Toolbar is text double Screwy ++ more with the last update of el capitan

Similar Questions

• Mac freezes or crashes with the last update of El Capitan

  I have an old iMac (mid 2007), Mac, but I have never had any problems with it until this last update of OS lock (Version OS X El Capitan 10.11.4, although I have returned to an earlier version recently to prevent locking without result).  I have 4 GB memory 667 MHz DDR2 SDRAM, 2.4 GHz Intel Core 2 Duo CPU graphics ATI Radeon HD 2600 Pro 256 MB.  Usually, I use Safari when this happens. It requires a restart of the hard to get it working again. I also have the Machine backup time, which I returned to an earlier version of the operating system at some point.  In general, the cursor still moves, but does not work no matter what windows or controls, that is why it requires the hard reboot.  The Mac reputation is on the line, since I told my friends of Windows that Mac will last at least a decade before they may need to be replaced, while Windows based computers need replacing every 5 years.  Is that what I can do perfectly well apart from the replacement of this computer?

  1. the present proceedings is a diagnostic test. It doesn't change anything for the better or worse and therefore, by itself, will not solve the problem. But with the help of the results of the tests, the solution may take a few minutes, instead of hours or days.

  The test works on OS X 10.8 ("Mountain Lion") and later versions. I do not recommend running it on older versions of Mac OS X. It will do no harm, but it will not do not much good.

  Do not be put off by the complexity of these instructions. The process is much less complicated than the description. You make the tasks more complicated with the computer all the time.

  2. If you do not already have a current backup, please back up all the data before doing anything else. The backup is needed on the general principle, not because of what anyone in the test procedure. Backup is always a must, and when you encounter any kind of problems with the computer, you can be more than the usual loss of data, if you follow these instructions or risk not.

  There are ways to back up a computer that is not fully functional. Ask if you need advice.

  3 here is instructions to run a UNIX shell script, a type of program. As I wrote above, it doesn't change anything. It does not send or receive data over the network. There is no to generate a report on the State of the computer human readable. This report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents for me or someone else.

  You should ask yourself if you can believe me, and if it is safe to run a program at the request of a foreign national. In general, no, he's not sure, and I encourage it.

  In this case, however, there are ways for you to decide if the program is safe without having to trust me. First of all, you can read it. Unlike an application that download you and click to start, it is transparent, anyone familiar with the code can check what it does.

  You may not be able to understand the script yourself. But variations of it have been posted on this site several times over a period of years. One of the million registered users to have read the script and set off the alarm if it was dangerous. Then I wouldn't be here now, and you would not be reading this message. See, e.g., this discussion.

  However, if you cannot satisfy yourself that these instructions are safe, do not follow them. Ask other solutions.

  4. here is a general summary of what you need to do, if you decide to go forward:

  ☞ Copy text from a particular web page (not this one) to the Clipboard.

  ☞ Paste into the window to another application.

  ☞ Wait for the test to run. It usually takes a few minutes.

  ☞ Stick the results, which will be copied automatically, in a response on this page.

  These are not specific instructions; just a glimpse. The details are in parts 7 and 8 of this comment. The sequence is: copy, paste, wait and paste it again. You don't need to copy a second time.

  5. try to test in conditions that replicate the problem, to the extent possible. For example, if the computer is slow intermittently, run the test during a downturn.

  You may have started up in safe mode. If the system is now in safe mode and works pretty well in normal mode to test run, restart as usual before running it. If you can test only in safe mode, this.

  6. If you have more than one user and a user is affected by the problem, and the user is not an administrator, and then run the test twice: once under the affected user and one administrator. The results can be different. The user that is created automatically on a new computer, when you start it for the first time is an administrator. If you are unable to log in as an administrator, verify that the user concerned. More personal Mac have only one user, and in this case this section does not apply. Don't log in as root.

  7 load the linked web page (the site "Pastebin.") Press the combination of keys command + A to select all the text, then copy it to the Clipboard by pressing command-C.

  8. start the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name ("Terminal") in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Click anywhere in the Terminal window to activate it. Paste from the Clipboard into the window by pressing Command + V, then press return. The text that you pasted should disappear immediately.

