Transfer Flash for Flash

Similar Questions

• I just bought a new computer running W8. Can I transfer files from a XP 32 bit box use transfer Windows for XP to w7?

  I did find a program of easy transfer designed for XP to W8.

  See here:

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/Windows-easy-transfer

• How to use transfer windows for xp to xp. When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  How to use transfer windows for xp to xp.  When I plug usb computers are delivered to the top with the same screen and when I try to use the transfer to the new computer, it just said information gathering and sits for hours

  Hello, welcome.

  The process is automatic and the maximum transfer rate should be about 20 GB/HR. If the process crashes during that long of a time, it's probably because of something internal rather something you're doing wrong.
  For reference purposes, I included this link. It goes into the details of the migration from XP to Vista (and the basic steps you follow). The instructions are for migrating to Vista via the network, but you can easily follow the steps and choose a different option for your specific installation.
  http://www.windowsnetworking.com/articles_tutorials/migrating-Vista-using-Windows-easy-transfer.html
  For both machines, I recommend you to prepare for the transfer using the following procedure:
  1. click on START > run

  2 type "msconfig" (without the quotes) and press enter

  3. go to the "Startup" tab and uncheck all the entries displayed

  4. click on 'Apply' at the bottom right

  DO NOT RESTART YOUR COMPUTER AGAIN

  5. click on START > run

  6. Type "cmd" (without the quotes). Right-click on the result at the top of the menu START and select 'run as administrator '.

  7. type chkdsk /r and press enter

  8 allow the system to attempt disassembly of the volume

  9. allow the system to plan restarting

  10. restart your computer

  11 let checkdisk analyze the file system on your hard drive

  12. Once completed, perform the same steps on the other machine

  13. Once completed, repeat the transfer

  
  Let us know what happens

  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I'm filling out a form to transfer license for Adobe Acrobat Pro XI who is transferred to another employee in our company for me. The instructions are the form indicate to attach to a file number. How can I get a case number?

  I'm filling out a form to transfer license for Adobe Acrobat Pro XI who is transferred to another employee in our company for me. The instructions are the form indicate to attach to a file number. How can I get a case number?

  Use a browser that allows cookies and pop-up windows, please contact adobe for hourly pst support by clicking here and, when it is available, click "still need help," https://helpx.adobe.com/contact.html

• How to transfer photoshop for p c to a Mac?

  How to transfer photoshop for a C P on a Mac?

  Hi Nancy,.

  You can just follow the instructions given in this guide:

  How to move Adobe software between computers, or from Windows to Mac

  Hope that helps! If you have any other questions, just post back.

• cannot transfer music for now if he says using ipod, then you can change it again

  Original title: I am trying to transfer my music from IPOD to computer of mew and the USB slots don't recognize my memory stick. What can I do to get them to recogniaze it?

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hi Charlie RR,.

  ·        You try to copy files from the iPod or you are trying to move music from a computer to another computer using a memory card?

  Try the steps listed in the link below and check if it helps: a computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive: http://support.microsoft.com/kb/925196

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Purchases don't transfer MacBookPro for iPhone

  Hello everyone,

  Ive had a few difficulties to sync my purchases, I bought on the iTunes Store on my iPhone.

  Some of the albums I bought can be easily transferred to my iPhone without any problem. But, some of the albums for some reason any will not transfer to my iPhone. I use the same apple ID, the same country, I already tried to desauthorize and again, to update the software and nothing don't allow, no apple support.

  For some reason, when I get on the iTunes Store app on my iPhone, this albums appear like this:

  

  

  All gray. When I click on download all, nothing happens.

  When I go to my music purchases, the album is not there.

  Usually I can find answers in the internet, but nothing helped.

  (Sorry for the bad English, Im from Brazil...)

  Can someone help me?

  The Red 'E' against the slopes means that they are explicit - on your phone do you currently have explicit music blocked via settings > General > Restrictions > music, Podcasts & News > Explicit "off"?

• Help with Husqvana transfer 3D for Windows 7 XP

  Husqvarna 3d will not be copied in windows 7, you can tell me how I can do this. I want to transfer my embroidery on my Windows 7 and can not. Help!

  I've heard XP did put at day end October so need to do very soon.

  It is unclear what you mean by "won't copy.  If you're having trouble installing the software 3D of Husqvarna on a Windows 7 system, see--> http://www.joeldare.com/wiki/installing_husqavarna_3d_embroidery_on_windows_vista

  Download the files directly from the page with instructions, or the following:

  Here's where you get the upgrade patch 7.25 and the "patch Vista dongle"--> http://www.vsmsoftware.net/Registration/3D/Updates.htm

  And it is the site of "Other useful software" for the "the Hasp dongle driver'--> http://www.husqvarnaviking.com/ko/8588_4197.htm

  Also, see--> http://www.secretsof.com/wp/?p=1433 and note that:

  If you bought your professional Husqvarna Viking 3D embroidery system after April 1, 2006, you will be entitled to a free upgrade to the Husqvarna Viking 4 d professional embroidery system; Check your details in the VSM software product registration database. Please ensure that the details of your authorized dealer are also correct, as in most of the cases your free update will be delivered to your favorite retailer.

