Turn each

Similar Questions

• T2300 autocad 2013 turns each drawing

  happens that tracing with autocad.   No matter what setting I try each parcel out horizontal on a 36 x 36 print not a parcel of landscape 24 x 36.  If I open a PDF file and print from the window of the driver prints correctly.

  Hi mjurv62,

  I'm sorry, but to get your question more exposure I suggest posting in the trade forums since it is a commercial product. You can do so at http://h30499.www3.hp.com/hpeb/.

  I hope this helps!

• Why my photos are shot on the side? I use windows live photo gallery - they don't not used to be, I have to manually turn each of them to get them straightened out

  my photos are all on the side, they were not always this way, I have changed a setting in some way, but don't know how or what - thank you - at the same time, the records now have a blue box with a white arrow - what have I done to cause this?

  Hi brt3456,

  The question you posted would be better suited to Windows Live Solution Center. I suggest you to send your application in the Windows Live Solution Center for better support.

  http://www.windowslivehelp.com/product.aspx?ProductID=20

  For reference:

  http://www.windowslivehelp.com/

• Iconia A110 - turn vibrate off the coast?

  I went through all the settings I can think and have turned each evolves in the silence and save again and can't turn off the vibrator for notifications feature. Is this possible and if so, HOW? lol also, though less boring, is there a way to turn the vibrate function when you press the keys (specifically the keyboard it seems) off as well?

  Info or ideas appreciated!

  I found the settings for the keyboard to another post, and it seems to have turned off the vibrator for the rest feature too! Thus, in the case everyone must:

  Settings > language and input > tap the settings next to your keyboard selected (mine is by default in Google English keyboard). Now I turned off vibrate on Keypress, Sound on keypress, block offensive words and activate the tapping gesture so anyones guess as to who he turned off heh

• How to divide a circle and the fill color for each individual segment

  I know that sounds easy, sorry I'm pretty new to illustrator.

  I need to divide a circle into 7 sections and then fill each of them individually. I tried the polar grid tool to divide the circle, but I couldn't turn each segment into distinct sections that I could color individually.

  The cirlce does not break upward into segments but creates a number of paths, the outline of the circle is a unique path.

  Does anyone know a quick solution to this? Am approaching this the wrong way? Any help would be GREATLY appreciated.

  Thanks for your time,

  Tony

  You can use the live paint after split.

  are you lookin for?

• Firefox knows several accidents since installation of Webroot AV package need any info on the crash can get to try to isolate and resolve this

  Accidents that occurred at several sites and even occurred when you connect on the browser on 3 or 4 occasions. More frequently so involved in the loading or reloading flash games. Disabled various functions in the AV, cannot be isolated from anything. Here as much information as possible about what is causing crashes then may be disclosed to the webroot for possible resolution
  Any help greatly appreciated
  Here are the last 5 IDs, have a large list, several have been submitted
  with comments about this issue

  Solution:
  Test continued the 20
  As indicated in previous entry
  crashes with all the below to note the values of Configuration FF the value 'True '.

  DOM. IPC.plugins.Enabled
  DOM. IPC.plugins.Enabled.npctrl.dll (microsoft Silverlight)
  DOM. IPC.plugins.Enabled.npqtplugin.dll (Apple Quicktime)
  DOM. IPC.plugins.Enabled.npswf32.dll (Adobe Flash)
  DOM. IPC.plugins.Enabled.nptest.dll (NPAPI Test Plugin)
  DOM. IPC.plugins.java.Enabled (Java)

  With these is set to false and WSA on, Firefox crashes occurred randomly in various
  situations in surf and play.
  Crash with WSA not disabled.

  The value of these values are all true, then no crashes the browser.

  Breakdowns:
  All the fake worms, checked once again, WSA, Firefox crashed, with WSA
  offshore, no crashes

  Started with Java and worked at bottom upwards by turning each and stable
  with WSA rekindled.
  Crashes stopped occurring when the plugin Quick time has been set to true.

  'Cultivable fix to this problem, the user: the configuration above to all true values
  
  (Best bet to be a problem that does not occur, with quite true I rebooted)
  during the game play hundreds of times without accident)"
  

  Looks like there is some kind of conflict between plugin Quick time and the
  WSA, which should be resolved by Webroot if possible.

• Satellite C660-1MP - boring of cooling fan

  Owning a laptop Toshiba C660-1MP.

  My problem is the fan that turns each letter 10 - 15 on and turns off.
  This does not carry in areas where it is quiet

  Unfortunately, you're not the first person who wrote about this. If you have some time I recommend you to consult the offers of other similar in this regard. You will find tips and advice very useful.

  As a first step I recommend to change cooling fan method option. You can do if you open the power options advanced in the power plan that you use and you can find it in Toshiba power saver.

