Try to define multiple versions of a variable in the input area

Similar Questions

• Using a Global Variable for the input recorder DisplayRange

  I'm assuming; Since I can't do it; that you cannot change the display range of a graphic recorder by using a variable.  If there is a way I'd love to know how.

  Thank you!

  Determine if you can use a global variable is to click right in the parameter field. If the global variable is available in the context menu, then you can use a variable y.

  You can use a variable of the y-axis from the settings.

  You cannot use a variable for the display range of the x-axis parameter. This is because DASYLab needs to know the amount of memory to be allocated at the beginning of the measure.

• "[Error number: 0 x 80244019] ' when you try to update; also repeated (wrong) message indicating that the modules are disabled.

  Ive just made on my computer disaster recovery and have experienced significant problems when you try to download updates from windows, a message indicating: "the website has encountered a problem and cannot display the page you are trying to view," appeared on several occasions accompanied by "[error number: 0 x 80244019].  I tried the antivirus program malware removal tool and ensured that my computer has been configured for the installation of updates, according to the instructions on the microsoft Web site, but nothing works, I have also ensured that the features activex in my internet security settings are enabled.  There is another extremely irritating aspect to this problem: I am repeatedly received a message that my "Add-ons" are 'disabled,' when in fact I have ensured that they have all been activated.

  Hello

  I found the specific problem last night on another forum thread.  In fact, my computer is an older edition that had Service pack 2 installed.  As this service pack is no longer accepted by the Microsoft windows updates, updates of the said installation has failed, causing "error 0 x code 80244019."  After the upgrade to service pack 3, I found that the problem be resolved itself.

• CS6: export "range of time markers" without defining in - entry / exit point or set the work area?

  Hello

  in CS6, I've defined several "range of markers of time" to get a better overview of my project. Now I want to export each range in a single video.

  The only way to do it is to create in - entry / exit points or the definition of the work area (which is the English translation of "Arbeitsbereichsleiste" (German),...?)?

  Or is it possible to set this selection through the established range of time markers? That would be the easiest way...

  Thank you, Carlos

  I don't believe it.  The markers are a few guides, really.  They do not control a lot.

• try to delete multiple bookmarks I can't find the link "organize bookmarks".

  Trying to delete multiple bookmarks, Firefox help tells me ' on the menu bar, click Favorites, and then select organize bookmarks... ". »

  I find no 'organize bookmarks '.

  iMac OS X 10.6

  It is now called "Show all bookmarks" which have the same functions as before.

• How the variable in the data area?

  in the XML file, I have

  < list >

  < event_id > EMB10 < / event_id >

  < col1EMB10 > ALL < / col1EMB10 >
  < col2EMB10 > 0 < / col2EMB10 >

  HON < col1EMB10 > < / col1EMB10 >
  < col2EMB10 > 1 < / col2EMB10 >

  < / list >

  < list >

  < event_id > EMB11 < / event_id >

  HON < col1EMB10 > < / col1EMB10 >
  < col2EMB10 > 1 < / col2EMB10 >

  < / list >

  
  I want the datagrid control to display above value.

  When the drop-down list select event_id EMB10, the data area should be as below
  dataField = "col1EMB10."
  dataField = "col2EMB10."

  I did, but they do not work:

  dataField ="

  col1 | "| {cboActivities.selectedItem.event_id} |' "

  dataField ="col2 |" | {cboActivities.selectedItem.event_id} |' "

  Pleas help!
  Thank you in advance!

  It is also as expected.

  You have to the first grid:

       ALL THE
  0
  HON
  0
  Of course, you can say you want 2 lines in the result and it looks like this:

  ALL THE | 0

  HON | 0
  But it is unclear what col2YUD09 should be with what col1YUD09. In this example, you have two 0, so there is no difference. If you have
  ALL THE

  1

  HON

  0

  What should be the result?

  ALL THE | 1

  HON | 0

  or

  ALL THE | 0

  HON | 1

  ???

  There is no any order in xml!

  Data should be as

  ALL THE

  1

  HON

  0

  And dataProvider - cboActivities.selectedItem.item

• Multiple selection with binding variable error

  Hello world

  I tried to put in place an array of adf multiple selection with another table, by following the tutorial (http://www.oracle.com/technetwork/developer-tools/adf/learnmore/75-multi-parent-row-detail-views-328078.pdf), page 3.

  I created all things and first of all I had an exception error, which I fixed, but now, whenever I try to select multiple lines, it won't update the table of the adf.

  In this example, I choose a service line and it shows the emplooyes, but every time I try to choose another line by ctrl clicking on it, the employees table be updated.

  Since I tryied to follow the tutorial, I'll put the code for the bean, I created for this purpose (it's a little different than the code given by the tutorial, but only because I had to get rid of the exception error)

  I use jdeveloper Studio Edition Version 12.1.2.0.0.

  Here is my code for the bean.java:

  Select listen port defined for the departments table. The selected line keys are read in the reference table.

