query in Microsoft Community.

    I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

    1. what operating system is installed on the computer?
    2 have. what troubleshooting measures you tried?

    You can download the drivers for the printer based on your operating system from the link provided below.

    Software & Driver Downloads HP Officejet 4500 all-in-One printer - G510a

    http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&LC=en&DLC=en&product=3919448

    For more information about troubleshooting steps, see:

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    Thanks for posting the results and let us know if you need help to solve the problem and we will be happy to help you.

  • When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

    When my computor starts, the screen displays administrator profressionelle of windows xp, I don't remember the password I had used and cannot log - need help

    The solution is here:

  • How we split the screen for different horizontal and vertical divisions

    Hello

    How we split the screen for different horizontal and vertical divisions. I can't use panelSplitter because I need fixed screen and not the division which is movable/sliding. I tried inlineframe, but which fails because you cannot use forms, other trees components... :(

    so I would like to know how to do division without panelSplitter.

    Thanks in advance,
    Jyothi

    Hi Jyothi,

    If you set the panelSplitter attribute disabled to true, the delimiter becomes permanent/mobile no.

    
    

    Kind regards
    Amélie Chan

  • Screen flashes different colors and freezes at the same time, there is a video card problem?

    When it gets really bad most of the screen will Blanch and freeze. This global problem cut in and out, but is common.
    Any help would be greatly appreciated.

    EDIT: I forgot to mention that it is a HP G62 laptop.

    Hello

    Yes, it could be a video card problem. Let me suggest that you run this Fix It routine: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems#.

    Let me know if this helps you.

    Kind regards

    BearPup

  • At startup, the screen displays two websites of mozilla instead of one, why?

    To start Mozilla, each time, two sites of Mozilla display. We're 'Mozilla Firefox Start Page' and the other is the screen "on the first installation of Mozilla". Installing the first page is displayed on the screen. Both are active.

    I would like to see a single one. I don't know what to do.

    You can check for problems with preferences.

    Delete a possible user.js file and files numbered prefs-# .js and rename (or delete) the file prefs.js to reset all the prefs by default, including the prefs set via user.js and pref which is no longer supported in the current version of Firefox.

    You can use this button to go to the Firefox profile folder currently in use:

    • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • Export options for the screen display?

    I want to do a screening to export a lot of photos that will be visible on the phones, tablets, and TVs.

    1. is the best sRGB color for the on-screen display space?

    2. I'm culture images in 16 x 9. All the megapixels in these pictures are wasted for the display? I'll change the resolution to 72, well that what should I do with the megapixels?

    Thank you.

    It was not the case for a long time.

    A pixel is a pixel. 2000 pixels will be 2000 pixels to display. the question is that of the device. The native resolution of a in 20 Apple Cinema Display is 1680 x 1040 so a 2000 pixel wide image will be too large for the screen at 100%

    On the other hand, the iMac 5K has 5120 x 2880 the same 2000 pixel image would take less than half of the screen.

    The 'thumb' of 72 240 or 300 resolution concerns only thumbs on a sheet of paper, not a screen.

  • Do the current ('active') in the bar a different color navigation tab

    Hi-

    How to make the 'active' tab in the navigation bar displayed in a different color, so that the user knows which page is currently viewing the color of the tab from the navigation bar?

    I tried to assign a unique ID to each element of the navigation bar (tab), so they can be decorated.  Then, I made a CSS rule for each tp tab set the same color (green) to indicate that the tab is "active".  I ran a test using the 'HOME' tab, but my procedure did not work.  Any ideas as to what I can do?

    Here's what I have for HTML and CSS:

    HTML:

    < div class = "navMain" >

    < ul >

    < li = "Home" tab id > < a href = "index.html" > home < /a > < /li >

    < id li = "AboutTab" > < a href = "about.html" > on < /a > < /li >

    < id li = "PortfolioTab" > < a href = "portfolio.html" > portfolio < /a > < /li > ""

    < id li = "ResumeTab" > < a href = "resume.html" > curriculum vitae < /a > < /li > ""

    < id li = "ContactTab" > < a href = "Contact.php" > Contact < /a > < /li > ""

    < /ul >

    < / div > <! - END navMain - >

    CSS:

    {#HomeTab}

    do-family: "Arial Unicode MS";

    do-size: 18px;

    make-weight: normal;

    text-transform: uppercase;

    Color: #0F0;

    text-decoration: none;

    }

    I also provided my reference site:

    http://www.sbaisden.com/

    Persistent Page indicator

    http://ALT-Web.com/articles/persistent-page-indicator.shtml

    Nancy O.

