Two video channels

Similar Questions

• Another issue: there is a way to apply different video channels to program different monitors?

  I'm editing a wedding ceremony. There are two cameras on the couple in different angles, and there's a camera roaming the Church for the detais on the audience. I synchronize in a sequence, cut the fragile parts on the roaming camera and I alternate between the two cameras. I don't see what is behind the layer hierarchy, so I disable its visualization in itself what happens on other devices, and it's quite unpratical.

  So, how to do? To make an extract from the different outputs for different video channels on the same sequence?

  Editing MultiCam Mode is something, you may want to consider.

  There are tutorials for it.

• the pairing of two videos into one with IMovie

  I use two video cameras of hockey my son, one at each end of the ice (i.e. GOPROS) I am able to come down don't load the videos, no problem, however I can't seem to figure out how to take the two videos & match early in the game, and then select what video shows action better? I've seen other programs to match the two videos on top of the other and then (toggles between each video) to make a great film. Is this possible using IMovie?

  It is only provided for by professional non-linear editing (NLE), programs such as Final cut Pro where multiple injections of the same event, called "angles" can be combined into "composed of clips.

  In iMovie, you could put the video that has the best sound in the timeline panel, and then put the fragments of the other above (this picture in picture) video.  When you play, you will hear two sound tracks, but you can use these to manually move these fragments until in sync with the main video.  You can also use the waveforms on a time scale of timeline extended to help with this.  When close enough, you can increase the volume of the audio fragments to zero or detach and remove them.  It will be quite a lot of time and this is what can be done automatically in professional NLE.

  Note that it is possible to try Final Cut Pro for free for a month.  The layout of the interface is quite similar to iMovie.

  Geoff.

• Help! me that my last two videos don't share :((

  Hello and Goodmorning! I am looking for help on how to save my last two videos of the final cut pro x trial. Before its expiration, I tried sharing videos nothing happens, how do I get these two videos safely be 'shared' on my computer.

  I tried to share it on youtube then master file and same email, but nothing came through.

  If you can guide me through the steps that would be very appreciated thanks geek guys!

  What is going on? You get an error message? Are there warning alerts or icons of camera on your thumbnails of clip or events?

  Russ

• How can I combine the two videos in one video in iTunes?

  I was wondering how can I merge two videos into one on iTunes. I don't know how I can merge. Can you please show me how to merge the videos so I can add the video to my iPod? Thank you

  iTunes can connect two videos. iMovie for iOS on iPod touch may be able to do it for you according to the format. Otherwise, there is a sequel called FreeStudio which probably has a tool for the job.

  TT2

• Comparing two digital channels or waveform

  Hello

  How to compare two digital channels or the y-axis of the same lengths waveform channels and find the line that has about the same value in the channels. For example, suppose we have two digital channels X and Y which has about the same value in line 15. I need to write a script to find out in which line the canals coincide.

  Kind regards

  X.Ignatius

  Hi X.Ignatius,

  I subtract channels and use the CHNFIND function to search for string values that are zero or nearly zero.

  Greetings

  Walter

• With the help of two CAN channels on cRIO with 9853

  I have a cRIO 9014 controller RT and 9112 chassis and a CAN Module 9853.  I used successfully CAN receive and channel CAN Transmit example projects to check the work of material.  Then, I took two screws FPGAS of each project and grouped in a single FPGA VI by copying just the two in the same VI.  I can correctly transmit and receive with the host live

  My goal now is to be able to use the two CAN channels on the module 9853 for transmitting and receiving CAN Messages on each channel.  I like to use in a project in hybrid Mode later, so I think that there is only a single DMA channel available after that Scan Engine takes 2.  Maybe that's why I get an error when I make a copy of everything in the FPGA VI, make a new FIFO and make copies renowned host of screws with different names of variables to match the copied content from FPGA VI.

  Any other ideas on how to proceed would be appreciated.

  Also, I know that CAN1 needs an external power supply, so it is no more a problem.

  Thank you

  John

  I thought about it, I don't know why, but some parts with part 'FPGA to receive channel CAN' in their own lines fixed.  Now CAN receive is as fast as can be, never drop frames or overflowing the FIFO.  He also compiled FPGA Bitfile 30% faster and was about 50% less use of the device.  Weird...

  If you're curious, here's the new VI:

  

  John

• I wish to see the two VIDEOS next to them playing at the same time, one on the left, the other on the right without the video image is compressed.

  I wish to see the two VIDEOS next to them playing at the same time, one on the left, the other on the right without the video image is compressed. I also need to use the effect to shoot a video of 270 degrees. Please don't tell me to download rehanfx it does not work with this effect. Then someone could provide me a way to what's going on? Since this split-screen is also popular then why isn't just a default thing on movie maker?

  You will need to get a software that is able to do this.