  For each line, the Department ID value is read and added to a string buffer that generates a comma-delimited

  List of the departmentIds. In the end, this string is passed as an argument to the link of action ExecuteWithParams

  {} public void onDepartmentTableSelect (SelectionEvent selectionEvent)

  variable to hold the string containing the selected set value line departmentId

  StringBuffer departmentIds = new StringBuffer();

  Go to the main table to read selected line keys

  RicheTableau rt = selectionEvent.getSource ((richeTableau));

  RKS RowKeySet = rt.getSelectedRowKeys ();

  Iterator selectedRowsIterator = rks.iterator ();

  memorize the current line to place it back in the end key

  CurrentRowKey () rt.getRowKey = (list);

  for each selected master line, determine the departmentId

  int size = 0;

  {while (selectedRowsIterator.hasNext ())}

  size ++;

  The rowKey () selectedRowsIterator.next = (list);

  each value is terminated by a comma

  If (departmentIds.length () > 0) {}

  departmentIds.append(",");

  }

  take the current line

  rt.setRowKey (rowKey);

  JUCtrlHierNodeBinding wrappedRow = rt.getRowData ((JUCtrlHierNodeBinding));

  Line rw = wrappedRow.getRow ();

  /*

  Number departmentId = (number) rw.getAttribute ("DepartmentId");

  */

  int departmentIdInt = rw.getAttribute ("DepartmentId") (Integer);

  oracle.jbo.domain.Number departmentId = new oracle.jbo.domain.Number (departmentIdInt);

  departmentIds.append (departmentId.stringValue ());

  }

  back the foreign currency on the line

  rt.setRowKey (currentRowKey);

  Run the query on the detail table

  BindingContext bctx = BindingContext.getCurrent ();

  BindingContainer links = bctx.getCurrentBindingsEntry ();

  OperationBinding executeWithParams = bindings.getOperationBinding("ExecuteWithParams");

  executeWithParams.getParamsMap () .put ("departmentIds", departmentIds.toString ());

  executeWithParams.execute ();

  refresh the detail table

  AdfFacesContext adfFacesContext = AdfFacesContext.getCurrentInstance ();

  adfFacesContext.addPartialTarget (employeeTable);

  }

  }

  If someone has an idea of why it isn't updated table, please answer. Any idea can help.

  Thanks in advance.

  Greetings,

  Frederico Barracha.

  Finally, I found the problem...

  The problem was that I had to remove a line in the properties of my table, the property services: selectedrowkeys, because he only spent the last selected row.

  Yet, I apreciate the help and I had to replace a code in the bean.java, in reason of the exception error and you had to do. Maybe I did a configuration in the wrong way and he would not.

  Thanks for the help.

  Kind regards

  Frederico.

• Action filters IPS event - adding variables in the fields of the aggressor and the victim

  With regard to the Action event filters. How do you add variables multiple events to the aggressor fields and the victim? I use a comma to separate IP addresses (10.10.1.1,192.168.1.1). When I use a variable ($inside) I have not been able to add other variables ($dmz) or IP addresses in the same filter rule. Is it possible to have two variables in the same areas of the aggressor and the victim? I would have thought $inside, $dmz might work, but I get an error. I also tried $inside\, $dmz and $inside, $dmz and $inside \,$dmz but you get errors saying variable system not found.

  What a variable is currently allowed in a field.

  There is an enhancement request to support several variables in a field, but it has not been yet targeted for a specific version.

• Remotely to access the variables of the cRIO

  I have a cRIO-9014 with a cRIO-9114 which is used as a stand-alone system controller (we use several types of modules c I / O and DI/O).  I want to connect a cable ethernet and view select input/output to facilitate tuning PID control.  I am currently using global variables for communication between the host on the PC and the vi rtexe vi.  This works that whent the vi rtexe is launched from the PC.  If I try to launch the host program, while the rtexe is running on the cRIO, when variables deployment stop the rtexe.  If I prevent deployment variables, global variables in the host are not communicating with the cRIO.   Anyone know how to get data in real time of the CRIO without interrupting the program running on the cRIO?

  Thank you!

  If you use variables published shared network and host them on the target (make sure that the library is below the target in the Project Explorer), variables will be deployed when you start the host VI. This way you will not interrupt the program of control over the cRIO.

  See the knowledge base article: How can I deploy a compiled executable shared network Variables? for more information.

  Hope this helps,

• How to install multiple versions of Firefox

  For many years, I use Firefox on multiple versions of Mac OS X.
  For compatibility reasons, I have to keep the last 3.6.28 and I would like to use the latest version.

  Until version 35.0.1 it wasn't a problem at all to have multiple versions installed.
  The problem began with 36.x and remains also with the latest 38.0.

  Problem: all booksmarks disappear when switching between versions. The browser history also disappears.
  How to reproduce the problem:
  I throw the old version 3.x, all booksmarks are there. Then I stop 3.x.
  Then I run the latest version 36.x or 37.x or 38.x and all booksmarks are still there. Then, I'm closing this version.
  Back to 3.x all bookmarks disappeared. In any version of FF.

