Repeat the field values by repeating the header (flowed subform)

Similar Questions

• Repeat the header in the xml editor

  Dear Experts,

  I have a model where I need to repeat the header information of the next page, I tried with <? beginning: body? > <?: body end? > and in the property of the table, I check the Repeat property as a header and I tried <? for-each@section:Group_Name? >. but it does not work.

  His task.your emergency assistance is much appreciated.

  Could you please help me on this.

  Best regards

  Amar

  Hi Amar,

  It's almost over. Now, the first lines of the 3 table are repeated on several pages.

  Please find attached the output model and example.

  You need to spend some effort on the formatting of the table if necessary (probably rebuild the base tables that I see some formatting issues already exists on your model)

  But it's the approach that you can follow to meet the needs of your business.

  Thank you...

• DW5.5 - the header background image partially repeats in Safari and IE

  I have a header banner is a background image with the type of navigation above the image, published at http://www.saarts.com.au/designyo

  The banner is displayed correctly in Firefox, but in Safari and IE the 10px up (approximately) of the header image that repeats only once directly under the header bar.

  Clues?  Thank you.

  It's because of top padding on the table cell

  {.topnavigationtext}
  color: #CCCCCC;

  do-size: 10pt;

  padding-right: 10px;

  padding-top: 22px;

  }

  Remove and the cell of the table shrinks in height and repeating BG image disappears.

• RTF model - repeat the header in

  Hi Experts,
  I am facing a weird problem where, in a particular model, the first part of the heading text should be repeated as part of the report, and then a table header should not repeat that in the case of folders under it. Could you pls help me?
  
  Thank you
  Swarna

  Did you send the updated files.

• Repeat the header information of level in all pages

  Hi friends,
  
  I am developing a RICH model for a kind of Oracle IN report.
  If the elements of the line extends to the next page, the header information should now shown on the next page as well.
  
  I am facing problems repeating the level header information in all pages.
  I put the table header property to repeat on all pages. Still I don't see the header on the next page.
  This is what I use in the header tag group:
  <? for-each-group: G_VEHICLE; / VEHICLE_NUMBER? > <? sorting: current-group () / VEHICLE_NUMBER; ' ascending '; data-type = "text"? >
  
  Can anyone help on this please.
  
  See you soon,.
  Krish

  Hi Krish,

  I sent you the updated model according to your last thread. Please take a look.

  Thank you!

• Report of the IR - repeat the header problem

  Reports of the IR - Apex 3.2
  
  Question: Is there way to keep the main header of column in Table identical to reiterate the position. I spent a lot of time coloring the column header cell < blue > and they do not lack down to repeat headers... I tried many ways. Thank you in advance.
  
  
  < style type = "text/css" >
  .apexir_WORKSHEET_DATA th {background: #8A7E3F}
  text-decoration: none;
  cursor: pointer;
  
  #apexir_WORKSHEET .apexir_REPEAT_HEADING {background: #8A7E3F}
  
  #apexir_EAC_CMDB_PLT {color: "#00FF00"; text-decoration: none;}
  cursor: pointer ;}
  < / style >

  Hello

  Sorry, I see now what you're trying to do - I've updated my styles to use #apexir_ENAME {color: #0000FF; text-decoration: none; cursor: point;}, then set groups. Only the first title "Ename" is a style using this. That's because it's the only one who is given an ID of "apexir_ENAME" - other group headers are all simple DIVs without identifiers.

  The only way I managed to get a style on all of this is to add a SPAN tag in the position itself and style it like that. While this does not, of course, this does not mean that the definition of the SCOPE is now part of the header text appears so when you use "Select columns" etc.

  I can't imagine a way easy around what I assume that IDS are important for the IR feature and must be unique within the page.

  Andy

• Repeat the header on each page

  Hello
  
  I have a problem to repeat the header on each page.
  
  I tried to use the following options through the other threads on this topic. But it did not work.
  
  1. in the properties of the table, repeat the line header at the top of each page
  2. header information <? Start body? > body <? end body? > footer
  
  Please help me...
  
  Thank you
  Shashi

  Hey Shashi,

  I sent you the modified model.

  Let me know if it works :)

  It will be ;) I tested it

• To display the header field on each page

  Hi all
  
  I have a BI report, my rich TEXT contains the sequence of areas such as
  
  Part of the header:
  ----------------------
  Invoice_number: 101
  Bill:
  ship to:
  ......
  
