Trace the requirement chart different 4 d!

Similar Questions

• How to trace the greatness of the variables compared to the timestamp with evenly spaced samples in time?

  Hello world. I need to trace the variable amplitudes compared to the timestamp (date and time), but the time intervals between samples are not equidistant. In my area, this is called trend plot. I'm surprised that Labview does not a vi to do this. The only solution that I found so far is to save the data in an Excel file and open this chart in Excel because it has the ability to trace what that this is against what whatsoever is not limited to something as even spaced samples. How to achieve this is Labview? A graph of waveform vi would be perfect if it was not by the fact that it works with even spaced samples.

  Thank you.

  Paulo Siqueira

  Your requirement is directly possible with LabVIEW.

  You can spend time to understand the difference between 'Chart', 'Graph' and "Graph XY".

  VI attached is drawing samples of unequal time.

  Hint:-right click on the 'XY' graph-> properties-> display-> 'Axis of X' = absolute time Format

  Kind regards

  Yogesh Redemptor

• VMotion error: host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1 'ecx '.

  Problem: I can't move my Exchange vmserver2 a vmserver1 server.

  Error: "host vmware cpu is not compatible with the requirements of the judgment of the VM to CPUID level register 0 x 1"ecx"

  
  Details:

  Vmware KB:

  * Ensure that the hosts have the same features enabled in the BIOS of the servers. If there is an incompatibility between the servers BIOS configuration even if they are physically identical, they always show a compatibility error message. The two most common to check features are the No-Execute memory Protection (NX / XD) and virtualization technology (VT / AMD - V).

  A ran the CPU utility Vmware as referenced by

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1003718

  
  "CPU that have similar features. "This means that the need of processors from the same manufacturer (AMD or Intel), be of the same family (Pentium, Xeon, etc.), and have common features extended between ESX servers involved in the VMotion.

  My results:

  vmserver1 Dell Inc.    PowerEdge 2950 2 Intel Xeon E5405 of CPU @ 2.00GHz
  vmserver2 Dell Inc.    PowerEdge 2950 2 Intel Xeon L5410 of CPU @ 2.33 GHz

  They both share exactly the same characteristics:
  FT support
  Enable VT
  VT Capable
  NX/XD
  FFXSR
  RDTSCP
  SSE
  SSE2
  SSE3

  Support Relaxations:
  NX/XD
  RDTSCP

  Relaxations unsupported:
  All THE features of the SSE
  FFXSR
  CMPXCHG18B

  In the 'Show Windows debug' it reads 'of the compatible CPU"

  This virtual Exchange machine works since Esxi version 3.5.  I am testing now vCenter Server 5.0 with version 5.0.1 on the Esxi server.

  Note: I've also been meeting random uses CPU high, leading from Windows Server 2008 to lock up completely.  I have found no trace of problems within the Windows host and Vcenter is not questions.  I have "reset" of the virtual machine in order to get the server back online.  The CPU to the top lock is random and the server can run for days with no problems. * Don't know if it's related...

  Virtual host config Exchange computer:
  Guest operating system: MS Windows Server 2008 64 bit
  version 8 of virtual machine
  CPU: 4vCPU
  Memory: 10240MB
  Overload memory: 420,61 MB
  vSphere HA Protection: protected
  Host CPU consumed: the 209 MHz

  Maps: vmserver1 watch "CPU is not compatible" CPU: 0% (none of the virtual machine running)
  Consumed host memory: 9823,00 MB
  Active memory of Fords: 409,00 MB

  Views of storage: I have a warning symbol on the QNAP iSCSI disk that hosts the virtual Exchange computer but I see no record... I'm new here...

  I understand that vmotion apply restrictions on the movement of VM compatibility to avoid it.  The components of the HA does not apply to these requirements.  We tested yesterday HA, succsessfully and this how we came to be stuck with the Exchange vm on vmserver2 and it cannot migrate to vmserver1.

  I appreciate your time and consideration,
  Tim

  It seems that you have two different processor speeds. Try the VCA mode and also check the BIOS version you and make sure they match.

• During the installation of Firefox 4 beta, he told me that it does not work on my Mac. When I go to system requirements, need a page for Firefox3.6 requirements. Where can I find the requirements for the beta?