  I need to recover the Firefox folder in the application to return to the 35.0.1.

  Any help would be really appreciated.

  Best wishes from the Germany,

  Boris

  If you use the time Machine, then you could try to restore files from the backup.

  • http://www.Apple.com/support/TimeMachine/
  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

• Single source for multiple versions

  When compiling for multiple versions, I find myself writing code like this

  #ifdef CURRENT_VERSION_CS5
       #define EVENT Method
       #define HANDLEEVENT HandleMethod
  #else
       #define EVENT Event
       #define HANDLEEVENT HandleEvent
  #endif
  

  and I have to define CURRENT_VERSION_CS5 in project of CS5

  It is based in the sdk sets to the current version?

  #include

  #ifdef kRocketMajorVersionNumberForResource

  #define YOUR_CS_VERSION 5

  #else

  #ifdef kBasilMajorVersionNumberForResource

  #define YOUR_CS_VERSION 4

  #else

  #ifdef kCobaltMajorVersionNumberForResource

  #define YOUR_CS_VERSION 3

  #endif

  #endif

  #endif

  #if YOUR_CS_VERSION > 4
       #define EVENT Method
       #define HANDLEEVENT HandleMethod
  #else
       #define EVENT Event
       #define HANDLEEVENT HandleEvent
  #endif
  

  Voila

  Concerning

  Bartek

• When I try to install firefox again once it is said, the computer must be restarted to complete the uninstall of the previous version, but when restarted and tried again, it says the same thing, what do I do?

  When I try to install firefox again once it is said, the computer must be restarted to complete the uninstall of the previous version, but when restarted and tried again, it says the same thing, what do I do?

  Please try this: copy the files formhistory.sqlite (or formhistory) and places.sqlite (or places) if they exist and remove the entire Mozilla folder in %APPDATA%\protector.exe and also the Firefox folder in Program Files. Please see.

• I left several tabs that Firefox sent the warning prompt. As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs?

  This may sound silly, but once when I was about to leave Firefox, I got the warning prompt if I wanted to close many tabs... As I click on save and leave I pressed accidentally the "save these settings. Now I'm just wondering, how do I disable it, so that Fireox sends the prompt whenever I try to close multiple tabs? I'm under 3.6.6 with OS X Snow Leopard.

  You can reset the preferences to warn on the topic: config page via the context menu.
  browser.tabs.warnOnClose, see http://kb.mozillazine.org/About%3Aconfig_entries
  browser.warnOnQuit, see http://kb.mozillazine.org/browser.warnOnQuit
  browser.warnOnRestart, see http://kb.mozillazine.org/browser.warnOnRestart

  To open the topic: config page, type Subject: config in the address bar (address) and press the Enter key, as you type the url of a Web site to open a Web site.
  If you see a warning then you can confirm that you want to access this page.

  In Firefox 3, you don't get the dialog "Save and exit" pop - up if you choose Firefox > Preferences > General > startup: "When Firefox starts": "show my windows and tabs from last time '.
  Get the dialog "Save and exit" pop - up, to select one of the other options (display my home page, display a blank page).

• Traditional DAQ in multiple versions of the CVI

  I need to support some older programs in our manufacturing space. These programs are written in a few different versions of the CVI, but they also use traditional DAQ. I can't get multiple versions of the CVI to work with Tradtional DAQ.

  I installed CVI 8.1 and then installed the TDAQ. I was able to open one of my projects that was compiled previously in this environment, and everything seems to work properly. I then installed CVI 9.0. Initially, he couldn't find the header for the TDAQ files, then I pointed to the 8.1 CVI include the folder. The project has managed to compile, but it does not link. I was looking for a library to be added to the project, but I couldn't find an obvious tdaq.lib.

  Should what file I add to get this link?

  Note: We need to build in the same environment due to validation rules. If I build a program in the same environment, just to do a small test to make sure that my little change does not adversely affect anything. If I build in a more recent environment, then I need to run a complete verification throughout the application process, which is a tedious process. Management does not like to take the line down for a day or two, while I validate the application of 'new '.

  OK, so I can understand that you now TDAQ installed in CVI9 and not present in cvi8.

  If so, copy the following files from dossier\sous-folder to the corresponding CVI8 one CVI9:

  \bin\ all the files dataacq.* and easyio.*

  EasyIO.lib and \extlib\ dataacq.lib

  \include\ dataacq.h; EasyIO.h; nidaqcns.h; nidaqerr.h; olderror.h; regdefs.h

• I am getting system error 25004 and 1073422306 when I try to download trial versions

  I am getting system error 25004 and 1073422306 when I try to download trial versions

  Hello

  1. do you get this error trying to download or anything when trying to install the trial software?
  2. what software in trial version you are trying to download?
  3. What is the exact error message?
  4. what browser do you use?

  Your question does contain all the required information necessary for us to help you. Please re - write your question, this time make sure you have all the information necessary and we will try to help.
  How to ask a question
  http://support.Microsoft.com/kb/555375