Two extensions of the range RE7000 with EA9500 router works not so well...

Similar Questions

• Mr President, how can I enter two rows at the same time with different default values that only the first line to use see?

  Mr President.

  My worm jdev is 12.2.1

  How to enter two rows at the same time with different default values that only the first line to use see?

  Suppose I have a table with four fields as below

  "DEBIT" VARCHAR2(7) , 
    "DRNAME" VARCHAR2(50),
    "CREDIT" VARCHAR2(7) , 
    "CRNAME" VARCHAR2(50),
  

  Now I want that when I click on a button (create an insert) to create the first line with the default values below

  

  So if I click on the button and then validate the second row with different values is also inserted on commit.

  The value of the second row are like the picture below

  

  But the second row should be invisible. It could be achieved by adding vc in the vo.

  The difficult part in my question is therefore, to add the second row with the new default values.

  Because I already added default values in the first row.

  Now how to add second time default values.

  Concerning

  Mr President

  I change the code given by expensive Sameh Nassar and get my results.

  Thanks once again dear Sameh Nassar .

  My code to get my goal is

  First line of code is

      protected void doDML(int operation, TransactionEvent e) {    
  
          if(operation != DML_DELETE)
               {
                   setAmount(getPurqty().multiply(getUnitpurprice()));
               } 
  
          if (operation == DML_INSERT )
                     {
                             System.out.println("I am in Insert with vid= " + getVid());
                         insertSecondRowInDatabase(getVid(),getLineitem(),"6010010","SALES TAX PAYABLE",
                          (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                         }
  
          if(operation == DML_UPDATE)
                            {                                                    
  
                               System.out.println("I am in Update with vid= " + getVid());
                           updateSecondRowInDatabase(getVid(),
                               (getPurqty().multiply(getUnitpurprice()).multiply(getStaxrate())).divide(100));      
  
                            }                      
  
          super.doDML(operation, e);
      }
      private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object value4, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "Insert into vdet (VID,LINEITEM,DEBIT,DRNAME,AMOUNT) values " +
               "('" + value1 + "','" + value2 + "','" + value3 + "','" + value4 + "','" + value5 + "')";  
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }
                }  
  
                private void updateSecondRowInDatabase(Object value1, Object value5)
                {
                  PreparedStatement stat = null;
                  try
                  {
                    String sql = "update vdet set  AMOUNT='"+ value5+"' where VID='" + value1 + "'";                     
  
                    stat = getDBTransaction().createPreparedStatement(sql, 1);  
  
                    stat.executeUpdate();
                  }
                  catch (Exception e)
                  {
                    e.printStackTrace();
                  }
                  finally
                  {
                    try
                    {
                      stat.close();
                    }
                    catch (Exception e)
                    {
                      e.printStackTrace();
                    }
                  }                  
  
                }
  

  Second line code is inside a bean method

      public void addNewPurchaseVoucher(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter = (DCIteratorBinding) bindings.get("VoucherView1Iterator");
                 RowSetIterator rsi = dciter.getRowSetIterator();
                 Row lastRow = rsi.last();
                 int lastRowIndex = rsi.getRangeIndexOf(lastRow);
                 Row newRow = rsi.createRow();
                 newRow.setNewRowState(Row.STATUS_NEW);
                 rsi.insertRowAtRangeIndex(lastRowIndex +1, newRow);
                 rsi.setCurrentRow(newRow);
  
                 BindingContainer bindings1 = BindingContext.getCurrent().getCurrentBindingsEntry();
                 DCIteratorBinding dciter1 = (DCIteratorBinding) bindings1.get("VdetView1Iterator");
                 RowSetIterator rsi1 = dciter1.getRowSetIterator();
                 Row lastRow1 = rsi1.last();
                 int lastRowIndex1 = rsi1.getRangeIndexOf(lastRow1);
                 Row newRow1 = rsi1.createRow();
                 newRow1.setNewRowState(Row.STATUS_NEW);
                 rsi1.insertRowAtRangeIndex(lastRowIndex1 +1, newRow1);
                 rsi1.setCurrentRow(newRow1);
      }
  

  And final saveUpdate method is

      public void saveUpdateButton(ActionEvent actionEvent) {
          // Add event code here...
  