  9. If you logged in as an administrator, you will be prompted for your login password. Nothing displayed when you type. You won't see the usual points instead of the characters typed. Make sure that caps lock is turned off. Type carefully, and then press return. You can get a warning to be careful. If you make three unsuccessful attempts to enter the password, the test is still running, but it will produce less information. If you do not know the password, or if you prefer not to enter, just press back three times at the password prompt. Yet once again, the script will run.

  If the test takes much longer that usual to run because the computer is very slow, you can be prompted for your password a second time. The permission you grant by entering it will expire automatically after five minutes.

  If you are not logged as an administrator, you will be prompted for a password. The test will run. It just will not do anything that requires administrator privileges.

  10. the test may take a few minutes to run, depending on the number of files you have and the speed of the computer. A computer that is abnormally slow may take more time to run the test. During execution, a series of lines is displayed in the Terminal window like this:

      Test started

          Part 1 of 4 done at: … sec        …        Part 4 of 4 done at: … sec

      The test results are on the Clipboard.

      Please close this window.

  The intervals between the parties will not be exactly the same, but they give an approximate indication of progress.

  Wait for the final message "Please close this window" appear - again, usually within a few minutes. If you don't see this message in about 30 minutes, the test probably won't be completed within a reasonable time. In this case, press the Ctrl + C key combination or the point command to stop it. Then go to the next step. You will have incomplete results, but still something.

  In order to get results, the test should be allowed to perform or be stopped manually as shown above. If you close the window of the Terminal, while the test is still running, the partial results will not be saved.

  11. when the test is completed, or if you manually stopped, leaving the Terminal. The results have been saved to the Clipboard automatically. They do not appear in the Terminal window. Please do not copy from there. All you have to do is start a response to this comment and then paste it again by pressing Command-V.

  At the top of the results, there will be a line that begins with the words «Start time.» If you do not see that, but rather to see a mass of gibberish, you wait for the message "close this window". Please wait and try again.

  If personal information, such as your name or e-mail address, appear in the results, make anonymous before posting. Usually it will be not necessary.

  12. in the validation of the results, you see an error message on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the software which manages this website. Thanks for posting the results of the tests on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

  13. When you are finished with the test, it is gone. There is nothing to uninstall or clean.

  14. This is a public forum and others can give you advice based on the results of the test. They speak for themselves, not for me. The test itself is harmless, but all that you can not be. For others who choose to run it, I do not recommend that you view the results of test on this Web site unless I ask.

  15. the related UNIX shell script is a notice of copyright. ASC readers can copy for their personal use. The whole nor any part can be redistributed.

• My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  Any suggestions?

  My iPhone with iOS 9.2.1 5s is deleting random contacts.  This happened for several months is not just with the last update of iOS.  It deletes recently used contacts and removes also from my iPad.  Any suggestions?

  That you synchronize your contacts with? A decision-making application supported on the computer, a Cloud Computing service?

• MY FONT SIZE HAS CHANGED WITH THE LAST UPDATE AND I CAN'T SEEM TO RETURN TO NORMAL.

  WITH THE LAST UPDATE OF THE FONT SIZE CHANGED ON MY EMAIL ACCOUNTS AND PAGES OF MY WORK.  IT OF SMALL, I CAN'T READ IT EVEN WITH GLASSES ON. IT IS MAGNIFIED 150 TIMES.  MY COMPANY, HE CHANGED THE RESOLUTION WHICH HAS CHANGED MY SIZES OF ICONS, BUT DOESN'T HAVE ANYTHING DONE TO MY FONT SIZES.  THE HAD ME ALSO DO SOMETHING WITH MICROSOFT THAT DOESN'T WORK ANYMORE.  SO THEY HAD ME CONTACT MICROSOFT WHO CAN HELP ME BECAUSE I CAN'T AFFORD TO PAY TO GET ANSWERS TO MY QUESTIONS.  I AM ALREADY 3 HOURS LATE FOR WORK IN TRYING TO SOLVE THIS PROBLEM.  CAN SOMEONE OUT THERE HELP ME?

  Hi ELLA SMITH (KELLY).

   

  Welcome to the Microsoft community forums. Please post your query and giving me the opportunity to help you.

  I'm sorry for the inconvenience caused.

  I will guide you on the issue of the police.

  (1) you are on a domain network?

  (2) the Windows updates were installed?

