Try to pair with phone mob, arrive at the screen select device then cannot type in the device name.

Similar Questions

• Reset the watch due to the error of access code; now, it won't pair with phone

  Last night the watch worked very well and I put it on the charger. When I took it off the coast, he said the password was wrong and I had to re - activate the password of my phone from Apple. I went to my Apple Phone and tried to do and I got up a pop box saying the Watch has been locked and I had to unlock it.

  I tried to unlock the watch since the phone several times, but he wouldn't let me go beyond the box pop up.  I decided that I had to reset the watch, I went to my phone and selected the option cancel the twinning of the watch from the phone. I thought it was non-paired, I could set up the watch again.

  I did and now my watch is dead.   There is nothing on the watch.  It seems masoned. The watch is ruined?

  Help, please!

  Hello

  Try restarting your watch force: press and hold the side button and the digital Crown for about 10 seconds, until you see the Apple logo, then release them and expect the watch again.

• Unable to pair with phone wireless headset

  I can not pair my xperis with marshall headphones via blootouch... What do I do?
  Thank you

  If your helmet does not at all under the Bluetooth to your phone settings? Were you able to pair your phone with this helmet before? Are you able to pair your phone with other Bluetooth accessories?

• BlackBerry Smartphones pairing with phone in the car

  I'm back once again asking for more help.

  I want to connect my 8700 with the bluetooth on my BMW car.  The phone recognizes the drive but will not pair.  Bmw sites that he should pair with 8700 version 4.1.0.286.  Where can I check the full version on my phone?  I can go as far as 4.1 but no further.  I have associated my Nokia 6233 without problem.

  Thanks Tazmanss

  Yes, I found it and the version is 4.1.0.286 which is the one that is supposed to be compatible.  I ring the BMW hotline for advice.

  Cordially oldwulf

• Mini IPad 2 didn't BT pair with phone g motorcycle

  Matching by Bluetooth mini iPad 2 and Motorola moto g smartphone has failed. The ipad will be displayed as a paired device on the phone, but not vice versa. Is it possible to get this working on the side of the ipad?

  iPad and iPhone can only be combined with Accessories Bluetooth, no other bluetooth devices (and you cannot therefore transfer files via bluetooth). The pairing has failed because it has not been made to work. (this is because of the culture of the closing of the Apple ecosystem Apple).

• When you try to activate by phone, you voice says the number you gave me (ID) is not valid.

  the sticker is no longer legible. When you telephone, you voice says the number you gave me (ID) is not valid. I entered the # repeatedly and even had someone make sure I'm there enter correctly.

  Hi kenw1955,

  You can follow the steps in the link below that relates to a similar question

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-windows_install/Windows-XP-Home-activation-window-fail-to-appear/855fe79d-3f8e-454c-b2ba-83486be5459f

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base.
  How to back up and restore the registry in Windows

  If the problem persists, contact customer support

  How and when to contact Microsoft and support Customer Service

  http://support.Microsoft.com/kb/295539

• Using the trial version of creative cloud. You try to start with Lightroom. I imported the photos that come in Lightroom and are visible for a second and then go black and I am unable to do something more. Is this due to the mode of assessment? Not much o

  It seems that even this part has poor instruction for beginners. I imported the images that are visible for a moment and then go black.

  Hi Tim,

  This problem occurs when the auto tone has been applied to your images.

  For existing photos, select all your images in the grid view, and then click the Reset All button in the quick develop Panel. Then, click the auto tone button to correctly apply this feature.

  To avoid this problem in the future, choose Lightroom > preferences > Presets (Mac OS) or edit > Preferences > Presets (Windows). Select again to apply auto tone adjustments.

  Related link: the pictures are black in Lightroom CC 2015.2/6.2

  Let us know if that helps.

  Kind regards

  ~ Mohit

• My gmail to open automatically when I started Firefox, now I have to sign in each time. Also other sites wb where I try to register a username don't remember the user name either.

  I went into options and set my homepage on the open gmail site but it does not always open when I run firefox

  Have you checked the cookies exceptions?

  You can control and manage permissions for all areas on the Subject: authorizations page via the address bar.

  If you use a software like CCleaner cleaning then check the settings in the Firefox application.

• My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else, and "bicycle wheel" changes all the time! Any suggestions?

  My iPhone6s pairs with ONE single device (phone link2cell). will pair with something else. At the opening of the Bluetooth window "bicycle wheel" next to "Other devices" is always running as if the search! Any suggestions?

  When you open the Bluetooth section in the settings, you can still see the spinning wheel, because it is in discovery mode and is actually looking for other devices in the range. Other devices must be in discovery/torque for the device mode to find them. However, I'm not sure you can be associated with multiple devices at the same time with the iPhone. You can have multiple devices matched on the phone, but you can always not more than one partner at the same time. It depends on what it is you are trying to pair.