          BindingContainer bindingsBC = BindingContext.getCurrent().getCurrentBindingsEntry();      
  
                 OperationBinding commit = bindingsBC.getOperationBinding("Commit");
                 commit.execute(); 
  
          OperationBinding operationBinding = BindingContext.getCurrent().getCurrentBindingsEntry().getOperationBinding("Commit");
          operationBinding.execute();
          DCIteratorBinding iter = (DCIteratorBinding) BindingContext.getCurrent().getCurrentBindingsEntry().get("VdetView1Iterator");// write iterator name from pageDef.
          iter.getViewObject().executeQuery();  
  
      }
  

  Thanks for all the cooperation to obtain the desired results.

  Concerning

• I have two version of the software of Microsoft one is work & the other is Works 7.0. Can you delete safely, I'm no computer expert.

  I have two version of the software of Microsoft one is work & the other is Works 7.0. Can you delete safely, I'm no computer expert.

  Sure, just go to Control Panel / Add/Remove programs and uninstall the version that you do not use.

  John

• Why none of the mobile applications are compatible with my Samsung Galaxy Note 10.1 Tablet? I can only use some of the mobile applications with my Samsung Galaxy Note 4

  Each Adobe Mobile App I want to install from the game store Android Google indicates that it is not compatible with my Samsung Galaxy Note 10.1 tablet, but some are compatible with my phone Samsung Galaxy Note 4. I prefer to use mobile apps on my tablet on not on my phone. Can someone explain why I can't use mobile apps on my tablet. I thought that mobile applications are compatible with the tablets and phones?

  Please refer to why none of the mobile applications are compatible with my Samsung Galaxy Note 10.1 Tablet? I can only use some of the mobile applications with my Samsung Galaxy Note 4

  (Double Post)

• Work of fine WebLogic Server machine url same p6 eppm primavera also works in server but the client lan both URLs machine works not

  Work of fine WebLogic Server machine url same p6 eppm primavera also works in server but the client lan both URLs machine works not

  When I install weblogic and eppm works in client machine only 10 minutes after does not always work in Server

  Thanks for the reply,

  I solved that

  Eppm proxy server is enabled, so I remove the proxy in internet option, it works very well in all the URLs of web client machine p6

• Plans test stops with the error 'Array with key "BB0050569F23260000-null" not found ".

  Dear gurus, I hope someone can help me with my problem.

  My SRM 4.0 Lab:

  • two servers vCenter v.4 + SRM 4.0 + EMC_Celerra_Replicator_SRA

  • two VSA Celerra with replication of work

  • two ESXi 4 servers connected to vCenter Server

  When I am trying to perform a recovery of the Test plan, I got the error 'Array with key as NULL "BB0050569F23260000" not found. "

  I guess it's something with recovery VSA, but cannot move forward, as I am a beginner in storaging.

  I've attached screenshots of the box of diag "Configure storage arrays", maybe this will help.

  Thanks in advance!

  without the hotfix SRA, you must rename your celerra VSA on the two sites do not contain not "-" in their names

  Itzik Reich

  Solutions architect

  VCP, VTSP, MCTS, MCITP, MCSE, CCA, CCNA

  EMC²

  where the news concerts

  If you find this information useful, please give points to "correct" or "useful".

• "Gateway router not found" error when you try to connect the TiVO DVR with DLink router.

  Original title: gateway router not found

  try to connect the tivo series 2 to the internet with dlink router that he used to work with previous tivo but not with tivo now, it says gateway router not found
  However, my laptop works fine with the router, I tried tivo support nothing helps, too, if I use the phone line works of tivo, but do not store a lot and is running out of room so it will not work fo rme, helllpppppppp thanks

  Hello

  Where exactly you get this error message?

  See the troubleshooting suggested in "Network error message N07 or C107" steps from this link.