  The link to the minimum configuration for Firefox 4 beta takes you to a page that gives you the requirements for Firefox 3.6 instead. I guess that the requirements for the beta are different, that I can't seem to install the beta on my Mac. Where can I find the beta version of system requirements?

  Firefox 4 will not work on the Mac PPC, for Mac it needs the Intel processor. There is an accumulation of third parties based on Firefox 4 beta, which should work on Mac PPC, for details, see http://www.floodgap.com/software/tenfourfox/

• I can not connect to a web site using my iPad. Message says required certificate required. No problem using my laptop. How can I get the required certificate on my iPad?

  EError message say site has no certificate, no problems until what I put at the operating system level. How can I get the required certificate on my iPad?

  Certificates are provided by the site. So if the site has a certificate expired or outdated, it may not work. In your case, the certificate No is probably not updated to work with the new software of Safari on your iPad,

  If all other Web sites running on the iPad except this one, I'll try to contact the manufacturer Web site. If a single Web site does not work, there probably nothing wrong with the iPad. In addition, certificates work differently on an iOS, as opposed to an OSX computer device.

  The only thing that can help on the end of your iPad is to delete the data from the Web site for this particular site. It might be the old data storage a before you update. To do this, go to settings > Safari > advanced > data Web site > Edit > remove data from the Web site.

  If you want to erase all data from the Web site, you can go to settings > Safari > clear the history and data from the Web site. Which will remove saved passwords and all data of the Web site, so don't do that if you know your password.

  Good luck

• How to move toward the front of the indicator chart of selected waveform

  Hello. I would like to put a number of indicators on the front (that's about 20 small flags or mauby more).

  When the user select one of them, the indicator is resized to the entire façade. The problem is that a number of small indicators appears as one resized was beneath them. I've looked everywhere and since 2010 (some people had the same problem) no solution has been found. I think property node with passage to the Front option has been added to labview (sp1 actualy 2015) - the problem, it is since 2010 - but unfortunately I can not find. Is there a solution to my problem?

  You could have a tab with hidden tab page selector. Have your small graphics on the first page and a single large graphic on the second page. When the user selects a small graphic in the first page, you programmatically move to the second page and feed the data required in the great chart. In this way it will look like magnified the selected chart. You can have a button of the left arrow on the second tab page that directs the user to the first page...

• How to save the data of different rates in a single VI?

  Hello

  I tried to acquire 2-channel measurement of voltage at 10 kHz and analyze data, finally to save the data to both 1 kHz and 1 Hz. What I did is this loop of producer/consumer use to do the work of recording at different rates. I have queued all the data in the main loop, and then removed the data and write it to the file in other loops. I added "wait = 1 ms' a consumer loop for recording data at 1 kHz (loop of fast logging) and added" wait = 1000ms' in another loop to get the slow 1 Hz (logging loop) data record.

  My problem is that the data record works fine in the case of 1 Hz, but it does not work for the case of 1 kHz. Although the time-out period defined as 1ms, the interval between two samples in the loop of fast data recording is about 100ms.  Subsequently, 1ms, 10ms, 100ms, 150ms tried in this loop to see what intervals are in these cases. I found that the intervals are same as assigned in the timeout greater than 100 ms, but if the time-out is set to 1ms or 10ms, the intervals are again around 100ms.

  My question is - why I can't reach data record 1 kHz using loop of consumers/producers, while the same way works for the case of 1 Hz?

  Thank you very much

  Hao

  You are sampling at 10 kHz and you want to back up your data "as if you sampled at 1 kHz and 1 Hz", if I understand correctly.  I also understand that you use the design of producer/consumer model to help with this (a good idea).

  I'm assuming that the producer 'product' a segment of data at a time, to say the value of a second of data or a 2 x 10000 I16 (assuming a 16-bit integer A/D) table you put into a queue and wait for the consumer.

  If you have data at 10 kHz, how do you get representations to 1 kHz or 1 Hz?  There are (at least) two possibilities - average data over the interval of proper time, or (re) sample data.  The good thing is that you can handle the situation 1 kHz and 1 Hz, essentially at the same time and in the same processing loop.  I'll discuss the case 1 kHz - with the assumptions I made, the case of 1 Hz becomes almost trivial.  I'll discuss treatment also just one channel, as it is similarly almost trivial to go from 1 to N-channel.

