Two monitors XPS 8700

Similar Questions

• Problem connecting-up monitor Dell XPS 8700 S2715H

  I just purchased the Dell XPS 8700 (i7-4790) / 16 GB and the 27 '' Dell monitor S2715H.  The graphics card is Nvidia GeForce GTX 745.

  The monitor turns on but that's it.  And I see that the PC power supply light is also on.  But there is no picture.

  After spending several hours in my own train, then with Technical Support Dell on phone that says I need a VGA cable (tried).  But I STILL get the error after (in italics below).

  My question is THAT I have to get my monitor working.  So far I have not been able to use this new Dell system.  Is someone can you PLEASE help me solve this problem.

  Apart from supply cable of the monitor, there are only two other cables that came, i.e. HDMI and a USB cable.  I tried both and then the single HDMI, then the only USB.  I also tried the VGA connection by itself and with the HDMI.  NOTHING HAS WORKED SO FAR.   Help, please:

  ATTENTION: No supported video Configuration detected

  Action is required

   This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

   To connect the cable from the monitor into the graphics add-in card:

  1. shut down the computer

  2. plug the cable from the monitor into the graphics add-in card connector. This may require a video card or the video adapter cable. (provided with the system)

  3. turn on the computer.

   This message should not appear after you complete these steps.  For more information or assistance, please refer to the system documentation.

   Please press the power button to turn the system off.

  

  Use the HDMI port on the discreet graphics card and do not connect what either on the integrated graphics card connector.

• 3 monitors on XPS 8700 with AMD Radeon HD 270 R9

  Hello world

  Just a quick question. Can I conduct 3 monitors to a XPS 8700 with the AMD Radeon HD R9 270 card?

  I read somewhere that it supports Eyefinity, and in the marketing of the images I see 3 ports on the video card. an hdmi and a DVI and a VGA. Eyefinity normally uses an active displayport adapter. You don't know everything just not if I'll be able to use all 3 ports to control monitors. Or maybe use 2 ports from the dedicated card and the onboard port.

  Thanks in advance for any help!

  Steve

  I've never tested, but in theory, it should work.

• 3 installation of monitors on Dell XPS 8700

  Hello

  I realize that he had already given a few questions and answers on this topic, but I'm still a little confused, because this kind of thing is not my strong point.  I would be very happy to help here.

  I just got a new Dell XPS 8700 with a videocard of NVIDIA® GeForce® GTX 745 4 GB DDR3.  I'm going to need to have a 3 monitor configuration in the near future and I was wondering the best way to make this work.  The video card has 1 VGA - HDMI, DVI-D-1 and 1.  Separated from the video card, there is an another HDMI and a Displayport.

  I have not completely made my decision between 3-23 "or 2-23" with 1-27 "immediately.  (Will not be the fanciest monitors in the world). Exodus 3 - Dell S2340M or 2 of those and pick-up and Ultrasharp for fun.

  I'm not a gamer.  I'm a trader.  I can't manage any lag when updating. I'm not too concerned about the image is as clear as possible.

  Thank you much for the help.

  You can use as well the equipped with an Intel HD4600 video card and a video card discreet if Intel Multi display is enabled in the Bios. With the Intel option enabled multi-display, HDMI on Board will be the primary display and ports on the discrete card screen will become secondary display. Read this article before you proceed.

• Dell XPS 8500 with 1 GB AMD Radeon HD 7570 - how to connect two monitors or?

  Hi, I got my Dell XPS 8500 today with the 1 GB AMD Radeon HD 7570.

  Before buying the office, I read online that the AMD Radeon HD 7570 supports Eyefinity.   Eyefinity is supposed to be capable of supporting 4 monitors using the HD 7570 map by the description here: http://www.amd.com/us/products/desktop/graphics/7000/7570/Pages/radeon-7570.aspx#2

  When you look at the photos of the Dell XPS 8500 online I thought that Eyefinity support was to use a display in addition to the DVI port Port.   Specifically, I thought that a monitor has been supported by DVI monitors while 4 thru two supported using an active connection to the view port using a product like the DisplayPort Accell UltraAV K087B-005 / 3 x multi-monitor DVI - D single-link adapter.