  Set fan to optimized cooling battery option.

  You may notice a few changes?

• digital output usb6009 does not switch does not correctly

  Hello

  I have a little problem with my 6009.

  Basically, I switch the inputs of a Demux (74HC238D) (3 lines) write an address on it to select rows of data off the Demux.

  The signal from the acquisition of data through an FPGA and the signal is displayed on the input pins Demux.  That is the problem.

  (It is worth noting that the FPGA is well programmed (coz if it was'nt then the signal would not get the demux in the first place.))

  When I connect the inputs of the FPGA to 3 digital lines of data acquisition and scroll lines (turning each one WE and OFF), the signal appearing at the Demux pins is not a proper logic level. (the voltage I measured the scope is about. less than 1.1 V). For this reason I choose any line, Demux output will always be on the first channel and will not select the other channel.

  I tried the same test 7 connect supply of 5V data acquisition (each line) and after having programmed the FPGA, the correct voltage level is available on the DEMUX pins. The problem occurs when I try to scroll through the entries via the software.

  I'm not which is the cause. My belief is the acquisition of data.

  What are your suggestions?

  Thank you

  Labmat

  Hi Labmat,

  The first thing that jumps out to me is the fact that you use these signals to interface with an FPGA. Outputs digital USB-6009 are 5V or 3.3V TTL and commonly FPGA i/o is 3.3V. Just to double-check, as FPGA did you use?

  Q: When I connect the inputs of the FPGA to 3 digital lines of data acquisition and scroll lines (turning each one WE and OFF), the signal appearing at the Demux pins is not a proper logic level. (the voltage I measured the scope is about. less than 1.1 V). I tried the same test 7 connect supply of 5V data acquisition (each line) and after having programmed the FPGA, the correct voltage level is available on the DEMUX pins. The problem occurs when I try to scroll through the entries via the software.

  A:  This no doubt hits the nail on the head. First of all, I'd be inclined to not use program any software directly and instead use some of the tools for debugging I/O connectivity that come with the Driver NOR-DAQmx. You can get these from the measurement and Automation Explorer (MAX).

  ' ' ' ' 'Start-up' all programs ' National Instruments ' measurement and automation.

  Expand the tree of devices and Interfaces in the left pane, and then select your USB-6009. Using the Test panels button on the right pane, you can quickly perform digital i/o with the device.

  Our best bet is to first take a multimeter and see if we can measure the correct voltage is distributed by the correct pins on the USB-6009 case.

  Now, by checking the box USB-6009 Datasheet, we can see that, on Page 17, there are a couple of different ways that we can configure the method by which the output signal is driven out of the unit; We have Drive open and active collector mode. It will assure you that since you are trying to send a signal to the FPGA, the unit must be set to active training mode, in order to generate signals from 0V to 3.3V . Output open collector allows the generation of signals from 0V to 5V . This can be done through property OR DAQmx nodes in LabVIEW.

  In terms of current...

  The + 5V line that you used for the FPGA Nailer is evaluated to 200 my. General DIO lines on the USB-6009 case can generate a current up to 8.5mA. This limitation fits the specifications of digital input of your FPGA?

• 2-axis... 1 switch House? Find reference

  I use a card of e/s NOR-7330 movement, to which it is a Council of I/O UMI 7764 motion. This card is used for the stepper motors closed loop. Currently, I am trying to write a VI that, for each axis, turn each screw lead until running personalties on the screw in the switch to home and once they make the position can be reset to a value of knowledge, basically reseting this House switch in a position of reference / reference. The goal is to get away with just using 1 switch House, for 2 axes, is it still possible? Is it safe to do, or help would be rear limits and a House move work better?

  I ran the find reference VI with little luck. This will simply an axis until it hits the home button, but immediately running the engine in reverse. What I read I suppose it's considered the race before or back, instead of a switch at home? IM assuming that something in my MAX settings is incorrect, and I was hoping that someone with more knowledge would be useful. It would be great if I could run 1 axis to the switch House assign to a relative position of the switch House, then do the same for axis 2.

  Thank you

  Almost any Max setting may be overriddin in LabVIEW.  You have a lag move together, that's why your axis moves after finding the switch house edge.  I disable the switch House to the MAX and then use Smart turn in reference to find parameters.  Do not have one a motion compensation or reset in MAX position.  Use the reference find VI, then when that VI is complete, you can make a move of compensation and/or reset the position using LabVIEW.

• How to rotate a group of objects in 3d photo

  There are examples on how to rotate an object independently as the solar system.  However, I am having a challenge that I created one side of the rubik's cube that has several small cubes in ti and want to rotate just a row of small cubes on the face. Does anyone know how to rotate several objects around a unique turning point in a 3D picture control? See the photo below.

  http://www.Google.com/imgres?num=10&hl=en&BIW=1131&BiH=475&TBM=isch&tbnid=h8yi5Gx0qZzhwM: & imgrefurl =...