  If you try to connect the tivo series 2 to the internet with dlink router then check out the link below:

  http://support.TiVo.com/app/answers/detail/A_ID/400

  Please contact the manufacturer.

• How to set up sites of confidence for the PDF Documents with Hyerplinks to Lotus Notes databases?

  Hello everyone,

  my company is using PDF documents with hyperlinks to Lotus Notes databases.

  When I open one of these files with Adobe Reader Default Setup, I can not open the hyperlinks.

  When I disable the safe_mode at startup, it is possible to open links.

  To ensure safety, we try to set the trust for our Notes Server site, but I couldn't find a solution.

  Our servers work with Lotus Notes 9, customers use the Version 8.5.3.

  Clients are installed with Windows 7 Enterprise.

  We test with Adobe Reader DC, Version 2015.007.20033

  Thanks for your support in this matter.

  Thank you in advance everybody!

  Hi oliverh33447604,

  Open Acrobat Reader DC, navigate to the Edit-> Preferences-> Trust Manager menu-> settings

  Use the option of the customer to add to the list of Web sites.

  

  Kind regards

  Nicos

• Linksys BEFSR41 connection with modem router getting not real internet ip

  Hello, can someone help with this problem. I connected to a modem router linksys BEFSR41 router. But when I watched the status in linksys BEFSR41 router, it gives only an IP from the modem router and no real internet ip address.

  can someone give me an answer.

  Thanks in advance.

  Don't string two routers. Fill the modem/router or don't use the BEF as a router, but only as a simple switch (or replace it with a standard ethernet switch).

• Two RadioButton on the same line with any idea...

  Hello

  Can I add two RadioButton singel online...

  I m using HorizontalFieldManager with him

  but only the first button is visible... give me a solution simple and good for this please help me.

  Thank you

  Himanshu

  Beginner

  Please find the Code below and try it and let me know...

  radioButtonGroup = new RadioButtonGroup();
  
          radioButtonField = new RadioButtonField("Radio 1", radioButtonGroup,
                  true, 0) {
              protected void layout(int arg0, int arg1) {
                  setExtent(Display.getWidth() / 2, arg1);
                  super.layout(Display.getWidth() / 2, arg1);
              };
          };
          radioButtonField1 = new RadioButtonField("Radio 2", radioButtonGroup,
                  false, 0) {
  
              protected void layout(int arg0, int arg1) {
                  setExtent(Display.getWidth() / 2, arg1);
                  super.layout(Display.getWidth() / 2, arg1);
              };
  
          };
  
          HorizontalFieldManager hfmFieldManager = new HorizontalFieldManager() {
              protected void sublayout(int maxWidth, int maxHeight) {
                  setExtent(Display.getWidth(), maxHeight);
                  super.sublayout(Display.getWidth(), maxHeight);
              }
          };
  
          hfmFieldManager.add(radioButtonField);
          hfmFieldManager.add(radioButtonField1);
  
          add(hfmFieldManager);
  
          add(new LabelField("This label is below the two radio buttons",FOCUSABLE));
          add(new ButtonField("Click ME!"));
  

• all characters replaced by square with two zeros on the top and a number below, works ok when uninstall it, reload and start the first time, after that the problem reappears. sometimes works first time to reboot. IE and Chrome ok, light running. v 7, wind

  Set up of fonts etc seems to be ok, still had problems with plug-ins disabled

  Try to set the pref gfx.font_rendering.directwrite.use_gdi_table_loading false on the topic: config page.

  To open the topic: config page, type Subject: config in the address bar (address) and press the 'Enter' key, as you type the url of a Web site to open a Web site.
  
  If you see a warning then you can confirm that you want to access this page.

  • Use the filter at the top bar of the on: page config to more easily spot a preference.
  • Preferences that have changed also show "BOLD" (user set).
  • Preferences can be reset to the default value using the context menu if they are set of users
  • Preferences can be changed via the context menu: Edit (string or integer) or toggle (Boolean)

• Question about running from two cameras at the same time with MAX

  Hello

  I have two cameras attached to NI PCIe-1430 frame grabber card (Atmel Aviiva M2 CL and Fairchild 2 K LS) IRLS. It's ok when I run two cameras individually, but I can't run them at the same time.