  To my surprise the graphics card came with an HDMI port, not a display port and I believe that HDMI port is a connection from one to the other, and not one of many display connection.   Maybe someone can correct me if I am wrong on this point.   But if I'm not wrong then, this would imply that, at most, the Dell XPS 8500 with the AMD Radeon HD card 7570 can support up to only 2 monitors (one DVI port) and the other HDMI port instead of 4 monitors as described on the above link.

  Others would agree with this statement?

  Note that the Dell XPS 8500 also has a VGA connector on it but I tested it using a monitor on VGA and a monitor on the DVI connection and the computer that reported as an invalid monitor config.   Probably because the VGA and DVI connections are originally the same video display as connect two monitors to display even has no logical sense.

  I have not tested the HDMI port for the second monitor again mainly because I don't have a spare HDMI cable on site at the present time.   I'll probably buy one tomorrow unless I see the comments of my post, specifying that a second monitor can be moved through the HDMI port on the AMD Radeon HD 7570 map...   I'd be surprised if that were the case (1 monitor system would be quite restrictive), but it is difficult to say with certainty, because the VGA and DVI connections at the same time have been marked by the computer as an invalid configuration...

  Any thoughts on the different ways to configure multiple monitors with the XPS 8500 and the 1 GB AMD Radeon HD 7500 is appreciated.

  Thank you.

  Doug

  If the card is not a display port is not an eyefinity card and cannot stand 3 monitors... it will be 2 monitors, no problem... I couldn't find anywhere on the site of Dell, where he says that the card was eyefinity... If you want 3 assumption of monitors you can buy a video card that supports.

• Graph of two cards in a XPS 8700

  I just boght a XPS 8700 (I have not yet) and I want to know if I can install two GTX 760 inside graphics cards.

  Yes

• DELL XPS 8700 compatible with the monitor Samsung Syncmaster 2232 office

  HI - can anyone confirm that the DELL XPS 8700 desktop computer is compatible with the monitor Samsung Syncmaster 2232.

  Already, I have the monitor, but need a new processor unit.

  Thank you...

  Hi yydelilah,

  The monitor has VGA and DVI ports.

  By default, XPS 8700 comes with HDMI and display port.  If the system is configured with a discrete card, and this card has DVI/VGA port, you will be able to connect to this monitor.

• XPS 8900 two monitors, one video card

  If you look at the back of the XPS 8900, there are 2 connections monitor (DP and HDMI) on the motherboard.  It would be the 530 Intel GPU that comes with it.  Then my system also came with a 730 GT PCIe card.  Currently, I have two monitors working using the RFP on the motherboard and on the GT 730 DVI port.

  I wonder if this supported dual monitors, but only on internal Intel 530 map with two connections hanging there?

  I got an HDMI cable to DP I've tried, but windows has never found the 2nd monitor.  So, I don't know if 2 monitors on the Intel 530 card are not supported (I'm sure that Intel is in favour, but not sure that Dell has allowed this) or my cable is interrupted.

  OK, with a DP to DP cable and a HDMI to DVI cable, I can only use the Intel 530 card on board.  So it turns out that I had the wrong front cable (HDMI / DP is not a valid path).

• XPS 8700 Hard Drive failure - after less than TWO WEEKS

  I'm a little frustrated.  I recently ordered a new Dell and XPS 8700 office.  Everything seems to work well.  Then yesterday I walked away from my office for 5 minutes, and when I came back, I got a screen saying my computer could no longer starts.  After spending some time on the phone, we confirmed what I already suspected, that my hard drive has failed.  This was after less than two weeks!  Is this a common problem with the recent Dells?  I am certainly not happy having to wait several days understood of the technology that will be (according to the support person) that I spoke) an appointment to install a new hard drive.  I'm more frustrated that I'll lose data, installed applications and settings that I have spent the last two weeks on.  I assumed that if I had to look on the bright side of things, it wasn't months or years of work that was lost, but I fear that the replacement of the HDD will suffer the same fate on the road, making me lose a lot more work.  Besides than to spend the money to set up a backup system, how to avoid this problem in the future?  And what is the level of reliability of hard disks installed in the 8700 s XPS?

