Two questions: Running XP and have some interesting questions at the start and with IE.
Hi, I try to wear the IT hat and works to clear up some questions on my mother's computer. #1 I guess that the computer was shipped with a version of Corel Photo software on it and we cannot get rid "Installer" messages at the beginning upward. We tried to remove the program and the same message comes back to tell us that "Installer can do the requested action without the CD/program files" it gets about 6 of these reviews that it must close any until the computer will continue to boot the system. Please, please tell me how to get rid of this. I tried to install the 'Installer' update to see if that would make the difference and nope. I also tried to remove the Corel file via CCleaner and got the same message. I do not have the program disc, I don't want to program... I want to just get rid of it!
#2 when entering address in the Internet Explorer address bar, the browser opens a second browser instead of going to the requested site. For example, when I open my Internet Explorer and say go to the top of the address bar and typewww.google.com, instead of going to Google, it opens a completely separate browser. When she did this, it's EXTREMELY SLOW! until you think that IE went unresponsive and then finally opens the second browser.
I'd appreciate any help! I'm trying to solve these problems, while I'll be staying here so that I can leave him a computer running.
Thank you!
Hello
· What version of Internet explorer that you are using (Internet Explorer 6, 7 or 8)?
· Was long before Internet Explorer work?
· Since when are you facing this problem?
Step 1:
It may be some third-party software that runs in the background that is shown with the process, I suggest you do a clean boot and check. To perform a clean boot follow the steps mentioned in the link given below.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Note: Once you have finished installing, follow step 7 to start the computer in normal startup.
If the steps above don't help you not to remove the Corel Photo software, I suggest you to post your query on the forums of XP. Click on the link below.
http://social.answers.Microsoft.com/forums/en-us/xpprograms/threads?filter=answered
For Internet Explorer related issues, follow steps 2 and 3 of the step.
Step 2:
I suggest you run the fix it this tin article given to repair Internet explore
How to reinstall or repair Internet Explorer in Windows Vista and Windows XP
http://support.Microsoft.com/kb/318378
Step 3:
If you use Internet Explorer 7 or 8 I suggest you run the fix it is present in the article below. If you use Internet Explorer 6, you can follow the steps mentioned in the article given below where they apply to Internet Explorer 6 also.
How to reset Internet Explorer settings
http://support.Microsoft.com/kb/923737
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Two questions about the controller of the exporter
Hi guys,.
I have two questions on the controller of the exporter.
1. as the controller of the exporter uses its own user interface, is it possible to generate new files pre-defined in the controller of the exporter to represent its user interface is happy?
2. how the Ftp settings are stored in the preset currently file? I want to change in my own exporting contronller rather than first UI.
It will be very appreciated if someone could answer these questions.
Thank you.
Hi Alex,
(1) there is no API to create/modify the presets of the exporter, but as you can see, the .epr file is XML and quite easy to debone in most regions.
(2) Oh, I forgot this FTP settings checkbox save. Good fishing! Yes, the binary data in the .epr are encoded in base64. The last time I checked (there are several versions), Premiere Pro checksum function is a CRC 32 bit with a polynomial of 0xEDB88320L. It is not guaranteed to remain the same from one version to the other.
-
I need my files to open in the monitor # 2 I usually have some important information about the number of monitor 1. I need the files to alternate when they are open. One in 2, then one 1.
Kind regards
How it works is usually the application (explorer.exe is an application) in question is open about everything that monitor his last (final) session was closed the. Not all applications have this built-in memory, but most do.
I don't think that even something TO manage multiple monitors (this is what it was built for) will do what you are wanting. ;-) I see no way of programming of this type of automation. ;-)
-
Is it possible to plug a USB to my new iPad Pro, to transfer PDF files and some Jpeg files from the USB key with an adapter of lightning? If there is NO adapter, how can I get these files on the USB key and my iPad pro? I need these PDF files transferred my I touch pro. Any suggestions? Please
Thank you
Mike Tingey
The iPad does not support USB keys. There are some wireless flash drives that can be used, but not the classical records. I suggest you transfer files to a computer and their synchronization then back to the iPad via iTunes.
-
Two screens running simultaneously and in the background.
I try to have two screens simultaneously running in the background. All have two timers for different events and I would like the user to switch between them in the menu to check their progress. I also want to the app with both screens to be able to run in the background when closed.
I have them both running in the background by substituting onClose displayed on the screen with:
public boolean onClose() { UiApplication theApp = UiApplication.getUiApplication(); theApp.requestBackground(); return true; }
Which works very well. But how do I do the same reverse backwards between screens in the application?
