Turn off the feature that automatically optimizes the web browser, so that I can see perpetually my open tabs.

Similar Questions

• Problems with the WEB BROWSER blackBerry Smartphones, use not wifi network to open some Web sites

  Hello I'm owner of BB BOLD 9900 OS 7.1... for the last two days I am facing a pretty annoying problem with the BB browser.

  It means not affects the device... it just annoys me.

  When I TURN ON my WiFi on my BB with the network carrier Sim already homepage active who has a Active on it and open the web browser BB, according to the website on which I open the web browser chooses between the internet Wi - fi OR internet BIS carrier which is weird. BECAUSE a default if the wifi is enabled, then the web browser MUST use internet wifi network carrier for navigation. YOU TUBE, FB and TWITTER.com all use my carrier netwrok to open bt soon I open BBC.com or CNN or any other site the wifi symbol appears on the right side and so it uses the wifi network... and disappears when I opened THE 3 SITES you tube FB n twitter.

  My knowledge is that when you activate THE wifi network, the WEB browser is intended to USE the wireless internet, NOT the internet carrier

  The next time I switchd off the the carrier signal, and then Turned ON one internet WI - FI and then opened the web browser of BB. so now all the opend website with wifi internet bt as soon as I open YOU TUBE or FB or TWITTER.com it post a comment... .that cannot visit the web page when the carrier is off. Please turn on the radio n try again... I mean IT SHOULD OPEN with internet wifi? WHY do network carrier sim to open the web page?

  I have checkd my browser settings and they are default and also my wifi settings I have reset the... the problem still persists?

  any idea wats going on?

  Please help is needed I'm annoyed about this problem...

  Thank you

  MR. KIWI... Good news... .i went to my carrier service center... Solvedo Problemo!

  Go to your service books and remove directories of service WAP browser in all directories of service WAP 3 I don't know the exact name, but all are related to the browser... WAP config something like dat... Just remove dem... .and HARD restart your fone... and try to use only wifi on your device with your carrier network off...

  mine worked... Let me know on urs... so now, the browser uses my wifi instead of my network provider when both are running...

• How do I turn off the default browser setting, so I use Windows Explorer

  I installed Firefox as my default browser. I would now like to turn off so I can access Windows Internet Explorer

  Option/advance/general at the bottom of the general tab.

  Also, if you make this setting in Windows read this.

   Setting Firefox as the default browser does not work - What to do
  

• Header created in Muse is compressed in the web browser

  I am currently rethinking my website using Muse CC.  My header image looks cropped get when displayed in the browser Chrome Web.

  This is how it looks in the design view.

  

  And that's how is looks like the Chrome browser

  

  as you can see half of the image is missing.

  I have inserted the picture with a rectangle 1160 x 119 px.

  Fill the rectangle with the image, then set it to scale to fill.

  When I put it on the scale, it populates only 50% of the width of the browser.

  The hairpin at the top left image.

  However, I lose half of the image when displaying in the web browser.

  I use window 10 home.

  Can someone tell me what the situation could create this problem please.

  I think that this behavior is partially expected...

  I can't reproduce your problem completely, although I have created a similar layout.

  The fact that a part of the bottom is cut off, can be explained by the fact that an element of browser to scale as this framework, is allowed to extend beyond the initial width of its width. So, after that 1160 pixels, the image stretches vertically and horizontally to keep its proportions, but greater than the frame height.

  What I find strange is that it cuts both sides, and you said that you set to have its point of origin at the top left.

  Of 50% might have something to do with a setting HiDPI.

  Could you put the example on the line so we can have a better look at it?

• How can I download assets on the cloud through the web browser?

  Hello!  I have Adobe Cloud installed on my desk in my office, but sometimes I need to be able to download a remote desktop assets. I can download, archive, share on Behance, send a link via the web browser, but I don't see an option to download. What right did I miss?

  Thanks in advance for any help!

  Hello

  If you visit the cc Web site and select an asset, you will see 'Actions' on the top right of the screen. Then appears a download link. See my screen capture attached.

  I hope this helps.

  Thank you

  Warner

  

• I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that. In the ideal, of group policy or some ways to disable all the computers on the network

  I need to know how can I turn off the automatic updates of Firefox, because I work in a business that requires that.
  In the ideal, of group policy or some ways to disable all the computers on the network

  Some info here (Group Policy)-> http://www.unidesk.com/blog/how-disable-firefox-auto-updates
  
  Above article refers to-> http://sourceforge.net/projects/firefoxadm/

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

• NB510: Automatic wake-up call after the display of the elevator: cannot turn off this feature

  Hello, Toshiba!

  With the "hardware" program I put the switch on_ _automatic my laptop NB 510 _after raise the display_. Unfortunately, I don't have _can disable_ this feature.

  I tried in the 'Control Panel - Power' to disable this function, I tried to turn off this feature of the hardware configuration, but nothing helps.

  When I check 'turn off automatic registration' and restart my laptop, but nothing has changed.
  Also I reinstalled windows, I got out at 08:00 the motherboard battery, turn off the power to the laptop and remove the main battery, unfortunately, nothing helped.

  This is awkward for me, because when the laptop into my backpack, it sometimes turns on itrself and the battery is very low.

  How can I disable autoenrollment?...

  OS: Windows 7, Windows 8, system BIOS version 1.40, THIS Version 1.00, function 'Open Panel - Power On' ("Power Management" tab) in the BIOS disabled, but it still works...

  I'm really waiting for the answers, thanks a lot!

  PS sorry for my bad English, it's automatic google translate.

  I NB520 and it works fine (I can turn it off).
  Try please enter the BIOS and set the default parameters by using F9 and then save and quit with F10.