  Finally, Windows XP support must end on April 8, in order to have a little more time than the end of October.

• Acer Aspire E5-521-85EX does support up to 3 or 6 Gbit/s transfer rate for HARD drive?

  I would like to install an SSD that supports 6-gb/s data transfer rates, but this laptop support it?

  You are right.

  For your laptop computer, the interface of the original HARD disk speed is 6 Gbps (WD WD10JPVX).

• Unable to transfer music for Apple iPod touch (4th generation)

  My operating system is Windows XP.  I have Windows Media Player... and I Tunes on this laptop.  I'm to believe that these two software are incompatible... I can't transfer my music from Media Player on my IPod it does not sync and I downloaded everything imaginable.   Of course, no problem with ITunes.  I had not had a problem before with my old ipod...  That would you suggest I do... In addition to pulling my hair!...

  This question is a bit more complicated than you think.  It depends, at least in part, on the format is your music (mp3, aac, wma, etc.).

  Of course, Apple does not offer formal support for the use of iPods with WMP, but it can be done.  Take a look at the last post (by John Lockwood) in this thread: https://discussions.apple.com/message/16270986#16270986

  If it (and the free app related) do not resolve your issue, do some additional research in the Apple support forums, or ask your own question here.

• Transfer desk for laptop windows updates

  I am planing to rebuild this computer and I would like to transfer all the updates of windows that I have accumulated over my laptop. The laptop has never been connected to the internet. Both are running Windows XP Office with all Windows updates. Maybe I need the laptop to access Internet when I make rebuilding if something does not work. I could just connect to the laptop and let it download the updates but I'm here in dial-up land and it would probably take a month or two.

  You cannot, if you downloaded updates of Adminastrative, which is the full update pkge, you could, but downloaded winupdates are not the complete installation pkge.

  MS usually done sp updates available on the disk on the agenda, but I don't know if they still do for winxp

• transfer desk for laptop product key

  Last year, I bought Windows Vista Home premium OEM software for my office...   How can I transfer the key now to my laptop... Thank you

  You can not.  Software Vista OEM installed are tied to the machine, it was originally installed on, and cannot be used on this one machine.  It cannot be transferred to another computer (even if the first is broken).  That's how OEM licenses work.  If you bought a copy retail for Vista then it can be transferred to another machine - but installed on a single computer at a time.

  See the following about replacement for a software that can help: http://support.microsoft.com/kb/326246.

  Sorry if this isn't what you wanted to hear, but it's like that.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Slow transfer speed for USB 3.0 ports

  I have a USB 3.0 Seagate external hard drive connected directly to one of the USB ports 3.0 at the back of the computer with the cable that came with the drive. Whenever I turn it on, I get the message "this device can perform faster - this USB mass storage device can transfer information faster if you connect it to a USB 3.0 Super speed.

  I tested the speed of the hard drive and transferred on a file of 1.16 GB in 58 seconds of my drive "C".

  I also transferred the same file in the same place, for comparison, on a hard drive 10 years from an old computer which is now in a closed Chamber. This hard drive is also plugged into a USB 3.0 at the back of the computer with a USB 2.0 cable and the files had 57 seconds to cross.

  So that would mean that the Seagate drive does not work at the speed of USB 3.0.

  Can you please advise me as to how I can get the right speed for my USB 3.0 ports?

  DesF,

  You can check for a driver to chipset update for your system.

  Please keep in mind that it is a rotating disc and data transfer speeds do not match the theoretical bus speed. Certainly not the often claimed "ten times faster than USB 2.0! In addition, there a 5900 RPM disk, so a little slower there also.

  A tweak, you can try is to make sure that drive policy properties tab is set for best performance.

• Application blackBerry Smartphones from device to memory card transfer? For BB 9720

  Dear Sir

  I have a big problem for the application of transfer of device on my memory card.

  How are you going to install all the applications in the terminal on a memory card?

  I need an answer because my terminal is full (rest 2 MB) and my memory (1 GB of rest) card.

  Is it possible? Please help me!

  Thank you

  I'm sorry but this is not possible.

• License transfer windows for laptop broke to a desktop computer

  I have a laptop purchased from the United States, when I go there, and then go home to Asia-Pacific. After 1 year and 9 months, the motherboard has failed and I have not been able to find a replacement nor got it fixed. Can I transfer a license windows 7 Desktop in this case?

  If the license of Windows 7 is preloaded with the laptop, the answer is no. OEM licenses are not transferable. If it is a license purchased in retail store you bought, then Yes, you can transfer and reactivate by phone:

  How to activate Windows 7 manually (activate by phone)
   
  1) click Start and in the search for box type: slui.exe 4
   
  (2) press the ENTER"" key.
   
  (3) select your "country" in the list.
   
  (4) choose the option "activate phone".
   
  (5) stay on the phone (do not select/press all options) and wait for a person to help you with the activation.
   
  (6) explain your problem clearly to the support person.
   
  http://support.Microsoft.com/kb/950929/en-us