Touchpad keeps disabled at startup of windows on satellite

Similar Questions

• Is it safe to disable the startup of Windows Defender and its services

  I use Microsoft Security Essentials on my machine.

  In the analysis of programs that I can disable to start at the beginning - until by msconfig.exe, I found Windows Defender that can be turned off, since I'm using MSE.

  Is it safe to do?

  When you install MSE, it will automatically disable Windows Defender and event he could come at the start, it does not cause performance problem. Start by opening Windows Defender and if it shows that it is disable, then you don't need to do anything. However, if it was open, then go to settings and turn it off.

  It is better that do not disable startup for Windows Defender, in case you want to uninstall MSE for a reason, you have a protection against spyware and Windows Defender can switch on. But there is no hight impact the performance on your system.

• disable disk automatic check at startup in Windows Vista

  How can I disable disk automatic check at startup of windows vista?

  Hi HowardGarlinger,

  Thanks for posting in the Microsoft Community.

  He would be grateful if you can answer these questions to help you further.

  1. you have to make the full scan?

  2 did you a recent software or hardware changes to the system?

  3. are you able to start the fine of office?

  Let us try the following steps to disable automatic checking.

  Method 1:

  You can try the steps to disable the autochecking.

  a. Click Start, and then type regedit in the box start the search.

  b. right-click regedit.exe , and then click "run as administrator".

  c. develop the '+' for the following keys.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Session Manager

  d. There is a value called here BootExecute. If bmssldr is listed in the data section and then remove it.

  Otherwise follow these steps, the default value of the key is autocheck autochk *, * means every drive is checked for consistency.

  e. just add /K:C at the end before *. /K switch will disable autocheck on C: drive at Windows startup. If the final value should look like this:

  autocheck autochk / k: C

  > If you want to add more drives, the key should look like this: (by disabling the drives C and D)

  / k: D / k: C autocheck autochk *.

  > If you want to restore all default, just replace the key with the default i.e.

  autocheck autochk *.

  Important:  The above mentioned steps show you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs.

  For more information, see the article:

  Back up the registry

  Method 2:

  If the problem persists, try running a disk of Windows receovery environment check.

  Try running the disk drive check WinRE using the full version of Windows Vista disk and check if it helps.

  a. Insert the installation disc.

  b. restart your computer.

  c. When you are prompted, press any key to start Windows from the installation disc.

  Note: If your computer is not configured to start from a CD or a DVD, see the documentation provided with your computer. You may need to change your computer's BIOS settings. For more information, see BIOS: frequently asked questions.

  d. Choose your language settingsand then click Next.

  e. in the System Recovery Options menu, click command prompt

  f. at the command prompt, type the following command and press ENTER.

  chkdsk /f /r X: (drive letter)

  Note: when you run the disk check, there is a risk of data loss you can take a backup before starting the checkdisk.

  g. press y when you are prompted to check the drive the next time the system restarts.

  If you need further assistance, please answer and we will be happy to help you.

• the touchpad on my toshiba laptop with windows vista is disable and I don't know who to make it work again

  the touchpad on my toshiba laptop with windows vista is disable, and I don't know who to make it work again.

  Hello

  Toshiba has also map of keys which allow easy adjustment of the TouchPad. See support for Toshiba
  and Forums. The key shortcut for the TouchPad, if they are responsible in the Fn + F9 or see the key card
  So usually loaded at the top of the screen.

  There is also usually a TouchPad control utility that loads in the Notification area next to the clock
  at the bottom right.

  Toshiba support - click Communcate for links to the Forums and Contact Toshiba.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp

  Toshiba downloads - access your model.
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

  Toshiba forums - good source of info from others who have the same system or similar
  http://laptopforums.Toshiba.com/

  Check with the manufacturer of system support, documentation in line, or forums as there probably
  are shortcut keys that enable and disable the touchpad functions.

  Also check the control - Mouse - touchpad settings panel.

  You can also try this:

  Panel of configuration manager devices - mouse and pointing devices - Double click on the touch pad-
  The driver tab - click on Update Driver (which is may not make anything like MS is far behind certifying)
  (drivers), now right CLICK on the touchpad and UNINSTALL.