The feature I'm looking for is similar to the stopwatch of the RIM. You can simultaneously run the stopwatch and timer. You go back between them in the menu...
Thank you
When you are referring to the screen, I guess average u of the GUI. You can create the interface at the beginning that is, launch the application, then you should use the instances of the screen to bring them toward the front of the stack (visible to the user).
I think some pseudocode would be useful as im not 100% of the structure of your code and what exactly you doing.
The snapshot from the above code, you create an instance of the screen every time so I understand you want to rather just put the screen at the front of the stack.
You must also run the timers in a different thread, not in the user interface thread. Maybe think of it this way, you have a class that manages the two screens and holds the instance of the timer, so you can access and create the user interface for him.
Hope this makes it a little more clear.
-
Satellite A20-S103D: two questions about the recovery process
Hello
I bought the machine above my nephew - is no longer necessary.
It runs Windows XP Home Edition and is not a Windows CD or disc of recovery of any kind.I have a Windows decal on the underside with the product key, but when I use "Belarc Advisor" to examine the product keys for all my software loaded it gives a totally different operating system product key! This key contains the letters OEM in there.
As the machine is supplied with a Toshiba power management software I guess it's an OEM Toshiba of the OS version I have.
My questions are:
1 / this does not mean that at some point in the past, this machine was another product of Windows XP on it? (two product keys)
2 / I can, (and), I get the Windows XP CD or a recovery for the machine, like I need to recover or to reload Windows.Thanks in advance to all members of the forum that meet.
> 1 / this does not mean that at some point in the past, this machine was another product of Windows XP on it? (two product keys)
The key you found at the bottom of the device belongs to the OEM of Windows version that is part of the recovery diskette.
The recovery disk is already enabled so that the key is not required in order to activate the Windows operating system.
As far as I know, that the key does not work with other versions of windows> 2 / I can, (and), I get the Windows XP CD or a recovery for the machine, like I need to recover or to reload Windows.
Since it is an old, I doubt you'd be able to order the recovery for this device disc
If you want to install the Win operating system, then you must use a Windows CD clean valid keys and all drivers may be downloaded from the page of European driver of Toshiba.
The drivers are placed in the archive because it oldie s in order to choose the archives in the type of product to download the form. -
Re: Two questions on the recovery of my Satellite C850 / 09L
Hello
I had an unfortunate accident with a drink and my C850 / 09L while in the hospital, and while he was cleaning that I used my external hard drive on an old computer.
Long story short, while making the usable drive I have in some way managed to make the unreadable UEFI and need a recovery disk to fix it (which I did not cause of course I was in the hospital when the laptop was given to me).
I have two questions:
(1) the recovery disk creator organize files in a specific way, or can I copy the whole partition on a USB flash drive and make it work?
and
(2) if I am able to use the recovery partition copied or obliged to buy a Toshiba drive, the recovery disk difficulty will be just the OS or it will wipe my files as well?
1 / recovery disc Creator create a special bootable media that can be used for the installation of laptop recovery image. If you want to install the recovery image, you MUST create this bootable media.
2 / Yes Yes please before you use it to backup all your important data.
If you have any other questions you are welcome.
-
two questions about the scattered images secure
I created an image that is secure and encrypted for sensitive documents.
I have two questions:
1. when I use the disk (if it is up, open and available), and I want to add something to it, I usually drag the file everywhere where it is currently in its destination folder in the sparse image control. But it automatically makes a copy - with the same name (not with a '-1' ever, not with a suffix 'copying' or 'alias'). Which defeats the purpose and makes things complicated - I find myself comparing what is in each location to make sure it's in the sparse image and then it makes me nervous to delete the original. Why it does this and how can I change such as dragging a file in a secure location gives there is not that a second copy of it left in an UNsecure location?
2. I'm using Time Machine backup drive sitting on my desk (and a separate utility for monthly clones on a different backup disk). Automatically makes Time Machine backup the content of the rare picture even if the safe drive is not mounted, open and available? I hope not, because that would undermine the usefulness of having a backup disk on my desktop running of ordinary Time Machine backups, but find it me just that all the steps I take of course I do not lose any data may be so overprotective I have thought/hoped.
Sous_forme_d' addendum, I'll check my clone, but as I put this out there, I wonder if SuperDuper!, my application of cloning is cloning automatically secure disk content, so... like the thoughts of anyone about it if it's an application that they use).