  
  Part of detail:
  
  ABC, DEF, GFE... COLUMNS for this Invoice_number
  1 2 3
  5 6 7
  ----------------
  
  So my block of retail is coming in two pages with data, so my requirement is for in my subsequent pages for this invoice number, I need to print "Invoice_number: 101 ' on the ground every time.
  
  Means suppose for the Bill 101, I'm gettinf detail data in the two pages so in my second top of page, I need to print the "Invoice_number: 101" field of the header as well as the data.please help me on this
  
  Thank you

  use for each section and header section or the setting you want to repeat for each use of the page as template inline void.

  as below

  for each section
  
  Header table
  

  and to call this header section in your header template to help place

  then you will get a header on all pages.

  Otherwise, send me your model and xml I can try at my side. Email:[email protected]

• How to check the existence of field in a chain at the level of the header?

  Hello

  
  I have a bunch of fields on my_form, just for example here in this announcement I'm on U.S. State names, say for example.

  I have 3 domains, their names are as below

  1) NY,

  2) CA,

  (3) TX

  I placed a hidden his name, a text field is FGL (I mean, the gray field list), uses this GFL for my purpose of programming

  Since the back-end (in our case, its an ERP - SAP) am filling/filling this field GFL, say for example... its data looks like, CA TX (I mean, am concatenating the names of State with a separation of a space)

  (FYI... I already have some piece of JS in my_form INITIALIZATION and for certain other purposes docReady event)

  Now my requirement is as below,

   

  (1) LOOP all objects domain (here they are like state names) of my_form, then check if their name (NY) existing data of GFL... If exisitng (in our case, its not existing) pls shaded with readOnly... If not existing

  (in our case, its not existing) pass the coloring and readOnly, go to the next loop / iteration / state / field

  Actually, I can achieve my requirement by putting the JS in initialization event each object field as mmee below, (but I have about 200 fields in my_form, that's why I want to put all the field objects of my_form in one piece of code at the level of the header in a generic way in loop),

  var myStateName = / NY /;
  

  var returnValue = GFL.search (myStateName);
  

  If (returnValue! = - 1) {;} / / This state/field/object is found in the list of fields of gray, so dimmed with readOnly
  

  this.ui.oneOfChild.border.fill.color.value = "192,192,192."
  

  This.Access = "readOnly";

  
  };

  For certain other requirements, one of the experts provided below JS in these forums, as below

  function findNodes (vNode) {}

  If (vNode.className = 'field') {}

  If (vNode.isPropertySpecified ("name") = true) {}

  If (.search(/_U$/g) vNode.getAttribute ('name')! ==-1) {}

  / / Script to run, when a match is found

  ...

  }

  }

  }

  for (var i = 0; i < vNode.nodes.length; i += 1) {}

  findNodes (vNode.nodes.item (i));

  }

  }

  findNodes (xfa.form);

  In fact, I tried to change the JS above according to my needs, but its does not work, please provide me with the correct JS according to my requirement.

  Thank you

  Try this:

  function findNodes (vNode) {}

  If (vNode.className = 'field') {}

  If (vNode.isPropertySpecified ("name") = true) {}

  var myStateName = new RegExp (vNode.name);

  var returnValue = GFL.search (myStateName);

  If (returnValue! =-1) {}

  this.ui.oneOfChild.border.fill.color.value = "192,192,192";

  This.Access = "ReadOnly";

  }

  else {}

  this.ui.oneOfChild.border.fill.color.value="255,255,255";//whatever color is free access

  This.Access = "Open";

  }

  }

  }

  for (var a = 0;<>

  findNodes (vNode.nodes.item (a));

  }

  }

  findNodes (xfa.form);

  Kyle

• How to put an xml element in the header field?

  Hello friends,
  My requirement is like I have a particular item that should be printed on the header filed
  for ex - dept_no and dept_name in header field... Please let me know how...
  Thank you

  Use for-each@section:DEPT_GROUP
  and place the field directly in the header section.

  This would ensure that the dept value is reset for each group.

• Preserve the header and footer in the text field flowing through a page

  Hello

  I am creating a form, where the main text field Pounces on the next page (that I go to do). I created two master pages, the first page and the page of continuation. I want the field of main text to expand on the continuation page, while preserving the footer of the main page and the header/footer of the continuation pages. On the continuation page, I have a field name at the top of the page, I want to whether the value of the same text box of the home page, how to achieve this.

  The layout must remain what it 'looks like' on both master pages, I want to just be written in the main area on the first page to continue in the main area of the second page of the text. I want the second page to reproduce as many times as necessary to adapt the text.

