Turn off the display in Windows 7

Similar Questions

• Turning off the display in windows media player

  I want to use windows media player and send music to my active bluetooth speaker. The screen saver does not undertake, and I fear that the monitor will be damaged without being turned off or go to the econ. I have a sony vaio e series laptop.

  Thank you

  Modern monitors don't usually suffer from burning in the past, but you can always uncheck this option in the settings of your media player so that it will allow the screen saver to engage.

  

• I can't turn off the display when I use screem saver

  I keep my laptop always on, recently the screem saver don't work when I choose when turn off the display. All this time, the show view screem saver, but never active the option off.

  Hello

  ·        Is there wireless devices connected to the computer when you leave it on?

  Wireless devices may also not allow the computer to turn off the screen if there is no interference.

  In addition, it is not advisable to keep the laptop. He could be an update or a facility that has occurred and which requires a stop. Would cause the problem; try to restart the computer and check if the problem persists.

  If the problem persists, check that the power plans settings. For more information follow the link below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/power-plans-frequently-asked-questions

  Also, try to change the theme of the computer and check if that helps. to change the theme follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/change-the-theme-to-improve-performance

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to turn off the display after a while without input

  Original title:

  Activate the screensaver mode full-screen.

  Hello

  Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?

  Hello

  Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.

  Please visit the following links and set the option to turn off the display according to your requirement.

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

  Power management

  http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management

  Hope that the information provided is useful. Do not respond if you need more help.

• Pe10: How to turn off the display of the frame on the timeline?

  Hi - I've just upgraded to Premiere Elements version 10, and I see an improvement in reliability.  PE8 broke with regularity for me, but PE10 crashed yet.  It is a huge improvement fo rme.

  One thing that slows down my low editing much expected PE10 to redraw only the video on the timeline when I zoom in and out, scroll, etc.  I do it a lot when I change a video multi-track project and I get on with spending a lot of time waiting for PE10 to select and reder to images in the scenario.  I looked through the preferences, search fo a way to disable the display of video images on the timeline, but the only setting that I can find is the one that allows to set how scrolls the timeline panel, but nothing on how to control the display of video images on the timeline.  I think it has a setting somewhere given the duration of the UI has endured (maybe since version 4), and the amount of testing that Adobe has obviously made on version 10.

  I guess that I don't have to turn off the display of the frame on the timeline.  I'd be happy with any technical that allows me to edit interactively and not spend hours waiting for the timeline to complete images.  My computer has a lot of horses (quad core i7 to 3.3 GHz, 12 GB of RAM ant compatibility), so it's at the upper end of the material that first Elements users should be running.

  Thanks in advance for any suggestions you may have. -Ole Pa

  Looks like you are using the 64 bit version of Windows 7. You ensure that you have installed the 64 bit version of the program? That alone should make a huge difference in performance.

  Then go to the track header (name of the track, to the left of the timeline). If you click on the little icon of film on the track header, you will be able to switch between the different ways the clips appear on your timeline. If you see a period of time that you expect of your video display refresh, try to set the view so that only the first and last frame of the clip is displayed.

  You can also go to Edition/Preferences/general and set the timeline playback scroll Scroll of the Page rather than smooth scroll.

• Can I turn off the display on the Qosmio X 770 while I am running programs?

  Can I turn off the display of my Qosmio X 770 while I'm running programs such as virus scans to save power and the screen? Most laptops have a function key to enable this.

  Hello

  Of course you can do it.
  You can change the settings of your central in Win 7 power management settings.

  Go to the control panel-> power-> Plan on changes of settings Options

  Now, change the setting to turn off the display.
  I would have put a min

  In such cases the fi would not touch to the laptop for a min the screen turns off

• How can HF r600 I turn off the display when I save?

  I want to reduce my battery drain while recording events any longer.  How can I turn off the display while recording?

  There is an option to disable "Power on by using LCD Panel.  This deactivation allows you to record with the LCD closed and so will extend the life of the battery while recording.  The option to disable should be found in the configuration menu of the system (which resembles a key) and the option you choose is 'Off '.

• How can I turn off the CSS rule window?

  How can I turn off the CSS rule window?

  Please don't say 'you should really learn how to use CSS '.  I create my own CSS for many years very well without the nuisance of a pop-up window.

  Ah, I see - I don't think there is a way to stop this behavior when you are working in Design view in DW CS4. If you were still using CS3, you could deselect the "use CSS instead of HTML tags" in the General preferences category, but who went in CS4.

  Best - Joe

• Windows 7 turn off the display does not work when you use empty screen saver.

  My friend is running Windows 7 x 64 on a desktop and x 32 on a laptop.  He found that if he chooses the screensaver empty (set to 5 minutes) and will display at 10 minutes, the screen never goes round.

  On my laptop, I use the screensaver of ribbons with the same settings and my laptop screen goes off as planned.  However when I go to the screen saver, the display is never off (actually so that empty screen saver was active, my mouse reappears after a certain time).

  There seems to be a Bug with the Windows 7 built in empty screen saver.

