Traffic lights system

Similar Questions

• NB202-325BL - meaning of lights system

  I'm puzzled and frustrated after about 2 hours of research online I still have to find all the information on the system of traffic lights for a Toshiba NB202-325BL. Does anyone know what are the meanings in detail?

  For example that an orange flashing power light light system means when the laptop lid is closed and sitting Idol?

  Thanks in advance.

  Hello

  The Toshiba NB202 isn't known to me. Do you mean the NB200?

  Normally, you can find some information in your user manual. There you can find a description for each light to the system. If you don t have the user manual you can download it on the Toshiba site.

  Check this box!

• Cases and traffic lights selector

  Hello

  Need help with a code.

  I want to be able to indicate the stability of a light source on the front with a system of traffic lights.

  Stability can be defined as:

  1 not stable - value = 0.3-2

  2. partially Stable - value = 0.001 - 0.3

  3. stable - value = 0.000001 - 0.001

  Is it possible to use a "index Board" to lead instead of a state machine to do this.

  Nevica

  You can use the threshold D table 1.  See attachment.

• I want to create a sequence of traffic lights in labview

  Hello

  I am very new to Labview (first post here) and am learning by trying simple things.

  I am trying to create a system of traffic lights in continuous operation, RED, THEN RED AND AMBER, and THEN JUST GREEN, THEN JUST AMBER, THEN JUST RED and repeat the sequence.

  I have 3 of the 3 colors LED and at the present time they run, RED, THEN RED AND YELLOW, THEN RED AND ORANGE AND GREEN, THEN ALL OFF, and then repeats the sequence.

  I used a structure of matter within a while loop.  Set a status for each of the colors and the reset (-all).  I think that straight forward.

  Does anyone have advice on how I could add to what I learned to create the aforementioned fire sequence?

  Thank you very much for your time.

  PJ.

  You have passed the exam, so I'll join the VI this time (LV9, let me know if you need an earlier version).  You'd be surprised how many people complain of not be provided code, glad to see that you're a good sport.

  The constant matrix in cluster was created by right-clicking the control and selecting create Constant.  He just let me show a screenshot of the content of the sequence table.

  I added the delay as a small tip to always think a go ahead.  Finally you will be much more forward thinking, but start by looking at the next thing you want to do and try to keep your code flexible enough to cope.

• BitDefender traffic light not working not not in the Firefox browser

  I just started using the Firefox browser and have noticed that my Bitdefender traffic light function no longer works (it worked with I.E. and Opera browsers). This function checks Web sites when you perform a search and displays a green checkmark if Bitdefender thinks that the site is safe to access. I really like it and would like to know how to run in Firefox or Firefox does not support this?

  Download and use Bitdefender fires Addon

  • https://addons.Mozilla.org/en-us/Firefox/addon/TrafficLight/

• My Satellite A300 - I have a problem with the lighting system

  Hello

  I bought new laptop satelliite Toshiba's 300 and the lighting system does not work

  When I click on the tab illumination he cut the sound only and do not switch off the light...

  Best wishes

  Have you tried to reinstall the package of added value?

• Traffic lights for Multisim project

  Hello, I am designing a traffic light work for the sides both n/s and E/S of traffic (i.e. six lights). I'll build it later, for real, using the model of Elvis II. I was looking around other patterns on the web, I attracted many of these about Multisim and none of them work. It must also be a traffic light in the United States, like those of the United Kingdom is different. I tried a lot of different combinations, with the 555 timer and 4017 decade counter, but I don't know how these components actually work. I need help. The simplest circuit would be better, I know, as a kind of flip-flop RS or rocking JK (?). I know not how these components really hang together or how I am supposed to get the distribution right, where the red and green on both opposed will be lit during a required term, as 15 seconds for demonstration purposes and then go to the yellow on the green side was 3 seconds (after green turns off and the Red stays on with the yellow) and then it flip-flops to the Green and red on the other side 15 seconds. I don't know how to do in this regard. A good example would be very useful. Thank you, brett1405

  Thank you for your answer, but I have the circuit finally works. I need your advice in future projects, as we're going to build it with a microcontroller very soon. Thank you, brett1405

• five LED lighting system

  Hey, Im facing a problem of lighting the five lights one after the other in a 0.5 sec delay. I have a real contribution to the loop containing the leds to let her work continueously, can someone help me please find a way to solve this problem?

  my file is attached here.

  Thank you

  You close weve.  It is an excerpt showing fixed issue for cluster 2.  Reall you don't need to recreate the entire table for each itterarion.  I also moved the stop button to allow you to exit more quickly, without waiting the for loop of compleat all cycles.

  

  Continue to read the help file!

• Caps lock flashing light

  I have a laptop hp pavilion 2237nr PC g6, and recently the caps light lock began to blink continuously. It stops for awhile but then it starts up again. my laptop seems to work fine but I am very concerned about the blinking light. Please help I am panicking!

  The problem with your computer is just a little different from the next thread that yours always seems to be start the system and work while the caps lock flashes.  Just not sure what that means, but I think that if go you to sift through this post,

  http://h30434.www3.HP.com/T5/notebook-lockups-freezes-hangs/laptop-won-t-boot-caps-lock-button-light-blinking/TD-p/1300161/page/2

  you might get a few suggestions.  In the post is a link to a document "traffic lights" which may also be useful.