  Dell uses a variety of brands of hard drive of their computer. HGST, WD, Seagate and Toshiba are trademarks used. Your next hard drive could be one of those, there is a chance it will be different than what you have now. As with all hard drives, they will be eventually. some quickly, other overtime. I wouldn't worry about replacement drive failure. If so, check and see if it was the same as the previous disc.

• Please help trouble Code 43 error graphics card for XPS 8700 (as well as the disappearance of sleep/Standby Mode) (Windows 10)

  I got my XPS in 2014 and my warranty of service completed in 2015 Jan before I installed Windows 10. So since I've upgraded to Windows 10 I started having problems with by XPS 8700. Now, I have no guarantee. I thought he would go better once they have released an update of the BIOS and it did for a while unfortunately in recent months, I noticed two major issues.

  (1) upon the starting and restarting my computer, my monitor does not end up receiving the signal from the computer and remains dark.

  -Checking that it is not a problem with the monitor by testing with other computers

  -J' checked in the Device Manager and there was a next yellow alert for graphic cards / NVIDIA GeForce GT 635

  -By clicking on, he showed me this: Windows has stopped this device because it has reported problems. (Code 43)

  Unfortunately, it is not the only problem with the graphics card.

  (2) "sleep" my mode is gone (it is related to graphics and BIOS).

  -J' tried the go in power to add setting but it was not yet listed.

  -I went to the command prompt and looked powercfg.exe that's what I discovered:

  C:\Windows\System32>Powercfg - a

  The following sleep States are available on this system:

  Hibernate

  Quick start

  The following sleep States are not available on this system:

  Standby (S1)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S2)

  The system firmware does not support this standby state.

  An internal system component has disabled this standby state.

  Graphics

  Standby (S3) mode

  An internal system component has disabled this standby state.

  Graphics

  Eve (S0 low idle power)

  The system firmware does not support this standby state.

  Hybrid sleep

  Standby (S3) mode is not available.

  Now I really wish I could start or restart my pc without staring at a blank screen and the problem of code 43 with Nvidia GeForce GT 635. Also, I would if I could have the option to upgrade my PC to sleep. I really miss it and do not have to constantly reboot my computer to be able to see anything on the monitor.
  

  I hope someone can help me with these questions without having to reset the pc and reinstall, all over again, that the problem still exists in other cases (I don't have a copy of the installation of programs pre-installed dells so...). This computer is only 2 years old, it didn't need to be retired.

  NVIDIA GeForce GT 635 (PCI\VEN_10DE & DEV_1280) the card is physically wrong and needs to be replaced.

• Dell XPS 8700 - technician Dell beat the Audio drivers

  Was originally a XPS 8300, he had problems and replaced by a 8700 XPS Dell.

  Other than having to blow on the operating system and install 8.1 on the SSD instead of the mechanical drive, I thought everything was working correctly.

  Come to know that I have static detach audio from the motherboard. Troubleshoot-performed on mine... two different monitors with speakers and a 55 '' HDTV LG. Static on each of them with two different auxiliary cables. Then connected to the monitor and LG TV via HDMI to my video card and voila... a crystal clear sound. Not static.

  Dell has decided to try to solve my problems of its motherboard remotely by phone and basically broke my Audio drivers. She has uninstalled the driver and tried to reinstall and now he repeats down in big red letters.

  When I click in Device Manager there is not an explanation mark... it's just appearing as a generic «High Definition audio» description Before that he was showing the Realtek Audio driver as it should.

  Dell sent a replacement motherboard and the technician just installed it at home but they cannot always get the driver to install properly and she wants me to blow my BONES together. Ugh!

  Everyone knows these before driver with integrated sound hardware XPS 8700 problems and if so, how should I do?

  I would avoid blowing my PC if I can, I just went through the pain of a data migration and install OS and program news.

  * Uninstall the generic "High Definition Audio" device in Device Manager
  * Go here and do the automatic update of Intel
  * Reset
  * Realtek the only update from the same page
  * Reset

• p2714t and xps 8700

  Can I install p2714t on my new xps 8700 special edition touchscreen monitor?

  Yes, you can. Strangely, these two products have even been sold together in some cases: (external, not associated with DELL, Web site for reference only) http://fotki.yandex.ru/users/dell-cis/view/938987/?page=0

  As a general rule, all what you have to do is install the drivers and plug it and potentially to calibrate.