  This is the step that simultaneously run two device:

  1. open MAX, select the port and start image acquisition by pressing the 'Grab' button, I can see the image at this point.

  2. open another MAX session, select the other port and press "enter". I got following error:

  "Error 0xBFF60021".

  Unable to perform request; acquisition in progress'

  Sometimes, I got this error too:

  "Error 0xBFF60022".

  A timeout error occurred while you wait for the specified event. If you expect a picture, check the video data is acquired in the period. If in the meantime the signal, check that the assertion of signal has occurred within the period. »

  I already give enough timeout Fame to the tab settings of Acquisition.

  The MAX version used is 4.5.

  You have an idea on that? Makes simultaneous Imaging MAX support?

  Thank you

  -polarfox

  Thanks for the quick response Bruce.

• I have two folders in the same subdirectory with the same name. How to remove the extra folder?

  I have 2 directories "documents" located in the same directory. They are as well located in C:\Documents and Settings\ [user_name]------directory. Duplicate folder is automatically updated with the same file names when I add files in the original folder. It looks like a pointer to the original folder, when I try to delete the duplicate directory. I get the following error message.

  Can't delete My Documents: it is used by another person or program.
  Close all programs that might be using the file and try again.

  I deleted all files in the directory, rebooted the computer and attempted to delete the now empty folder and I get the same error message. Can you help me remove this duplicate folder.

  Note:
  ------

  I am not able to rename the duplicate folder... If I try to rename, the original folder is renamed... But not the duplicate. Also the duplicate folder becomes empty (since it runs a pointer to the original folder, when the double original of renowned gets is empty)

  Mager

  In Windows XP, all user folders were located under the C:\Documents and Settings folder.

  In Vista , all user folders are located under the folder C:\Users .

  Vista Documents and Settings folder is not a real file it's a junction folder that points to the Folder C:\Users.

  A junction is as a shortcut that points to another file, that is why these records have a shortcut (arrow) overlay icon. In Vista, the only reason why the Documents and Settings junction is for the old installers who are looking for a Documents and Settings folder. When they try to access the folder Documents and Settings, the junction in silence re - runs Setup to the C:\Users folder.

  The default permissions for the Documents and Settings junction is access denied, even for the administrators of .
  
  The only way that a user can access this file actually is if the access permissions have been changed.

  For a more detailed description of this topic and a list of all the junctions see the following Web site.

  Windows Vista Junction Points:
  http://www.Svrops.com/Svrops/articles/jpoints.htm

  I recommend that you move all your files and immediately stop using the Documents and Settings folder to avoid more problems.

  If this just started recently, I recommend that you use the system restore back to a point before the documents and settings folder was first access.

  Ronnie Vernon MVP

• What is the file extension for the files saved with my headers and footers?

  I moved to a new PC and I pray my headers and footers have been moved but I need help looking for files and the file extension would be easier!

  I found my answer

  C:\Users\#username#\AppData\Roaming\Adobe\Acrobat\2015\Preferences\HeaderFooter

• Console the two options at the start - problem with Restart of recovery and XP Professional

  I have the recovery console option at startup instead of wndows XP Professional. Currently, I put my computer starts automatically in Windows XP Professional after ten seconds have passed.

  It works normally except when my computer wants to stop and restart because a new program has been installed or changes have been made to the configuration of the software installed on my computer. In this case, my computer hangs just when it is trying to restart after it has been switched off.

  So my question is, has he entries I can make to the registry to force Windows XP start automatically in XP Professional after he stops for a reboot?

  Thank you for your help in this matter. I appreciate that very much.

  Hi Gak1952,

  Follow the steps in the article.

  Advanced Troubleshooting for General startup problems in Windows XP

  http://support.Microsoft.com/kb/308041