  Good luck

• Omen of HP: HP keyboard light Isuues Omen

  Hello

  Recently bought a harbinger of HP, in the first few weeks of use worked fine but recently the backlit keyboard stopped ligting upward, the only lights that work now are the power button and animated speakers all keys, including the macro keys now have no backlight. First, I tried to find out if it was a problem with the control center of HP Omen, but all that happens is when changing the color, it turns on for a matter of half a second, then the blip again, I have the LED on its maximum intensity and have tried all of the colors, the fact that it lights up for a split second then off again makes me doubt is a problem with the lighting system and well more still to do with windows. I tried to uninstall the control center of Omen and reinstall it but that had no effect at all. I was wondering if anyone had suggestions for a way to fix it because it is an important part of the laptop that is not working and a major inconvenience for me as I play in a room with a very low light, so have a backlit keyboard for me is essential. Any help would be appreciated!

  Dear Harrycypress101-

  I understand that the backlit keyboard of your new HARBINGER does not work.  I did a little research and apparently, after a BIOS update, the keypad backlight turns off.  I don't know if you have made an update of the BIOS, but by pressing F5 to turn it back on.

  If F5 does not resolve the problem, then check that your OMEN is updated using the document Support from HP using HP Support Assistant (Windows 8).

  If none of these suggestions resolve the issue, you may contact HP to service. Since your OMEN is new, it is still under warranty. Check the status of your warranty by going to check the status of your warranty.

  Good luck

  DHTP

• HP Compaq Presario CQ62 blank display, solid caps lock light light orange, solid f12

  Good afternoon

  Currently, I'm stumped on troubleshooting lights error code for a hp compaq cq62 customers. I tried the hard reset, the reinstallation of the memory and even plug the laptop directly into the wall instead of a surge protector with battery removed. I can't find any solution on the HP site or any other site of forum for this issue as to what a solid caps lock light and a solid orange light on the f12 key.

  Currently I think the customer may need a new back light system or a new processor. Before to come to this conclusion, I hope that there is a clear solution for my problem. Thank you for any assistance.

  Hello @NotURt3kSupport ,

  Welcome to the HP Forums!

  I understand you are having problems starting your PC clients laptop Compaq CQ62.

  A single glance on the caps lock light usually means it is a failure of the CPU and requires a replacement of CPU or the motherboard.

  Also try to go through these documents to resolve startup problems:

  Computer does not start and the lights blink or the computer will beep.
  Troubleshooting of the black screens with no start-up or start-up error message.
  Tests of hardware failures (Windows 7, Vista) or hardware failures (Windows 8).

  You can tell if the backlight is the issue or start by plugging in a VGA monitor to see if the screen is displayed or not. If this is the case, you have on the laptop display problems. If it isn't, you're dealing with a problem of CPU, GPU or motherboard.

  Also, it would be useful to know what product and the operating system you are using. For more information on the search for your model and product numbers, click here: How can I find my model number or product number? What version of Windows you are using, click here: Windows operating system am I running?

  In the event of hardware failure I suggest you contact the services options HP telephone support. You can contact HP Technical Support at 1-800-474-6836 in North America. For all other regions click here.

  Hope this information helps!

• Light green RPS on 3750 switch

  Hello world

  I have stand-alone switch 3750.

  RPS led is green and light system is off.

  3750TS env #sh all the

  The FAN is OK

  TEMPERATURE is OK

  SW series PID # status Pwr Sys PoE Pwr Watts

  --  ------------------  ----------  ---------------  -------  -------  -----

  2 integrated good

  Status of SW RPS name RPS no_serie RPS Port #.

  --  -------------   ----------------  -----------  ---------

  2 does not<>

  3750TS #.

  I have another switch with the same model and ios that its light RPS is off and the system led is green

  Thank you

  Mahesh

  Hello Manu,

  So, given that the switch works well, so there could be something wrong with the light, front or the mode button which are all cosmetics and should not impact on the switch.

  HTH

  Reza

• Alienware 14 FX lights problem.

  Hello

  I had my alienware 14 for about a month now, happy enough with it.

  But from the very first launch, bottom right seeing fx is always lit in red color.

  I can change the color to blue (or any other color), but it will look like red purple being allso active.

  So recently, I noticed that when I play 2 payday on my AW 14 and let the game take control of my FX lights, the red light turns off.

  And even when I close the game of red light will not go again, just when I restart my laptop it goes back.

  Is it possible to allways turn off the red light?

  Sorry for my bad English; p

  Hi Rensku,

  We have seen this behaviour before with some programs that affect the lighting system.

  Try to perform a clean boot. Order this link to find out how.

  Do not disable the Alienware command center and AlienFX services (in order to allow their just check the box next to the service).

  Let me know how it goes.

• Missing "Fire" Mac system?

  Just noticed high standard "traffic lights" (left screen) can not be seen or initiated. I have them switched inadvertently to offshore? How can I get em back please?

  Thank you very much

  Richard

  Go to the bar of menus and do window > screen Mode > Normal.

• After Effects lights not working not

  I work in the after effects CC. I added a light to my scene and she turns just all my black 3d layers. I am a very experienced user of AE. I worked with front lights. I don't know what is happening here. It is not a question of fashion project. And my lights are not behind my diapers or something like that. I found other people in online forums with this problem among the years, but never a solution. Ambient light is the only light that works. At the same time, PIN and Spot turns all black. Thoughts?

  The problem is the RADIUS and distance of withdrawal. With the fall off the coast of the distance at 24 and 75 RADIUS when you light is the bright spot of layer 24 pixels away from the 3D will be 75 pixels wide. By the time you pass the light about 100 pixels (4 times the distance) mitigation will be almost complete, so no light will fall on the layer. Change mitigation in contrast to the square and you will be able to switch the light on another 100 pixels away before the light is no longer reached the layer. Mitigation set to None and the withdrawal distance and RADIUS will have no effect. The radius of the effects as the distance where the lights stop to reach the light. If you want falloff then you will need to experiment with these settings to get the lights to behave as you wish, but 24 and 75 are much too small for a reasonable 3D lighting system.