  If you have 1 second of data sampled at 10 kHz, and will "reduce" 1 second of data sampled at 1 kHz.  Note that you have 10 samples for each data point that you want in the end.  The "Averaging" method said "Replace all 10 points in the average of these 10 points", while "resampling" method said "replace 10 points with, say, the first point, ignoring the others.  An easy way to do this is to use the Reshape feature to transform an array of 10 x 1000 elements of your array of 10000 items 1-D 2D.  Now, you can use a loop FOR an average of 10 items or simply extract the first.  [This is where almost everyone, including me, a mistake - when you put a 10 x 1000 2D array in a loop, you get 10 iterations of 1000 items and we want 1000 iterations of 10 items.]  Oops, what to do?  [Simple - converts 2D array before sending in the loop FOR.]

  So when you have processed your 10,000 points and got both 1000 samples "1 kHz" and 1 "1 Hz" sample, you write each of them in their respective folder and wait for the next item in the queue of the consumer.  Consumer focus on the queue loop, it will automatically 'block', waiting for the producer of the 'feed' some data.  Note that the producer generates data once per second, producing 10000 points for the consumer in the process, but the time to deal with these points and perform the required disk i/o should take only a few milliseconds (certainly not more than 100, even if writing to a floppy!), so you don't have much time to do other interesting things (such as display data).

  Bob Schor

• The boxes "trace the legend" a link to Boolean values

  Hi all

  I save data to data acquisition of a waveform graph (where channels are displayed as plots of different color on the same chart) and I want the plots "unchecked" in the legend to go unregistered.

  Ideally there would be a sort of Boolean value associated with each checkbox which I could then use to say ' Yes, 'save' or 'no, do not save. ''

  Is it possible to do this? Or is there a better solution than that?

  I assume you are referring to the "plot visibility cases." You can use the two nodes of the graph property: Plot Active and Visible Plot. Together, those that you should get the information you want.

  Lynn

• unknown table to the LV9 chart size

  The attached program is used to measure a device at work, which currently has 3-band, for an indefinite period. It works great (although I'm sure that it is not written in recommended NEITHER!).

  My problem is changing the software to test devices that do not have 3 bands. For example, we have a device that has 128 bands. The majority of the program didn't need any changes, only the changes are essentially for the graph to draw.

  Ive wrote the code where I need help. The chart is necessary to trace the currents over time and also to trace the temperature over time (on the same graph). For a quick visual, it's all right.

  Or can anyone point me in the direction of a relevant example?

  Merry Christmas.

  Take a look at the attached vi, that help you?

• reset the encoder position different stepper

  I have a step by step (with encoder) engine connected to a NI 7350 motion controller. The encoder and the stepper have different number per revolution.

  I am trying to reset the engine to a zero position, count value is different for the stepper and encoder, with the Position.vi 'reset' under the control of the path, but it seems that I can only put them on the same value. How is it?

  -ray

  You have the option to add a secondary feedback.

  However, you can read next article.  As long as you set the parameters in MAX, he should be able to do the calculations in the background with respect to the commands that you send to the engine.  And then by setting the value of the primary feedback is not really a problem.

  For example let's say that we use the example in the article (1000 steps/rev and counts/rev encoder 2000) you start at position 0, provide an order of 100, it will make the 2:1 calculation and stop the drive motor once it has 200 impulses of the encoder.  Let's say you want to make of this new 'home' position, set you to 0 and from there.  If you set it to 0, say 150, which corresponds to 150 steps the engine or 300 counts of the encoder.

  In summary if you set the account/rev and steps/rev, Max the associated values order you will be in terms of engines.  LabVIEW will make the calculation of the rate required to stop on the County of appropriate encoder.

• Get the message that says that my iPhone wireless network does not meet the requirements of my network card.

