Tried to scan the document.  Received error message - INVALID parameter

Similar Questions

• While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  Here's the situation.

  First of all only started to the top of my Asus to find was no sound. Following up to plug-and-play service has not started. It is now removed apparently.

  Here are the solutions I tried, in and out of safe mode:

  While the plug-and-play was still there at all, and I tried to go I still receive error message 2. could not locate the file.

  In CMD sfc/scannow reached 32%, then breaks down, saying: it finds corrupted files, but could not fix.

  It Startin via msconfig did not work.

  Tried to go through Device Manager, which is completely empty for some reason any.

  System Restore is restoring before this problem. When you attempt a restore, plug-and-play service is not returned to the existence, defective or otherwise.

  I knew, but there may be malware, mutiple scans with several services did not find anything.

  I tried to contact microsoft help and they might suggest only I have upgraded to windows 10. Tried several times, and he has failed to be upgraded, every time. For the most part just download windows 10 and then by restarting the computer as if nothing happened. Any ideas on how I can fix this?

  Hello

  Welcome to the Microsoft community. I will certainly help you with the problem you are experiencing.

  I would like to ask you:

  • You are running Windows 7 or Windows 10 on your PC?
  • When was the last time it was working fine? Remember to make changes to the computer before this problem?

  Given that you are unable to complete the scan of SFC and Task Manager is empty, usually reinstall or do a repair install is the best choice of action. However, we can try to fix these files and check if that helps. To do this, refer to the steps below:

  1. Open the start menu and type "cmd".
  2. Right-click on the command prompt and click "run as administrator".
  3. Type the following commands and press ENTER after each.

  DISM.exe / Online/Cleanup-image /Scanhealth

  DISM.exe / Online/Cleanup-image /Restorehealth

  After you run these commands, restart the system and check.

  You can also view,

  Difficulty errors of corruption of Windows by using the DISM tool / System Update Readiness

  https://support.Microsoft.com/en-us/KB/947821

  If you are using Windows 7 and have the product key for this. You try to run an upgrade in Place to fix all the corruptions.

  Refer,

  How to perform an upgrade on the spot on Windows Vista, Windows 7, Windows Server 2008 & Windows Server 2008 R2

  Hope this information was useful.

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Installation of Java has wiped out everything on the computer receiver error message: "windows-delayed write filed" hard drive failure ' x 5

  I installed java and it wiped out my computer, no program, no picures, no parameters on the left? He even wiped my restore points.

  I tried to restore to the point of installation of java, but alas nothing has happened, now I get all these boxes warning "windows-delayed write filed" hard drive failure ' x 5 and also warning mean my HDD is in peril of the personal data.  This single icon left on my desk is the internet explore and internet runs very slowly, I am reluctant to sign something incase, there a virus or something.

  Please help me!

  Hi Carolinelightfoot,

  This error message occurs when the system could not read and write data to the registry file. The error indicates a problem with the registry.

  Method 1:

  You can run a Checkdisk to see if there are drive errors that can cause this problem.

  Check your hard drive for errors

  Note: When you run the disk check, there is a chance of losing the data that you can take a backup of important data before you run checkdisk.

  Method 2:

  You can also try to boot from a full version of Windows Vista installation disc and try to perform a restore of the system to WinRE (Windows Recovery Environment)

  What are the system recovery options in Windows Vista?

  Hope this information is useful.

• When you try to save an image from the internet, receive error message about c:\windows\system32\mshtml.hlp

  whenever I try to save an image on the internet file I get an error message saying 'cannot create the file because of the c:\windows\system32\mshtml.hlp' not being installed and I have to reinstall it. but I couldn't find it on the site of pe windows so I can't reinstall it. any ideas?

  It's that there is no such thing as a since.that file bug. Well this isn't on this subject in XP.  And as noted here.  And here

• When trying to install XP sp3 receive error message "access denied."

  @meisj0n: to avoid confusion, please start a new thread about your specific problem and your computer.  Indicate your IE version and the full version of Windows (for example, WinXP SP1;) Windows XP 64 - bit SP2) in your first post.  Thank you. ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  Sorry about that: P I see that you are in a large number of forums. has been through a lot of things yesterday. nothing has really worked. Yes, info on the comp IE 8.0.6001.18702, since a recent updated Version. Works fine now after using default automatic updated the first couple times. CPU: Intel (r) Pentium (r) 4 CPU 2 .80GHz motherboard: Dell (0F5949) RAM: 510 mb Hard Drive: 74 GB (ST380011A) graphics card: NVIDIA GeForce FX 5200 XP: Microsoft Windows XP (2600) Service Pack 2 32-bit

  Hi Robear,

  I'm having a problem with the installation of SP3 for XP Edition family. I have no updated two years ago because all updates have been making my computer lag (and I have them turned off).