  Then go to the USB and UNINSTALL ALL controllers except the category itself (all in).
  RESET

  This will refresh the driver for the TouchPad and battery USB. This does not prevent the touchpad
  of work.

  Here is the similar procedure in XP, Vista is the same, except that we need to clear the specific
  device if present.
  http://support.Microsoft.com/kb/310575

  Then go to the website of the manufacturer of system (Toshiba downloads - access your model - listed above)
  and get the latest touchpad drivers.

  Download - SAVE - go to where you put it-click on - RUN AS ADMIN.

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Windows Vista 64-bit with readers that will not start after disabling all startup applications and registry changes

  My Vista 64-bit system ran like a dream - until I tried to install Roxio Creator 2010.  When the installation failed and hung up, I stopped the installation with the Task Manager and rebooted the pc.  Following the instructions of blog users of Roxio, I did the following:

  1. selected disable all startup using MSCONFIG and restarted the pc applications.

  2 download and run the Microsoft Windows Installer CleanUp.

  3 remove the partially installed Roxio files in the directory c:\Program Files x 86, then made an export of registry before editing the registry.

  4. under the leadership of the registry - deleted file folder HKEY_CURRENT_USER Software Roxio and has attempted to delete the Wow6432Node folder from the HKEY_LOCAL_MACHINE folder but encountered an error - didn't note it, unfortunately, but basically he said that he could not remove it when it has been changed, after waiting a while I tried to delete the folder Wow6432Node whe even once with the same answer, so I closed Regedit and restarted the pc.

  The pc goes through the process of startup and hangs when it tries to start Windows Vista.

  5. I can't do a repair with the Vista disk - files are not present.

  Hello Ajay K.

  Thank you very much for your detailed answer.

  I got no error message.  I backed up the registry, but was not able to start the pc, so was not able to restore the registry.

  I couldn't restore last good configuration known - the option was not yet present.

  When I tried to restore the operating system, he asked drivers before it would proceed.

  I have a floppy 1.44 with the raid drivers and after reloading of these drivers, I was able to reload Vista Ultimate.  Fortunately, all my data was recorded in a windows.old directory, and I'm back in business without losses.  Just had to reload all my software.  Do that...

  I think that my problem was caused by disabling all startup applications in msconfig - which resulted in my hard not recognized disk array.  This seems likely.

  You are awesome to provide an exceptional response.

• 13 satellite L50D-B-q: Touchpad keeps freezing

  I bought the laptop above for my wife a little more than a month, and after a few days the touchpad keeps freezing. Sometimes it works, sometimes it doesn't. (currently using an external mouse via USB).

  I tried f5 and f9, but they do not seem to make a big difference. I also downloaded a driver recommended on another forum somewhere, and that seems to work for a week or two. Now, we're back to square one.

  This cannot be good for a new laptop. I have not upgraded to Windows 10 and we do not anticipate doing soon.

  Any help appreciated. The Toshiba page had a guide on turning off, take the battery out and do something with the BIOS, but I don't see how I can take out the battery unscrewing bitless and I don't want to do that.

  Any help is greatly appreciated.

  Thank you
  G

  I have the same problem with the touchpath. Luckely I still have an old mouse, so I am able to restart the computer.

• What should I change to keep alive indefinitely without any Windows activity?

  Title of the Moose: kb2492386

  Installed kb2492386 update to XP Pro (version 2002) as well as several IE8, several .NET framework and central management framework.  Since the updates windows times out and require a re-login.  Power options are unchanged: never stop disks, never attend the eve and disabled hibernation.

  What should I change to keep alive indefinitely without any Windows activity?

  Hello

  Follow these steps and check if that helps:

  a. log on to a user administrator account in Windows XP.

  b. click the rectangular 'Start' button in the left corner and open the control panel.

  c. click on "Performance and Maintenance" and select "Power Options".

  d. choose 'Never' lists 'sleep' and 'Putting into hibernation'. Then click on 'OK '.

  Also, see this Microsoft KB article and check if that helps:

  How to solve the problems of hibernation and standby in Windows XP

  http://support.Microsoft.com/kb/907477

• SSD for the boot, SSD, reformatting of the files needed for a normal startup of Windows 7

  I just have to use the SSD Sandisk more for the startup of Windows 7 and MSOffice programs.
  I made a mistake of a new copy on Windows 7 top loading.
  What I wanted, it was just part of Windows 7 with all current configurations and keep the data on the other hard drive.

