Trying to focus a TextInput field in the header rendering

Similar Questions

• How to manage data and create new textInput fields during the destruction/creation of new views?

  Basically, I need to know how to create another textInput field when I pass data from one view to the other, while recording the data that has been adopted in a first time.

  I want the user to be able to enter text into a textInput on the first view field and see on the next view, BUT I want the following view to record what the user has entered, return to the first view, then take another entry from the user and create another field textInput on the second point of view. It's like a memo pad app. The user enters a task on the first view, then he or she is able to see it on the second point of view. Then, the user must be able to navigate back to the first view and create another task which also goes to the second point of view, but does not replace the first task that was entered. My problem is to create new textInput fields as new data comes in for the second point of view. Any ideas? Perhaps textInput fields are not visual components I should use...
  

  http://d-solve.com/flexas3-global-variables-and-the-singleton/

• Setting the focus on a field without scrolling to it

  Hi all

  Basically, I implement scroll smoothly for is a VerticalFieldManager by subclassing, generating a thread and call setVerticalScroll accordingly... The result is a very nice scrolling.

  However, I also want to control the focus of the fields. However, Field.setFocus () scrolls automatically to this field... that is not what I want.

  How can I set focus to a field without the user interface infrastructure automatically scrolling to it?

  tjerkw wrote:

  I can't replace getVerticalScroll Manager: this is a final method...

  Well I've almost implemented smooth scrolling... but he jumped up and down sometimes because of the blackberry user interface infrastructure...

  Oh yes! I was wondering why I had to create a new getVerticalPosition() - that's why!

  Jumping from high to low is inevitable since these invokeLater arrive at unpredictable times.  Be sure to keep the overall pace and it will be good enough.

  Another word of warning: If you make your scroll of in a TimerTask, don't forget to cancel it when your manager scrolls smoothly becomes obscured and set one new another appointment when necessary.  If you leave it running (for example, runs at 20 Hz or so, looking for the last event not transformed), if will drain the battery like crazy...

• reset the textInput field

  Hello
  
  I create a data entry with two screens.you application can enter name textInput field in the first screen and second appears on the screen
  a button ' save following "and the application go to the one screen when you click the button, then you can add the next new record.
  
  My question is that the textInput field have always given to the last time, when I go to the screen the next time. I hope that the textInput field is empty when I enter the first screen, the second screen. Please let me know how to proceed. Thank you
  
  my code is here:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" >
  < mx: states >
  < name mx: State = 'results' >
  < mx:RemoveChild target = "{nameInput}" / >
  < mx:SetProperty target = '{label1}' name = value 'x' = '129' / >
  < mx:SetProperty target = "{label1}" name = value "y" = "62" / >
  < mx:SetProperty target = "{label1}" name = "text" value = "data is saved" / >
  < mx:SetProperty target = "{label1}" name = "width" value = "130" / >
  < mx:SetProperty target = "{button1}" name = 'label' value = "Next record entry" / >
  < mx:SetProperty target = "{button1}" name = "width" value = "177" / >
  < mx:SetEventHandler target = "{button1}" name = "click on" Manager = "currentState =" "/ >
  < / mx: State >
  < / mx: states >
  < mx:Label = "98" x = "67" text = "" name: "width ="61"id ="label1"/ >"
  < mx:TextInput = "167" x = "65" id = "nameInput" / >
  < mx:Button = "129" x = "118" label = "Save" id = "button1" width = "170" click = "currentState = 'results'" / >
  
  < / mx:Application >

  In the code below, I have changed the SetEventHandler:

  
  http://www.Adobe.com/2006/mxml"layout ="absolute">
  
  
  
  
  
  
  
  
  
  
  
  
  
  
  

• How to style a TextInput field

  I want to create a TextInput field without border, but cannot do without a border of 1 pixel on 3 sides. How can I remove the grey border on the TextInput field on the code below?
  Thank you.
  
  <? XML version = "1.0" encoding = "utf-8"? >
  < mx:Application backgroundColor = "0x000000".
  ' xmlns:MX =' http://www.adobe.com/2006/mxml ' layout = "absolute" >
  < mx:HBox = "92" x y = "311" width = "100%" >
  < mx:VBox height = "100%" >
  < mx:TextInput id = "Name1" text = "myText".
  Color = "0xffffff".
  backgroundColor = '0 x 222222 '.
  borderColor = "0 x 222222" / >
  < / mx:VBox >
  < / mx:HBox >
  < / mx:Application >

  I've never tried it myself, but you may need to create a skin. But first try this: borderStyle = "none" (or borderStyle: none in the CSS).