  Thoughts, other experiences, etc.? Alex

  Hi archimedes027,

  I hope you are well, I understand you want to listen to music but have no display on your pc.

  If this is correct, there are two options that are available to you first open windows media player, right-click in an empty space at the bottom of the player and select options in the verification of the Advanced box section to enable the screensaver during playback,

  the second option you have is if you use another music player ie itunes then in the section Customization via right click on a empty space on your desktop, select the screen saver options and set it to none, and then click battrey you and together turn display both you need , windows 7 will be dim your office after a short period and in your turn to your screen settings.

  hope this helps let me know

  your

  Ashley

• Turn off the display on 20 minutes after no response on the monitor

  I have this weird problem my computer power setting defined as about 20 minutes after the display display off turn off when you try to move the mouse and the keyboard he still see the no screen (still running fine PC no screen but no response). Meanwhile, I restart my com and still no screen (PC still works very well at the moment) but I can hear on the background when windows starts. The most amazing thing is "I HAVE FOR THE COOLING SYSTEM AND offshore power ABOUT 20 minutes, THEN IT WILL RETURN BACK MY SCREEN MONITOR".

  Hardware specification

  Model of motherboard Asus P5G41-MLX

  Intel dual core 2

  Kingdom of RAM DD2 - 4 G

  ASUS EN9500GT 1 G graphics card

  I need expertise to solve the problem of e. thanks!

  Looks like the graphics card is overheating.  Check all fans of the system work, particularly that of the graphic card.

• Re: x 505-"turn off the display" does not properly

  To make a long story short, I had a load of problems with my Toshiba Qosmio X 505. I talked to tech support and they had me completely clear the computer and reinstall the OS. Everything has been fine for days until today!

  For some reason any whenever my screen turns off (for energy saving), I can't get my computer to respond. I don't know if he's asleep, going into hibernation mode, or even the difference between one of these things, but when I press the buttons, move the mouse/Touchpad, try multimedia keys, the power button, nothing makes my computer come back. I have to hold the power button / stop and completely restard come back again the computer.

  Why is this happening? It worked great for everyday, but I think it has something to do with the NVIDIA driver update I downloaded. It is the main change I have made to the computer yesterday and now it seems to do. Does anyone have recommendations? How can I make my computer stop doing that? I have all the options of my black screen off for now, but that does not seem a good solution for this problem that he used to work properly.

  Hey,.

  Akuma is right, you should only use the display drivers provided by Toshiba and not nVidia. The nVidia drivers are not pre-tested and that's the reason why they can cause such problems. Also they don t have an overheating protection, installation happens on your own risk.

  If you need to test it with the drivers from the official website of Toshiba. Prior to installation, remove the current display driver, and then restart the computer. Then you can begin with the installation of Toshiba display drivers.

  In the worst case it of necessary to reinstall the whole system again, but before that, you try a system restore to an earlier point.

• Turning off the display during the rendering?

  Hi all-

  quick question for you, is there a way to disable the display of images in rendering? And if so, it helps the rendering process run faster?

  Thanks in advance

  Sincerely-Douglas

  Yes, and it will make it faster. You can press Caps Lock shift once again to see the rendering to check on progress and press a second time to turn it off. It is really very convenient.

• Turn off the display of the popup volume keyboard

  Windows 7 Home Premium

  Pavilion Elite e9237c-b

  How to disable the display of pop-up the volume when adjusting it with the volume controls of the keyboard on the keyboard model KG-0851?  Although I love this feature, most of the time when running many web videos such as watch a live NASCAR race hitting the volume control causes the video to return in a small window instead of stay full screen.  I really realize, this isn't a problem of HP, but you would like to know if there is an easy way to switch to the display of the volume on-screen bar and the.  Even if I have to change the registry, I could easily create a toggle script.

  P.S. I went through all the options of sound and manual control and nothing to do, but it is possible that I narrowly missed the option somewhere.

  Your model has the software HP MediaSmart isn't? There HP MediaSmart SmartMenu? If that software usually causes the problem you are experiencing.

  Click Start, run box, type msconfig, and click OK. In the window that opens, go to the Startup tab and uncheck "HP MediaSmart SmartMenu.

• How can I turn off the guide in windows media center?

  I recently downloaded the guide in windows media center, and I want to disable it or uninstall it now.

  Go on settings, click general, and then go to the automatic download options and uncheck both options, save.

  This will stop him to download or update the predefined settings.

  Another parameter would be general and click on start up and the behavior of windows, uncheck the box open with windows, save.

  That it will take off from the list of start menus.

• How to turn off the Magnifier in Windows 7

  I can't be the only person who feels the pain of trying to get a simple question answered for Windows. The product is far too complicated and not organized or documented very well. He defeated the true purpose of a GUI and turns a game of "find the icon" your answers to engineers vary considerably on a simple question for example how to disable the magnifying glass. Now I know where all the people to the unemployment of the VCR document went.

  Sad...

  • Go to Panel\Ease to access \Ease access control
  • Click on make the computer easier to see
  • Uncheck Turn on Magnifier
  • Click OK

  Tricky