  Thanks Matt.  This is a great example of how to rotate an object unique in several ways.  I appreciate your response, as it reminds me more.

  My challenge is to be able to turn several cubes all at the same time, but as a face, not all of the same angle.  So, I guess I have to take a point in the axis to rotate the object around and then have ach one turn at a different angle in order to keep the flat face.

  I don't know how to rotate a cube around a point that is disabled in the cube in a scene. This is a JPEG of my challenge.  I want to turn each plate of cubes of a user control.

• Reset to the values in table

  I built a VI which I think must initialize an array of bool 8 element to all WRONG. Then at each iteration of the for loop, it is, should turn each element increasing to TRUE. But in each iteration of the loop, the item previous returns false instead of stay TRUE. Why is this, and what logic is necessary to avoid this problem?

  dourk wrote:

  I added the shift register, and if I run it without the DAQ help, it works perfectly, thank you!

  You must use "replace table subset", "do not insert in the table". You will also need to initialize the array with 8 elements.

  ("insert into array" will grow the array by one element each time you insert one, move everything higher up. After two iterations, the table will have 9 items. However, 'replace table subset' will keep the table the same size, by changing the value of an element by a new value)

• tab control event link

  I'm working on a program which requires me to bind two different tab controls.  I tried to implement a case of the event, but I don't know how to get it to link page 1 control 1 to page control 1 2, page 2 of control 1 control 2 2 page, etc...  Any help would be greatly appreciated.

  I would recommend a local variable rather than the value property node.

  Of course I do not understand why you do not just use a single tab control that is twice as wide, for example?

  What is the idea behind a code extra stuff?

  In addition, you could do a tab control the master and turn each other into an indicator. This way one can be used, but the other will always follow if they are wired together and placed in an event of value has changed. (Hide the tabs on the second).

• Moment of the digital output

  I use a PCI-MIO-16-1, and I'm trying to create pulses on each of the three digital outputs, using a hardware trigger.  I got a solution that sort of market by using a loop timed; the loop runs once per trigger, and inside the loop, I use avoiding to turn each of the three outputs at the right time.

  However, the problem is that the 1ms resolution of the timing of software is not good enough.  So I try to find a way to do it using equipment, so I can get a finer resolution.

  What I tried to do recently is to create a redeclenchables on one of the counters pulse train (using the example generate digital Pulse Train-finishes-redeclenchables) and use it as a trigger for the timed loop.  I can get the pulse train to give me three ticks for every time that I get a hardware trigger and then put a state machine inside the loop to turn each of the outputs.  (I am currently divide the material into three equal segments trigger.)

  However, although I can generate the pulse train very well on one of the counters, I can't manage to get the timed loop to use this counter as its source of the moment.  How can I do?  Or does anyone have a better idea how to do that?

  Unfortunately, the card you have does not allow for hardware timekeeping DIO. M series and recent X series Multifunction DAQ devices allow such a task. If you want, I can have a technical representative contact you to discuss your request and provide appropriate suggestions to optimize your application.

  Kind regards

  Glenn

  Technical sales engineer

  National Instruments

• Mirror and rotation of whole groups of components layout

  How it is possible to rotate or whole groups of mirrored components? If you select a group of components and apply the mirror or rotation on each component group feature is mirrored or rotated separately and not as a group.

  Hi Nils,

  It is not really possible.

  If you enable a group of components and try to turn, each component will be rotatet for herself and not as a group.

  Other customers also wanted him have changed, they have created a post in our forum for the exchange of idea.

  http://forums.NI.com/T5/additional-NI-software-idea/MultiSIM-12-0-rotate-a-group-of-components-inclu...

  If you like this idea a cudos and write an own post in this forum. If you have enough fans, our R & D will try to implement this in the future of the versions.

  Best regards

• map display and switches

  I created each of the British county borders in the form of spreadsheets for each of the coordinates, the coast is not too defined as it is not necessary to be specific in this area.

  What I want to do is turn each of the areas of the County into a clickable switch to control the application, forcing the XY graph to re - load only the single County with other overlay information, ideas on how to make an irregular object behave as a control without changing its appearance?

  The attachment shows the card, this may seem a bit strange at the moment but Wales and Scotland are currently not included - Mike

  Hello

  You can use the generation of functions to get the value of a pixel in an image control (see attachment).

  Now you can create a copy of the image and fill areas counties with a unique color by using your favorite image manipulation application. Create a look up table (i.e. a list of countys and their colors) and to find the County to the color selected in the displayed image.