  (3) what happens when you try to change the font sizes, you get an error message?

  I suggest you refer to the link to verify that Windows update have been installed.

  http://Windows.Microsoft.com/en-us/Windows-Vista/see-which-Windows-updates-are-installed

  Method 1:

  You can check follow them the links below, if that helps:

  (1) change the Windows fonts
  

  http://windowshelp.Microsoft.com/Windows/en-in/help/bdc9d003-777b-4B1E-9664-2957f50870bd1033.mspx

  (2) fonts: frequently asked questions
  
  http://windowshelp.Microsoft.com/Windows/en-in/help/0caf0419-6990-45de-8D71-67f14a3ae4c71033.mspx

  (3) how to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  
  http://support.Microsoft.com/default.aspx/KB/936212

  Method2:

  un) make system restore, choose the date where the screen resolution and the fonts were ok as your restore point.

  (b) when these updates come to install again, do only ONE AT A TIME. After each installation, check if the screen is ok, and then next update and so on.

  c) in this way, you'll be able to simply update is the cause of this problem.

  If the problem persists feel free to post us. We're here to help.

  Thank you.

• Problems of displacement of clips on the timeline with the last update

  I have problems of movement of clips on the timeline with the last update

  and the selection of the clips on the original tab

  MacBook pro 15 "retina

  work

  I use a secondary monitor

  If I chronology in the second book of doesn´t monitor, but in the first monitro works very well.

  Maybe a bug

• Drag and drop from Illustrator to Photoshop not working only not with the last update... Any ideas that can do about it?

  For example, I have a file of newspaper advertising open (as in Illustrator) .ai and I want to use the logo from here and place it in a .psd file (banner that I do in Photoshop). Before that I selected just Illustrator logo/layer and drag droped to Photoshop. This logo would be recognized as a smart object in Photoshop. Now, this is not possible. I'm working on Windows 10 x 64 and this problem occurred with the last update of Photoshop.

  Hi kristijan_st,

  Please see the article below relates to the last update for Photoshop.

  This article is not directly editable in Photoshop...

  Let us know if that helps.

  Kind regards

  ~ Mohit

• With the last update, I am unable to merge cells in a table and Ive tried Split and Live view.

  With the last update, I am unable to merge cells in a table and Ive tried Split and viewing live, all the tutorial and manuals say to do in Design view, which is no longer available.  How to merge cells in a table now?

  To get the fashion Design back in a checkerboard to fluid...

  Close all other files, open the fluid grid css and add the X below:

  /*

  Properties Grid Dreamweaver fluid

  ----------------------------------

  DW-num-CLO-mobile: X 4;

  DW-num-CLO-Tablet: 8;

  DW-num-OCOL-Office: 12;

  DW-gutter-percentage: 25;

  =====================================

  Then save and close the file.

  DW restart and you should have mode Design from here out on all files using this fluid grid .css file.

• Photoshop no longer works with the last update

  It is constantly freezing and I can't get any work done at all. Does anyone else have this problem? It began with the last update CC. I hate that we are paying for a product that is not 24/7 support.

  Hi Ktgilead,

  Allows you to restore Preferences quickly by using a keyboard shortcut: press and hold Alt + Ctrl + Shift (Windows) or Option + command + shift (Mac OS) when you start Photoshop. You are prompted to Remove thesettings. New Preferences files are created the next time you start Photoshop.

  * Please take a return for all stocks custom or preset that you have in Photoshop, they may be lost

  If it does not can provide us with information, it's that a computer mac or windows that you use.

  Copy and paste the system information that can be found under help > information system (in Photoshop menu bar)

  Thank you

• Lost all my tabs open with the last update

  I've updated Firefox with your last update of security and since then Firefox would freeze with a script error when I tried to go to one of my tabs. I followed the troubleshooting instructions and he created a "Old Data" folder in my office, but the new page of Firefox did not my tabs. How can I get back them? Can I cancel the update and return to the previous state of Firefox before the update?