  • There are all sorts of symbols in the upper part of the screen on different things. (Delete, answer, answer all etc)

    Thunderbird didn't work at all the other day and I had to keep going in the Task Manager to shut it down, but then he began to work the next day and it works. However, there are all these symbols covering in the upper part of the screen.

    It seems that you have a mixture of two different languages.

    Close Thunderbird.

    Back up your profile folder.

    Uninstall Thunderbird:
    Via 'Control Panel' or 'Settings' > 'programs and features '.
    Select Mozilla Thunderbird and click 'uninstall '.
    uninstall all instances of Mozilla Thunderbird.

    Download the language appropriate for your operating system from the link below and install it.

    Report on the results.

  • How to resize the screen display to use only half of the screen

    in order to write the information to a website in a MS word document, I want to put the site to display browser so the document MS word on the screen at the same time (each 1/2 of the screen (left and right view). How can I do this? I am technically challenged so tell me in the jargon of the primary school

    I can't test this on Windows 10, but...

    On Windows 7, if you hold down the keyboard Windows key, then press the right arrow key, the currently active window will change its form. By example, if the window is maximized it will change occupying half right side of the screen. Hold the Windows key and pressing the arrow key right to scroll to the right, left and restored/resizable. To maximize, use the up arrow key.

    I hope you can use this keyboard shortcut hidden to set each application to the half of the screen easily without having to manually extendable/retractable and move windows. And it's a cool thing that you can share with other people.

  • Why don't my PrintOut look like the screen display?

    This happens everytime I use Firefox.

    Whenever I try to print a list of Ebay, the main image is omitted from the print. Here is an example. This first link is to a (Fn and PrtSc) screenshot of a typical list on Ebay:

    http://s1176.Photobucket.com/albums/x327/xvqgp/Firefox

    Search for image FirefoxScreen.jpg PhotoBucket page

    There is an overview of the issue at the left side of the page.

    Now take a look at what I get when I use the command 'Print' to Firefox (it is a scan of the printed page):

    On the same page look PhotoBucket for FirefoxPrint.jpg

    There is a big empty space where the main image should be!

    I have not been idle and checked a few things before I ask this question:

    (1) I went to print as settings the useful Firefox article on printer troubleshoting points out. It has not cured the problem.

    (2) of the same article, I have tried the function 'Print' on Internet Explorer. Although it pains me to say, I have the correct impression of Internet Explorer.

    (3) to use Firefox in "Safe Mode" has not removed the problem.

    (4) operating in 'Normal' mode but with disabled modules did not remove the problem.

    (5) when I move the mouse over the main image on the Ebay page I

    JavaScript:;

    in the lower left corner of the screen. It is perhaps a clue, or is it a herring-saur?

    I would be very grateful for the help.

    Have you tried to use the print at the bottom if this eBay page?

    Or is that what you use?

    All in all, it is not unusual for "print" be a little different from what shows on the screen ' ", this page can use @media to"screen"and"print ". The print on this page could be the difference, or the web browser may be after that code is that you used the print button or the menu item in Firefox.

    http://www.w3.org/TR/CSS2/media.html#media-types

    As a general rule, the @print CSS is used to hide the menu navigation (can not 'navigate' to an another page on a sheet of paper) and maybe ads (can not 'click' on an advertisement which is made on paper) in being printed so that the article text is printed on paper.

    Basically, it is probably not a flaw with Firefox, but rather Firefox following the commands on the page placed there by the person who wrote this page, or a standard "CSS stylesheet" used by eBay.

  • Your screen increases beyond the xapacity of the screen display. I want to uninstall firefox completely.

    Only on firefox in my yahoo account, the magnification exceeds the display screen. It is a nuisance. I want to read the screen in a blow without had to keep scrolling to the right. How can I reduce the magnification on firefox. This does not happen on the internet explore only firefox.

    Return the level of zoom on this page.

    See this:
    https://support.Mozilla.com/en-us/KB/page+zoom

  • Draw the dots of different colors and sizes

    Hello

    Is it possible to draw several dots of different colors and sizes?  Small size would be green, medium-sized yellow and big sizes Red?  I tried to use XY and field Multi-XY, but I'm not having much luck.  Looks like there may be a way to do it with ground Multi-XY if I use Plot XY cosmetics and size Scatter Plot cosmetic, but I can't find anything on the functioning of these two options and it did not have a lot of sense to me when I am just playing with it.

    Thank you!

    Gerd has the right idea.

    Say you have 3 ranges: < a,="" a-b,=""> B

    You check each data point as it came, to see who will he fell in.

    Build 3 separate tables and cluster each a vs a table 1 d of the corresponding X values.

    Then if you pass these 3 groups to a XY Chart, you get a graph showing the colors and different styles for each range.

Maybe you are looking for