  Now, I tried to be diligent and save my computer died. Latest things I've done included installation COMODO System Cleaner and the task of the clean computer. In regards to SP3, I get an error saying: access denied. I tried following this thread: http://support.microsoft.com/kb/949377/. Did not work. I hope that http://support.microsoft.com/kb/950718/en-us will work:

  In addition to this problem with SP3, update in C:\Windows\SoftwareDistribution log shows that I was not able to install Microsoft .NET Framework 3.5 Service Pack 1. I read everywhere, but still don't really know if I should update the .NET framework. currently have versions 1.0.3705, 1.1.4322 and 2.0.50727. Thank you very much

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool:http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. double-click on the file that you saved in #1 above to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4. If IE7 or IE8 installed, reset IE by http://support.microsoft.com/kb/923737.

  6 reset Windows Update by...

  How to reset the Windows Update components?
  [Access KB971058 via Internet Explorer (32-bit) only; Run the difficulty in DEFAULT and AGGRESSIVE mode]
  http://support.Microsoft.com/kb/971058

  7. restart & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If still no joy, there is a good chance that you see the effects of a hijackware infection!

  NB: If you had no installed anti-virus application or subscription has expired * when the machine was first infected * and/or your subscription has expired since and/or the machine is not kept fully corrected in Windows Update, don't waste your time with any of the following: Format & reinstall Windows.  A repair install won't help!

  Microsoft PCSafety provides users at home (only) with free assistance in dealing with infections by malicious software such as viruses, adware and spyware (including unwanted software).
  https://support.Microsoft.com/OAS/default.aspx?&PRID=7552&St=1

  Also available via the homepage of Support of consumer safety: https://consumersecuritysupport.microsoft.com/

  Otherwise...

  1. see if you can download/run the MSRT tool manually: http://www.microsoft.com/security/malwareremove/default.mspx

  NB: Run the FULL scan, not analysis FAST!  You may need to download the MSRT on an uninfected machine and then transfer the MRT. EXE to the infected machine and rename it to SCAN. EXE before running it.

  2A. WinXP-online Windows Live Safety Center scanner 'Protection' (only!) in Mode safe mode with networking, if necessary:http://onecare.live.com/site/en-us/center/howsafe.htm

  2B. Vista or Win7-online this scanner instead: http://onecare.live.com/site/en-us/center/whatsnew.htm

  3. now post the logs required in a forum appropriate for support by an expert in the field. DON'T SKIP THIS STEP!

  I can recommend the assistance of experts available in these forums: http://spywarehammer.com/simplemachinesforum/index.php?board=10.0, http://www.spywarewarrior.com/viewforum.php?f=5, http://www.dslreports.com/forum/cleanup, http://www.bluetack.co.uk/forums/index.phpand http://aumha.net/viewforum.php?f=30

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Impossible to download the movie, receive error message: error-2002 a bad public movie atom was found in the movie.

  Original title: error-2002 a bad public movie atom was found in the movie

  I get the following message when tring to down load a short video that sent me a friend. (error-2002 a bad public movie atom was found in the movie).

  Hello

  What is the type of film that you download?  AVI, mp4 to move?

  You said he did before, hs there been changes to the system since the last time it worked?

  Anything added/removed or set to level?

  B Eddie

• Unable to connect to the Internet, receive error message: DEBUGER END WIRE.

  Original title: unable to connect to the Internet

  Hello

  I am using Dell inspiron 1525 with Win.Vista Home Premium 32 bit

  When I connect to internet I displays message DEBUGER CANCEL THREAD

  There is no driver problem

  Someone help me

  I thank & regard

  Satish Baker

  Hi Sissi,

   

  1. you are using a wired or wireless?

  2. do you and changes to the network card or manually change all the settings?

  3 when was the last time it worked?

  4. are you tring to set up internet connection in windows vista for the first time?

  Please follow the links below to solve the problem.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

  See also this: the problems of Internet connection

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

  I hope this helps!

• Unable to connect to the laptop, receive error message "the user profile service failed.

  can not connect to the computer

  * original title - I can't connect on the laptop when I put in password says the USER PROFILE SERVICE FAILED THE LAGOON AND DO CAN NOT BE LOADED a *.

  Hi vincentbyrne

  
  What operating system is installed on the computer?

  You can refer to the link below and use the provided steps to identify the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  
  If you are using Windows Vista or Windows 7 based computer you can see Microsoft article provided below and check if the measures help -.

  http://support.Microsoft.com/kb/947215

   

  I hope this helps.

• I'm trying to scan a document using my dell scanner, but I get the message: 'an image to the application of the texts is provided for you on your cd in the OCR file.

  Original title: Dell Imaging toolbox: analysis: change Image text

  Trying to scan a document, I get the message: an image to the application of the texts is provided for you on your cd in the OCR file.

  -Cancel, install your ocr software, try again.

  There is no image to the application of the texts in the file of the ocr, Abbyy and Recore and neither has the image of the application of the texts.  Heeeelp!

  Communicate with people who have done your scanner and ask them to supply the missing software.  Without this you will not be able to proceed.

  "blessedandhighlyfavored" wrote in the new message: * e-mail address is removed from the privacy... *

  Trying to scan a document, I get the message: an image to the application of the texts is provided for you on your cd in the OCR file.