• Wmoviemaker has a feature that would play two videos side by side on one screen?

  Wmoviemaker has a feature that would play two videos side by side on one screen?
  If Yes, could someone please tell me how? Is not, then... Well well... :((

  Hello

  I'm afraid to inform you that we do not play two videos in Windows Movie Maker on a single screen.

  For your reference: Learn more about Windows Movie Maker.

  http://Windows.Microsoft.com/en-us/Windows-Vista/getting-started-with-Windows-Movie-Maker

   
  Work with clips in Windows Movie Maker
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker
   
  Make a movie in four simple steps
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/make-a-movie-in-four-simple-steps

  Hope this information is useful.

• I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  I have two videos that I would like to combine. But the audio part of the second video is delayed, how can I change so that audio and Visual are equal. IM using windows live movie maker. Thank you

  Hello hodginswill,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Movie Maker and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  https://windowslivehelp.com/product.aspx?ProductID=5

• If you have two video layers, how did you composite the bottom of the top layer in the layer below mate in Premiere Pro?

  If you have two video layers, how did you composite the bottom of the top layer in the layer below mate in Premiere Pro?

  You have an element that contains the matte and the other clip contains the filling?

  Put the matte clip on a track directly above the clip to fill.

  Go to the effects Panel > video effects > Keying > overlay cache track and apply the overlay cache track for your video of filling on the timeline.

  Ensure that this clip is selected in the timeline panel and then go to the effect controls panel, whirlpool open orders the overlay to cover track by clicking on the triangle next the the name of the effect and Matte together: to the video track containing the Matte Clip.

  MtD

• Is it possible to separate a video stream into two video streams?

  I do not know how to ask this question with keywords, but I essentially have the opposite problem to superimpose two videos in one. I use OBS to capture a stream video computer game and a webcam to feed at the same time. However, my webcam stream is lagging behind my video stream of the computer. I want to reframe the section video (somehow) webcam and manipulate separately from the video game.

  Thus, the videos are superimposed by the SIB program

  

  I don't know if it is even possible to create and manipulate two videos of a video like this, but any guidance would be appreciated. Thank you!

  If I understand correctly, you want to keep the webcam shot overlay, but just change the "timing" to synchronize the webcam with gameplay, right?

  Equip your video clip V1. Put SAME clip V2. Apply the CROP effect to clip V2 and harvest all the 4 side down until you have just the small webcam PiP showing (disable V1 clip temporarily to see what you're actually cropping on V2).

  Now pass the V2 clip left or right on the timeline as necessary to implement synchronization with the V1 (gameplay) clip. Fact

  Thank you

  Jeff Pulera

  Safe Harbor computers

• How to stop a freeze on transition framing between two video clips?

  Hi all

  Newbiee here

  How to stop a freeze on transition framing between two video clips?

  Cheers for your help in advance.

  Make sure that your clips have long enough 'handles', extra material before and after the change, the less both the duration of the transition.

• URGENT - Data rate "TOO HIGH FAILURE" - BUT this isn't the two videos, it takes 9 subtitles tracks! Help, please!

  I'm a standard definition DVD authoring using Encore CS6. I imported two videos high definition (1920 x 1080) (63 min and 4 min.) directly to a calendar. There are 9 subtitles.

  I have converted video high-def exactly like these while encoding several times with success. I use this custom setting: Codec: MPEG2 - quality: 5 - VBR 2 pass - Progressive - Min BR: 7.2 - target BR: 8, Max BR: 9 - 23.96 EN matches source. Due to the fact that I used this predetermined dozens of times, I don't think lowering the Min, the target or the Max BR is going to solve the problem of data failure rate.

  I am inclined to believe it's 9 subtitles after that review "Data rate too high failure" messages here.

  As ALWAYS, I'm on a deadline to customer.

  Okay, this preset has always worked in the past, but I would have thought you were pushing things with him.  Subtitles can be the proverbial drop of water!

  I had problems in the past with that high bit rates and also during the definition of quality to 5, instead of 4.  For example, I always use 4 quality and will never more than 7 for target BR.  Even with these settings, I had problems earlier this year with a chronology which contained a series of 20 JPEG images - there were always reluctant to the second jpeg, and I had to down to 6.5 before it was OK.

  Have you tried a lower BR?

• How to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS

  Does anyone know if this is possible: how to DIVIDE a TRACK STEREO L & R CHANNELS INTO TWO MONO CHANNELS?  There must be a way, but I can't find how.

  I recorded a podcast - me and a guest, with each microphone goes to its own mono channel. When I opened it in hearing he mixes in a stereo channel.

  Thanks in advance for any help.

  Best,

  Shawn

  Once you have opened the file in the waveform editing view go to menu Edit "excerpt from the channels to mono files.