  Help! PLEASE, I BEG YOU!

  I have attached my work so far, please do not hesitate to pick up ragged and make it work!

  Gareth

  For 1 issue, you can simply set the binding of this field worldwide and all fields will have the same value. Click on the object and in the object palette, there is a tab link. In the set default binding change None to Global.

  For the 2nd problem, you have a Pg1 field called numberOfPages. This field is used in conjunction with another domain on the master Page2. He shodul not be located on this page. I removed it, then I was able to resize the titleForm subform to fit the space.

  Paul

• Trying to focus a TextInput field in the header rendering

  Hello

  I have an AdvancedDatagrid and a button that, when clicked, adds a new column at the end of the datagrid.  I have a t괥 record in these new columns that contains a TextInput.  Everything works fine, except I can't get TextInput in the rendering of the header to be automatically developed after the column is added.

  Right after the click on the "Add column" button, I want the user to be able to start typing in the header without having to click on it with the mouse, but it does not work.  The cursor is not in the TextInput.  However, if I start typing (you don't see anything happening), I confirmed that the value of the field actually takes the characters as I type.  Very weird.

  I tried everything I can think of.  I tried setting the focus with callLater in diferent event handlers, validateNow(), etc..

  A clue-

  The focus won't work correctly once I added enough columns that they leave the edge of the frame and the horizontal scroll bar appears and scrolls on.

  < mx:headerRenderer >

  < mx:Component >

  < mx:VBox horizontalScrollPolicy = "off" verticalScrollPolicy = "off" >

  < mx:TextInput

  Width = '100% '.

  ID = "headerInput".

  creationComplete = "headerInput.setFocus (); »

  / >

  < / mx:VBox >

  < / mx:Component >

  < / mx:headerRenderer >

  public void addCol (): void

      {

  var col: MyCustomCol = new MyCustomCol();

  var cols: Array = this.grid.columns;

      cols.push(col);

  this.grid.columns = cols;

  this.grid.validateNow ();

  / / Scroll the horizontal bar on the right edge to check the newly added column is visible

  grid.horizontalScrollPosition = (grid.columns.length - 1);

      }              

  Any ideas?

  Thank you

  sale tag following script in your custom header renderer and you are made, as well you can remove redundant creationcomplete setFocus.

  
   
  override protected function updateDisplayList(unscaledWidth:Number,_unscaledHeight:Number):void {}
  super.updateDisplayList (unscaledWidth, unscaledHeight);

  headerInput.setFocus ();
  }
   
  ]]>
  

  If you think this message responds to your question or assistance, please mark respectively

• Referring to field values in the position of the region

  Is there a simple way to designate more than one field value in a position in the region? I added the ' & P1_YEAR.' at the end of a region name and it will show the contents of this field in the header.
  
  How can you show more than one classified section. For example, if you wanted to add 'Year' and 'Model' under the heading 'Vehicle' so that it displays
  
  "The vehicles Ford 2008'
  
  
  Kind regards
  
  Steve Welch

  Steve:

  You can simply concatenate the fields for which you want the displayed values

  & P1_YEAR. & P1_MODEL.

  CITY

• How to find duplicates of a field value? For example - in a field, I have values like {123,345,346,123}, now I want to remove the duplicate value in the field so that my output looks like {123,345,346}

  How to find duplicates of a field value? For example - in a field, I have values like {123,345,346,123}, now I want to remove the duplicate value in the field so that my output looks like {123,345,346}

  If it's an array you want to deduplicate then here is a script [for use in the Script Processor] I prepared earlier:

  var result = new Array();

  var added = new Object();

  If (input1 [0]! = null)

  {

  for (var i = 0; i)< input1[0].length;="">

  {

  var point = input1 [0] [i];

  If (! added [item])

  {

  added [item] = 1;

  result [result. Length] = item;

  }

  }

  }

  Output 1 = result;

  Kind regards

  Nick

• Can we define a field value of contact with the CRM campaign settings ID campaign?

  Hello

  Can we define a field value of contact with the ID of CRM campaign?

  For example: LAST campaign SFDC ID (field of contact) = CRM campaign (campaign) No.

  The Eloqua campaign canvas has the possibility to update CRM directly with the status of the campaign on things like email send or clicks. IF you set these shares to be among the rules of the answer, then as they happen, they will create/update records of campaign in CRM directly responses. However, this will have an impact on information in Eloqua.