  Not know if you have any questions or concerns about its use in the community. Each different configuration system AHS and your 8700 is not the same as the world 8700 if sometimes complex issues may arise. :)

• XPS 8700 and Sapphire Radeon HD 7870 OC graphics card

  I saw a thread on here stating that the AMD Radeon 7870 was compatible with the XPS 8500, so I guess that the overclockee of this card Sapphire version would work in my XPS 8700.  I inserted the card into my computer and connected the two power connectors 6 pins.  When I rebooted the computer, he made five beeps short and then put under tension (without the Dell splash screen, I think).  Restart again (and hear the same five beeps), I pressed F2 to enter the BIOS, but it wouldn't let me get into the BIOS.  The third time that I restarted, I just let it start and then after about half an hour of use, the computer is frozen on a blue screen (not BSOD). I turned off the unit and do not have reverse.

  I chatted with a few guys from Dell, which said that the five beeps meant that it was a problem of compatibility of video card, but he could not say more than that and pushed to me to contact Dell sales to buy a compatible card (no thanks).

  Anyone can check that the five beeps are told?  I hate to have to return this card to where I bought it and I'm not sure I can.  I get beeps if there is a driver problem that I'm missing?  Or beeps always mean a hardware problem? I'd get a beep if my diet was too weak?  Other thoughts?  Someone at - it no good they know maps work on the 8700 XPS?

  There was many problems reported with some video cards and the XPS compatibility 8300, 8500, and now the 8700.

  Make sure that you uninstall the drivers for video cards before you remove them and put in a new card.  Make sure that the power supply is disconnected and you have pressed and held the power button for at least 15 seconds.  You can also try to remove the CMOS battery.  Then install new video card, replace the battery and plug it back the power cord.

  In addition, connect the monitor to the integrated graphics card and restart.  Press F12 or F8 to access the Start Menu. Under the Start Menu, there should be a 'Change Boot Mode Setting' setting. This parameter will have the possibility to turn UEFI Secure Boot on or Off, change it to Off.  It is a common problem in Windows 8 that occurs when you try to add another video card due to conflict with Secure Boot and new motherboards UEFI where you post or get the beep codes.

• U2414H, XPS 8700, Confusion

  Hello

  Could you Chris or any other subject matter expert help me please?

  I received my dell xps 8700 and u2414h monitor a few days back, but not yet able to use them again because of connectivity issues. Very frustrating!

  I spent an hour on the phone to support technical today, but they don't seem to grasp the problem.

  The pc comes on shelf with this graphics card:

  NVIDIA GEFORCE GTX 750TI 2 GB DDR5

  Am I right in thinking this means that I cannot use the connection port on the actual video card and not the DP/HDMI ports on the pc itself? That is to say the mini DP DP cable supplied is of no use. (if so, it's basic instructions that must accompany surely the pc and the monitor!)

  Support centre said they would send me a hdmi converter regardless, but then reminded a few hours later to say that they were not able to send me one of them, but he could send me a vga / dvi adapter. I don't know that I have this to connect?

  The graphics card seems to have two dvi connectors and a micro HDMI.

  The solution mentioned by other users seems to be hdmi connection hdmi (or micro hdmi in my case), but I've read elsewhere that the hdmi connections can cause other problems to monitor here, including issues of color.

  Can someone give me a definitive answer on the connectors to use, and if I'm likely to have subsequent problems with colors etc (I do graphics work, so the colors are very important to me)

  Thank you very much in advance for any help, anyone is able to offer.

  Kind regards

  Nick

  The cable provided in the box monitor has nothing to do with the computer that you order. They come from different places. They are not bound together somehow.

  The U2414H of the factory comes with the following cables =.
  Power cable
  JHF6D mDP to DP cable
  Cable USB 3.0 P57VD

  The U2414H has the following ports =.
  DP
  CDM
  HDMI
  HDMI

  The technical sales page tab shows clearly.