• Logitech bluetooth keyboard K480 pair with my Windows 7 computer

  * Original title: Logitech bluetooth keyboard K480

  I have a Logitech bluetooth K480 keyboard won't pair with my computer Windows 7, the devices to show but it does not work with the key board.

  Joe

  Hey Joe,

  Thanks for posting your query in Microsoft Community.

  It can happen because of the conflict of device driver if Windows update tries to install the updated driver for a device that has an updated driver.

  • What is the brand and model of your computer?

  While you reply us with the above information, you can try the following solutions and check if this solves the problem.

  Method 1: Run the corner hardware store and check if it detects problems.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

   

  Method 2: Try to remove and then reinstall the keyboard.

  First, connect a wired keyboard or mouse to your computer. So, if you have Bluetooth wireless technology installed on your computer, follow these steps:

  a. click the Start button, select Control Panel, click hardware and soundand then click on Bluetooth

  Devices.

  b. Select the keyboard or mouse that does not work, and then click Remove.

  c. click Add, press the reset button on the bottom of the keyboard or mouse, check the box my device is set up and ready to be found and then click Next.

  d. If the apparatus does not, repeat the previous step. When the device is found, select it, and then click Next.

  e. If you have tried this step several times, and your computer still cannot find the device, check that the device has fresh batteries.

  f. If the device is a keyboard, exchange of security with the keyboard keys. If the device is a mouse, click don't use a passkey. Follow the remaining instructions in the wizard.

  See also: compatible devices with Bluetooth problems

  Hope that the information provided is useful. If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Cannot match the Z10 to a Linux machine via USB (OS 10.3.1) - ok pairing with wifi

  Hello

  Whenever I run the Device Manager and try to pair with usb I get a "could not connect! Unplugged device or can not be detected. When I connect the usb cable, a new network connection is created in the 169.254.0.X subnet.

  I can pair it correctly using wifi.

  I remember during the pre 10.3 era, there was a 'mac' option that did the trick. I missed something?

  Thank you

  Problem solved.

  For others using NetworkManager, that's what I did:

  1. Open the connection editor and change the connection that corresponds to your BB device.
  2. Go to the IPv4 tab
  3. Method of manual adjustment.
  4. Click Add and the value 169.254.0.2, 255.255.255.0, 169.254.0.1, address, netmask, gateway, respectively.
  5. Click on the routes > Add, and then set it to 169.254.0.1, 255.255.255.0, 169.254.0.1 1 address, netmask, gateway, and metric respectively
  6. Click Ok two times.

• Bluetooth is not pairing with speaker JBL Flip 2

  iMac bluetooth is not pairing with speaker JBL Flip 2. It worked well for 8 months. Yesterday, I paired with my iphone. Now the 2 Flip not will pair again with my mac mini, OS El captain. Bluetooth is activated, now detectable as «Of Deborah Mac mini» JBL Flip 2, not connected devices. I tried to enter the number on the speaker and the pair. Without success. The current number of bluetooth is different from the number of the enclosure. Please tell us how to fix.

  Debbie

  I disconnected the Flip2 and matched. It worked. Thank you.

• Watch is now no paired phone. The watch displays now wrong password, which must be changed on the phone.  However, given that the watch is more matched with the phone, I can't the available option to change the password.  Help please!

  I have a watch that has become not matched with the iPhone with it's Setup.  It is locked with a password and the dial of the watch indicates "Wrong password" and I have to open the App to Apple Watch on my phone to re - activate the entry of access code and try again.  However, the iphone has stated that on the phone became not paired with the watch, so I can't do anything, there is no option to change the password and I can't pair the watch with the phone because it is locked.  This is my boss's phone... Help, please!

  If you have forgotten the password for your Apple Watch - Apple...

  < edited by hosts >

• my phone will pair with my aps command system in the car

  Hi, I just changed my phone from a Samsung Galaxy S5 to a 6 s IPhone more and now my phone will not pair with my system aps command in the car, I have a 2007 Mercedes Benz CLK 280, can anyone help, regards Paul.

  < re-titled by host >

  Hi there paulhewitt,

  I see that you run into some problems when you try to connect your iPhone to your car radio. Here is an article that will provide some troubleshooting for you steps on this subject:

  Get help to connect your iPhone, iPad or iPod touch with your car radio - Apple Support

  https://support.Apple.com/en-us/HT203412

  Thank you for coming to Apple Support communities!

• Tecra M4 crashes afer pairing with Motorola mobile phone

  Try to set up the connection between Motorola Mobile (V545) and follow-up Tosiba Bluetooth help instructions to the letter. Using the Connection Wizard, the mobile pairs with the laptop and accept pairing OK but then fails to generate port / connection modem - the wizard just hangs.

  Later installed Toshiba Stack and all the drivers seem to be there in Device Manager. I made sure Fn + F8 points to Bluetooth and or Bluetooth/WiFi, as have been successfully performed wireless connection between the office and cell phones with Internet connection.

  Any ideas most welcome.

  Check your device manager if you can see any conflict with other devices.