FYI: I'm running 10.11.2
Thank you.
(1) by default, OS X makes a copy with the overcoming of the limits of volume and moves when in the same volume.
You can reverse this behavior by holding down the command key when you drop. You will see the insignia of the icon changes (green + for copy, empty for move).
(2) Time Machine will return to the top of the image 'file', but only when it is unmounted. I do not think that it automatically includes the volume mounted, but I would like to check and add to the exclusion list.
-
Two questions on the HP Envy 700-230ea before you buy
I am looking to buy a HP Envy 700-230ea of PC World. The plug that I saw didn't quite answer two questions that I have to solve before committing myself.
1. the operating system is Windows 8.1 installed the 64 bit version (I need it to be)
2. the machine is supplied with a 2 TB HARD drive. But I need to add a second 2 TB HDD. Is it possible to do it in the machine?
On your HP UK Site, I would say that it comes with 8.1 / 64 bit and it has 3 internal hard drive bays; 2 external optical drive bays.
Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab
Be forewarned of desktop computers HP ENVY do not come with a manual, just quick pictorial international owners set up guides, and there are no available records. The Windows 8.1 operating system can control, but for the computer itself no manual, it's like buying a new car, try to understand all the switches, levers and lights. Most are easy to understand, but some are not but I would like to contact PC World and make sure he has the 64 bit OS.
Link http://www8.hp.com/uk/en/products/desktops/product-detail.html?oid=6753464#! % 3Dspecs tab
-
Two questions regarding the restoration of the system.
If you restore a computer to the factoy setting, it should get rid of any virus or spyware that is on this computer?
Is it normal that the text and graphics to appear a bit odd during the restoration of the system, it seems that the resolution is not terrible.
Thanks in advance.
Hello
There are some malicious programs that can survive even a format and a facility so if your restoration or
Recovery has been infected certainly the malware might still be in the game. Did you use a Restore Point
who she returned to a shortwhile ago, or do a restore to the new factory
installation? A restoration is most likely still infected only once.The video driver may need to be updated.
This is my generic how updates of appropriate driver:
This utility, it is easy see which versions are loaded:
-Free - DriverView utility displays the list of all device drivers currently loaded on your system.
For each driver in the list, additional useful information is displayed: load address of the driver,
Description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel - device - Graphics Manager - note the brand and complete model
your video card - double - tab of the driver - write version information. Now, click on update
Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
Uninstall - REBOOT it will refresh the driver stack.Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
with their own software and drivers and all other main drivers that you have.Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
BIOS, Chipset and software updates on the site of the manufacturer of the system here.)Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
each installation.Always check in the Device Manager - drivers tab to be sure the version you actually install
presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
in particular that) so to install a driver - reboot - check that it is installed and repeat as
necessary.Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmHow to install a device driver in Vista Device Manager
http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.htmlIf you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
Updates, that leaves about Windows updates but it will not install the drivers that will be generally
older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
get new manually if you wish.How to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx===========================
If you need to search for malware:
No one program cannot be used to detect and remove any malware. Added that often easy to
detect malware is often accompanied by a much more difficult to detect and remove the payload. If its
better to be too full now than to pay the price much later. Check with these extreme
Overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits
UnHackMe execution)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can download
It's here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs.
It is a single scanner, VERY EFFICIENT, if it finds something to come back here or use Google to see
How to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses,
Trojan horses, rootkits, etc.). that has infected your computer despite all security measures that you have
taken (such as the anti-virus software, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
http://OneCare.live.com/site/en-us/default.htm
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also do to the General corruption of cleaning and repair/replace damaged/missing system files.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Two questions about the export to EPUB...
I have a document I want to set up as an epub. This is a book for children, so I need to do two things that it does not currently when I export.
1. I need the text remains on the image associated with it. Is there a way to anchor the text to an image, so it never leaves this image, even when the text resizes?
2. There are some sounds and animations that are currently available on each page. Those used to EPUB, because, so far, they disappear when I export in this format?
Thanks for your help.
Kevin
1. the text and the image of the Group and make then anchored object.
2. don't know what to do with that with CS5, but you should be aware that the use of audio and video in epub is very limited at present.