  So what I did is to clone the old HD (which was almost full) to a larger HD, so I have a full copy, which is bootable.
  I took the old HD and removed/uninstalled all data & programs except: all files in Windows, the files MS Ofc, video card, keyboard & mouse records, Internet browsers, contact lists, etc.

  My plans were to take stripped this old HD, after defragmentation and clone through for the Sandisk SSD, so it will start quickly.

  My first concern is to clean the SSD drive that has the Windows 7 barebones.
  Can I just reformat?

  Any other considerations that I missed?

  You can re - format the disk and run clone on it, if you don't want to keep of course.

  The situation you describe seems feasible for me

• SP1 update has disabled the startup. Please help (error 0x8007000E)

  original title: SP1 update has disabled the startup. Help, please

  I ran the upgrade of windows (84 files) and restarted the pc, checking upgrade again and he said updated service pack 1 or SP1 so I start making level and after a long time its still shows the installation but the icon in the lower right shows 100% so I clicked on cancel and then restarted the pc.

  Now Im getting a Startup Repair error box that search startup errors but says "Windows cannot repair this computer automatically. I can click on 'Finish' or 'Cancel' if I click on end it shuts down the pc if I click cancel it reboots the pc. another box pops up that says "Startup Repair cannot repair this computer automatically.
  My options are 'Send info on this problem (recommended)' or 'do not send' if I click it scans a second and then the box goes away leaving the 1st box of error described above.

  I tried to hit F8 and using 'repair your computer' this is for me the box of system recovery options. Sign in with my user name and password to choose a recovery tool.

  • Startup Repair
  • system restore
  • restore complete Windows pc
  • Windows memory diagnostic tool
  • command prompt
  • Recovery Manager

  I tried startup repair, but get the same message as above.
  I tried the system restore (which does not affect any of my files, documents, etc..) Then he said: choose a restore point that I want to use, but the only option is the 31/05/2011 install Windows Vista Service Pack 1... then I go ahead and try it and it says it will restart my pc and apply the changes. It initializes, file restore, then a box pop up saying system restore has failed. has failed because of an unspecified error. Not enough memory is available to complete this operation. (0x8007000E)

  So I try here this forum...
  Question: Lets say there's someone who can get my pc back to normal... what I need updated SP1 and SP2?

  Hello

  Not having the system restore, you can try a different restore point and check. If the problem persists, then you must try a startup repair and system restore boot from the disk Installation of Windows Vista.

  You can try to disconnect all the external devices (except keyboard and mouse) and tries to boot from the disk and check.

  For more information, consult the following link:

  What are the system recovery options in Windows Vista?

  You can also check out the following link and check error 0x8007000E

  Common causes and solutions to the problems of backup, System Restore and computer backup

  Hope this information is useful.

• How are we going to stop 'Computer' or 'Libraries' or the 'My documents' folder opens at startup in Windows 7

  Hello everyone and Microsoft workers.

  I'm having a problem where the "computer" folder opens on itself at the start of Windows 7. I did the research for days and no luck. It seems that most of the workers from microsoft does not include our question and problem.

  When booting Windows 7 "Workstation" or "libraries" or "My Documents" folder opens at startup. " How do fix us this? Anyone have the solution?

  Well good for me first 'libraries', so now it's the "computer" folder Every time when my starting the computer to shutdown or restart, popups of computer file at startup.

  It only popup once when turn on or restart the computer, it will pop up when the window loads in.

  NOTE: 1 update Microsoft Security Essential 13/02/2012 complete scanned with no internet. computer clean result that found nothing.

  "2"msconfig"- isn't the problem, it does not display"my computer ' or 'library' or 'my document'.

  3. regedit - is normal, there is no dub or any other person.

  4 start / all programs/startup folder is empty, so that not reslove the problem.

  5. all the above solution 1-4 of the method are not good for my problem. everything is normal except that popup folder machine to start lol.

  6 no solution.