  Adapter title: original network

  I use the network wireless from my IPhone and next to the connection, there is a message that says "the ability of your network adapter does not match the requirements of this network" it still works, but I don't know why I get this message.   The connection is blind.  The only thing I did differently is update my phone to 4.3.3

  Contact the iPhone support:

  iPhone Support
  http://www.Apple.com/support/iPhone/contact/

  Support forums:
  https://discussions.Apple.com/index.jspa

• Draw the dots of different colors and sizes

  Hello

  Is it possible to draw several dots of different colors and sizes?  Small size would be green, medium-sized yellow and big sizes Red?  I tried to use XY and field Multi-XY, but I'm not having much luck.  Looks like there may be a way to do it with ground Multi-XY if I use Plot XY cosmetics and size Scatter Plot cosmetic, but I can't find anything on the functioning of these two options and it did not have a lot of sense to me when I am just playing with it.

  Thank you!

  Gerd has the right idea.

  Say you have 3 ranges: < a,="" a-b,=""> B

  You check each data point as it came, to see who will he fell in.

  Build 3 separate tables and cluster each a vs a table 1 d of the corresponding X values.

  Then if you pass these 3 groups to a XY Chart, you get a graph showing the colors and different styles for each range.

• What are the requirements to load Windows 7 DSP on an existing PC

  Hi people,

  I have an existing PC on which I wish to install Windows 7 OS DSP/OEM.

  What is the minimum requirement of the material that I need to upgrade to remain legally compliant?

  Some retailers to group the DSP version with a hard drive or a mouse. Is that enough to comply with the requirements of the permit in the DSP/OEM OS?

  I would have thought that the requirement would be a new motherboard at least.

  Anyone who can shed some light on the obligation to legally charge the DSP/OEM OS on a PC of exisitng?

  Thank you

  It would seem that I am not clear.

  I know that the hardware requirements to run Windows 7.

  The contract of specific DSP/OEM that this version can not be used to upgrade the operating system to an existing PC.

  Do I have to replace my existing system while it is considered a new PC and I can then legally load a DSP/OEM operating system.

  I don't know how to put it any clearer than that.

  As with any OEM license:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades with the exception of the upgrade to an different model motherboard

  -OEM versions does not move directly from an older Windows operating system

• Application crashes if the same source code for both applications but the names is different

  Hello

  I have an application on said device "OldApplication", and it works fine. I've done some chnages in the same source code and also changed the name of the application to different say "NewApplication". Now both applications are present on the device. "OldApplication" works fine but when I try to open ' NewApplication "it hangs on the splash screen. I checked the event logs and got the trace of the exception uncaught,

  Name: error

  GUID: 9c3cd62e3320b498

  Time: July 22, 2010 23:26:47

  No detail message

  net_rim_cldc-3 (4AD92B52)

  ResourceBundle

  getObject

  0 x 9141

  net_rim_cldc-3 (4AD92B52)

  ResourceBundle

  getStringArray

  0x918A

  MyApplication-13 (4C487910)

  Constants

  0 x 477

  MyApplication-6 (4C487910)

  Main

  loadRes

  0x10B2

  MyApplication-8 (4C487910)

  Splash

  run

  0x1DEA

  net_rim_cldc-1 (4AD92B52)

  Thread

  run

  0xB332

  How is it a generation of application relates to another application? NewApplications resource files is in conflict with the OldApplication resource files are same in both applications?

  "NewApplication" works fine if I uninstall 'OldApplication '. In fact, I want two applications to work very well.

  All thoughts.

  Problem solved!

  When I rename all localization resources, java class files resource was not updated bundle id. It was referring old bundle id file.

  So I create new files resource and copied the old content file.

  Now, the two applications work correctly.

• Your device blackBerry smartphones does not satisfy the requirements of the system

  Hi, I just bought the curve 3G and I am trying to download app world but I get the message «Sorry, your device does not meet the system requirements that are needed to support Blackberry App World» I checked and I meet all the requirements. I am from Cyprus, having a service plan with MTN, greater than 4.5 and trackpad software version. Do you know what could be the problem?

  A BlackBerry data plan is required to use many features on your BlackBerry.  Basically, without a BlackBerry data plan, just what you can do is to call and send text messages.  Everything else, including BlackBerry Messenger, e-mail, surf the internet, requires additional features of a BlackBery data plan.  The plan that you currently have, even with the internet, is not sufficient on your BlackBerry phone.

  Different carriers have different levels of plans so make sure you tell your carrier you want to do on your phone so that the right plan can be proposed to you.

  I hope it explains quite well for you.