For the work of the Epub, you're much better upgrade to CS5.5. In the meantime, I suggest a copy of the excellent Epub directly from Liz Castro to the Point of purchase: http://amzn.to/rqNwkp
and check videos of Anne-Marie Concepcion on Lynda.com. You can get a free one week trial using this link: http://bit.ly/fcGpiI
Bob
-
Two questions on the same blade
Hello
I'm developing a questionnaire of type on Captivate 4. I have a section where he first asks the user a yes / no question, and then teaches them to type in an explanation if they chose 'yes '. I also need this work so that the two question-answers (Yes/No and the answer text) the spokesperson of the LMS/Email report.
For example - the first question is ' is it a complementary training you feel you still need? "-which the user must select 'Yes' or «» Then directly below it is written "If Yes, please explain what kind of training you need" - giving the user a text box to type in their answer.
I know I can do this by adding two 1) Yes/No type question, question of type 2) short answer questions. But the trouble with this is that these two appear on two blades (which is not great for the user).
Is there a way to get these two questions (or interaction) on the same blade? As always... any advice would be much appreciated
Hello
It's possible, if you are ready to use variables and advanced actions where you create the question slide totally. Maybe is easy to imitate the workflow you ask, by duplicating the YES/no slide of short answer Question No response in a text caption (you can add) to a default value. I'll try to explain:
- You create a true/false question slide and be sure that there is enough space left under the answer
- You create a short answer question, but reorganize this question and add a text caption. In this TC, you will have the answer that appears when access to this slide.
- If the answer is Yes, go to the second slide, where you show the Yes. If the answer is no, jump elsewhere
Even if you still Question two slides, normally the user will not be aware.
Lilybiri
-
Two questions regarding the installation of Windows 2003 on UCS - C C220 M3
Hi, I'm trying to do the same procedure as the video below to install a Windows 2003 server in UCS - C 220 M3 with UCSC 2008 M - 8i SAS RAID. This server is managed by the Manager of the UCS 2.2(3g)
https://supportforums.Cisco.com/video/11927946/how-install-Windows-2003-...
But the video quality is very bad.
Can someone help me with 02 questions on this procedure?
(01) this software has been used to simulate the floppy?
(02) the image (.img) file that she used was extracted from the UCS DVD ISO Drivers orI can't find a direct .img file in the downloads of Cisco?
Thanks in advance
My best regards,
André Lomonaco
André,
I think she just used any emulator floppy and .img file, I didn't have a change to watch the entire video, so I don't know what a .img can be useful for...
Note that Windows 2003 is not supported on this server with this firmware, so you won't find the proper drivers everywhere in cisco.com and also Microsoft's support in his favor on July 14 this year so unless there is a laboratory where unexpected behaviors can be granted, I would not install on C220-M3.
-Kenny
-
Hello
I just hope someone can explain source of default icons on the start menu in windows 7. NOT all PROGRAMS MENU but just START :-)
I know that I can pin itmes him etc... purpose what I wondered, is how windows know which items to always be listed as soon as a user clicks start. Do not start and then all programs. I know that to get something else listed in the start menu, all programs, all I have to do is add the item in the menu c:\programdata\microsoft\windows\start but this isn't what I want. I want to use to display a specific item by simply clicking Start.
From now for all users when they click Start they see magnifying glass, paint, fax, scan, reminder, connect you to a projector and started my is so... where question not windows this information from and how do I add to it for all users and not only one. I know how to do for a single individual.
Thank you.
Unfortunately, it's only for an individual options on the start menu. I tried to see if the same options exist somewhere else to affect all users, but to no avail.
I think I have to be stuck with the update in the directory that I listed above and they will have to click on start, all programs instead of just starting.
But more ideas are appreciated :-)
-
Question of the unique constraint with finance charge
Hi friends,
As part of the implementation of 11 g BIAPPS-ODI during the execution of a finance charge is my load of CM plan failed with the error like below
ODI-1519: series step 'Load start Plan (InternalID:1242500)' failed because step 'Refresh Global Variable (InternalID:1243500)' child is in error.
ODI-1519: series step 'Refresh Global Variable (InternalID:1243500)' failed because the step child "Warehouse loading Phase (InternalID:2336500)" is a mistake.
ODI-1519: series step "Warehouse loading Phase (InternalID:2336500)" failed because the child step "SIL 1 charge (InternalID:2337500)" is a mistake.
ODI-1519: series step '1 SIL Load (InternalID:2337500)' failed, because the child step '2 group of dimensions of SIL (InternalID:2338500)' is a mistake.
ODI-1519: series step '2 group of dimensions of SIL (InternalID:2338500)' failed because the child step "Parallels - independent DimGroup (InternalID:2346500)" is a mistake.