• How to disable the warning of validation on the calculation (read-only) field in the table

  Is it possible to add a line in a calculation script (JavaScript) that prevents a dialog box of a calculation field validation?

  Scenario:

  • Working with fields in a table inserted.
  • In each line, I have a couple of fields that the user has entered. These fields have a Validation model has allowed that the user must enter the data correctly.
  • There is a calculated field based on the data entered by the users. It is this field that throws a warning dialog box "the value entered for Total_Row1 is not valid. "To ignore the validations for Total_Row1, click on ignore.

  Even if I turn off the Model Validation on fields used for the calculation of the warning dialog box always appears. So, it seems to be isolated in the field of computing.

  The calculation area displays the time and I got it originally set as a Date/time field, but also tried to use a text field (as the calculation should appear as 0:45 for 45 minutes in this area).

  I have a suspicion that the warning appears only because I used an array for formatting fields, as I used similar validation profiles and other calculation fields and see not the message when the fields do not appear inside the table.

  I think of easier workaround would be to disable validation for this particular calculation field, but I have no idea how the script that. Any help appreciated lot.

  CARI

  I discovered the problem.  In a word: it was a mistake by naming the fields.

  • I have fields named with line numbers in the field name (for example FieldName_Row1).
  • and fields calls with FieldName_Row1.formattedVallue must have triggered some confusion.

  As soon as I removed the word 'Row' of file names, the question of the warning dialog validation mystery Adobe Acrobat for the calculation field have disappeared.

  Ago about 3-4 hours of my life that I won't be back... ha - ha but if someone else has the problem, I thought I better share my discoveries

• How to use comboBox as key to display several textInput fields?

  All,

  I am new to Flex and you have to help!

  I have selected lines of database and to display on a comboBox with multiple textInput fields. The need for the function of

  (1) after the full page load, the drop-down list display the ID (unique key of the line).

  and all fields must fill the columns with the ID. (I did it with only a textInput)

  (2) when he selects an ID in the comboBox, all fields with the ID must change accordingly.

  See the attached file.

  Help, please.

  Thank you in advance!

  Hello

  It is an example. You should receive your data and

  http://www.Adobe.com/2006/mxml"layout ="absolute">

  EMB09

  Albert Einstein College of Med

  Bronx comm Center

  30 s

  New York City

  NY

  10471

  EMB10

  Albert Einstein College of Med

  Red Lobster Bronx

  102

  New York City

  NY

  10463

  YUD09

  Yeshiva University

  Chelsea Piers Pier Sixty

  103

  0

  0

  0

  0

  New York City

  NY

  10033

  0

• To display the header field on each page

  Hi all
  
  I have a BI report, my rich TEXT contains the sequence of areas such as
  
  Part of the header:
  ----------------------
  Invoice_number: 101
  Bill:
  ship to:
  ......
  
  
  Part of detail:
  
  ABC, DEF, GFE... COLUMNS for this Invoice_number
  1 2 3
  5 6 7
  ----------------
  
  So my block of retail is coming in two pages with data, so my requirement is for in my subsequent pages for this invoice number, I need to print "Invoice_number: 101 ' on the ground every time.
  
  Means suppose for the Bill 101, I'm gettinf detail data in the two pages so in my second top of page, I need to print the "Invoice_number: 101" field of the header as well as the data.please help me on this
  
  Thank you

  use for each section and header section or the setting you want to repeat for each use of the page as template inline void.

  as below

  for each section
  
  Header table
  

  and to call this header section in your header template to help place

  then you will get a header on all pages.

  Otherwise, send me your model and xml I can try at my side. Email:[email protected]

• Repeat the field values by repeating the header (flowed subform)

  I have a request form which consists of three main sections - a header, a table of details, and a footer.

  The Details table must be able to expand to fit, which means that the form should be able to escape on a second page. All the fields in the header must repeat on the second page. The footer should only appear once, at the bottom of the table of details, not repeated on each page.

  After much tinkering with flowed and positioned subforms, I've got this work with the Details table inside a subform sank, with a subform positioned in the lines of header and footer in the table. I suspect that this is not the 'proper' way, but it's the only way I could make it work.

  So my head joyfully repeats on the second page, but the values typed in the first page header fields do not appear on the second page. The user must be able to change the header on any page and all pages update headers.