  Please do not click or put answered when it is not really answered. If one of the solutions that could solve part of your problem, then please leave a response full info details why & what & how and what solution has helped you. To ensure that microsoft workers, people and I don't get confused. and the post age thinking it is already solved the problem like many others. Thanks :)

  =====================================

  last update 24/02/2012

  When I plug in my new Logitech webcam a message popup and ask me to sign up. I never clicked register and this fixed the really weird problem but is it solved the problem.

  If someone has the same problem try 'Adi B', "try * 3", "Ronnie Vernon", method "Bradley Thomas. (Thank you all)

  If continue it problem remove or disable any startup like Logitech, Seagate, microsoft or other product which requires you to register. Hope this will help someone that you have this problem.

  No, in Safe Mode nothing opens. It is normal mode without failure. And no I haven't run any AV software, beside you cannot have only one AV software installed.

  But I figure out I fixed the problem thank you very much for trying to help me.

• How can I disable AutoScroll frustrating in Windows 7?

  How can I disable AutoScroll frustrating in Windows 7?  Whenever I try to type, or even move the pointer - the scroll bar active!

  From this study, it seems that the touchpad is extremely sensitive.

  Laptops also used to have built in the scroll bars on the bottom and the right side of the touchpads.  I have not seen one in a while and don't know if they start this new practice.

  If you are talking about just the cursor (arrow) on the screen by moving when you press the mouse button (which is integrated in the touchpad) the only real solution is component to the bottom of the sensitivity of the touchpad via Control Panel and learn to control the touchpad without accidental clicks.  I have a wireless entertainment 7000 microsoft keyboard that has sensitive functions of touch as a touchpad, and it may have a bit of a learning curve if you're used to buttons.  Not be your fingers anywhere which is touch sensitive with release of trigger.

  I suggest to get a USB mouse in option (they can be picked up cheap at any retailer important) because they offer better control everything by being better for you ergonomic that are the standard touchpads.

• I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine

  I got to level only the hard drive in my computer and now I keep getting messages that my Windows 7 is not genuine
  and my windows update software no longer works. When I check the status of my activation of Windows 7 in the computer
  Properties, it is reported that Windows IS enabled. When I run the Windows activation repair tool it will fail
  and I get the following error messages: 0x80004fe21 and 0xC8000247. I also tried the Windows FixIt tools for
  activation and Windows Update without success.
  Please email me or call me with suggestions or PH 513-289-4785 thanks

  Tool Windows MGA results

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0x8004FE21
  Code of Validation caching online: 0x0
  Windows product key: *-* - B72VQ - G6RKT-G7B6M
  Windows product key hash: ISzyTLRWNXmB8 + BGCAyBkfJVOE0 =
  Windows product ID: 00359-OEM-9804563-10468
  Windows product ID type: 8
  Windows license type: COA SLP
  The Windows OS version: 6.1.7600.2.00010300.0.0.003
  ID: {47CDEE04-15E7-4393-823C-9F19163CCB88} (3)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7600.win7_gdr.110408 - 1633
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 100 authentic
  Microsoft Office Enterprise 2007 - 100 authentic
  2007 Microsoft Office system - 100 authentic
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 77F760FE-153-80070002_7E90FEE8-175-80070002_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3_B4D0AA8B-920-80070057

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->
  [File mismatch: C:\Windows\system32\wat\watadminsvc.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\wat\watux.exe[7.1.7600.16395], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppobjs.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppwinob.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slc.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\slcext.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppuinotify.dll[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\slui.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\sppcomapi.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppcommdlg.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\sppsvc.exe[6.1.7600.16385], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spsys.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\drivers\spldr.sys[6.1.7127.0], Hr = 0 x 80092003
  [File mismatch: C:\Windows\system32\systemcpl.dll[6.1.7600.16385], Hr = 0x800b0100
  [File mismatch: C:\Windows\system32\user32.dll[6.1.7600.16385], Hr = 0x800b0100