ODI-1518: parallel step 'Parallels - independent DimGroup (InternalID:2346500)' failed. level of 1 child by mistake, which is more than the maximum number of allowed errors (0) defined for parallel step. Has no measures of the child: 3 SIL Dims POSHIER_DIM (InternalID:2369500)
ODI-1519: series step '3 SIL Dims POSHIER_DIM (InternalID:2369500)' failed because the child "POSHIER_DIM (InternalID:2372500)" is a mistake.
ODI-1519: series step "POSHIER_DIM (InternalID:2372500)" failed because step "SIL_PositionDimensionHierarchy (InternalID:2377500)" child is in error.
ODI-1217: SILOS_SIL_POSITIONDIMENSIONHIERARCHY Session (4278500) fails with return code 1.
ODI-1226: SIL_PositionDimensionHierarchy.W_POSITION_DH step fails after 1 attempt.
ODI-1240: Flow Run SIL_PositionDimensionHierarchy.W_POSITION_DH fails during an operation of integration. This flow of charge table target W_POSITION_DH.
ODI-1228: SIL_PositionDimensionHierarchy.W_POSITION_DH (integration) of the task fails when connecting ORACLE target BIAPPS_DW.
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV_DW. W_POSITION_DH_U2) violated
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:462)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:405)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:931)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:481)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:205)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:548)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:217)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1115)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1488)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3769)
at oracle.jdbc.driver.OraclePreparedStatement.execute(OraclePreparedStatement.java:3954)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.execute(OraclePreparedStatementWrapper.java:1539)
at oracle.odi.runtime.agent.execution.sql.SQLCommand.execute(SQLCommand.java:163)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:102)
at oracle.odi.runtime.agent.execution.sql.SQLExecutor.execute(SQLExecutor.java:1)
at oracle.odi.runtime.agent.execution.TaskExecutionHandler.handleTask(TaskExecutionHandler.java:50)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.processTask(SnpSessTaskSql.java:2913)
at com.sunopsis.dwg.dbobj.SnpSessTaskSql.treatTask(SnpSessTaskSql.java:2625)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatAttachedTasks(SnpSessStep.java:577)
at com.sunopsis.dwg.dbobj.SnpSessStep.treatSessStep(SnpSessStep.java:468)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:2093)
at com.sunopsis.dwg.dbobj.SnpSession.treatSession(SnpSession.java:1895)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ 2.doAction(StartScenRequestProcessor.java:580)
at oracle.odi.core.persistence.dwgobject.DwgObjectTemplate.execute(DwgObjectTemplate.java:216)
at oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor.doProcessStartScenTask(StartScenRequestProcessor.java:512)
to oracle.odi.runtime.agent.processor.impl.StartScenRequestProcessor$ StartScenTask.doExecute (StartScenRequestProcessor.java:1068)
at oracle.odi.runtime.agent.processor.task.AgentTask.execute(AgentTask.java:137)
to oracle.odi.runtime.agent.support.DefaultAgentTaskExecutor$ 2.run(DefaultAgentTaskExecutor.java:82)
at java.lang.Thread.run(Thread.java:662)
How to solve the question above using ODI 11 g. I'm using Oracle ERP R12.1.3 as a source of data for this.
Thanks in advance.
Kind regards
Saro
What is the result of a query on table W_POSITION_DH or W_POSITION_D duplicate?
Naeem
Maybe you are looking for
-
6 Installing iPhone iPhone screen protector 7.
IPhone screen protection 6 will fit the iphone 7? I know that they are similar in size.
-
I just installed the latest version of fire fox and tells me when I return to the home page that I am not on the latest version. I save the version in my downloads first, and then I ran it.
-
Defy 2.2.2 - no pictures of the camera when the flash fires
After the last update 2.2.2 I see the following problem: when the flash goes off while taking a picture, the result is a completely black image. she faces no flash photo is fine. Please notify. I restarted the phone, but it does not help.
-
Impossible to rename folders on Vista Home Premium 32-bit
I can create a new folder in Explore, but impossible to rename. My research indicates this is probably an error in registry, would have been in this key: HKEY_LOCAL_MACHINE\SOFTWARE\MICROSOFT\WINDOWS\CURRENTVERSION\EXPLORER\FOLDER_DESCRIPTIONS.When
-
sercurity Windows Update error code 80072F78 failure help under attack
I cannot download the updates of windows important sercurity, 11 updates, windows vista 6 windows defender 1 office 2007 4, displays error code 80072F78, cannot find a solution need help my computor get daily attacks.