  (edited to replace labels with tabs - c)

  Thank you all for trying to help. Here's what needs to be done to solve the problem when Firefox is installed on a mac. When you tried to reset your profile, note that there is a folder created in your desktop called 'Old Foxfire Data' or similar to this one. It contains all the data that has been cleaned up in the new profile. Delete the Firefox application and download a new application of Foxfire. Then launch Firefox. When open go in the tab 'Help', above. It's the last of them. Once you click on help, then click on "troubleshooting information. The first section is called "Basic application". In this section, click on the tab "show in Finder". It will display your profile folder. It starts with a letter and then a bunch of numbers and letters. But it will contain '.default' and some other figures. Now go to the first folder in your office called old data Foxfire and open it. Note that it will also have a similar profile folder. Open it and go to this folder copy all 80 more files. Now go to the new profile folder, open it and paste all files in this folder from backup profile to the profile folder. Click Yes to replace all the files that you paste into the new profile folder. That's all. Close, close and restart Firefox. You will have all your history, bookmarks and any label that you had open before the crash. Also, I say stop mac and restarted the computer, so that all possible conflicts would be eliminated. PS: The deletion of your profile folder and paste the old folder in its place it will not work! You need to replace all of the files in the new folder with the files from your profile in the old data folder.

• How to display the content of the message in the preview pane? He went with the last update.

  Before the last updating Thunderbird. I was able to see the content of the message in its entirety in the preview or show the pane at the bottom of the page. Now, I have to select an option to display the classic view tab. How to return to the original display option?

  Try restarting with disabled addons. I think remember me someone having an old adds on the cause.

  You can do this in the Help Menu.

• With the last update auto-fill in frequently used email addresses were significantly slower to the point is now a nuisance.

  When you send e-mail to the same people over and over Thunderbird starts automatically what you guess after just a few keystrokes.

  For example, if I type js it will before semi-automatic [email protected] and I won't have to type something more.
  In the last update, the performance has regressed to what was instant now a few tenths of a second and is a big nuisance.
  Now I type in js and click on enter I just get js. If I type js and then pause for a moment and then fills semi-automatic.

  Can you if you please correct it.

  I don't think you should have concerns about installing MoreFunctionsForAddressBookbecause it's an add-on well known and widely used.

  It is unlikely that Mozilla will cancel the changes, but it may be months or years before they solve the problem. If the combination of the add-on and the CT 31 does not for you, it is always possible to reinstall the previous version:

  http://FTP.Mozilla.org/pub/mozilla.org/Thunderbird/releases/24.8.0/Win32/

• FF is slower with the last update.

  FF is worse with the last 13.0.1 update. He uses too much RAM, scrolling of the page is a lot slower and YouTube vids stall all playing. What is a paradox?

  First of all, try resetting Firefox. Refresh Firefox – reset settings and Add-ons. This simple step will eliminate the many problems in Firefox with just one click.

• If I download the update for firefox I have problems with my real player as with the last update?

  The last update for firefox I was warned that if I downloaded it that my realplayer wouldn't work. I don't want to download the update to firefox 6, if I'm having a problem with realplayer

  Using the RealPlayer Plugin with Firefox

  • https://support.Mozilla.com/en-us/KB/using%20The%20RealPlayer%20plugin%20with%20firefox
  • http://KB.mozillazine.org/RealPlayer

  Check and tell if its working.

• Problems using effects of roll with the last update.

  I'm new on using effects of roll and just got the hang of it when Adobe released the last update. Now, I get the message "To enable scrolling of the effects, your page must use a unique fixed stopping point" I use a single fixed stopping point and still get this message. I want to make a single page Web site scroll with multiple layers moving on the other, but with this last update I can not get my scrolling effects to accept any acceptable layout to activate the effect.  Can someone tell me what I am doing wrong?

  Help, please!

  Hello

  Please refer to my suggestions in the link below.

  How to activate the scrolling of the effects

  Kind regards

  Vivek

• Fonts and icons in Photoshop still too weak in IPR systems high even with the last update!

  Come on Adobe! Autodesk, Google, Piriform, Microsoft, Corel Draw and many others have already set the question put on the scale in high resolution systems.

  Fonts and icons in the entire UI in Photoshop CC are still tiny after the last update, with the exception of drop-down menus. And the 200% scale in the experimental features that makes them too big. When are you going to fix this?

  Someone else knows how to fix this? I noticed there is a setting in preferences-> interface, there is an option to change the user interface fonts, it goes from small to big, but he does nothing...

  If you want to give your Adobe comments please use Adobe Feedback does site not this Photoshop family customer community forum