• How to turn off the scroll button that appears in Firefox 25.0.1

  When I use the mouse scroll button to scroll through button appears which makes the scrollbar of the browser when the mouse is moved. I would like to disable this.

  This should only occur if you click down on the scroll wheel. To lock, turn off the automatic scrolling feature. Here's how:

  the button Firefox orange (or the Tools menu) > Options > advanced

  Mini general tab, uncheck the box for "Use autoscrolling" and OK.

  Now, by clicking the scroll wheel on an empty area should do nothing.

  Success?

• After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. Major pain

  After the update to el Capitan my iMac will not be asleep. I put it to sleep and turn off the mouse and keyboard that goes with it, and 5-10 minutes later, he wakes up on his own. Now, I have to stop it after use and each time only. The Major pain. Any help would be greatly appreciated.

  Please test after taking each of the steps that you have already tried:

  Step 1

  Take all of the measures suggested in this support article, including those under the title "If the previous steps do not work." It is the starting point for a new effort to solve the problem.

  Note that, as stated in the article, the computer will not sleep, if some sharing services are enabled. In the menu bar, select

   ▹ System Preferences... ▹ Sharing

  Disable all sharing services.

  Step 2

  If sharing music iTunes home sharing is enabled, disable it or quit iTunes. Do the same with third-party applications that have a similar feature.

  Step 3

  Select

   ▹ System Preferences... ▹ Accessibility ▹ Speakable Items: Off

  Step 4

  Select

   ▹ System Preferences... ▹ ▹ Advanced Bluetooth...

  and uncheck the two boxes marked

  Open Bluetooth Setup Assistant at startup if...

  Step 5

  Reset the printing system.

  Step 6

  Back up all data.

  Triple-click on the line below on this page to select, then copy the text to the Clipboard by pressing Control-C key combination:

  /var/vm

  In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

  A folder named 'vm' should open. Inside, there may be a file named 'drag '. Move this file and only this one in the trash, but do not yet empty. You will be asked for your password. Close the folder window.

  Restart the computer and empty the trash.

• HOW CAN I TURN OFF THE KEYBOARD SCREEN. IE automatically stop coming.

  HOW CAN I TURN OFF THE KEYBOARD SCREEN. That is to say stop automatically come

  Hello

  ·         What is the operating system installed on the computer?

  Answer with the information above for you help.

• Manager Microsoft Access in the auditing keeps popping up for a password when I try to access any program - how to turn off this feature - where is it located?

  Manager Microsoft Access in the auditing keeps popping up for a password when I try to access any program - how to turn off this feature - where is it located?

  Hi Peggy Gore,.

  Welcome to Windows Vista answers Forums!

  Access Manager is a tool to control the types of content that your computer can access on the Internet. After Content Advisor activated, we can consider only rated content that meets or exceeds your criteria. You can adjust the settings according to your preferences.

  If you have set a password and you have forgotten your password, you may need to contact Microsoft Customer service to reset the password.

  For more information, please see the following links to Access Manager:

  Internet Explorer Content Advisor: Frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows-Vista/Internet-Explorer-Content-Advisor-frequently-asked-questions

  Using Content Advisor to block inappropriate web content.

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-Content-Advisor-to-help-block-inappropriate-Web-content

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• S580 Player restarts automatically after I turned off the tv

  When I turn off my TV, it also turns off my Blu - ray player through a kind of hdmi handshake. but for some reason my s580 is going to restart one or two minutes later. Anyone know what setting I'm supposed to solve? or what I'm supposed to do? I tried going though the menus on the TV and the player, not luck.

  Hello

  Welcome to the community of Sony.

  What is the cable used to connect the BD player to TV? The Blu - ray Disc (BD) player turns off automatically if it is connected using HDMI cables to a TV that has the BRAVIA Sync function and the control for HDMI function is set to ON. The BRAVIA Sync function will turn off the BD drive whenever the TV is turned off.

  Also, make sure that the BD player has updated the firmware in it.

  If my post answered your question, please mark it as an "accepted Solution".

• Unable to open encrypted drive up to that "turn off the csrutil.

  I was using OSX 8.5 until a few days ago. One of my discs is encrypted. For some reason I couldn't open it for a long time. A day after a reboot, the system refused to open it (I just restart my Mac Book every now and then). I tried several combinations of the password, nothing helps. It was not so important, because the disk contained only the old data.

  Two days ago, I have updated to OS x 11.5 and gave him a new trial, nothing had changed.

  However, today, I needed to disable the security protection by a "turn off the csrutil. A nice side effect is that I can re - open the disk encrypted with my known password.

  Isn't it strange?

  I have long run out of support, so I can hardly open a ticket for this. Maybe some else will do so?

  See you soon,.

  Gerd

  asux wrote:

  I have long run out of support, so I can hardly open a ticket for this. Maybe some else will do so?

  With your same Apple ID, you can register for a free developer account and start a conversation with Apple engineers

  Bug Reporter https://bugreport.apple.com/

• an advanced feature to turn off the lights does not work

  I downloaded "turn off the lights" and it seems to work correctly on some sites, but on others it reduces the brightness of the entire screen. In advanced options, check the box that says what it says, 'see all instant' to fix this and DL ' AdBlock more» I have AdBlock plus, but he continues to make the entire screen dim on. How this can be solved?

                         thank you,  lige
  

  his work in mine! 0_o?
  See the image

• I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this

  I just updated my ios to 9.3 and I would turn off the 6-digit password that he continues to ask me. When I go into settings/general there is no disable password? How can I do this

  Go to settings > Touch ID and password > disable password.