  Can someone please point me to a tutorial or give me an idea of what code would accomplish this? I don't know how to reference the field repeated to set its value.

  If I do it is crazy, and there is a better way, it would be good to know too. I use es2

  Set the binding for the fields in the header 'Use of global data' - on the binding of the object palette tab.

• How to put the form fields (items) to the header level

  Hi all
  
  I have a requirement in which i need to display a few fields on each page of the report as a header, it's like
  
  Page 1 of 4
  
  column name ColDate
  
  
  Other fields in page 1
  
  
  Page 2 of 4
  
  column name ColDate
  
  
  Other fields on the page 2
  
  so, how can I manage display the name column and field ColDate on every page. Any advice would be very helpful.
  
  Thanks in advance.
  
  Thank you
  Pratap

  You can not form fields in the header/footer section. You must place the actual tag there as

• Is there a way to remove the header (office) completely?

  Hello

  The layout Azure_Blue Robohelp 2015 provides works perfectly in my case, except the header. The generated content will be incorporated into a web portal that already has a heading of its own. I can do the background, the police and white logo - making the header 'invisible '. But the empty space still seems too clumsy. In addition, the sidebar already has a search function, then the search field in the header is not necessary. Any help would be appreciated! Thank you.

  

  W

  The CSS uses positioning to set the header and content. So when removing the header, you will also need to correct the positioning.

  1. Download the source SCSS files: layouts and RoboHelp screen profiles
  2. Open the Azure_Blue\Layout.scss file in Notepad ++ or any editor of your choice
  3. On line 1371, set the variable $heading - height - Office to 0em. This will fix all the calculations of the height in the SCSS to ensure everything is well positioned now.
  4. Online 1427, add display: none! important;
  5. Online 1628, add display: none! important;

  Save the file and generate the CSS file with a compiler SCSS like Koala. Add the CSS to your provision of the screen and you should be good to go.

• [Solved] How to change the header and footer height?

  Oh shit, that was fast! x)...

  I just got 2 see the leaders

  THX cu
  

  
  

  
  

  ____________________

  
  

  I tried to go to
  

  View > Display the header and footer

  and all the selected options, but nothing has changed.

  
  

  I know I need to move those:
  

  

  .. but here's a screenshot of what is displayed on my computer:

  

  You can see (if you're not blind) that there is no option to drag.

  How to make appear? I googled a lot, but found nothing.

  Thank you

  Chris

  Hi Chris,

  Go to the views-> click on "display rules". That should bring.

  Let me know if you have any question.

• How can we use IF ELSE statement in the header Section

  Hi all
  
  I have obligation to indicate an address of invoice in the header section based on a special status, some body please share it is is it possible to use if elsewhere in the header section.
  
  
  Thanks in advance
  
  Thank you
  Pratap

  You can't place your if conditions inside the form fields in the header in Word. But you can directly type the tags in place.

  Concerning
  Charlotte

• How to focus the TextInput field

  Hello

  How to focus with the TextInput field. I tried with userIDTxtIt.setFocus ();  The update is available for text entry. but when I enter the TextInput field value as "Through", the keyboard is not available here. so I tried with userIDTxtIt.dispatchEvent (new MouseEvent (MouseEvent.DOUBLE_CLICK));

  key board still focus is not available for text entry.

  Kind regards

  Thiru

  I see, this is a browser security restriction that prevents the flash drive

  get it straight, you might overcome only by using javascript.

• RemoteObject result to display in the TextInput field

  Hi all. I get a record result a value returned by a call to RemoteObject to a CFC. No problem. I then put that into an ArrayCollection collection. Then, I want to display the fields in a form with TextInput fields. I can't find any documentation on the way out the fields.
  
  The returned fields are ID, number ticket, title, URL, etc. Again, only 1 ticket is returned in the query.
  
  I tried:
  
  < mx:TextInput id = text = "{AltirisDetailsResultArray.TicketNumber}" / "txtinputTicketNumber" >
  
  But I get an error when compiling:
  1119: access of property may be undefined number ticket through a reference with static type mx.collections:ArrayCollection.
  
  I tried many ways, but nothing works.
  
  Thank you, all.
  
  

  Jeff, thanks for the help. Actually, I figured it out before check you in here once again and had just published my dose. It was right in front of me, so I knew what to look for.

  I just need to tell him where, in the arraycollection collection to get the field.

  MAGIC!

  Thank you, however, I'll be back.