  -Cancel, install your ocr software, try again.

  There is no image to the application of the texts in the file of the ocr, Abbyy and Recore and neither has the image of the application of the texts.  Heeeelp!

• Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

  Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

  Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

• Received error BSOD, ran Diagnostics, got the error code 2000-0146, tried to boot from different HARD drive, got the same stop error message

  So my friend gave me his computer dell laptop. The thing would boot normally for a few days until he would give me a blue screen of death with the "UNMOUNTABLE_BOOT_VOLUME" message constantly to not even upward. I ran the diagnostics and got the error code 2000-0146. What I've read, this code error means that the HARD drive is bad and must be replaced. So, to make sure that it's the hard drive, tried to boot from an old hard drive, I got around the installation by USB and windows gave me the same stop error message. May - so that means it's a motherboard problem?

  No, it isn't - unless the operating system was installed on this drive AND the system in question, that it won't work as a bootable drive.

  Unplug the system, remove or disconnect the battery and hold the power for 30 seconds approximately.  Turn on and re-run the diagnostic tests - if the same error appears again, the drive is bad.  Replace it.

• Windows Media Player cannot burn CD - R music. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.

  Can't burn music CD - R. Worked fine until today. C00D10BA received error message. Windows media player cannot find the file. He said to repair or remove a link.  What is an easy way to find and fix this? I know little about the links and need a simple way to fix... Thank you!

  Hello

  You got the C00D10BA error message when you use Windows Media Player. The following information
  might help you solve the problem.
  http://www.Microsoft.com/windows/windowsmedia/player/Webhelp/default.aspx?&mpver=11.0.5721.5260&ID=C00D10BA&ContextId=89&OriginalID=C00D10BA

  Don't forget to click on the four " + " to see more help.

  Support for Windows Media Player
  http://support.Microsoft.com/ph/7763

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Can't share files and printers on the network. Error message: Server service is not started.

  I CAN'T DO FILE/PRINTER SHARING.

  I GET a MESSAGE SHOW "SERVER SERVICE NOT STARTED" I ALSO TRIED WINDOWS HELP AND IT SAYS HELP AND SUPPORT NOT START. HOW CAN I GET THESE TO START AUTOMATIC

  What version of Windows, including the service pack is installed? (Do right click my computer and select Properties, if you do not know)

  The method 1 and method 2 in this article--> http://support.microsoft.com/kb/885859

  If you're in the Services applet according to method 1, also make sure that the Startup Type is set to automatic (to resolve, double-click the entry in the Services; Startup type is under the general tab).

  You can also start Help and Support by using the Services applet (its Startup Type can be manual or automatic).

  If you receive error messages when you try to follow the steps above, report completely, without paraphrasing.

  The fact that two fairly common services do not work can mean that something more sinister is happening.  What antivirus application do you use?  What's his current subscription?  Its subscription has already been authorized expiration?

  You can download, install, update and run MalwareBytes AntiMalware (it of free and can be removed later if you wish).

• How to catch the exact validation error message?

  Hi experts,
  
  I want to intercept the exact validation error message.
  If the validate operation fails then I get the following SOAP fault:
  
  < env:Fault xmlns:ns0 = "http://docs.oasis-open.org/wsbpel/2.0/process/executable" >
  ns0:invalidVariables < faultcode > < / faultcode >
  faultName < faultstring >: {{http://docs.oasis-open.org/wsbpel/2.0/process/executable} invalidVariables}
  messageType: {{http://schemas.oracle.com/bpel/extension} RuntimeFaultMessage} < / faultstring >
  < faultactor / >
  < detail >
  < exception / >
  < / details >
  < / env:Fault >
  
  However, in the Manager of the company (audit trail) I see the following message to the failure to validate the operation:
  
  Invalid data: the value of the variable 'req_ProcessAdjustmentOp' part 'bodyUPI' does not match the schema definition for this part of invalid text '?' in the element: 'date '. Invalid xml document is shown below:
  
  I would like to send this message to the service consumer because it contains more information about the error. How I do that? I've tried the function ora: getFaultAsString() but I had the original sin.
  
  Thank you
  Viktor

  The root cause of the problem is that, in the bpel fault lifted, the details of the fault are empty (i.e.) {summary}, {details} and

   are not populated for  element.
  This same issue was logged and tracked via Bug 12551111 - VALIDATE ACTIVITY DOES NOT POPULATE FAULT VARIABLE FROM CATCH - published on My Oracle Support.
  
  As per developments update in 12551111 :
  Failure content won't be set for standard faults according to BPEL specs. It will be available in the audit trail.
  
  This means that :
  1. {summary} , {detail} and 
  

  will be omitted for standard faults fault variables.
  2. given that the details of 'fault' are not met, "validation" of the variable of fault against the schema (RuntimeFault.wsdl) should fail.

  There is a demand for improvement already filed: Bug 12700279 - FAULT VARIABLE DETAILS ARE NOT POPULATED for STANDARD HOLES.
  Unfortunately, at the moment there is no workaround known solution for this.

  Best regards
  Oana