  XPS 8700 Nvidia GeForce GTX750Ti video card has the following ports =.
  DVI - I
  DVI - D
  Mini HDMI

  * Go to the sales page
  Find the video card section
  * Click on "help me choose".
  * Click on "compare video cards.
  * Scroll down to the maximum resolution
  * From there you could have checked all video cards and chose one with DP on

  Because a discrete video card was added to the XPS 8700, you cannot use any onboard senior XPS 8700 ports. You must use the ports on the discrete video card. So in your case, you will need to purchase either:

  Mini HDMI to HDMI Cable

  HDMI DVI cable

  If you really want DP video card to monitor the CDM, you must return the video card from Nvidia GeForce GTX750Ti credit 8MXMJ and buying a video card XPS 8700 out DP has =
  TC2P0 Nvidia GeForce GTX745 M302N, 4GB, DVI-I/DP/HDMI
  FPDH3 Nvidia GeForce GTX660 D15P2-40 V2, 1.5 GB, DVI-I/DVI-D/DP/HDMI
  9168: Nvidia GeForce GTX645
  9KYFK AMD Radeon R9 270 RD14D-P1-70, 2GB, DVI-I/DVI-D/DP/HDMI
  WNMHJ AMD Radeon HD8870, 2 GB, DVI-I/CDM/mDP/HDMI

• New XPS 8700 - cannot properly set resolution

  I have a new 8700 XPS with Radeon 7570, that has a DVI - D and HDMI port.  There is also a display port on the motherboard, but I don't have a monitor with a DisplayPort port, so that one is now useless for me; In addition, I want to use the Radeon, so I'm ignoring the video to the mobo.

  I have a DVI-D-to-DVI-D cable, I was using on my old system, so I know that the cable is good.

  I have a new cable HDMI-to-DVD-D who just today.

  I want to drive a Dell 3007WFP (2560 x 1600, and its only entry is DVD - D) as my main screen.  Must it be connected to the HDMI port of the Radeon (via HDMI-DVI-D cable), or the DVI - D port (using the DVI-D-to-DVI-D cable)?

  My second monitor is an old but a goodie - Dell (1920 x 1200) 2405WFP.  There D DVI or VGA as possible entries.

  So I have a computer with HDMI and DVI - D cables to connect out for each monitor.

  I currently work 2405 with the Radeon in 1920 x 1200 (as my secondary display) using the DVI - D - to - DVI - D cable, leaving the HDMI-DVI-D cable for the 3007.

  My problem is that I can't drive the 3007 higher than 1280 x 800,-there is no option to keep the higher resolution.  The cursor I get under "Screen Resolution" only goes to '1280 x 800 (recommended) '.  I tried the two cables, and 1280 x 800 is as high as possible.  I reinstalled the Catalyst drivers.  Everything appears in OK (no yellow exclamation) Device Manager.

  HOW can I DRIVE a MONITOR 2560-x-1600 OF THE RADEON HD 7570 IN CE XPS 8700?

  * EDIT * I forgot to mention that I got the car that came with 8 Win out and put in a new blank disc perfectly and installed Win 7 (64) business.  What is a driver-install-order problem?  Also, the machine came with BIOS A02 and A03 is common, but I don't see that as being the difference.

  Solved.  It WAS apparently a driver-order problem.  "Drivers and downloads" page of Dell is spectacularly counterproductive in terms of describing what are the components (e.g., what they DO).    I took them in this order:

  01 Chipset_Intel_Win_A00_21Y1M_Setup_ZPE.exe

  02 ME_Intel_WIN_A00_Y22PK_setup_ZPE.exe

  03 USB3.0_Intel_Win7_A00_1TH4K_Setup_ZPE.exe

  04 iRST_Intel_Win_A01_Setup - VF6WW_ZPE.exe

  05 GFX_A00_12.102_J47H1_ZPESetup_ZPE.exe

  06 DW1703_Win74_A00_Setup - 217VH_ZPE.exe

  07. LOM_Realtek_Win74_A00_Setup - WP9GX_ZPE.exe

  08 6235BT_Intel_Win74_A00_CR86R_Setup_ZPE.exe

  09 6235WiFi_Intel_Win74_A00_Setup - 4PJGP_ZPE.exe

  10 Audio_Realtek_WIN_A01_313J8 - Setup_ZPE.exe

  11 CardReader_Realtek_WIN_A00_Setup - J76W2_ZPE.exe

  And now it works like it should (I can set the resolution 2560 x 1600 widescreen)