  Other data-->
  Office details: {47CDEE04-15E7-4393-823C-9F19163CCB88}1.9.0027.06.1.7600.2.00010300.0.0.003x 64*-*-*-*-G7B6M00359-OEM-9804563-104688S-1-5-21-4105253140-3248553093-608739849ASUSTeK Computer Inc.        UL80VT American Megatrends Inc.. 214 20110117000000.000000 + 00061B83607018400F804090409Eastern Standard Time(GMT-05:00)03_ASUS_portable100100Microsoft Office Enterprise 2007129AF2C442EAD0F143bTpphlGMO63Fl + N/RWz9H3zae4 =81599-906-1700076-651751100Microsoft Office system 20071219

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7600.16385

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_COA_SLP
  Activation ID: 5e017a8a-f3f9-4167-b1bd-ba3e236a4d8f
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00196-045-610468-02-1033-7600.0000-3172012
  Installation ID: 104731195014616722429474505736359264920732256592507294
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: G7B6M
  License status: licensed
  Remaining Windows rearm count: 2
  Trust time: 28/11/2012-09:54:21

  Windows Activation Technologies-->
  HrOffline: 0x8004FE21
  HrOnline: n/a
  Beyond: 0x000000000001EFF0
  Event timestamp: 11:22:2012 12:30
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:
  Altered the file: %systemroot%\system32\sppobjs.dll
  Altered the file: %systemroot%\system32\sppc.dll|sppc.dll.mui
  Altered the file: %systemroot%\system32\sppcext.dll|sppcext.dll.mui
  Altered the file: %systemroot%\system32\sppwinob.dll
  Altered the file: %systemroot%\system32\slc.dll|slc.dll.mui
  Altered the file: %systemroot%\system32\slcext.dll|slcext.dll.mui
  Altered the file: %systemroot%\system32\sppuinotify.dll|sppuinotify.dll.mui
  Tampered files: Check %systemroot%\system32\slui.exe|slui.exe.mui|COM
  Altered the file: %systemroot%\system32\sppcomapi.dll|sppcomapi.dll.mui
  Altered the file: %systemroot%\system32\sppcommdlg.dll|sppcommdlg.dll.mui
  Altered the file: %systemroot%\system32\sppsvc.exe|sppsvc.exe.mui
  Altered the file: %systemroot%\system32\drivers\spsys.sys

  --> HWID data
  Current HWID of Hash: LgAAAAEAAQABAAEAAAABAAAAAwABAAEA6GFyGfz73n8sErBkTCA4/HhDcKpGyg ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0 x 20001
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC1150 011711 APIC
  FACP 011711 FACP1150
  DBGP 011711 DBGP1150
  HPET 011711 OEMHPET
  START 011711 BOOT1150
  MCFG 011711 OEMMCFG
  SLIC _ASUS_ Notebook
  CO-SUBMISSION 011711 OEMECDT
  LASRYVITRAGE 011711 OEMB1150
  GSCI 011711 GMCHSCI
  SSDT PmRef CpuPm

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• Tools-options-customize-disable 3rd party cookies window is great and save buttons at the bottom of the screen don't show up so I can't change anything or scroll or mak

  Tools-options-customize-disable 3rd party cookies window is great and save buttons at the bottom of the screen don't show up so I can't change anything or scroll, minimize the window somehow

  Hello, please try to start firefox in safe mode - interferes probably an extension or theme...
  Troubleshoot extensions, themes, and issues of hardware acceleration to resolve common problems of Firefox

• How can I disable the firewall of windows for FPGA

  I tried to compile an FPGA vi. Towards the end of compilation, asked me if I wanted to disable something in the windows firewall (probably to allow for communication between my computer and my PXI-7854R). At the time, I had no administrative privilege and couldn't do anything but cancel this request. Of course, nothing that I compiles now runs. How to get back to the point where I can disable the firewall?

  A picture of the error message is attached.

  

  Thank you

  Stephen

  Hello Stephen,

  Thank you for posting what solved your problem - it helps other users who stumble on this troubleshooting page.  So that they can see what position fixed, could you please go ahead and mark the message as a "solution" and give good Bravo?

  Thank you!!

• How to disable the MATLAB command window when the Matlab Script

  Hi, is it possible to disable the MATLAB command window popup when the Matlab script? Thank you.

  Isn't fear. As soon as you close the window is closed by the ActiveX Server and your script will stop running. You can, of course, reduce by using the operating system. Under Windows, you can use the Utilities of Windows API, as provided for in one of the threads of research responses.