two virtual centres themselves appearing

Similar Questions

• one or two virtual centres?

  Some information went around that there is a limit of computer virtual in Virtual Center of about 2000 vm. Not sure if this is true or not, but if we consolidate the two virtual centres, we currently we will be well on this brand of 2000, if it's a real limit.

  someone has an opinion, if we had to keep two virtual centres or consolidate one if the number of vm will have more than 2000 servers?

  Yes it's true

  200 ESX and VM 2000

  vi3_esx35_vc25_rel_notes.html

  "Management of up to 200 guests and computers 2000 virtual-VirtualCenter 2.5 can handle more hosts and virtual machines than in previous versions, the ease of management of the virtual data center scaling to up to 200 hosts and VMS 2000. [vi3_esx35_vc25_rel_notes.html |] http://www.vmware.com/support/vi3/doc/vi3_esx35_vc25_rel_notes.html]

• I just bought two photos, but only appear in my library - why?

  I just bought two photos, but only appear in my library - why?

  Follow these steps: I downloaded my 10 free images and they all have the Adobe watermark on them, so I can't use them. Why do they have a watermark on them?

• Try to copy one virtual centre to the other clusters

  Hello

  I'm new in the world of windows and have to migrate a virtual centre 5.1 older than 5.5.  I'm running into a problem with the copy of the clusters of the virtual center more a new using powercli and hoped someone on this list can help you.  Here's what I'm trying to do:

  (please let me know if there is a way better to clone the cluster information to one virtual centre to another)

  --

  $SourceClusters = get-Datacenter RWC - vc01 Server | Get-Cluster-Server vc01

  {foreach ($SourceCluster to $SourceClusters)

  New-Cluster - name $SourceCluster.Name - location "RWC" - Server vc02 - DRSEnabled - DRSautomationlevel "PartiallyAutomated" - confirm: $false

  }

  --

  However when I run the present I get the following error messages:

  (a) not found VIContainer with name RWC - which I know exists and is my Datacenter name

  (b) setting New-Cluster VIContainer: did not find any object specified by its name.  I know that the first command get-data center returns valid cluster name so don't know why it shows as empty.

  All that I'm missing here.

  Thank you

  SIM-

  Hey Sim,.

  They is a so-called "adventure", named InventorySnapshot, that does exactly what you want: https://labs.vmware.com/flings/inventorysnapshot

  It is worth the visit.

  Tim

• back-to-back connection between two virtual machines on different ESXi servers

  Assume that a name of Virtual Machine VM1 is on ESXi Server 1 and Virtual Machine name is VM2 exist on ESXi Server 2.

  We can configure two Virtual Machines back to back as connect us two physical machine back to back via cross cable. is this possible?

  Sorry for typo's fault, should be separated vswitch, with dedicated physical network card adapter

• Same IP in two virtual machines of vCOps TIME

  Hello

  I developed vCOPs v5.8.1.0. In the deployment of VAPP Wizard, I have selected the fixed option for IP addresses and gave two IPs previously reserved to the virtual machines. After deployment, the paralytic has been started. But I noticed some problems to connect to the user interface. After a minute, I noticed that two virtual computers have the same IP address. I have reviewed screenshots, and I conclude that the automatic configuration of VAPP worked well.

  Someone knows the same behavior? Ideas to avoid a second deployment failed?

  Kind regards

  Fernando

  Hello

  I solved the problem: delte and redeploy.

  Kind regards

  Fernando

• Two virtual machines running on a same PC network

  Hi all:

  I'm running both SUSE Linux Virtual Machines (VM) with VMPlayer on a PC with Windows server 2008. The two virtual machines are configured to the bridge at the same host physical ethernet port (bridge mode). Started the first virtual machine can access the network without problem, but the second VM started not. The order from VM has been changed in order to check if it was a configuration problem on one of the virtual machine, but according to the virtual machine that is launched in the first place seems if appropriate switch VMnet0 and block access to the second VM. Defined for each virtual computer LANs are different: 10.2.1.0/24 for a VM and 10.4.1.0/24 for the other.

  Any help will be really appreciated

  Case resolved, I realize that he had a message waiting in the toolbar of VMware by saying * adapter Ethernet0 do not have network connectivity. MAC 00 address: 0C: 29:58:61:19 adapter Ethernet0 is located between reserved address or is being used by another virtual card on your system. *. I just checked on google and found an identical case on the VMware communities with the solution: http://communities.vmware.com/thread/269465?start=0&tstart=0. To make the story short my VMs have been duplicated and used the same MAC address. So just stop a virtual machine and generate a new MAC for him in settings-> settings-> Advance-> ECS

• Help to connect two virtual machines to internal network

  Hi all

  I have 9 of VMware Workstation, and I installed two identical WinXP VMs. I put them both on the same custom netowrk (VMnet3) setting. In the virtual network on my Win7 host editor I updated VMnet3 'Host-only (connect VMs internally in a private network)', and I have left empty the box "Connect an adapter to the virtual host to this network".

  What I'm trying to do is to connect the two virtual WinXP only between them, a small connection internal, so that a VM could ping on the other virtual computer, but cannot connect to my Win7 (real internet) host.

  Now both show WinXP that they are connected (the icon of the internet with two small screens is there), and they both have an IP assigned. However, does not ping one of them to another IP address.

  Any ideas?

  Thank you!

  Jonathan

  Firewall is turn on the Windows XP machine?

• upgrade of the virtual Centre of 4.1.0 to version 5

  I need to improve our virtual 4.1.0 to version 5 Center and wanted to know if there was a guide of best practices?

  Our current virtual centre is a virtual machine and before upgrading would obviously save database snapshot and virtual machine in case everything that can happen in the process of upgrading

  Any feed back would be gladly appreciated

  Welcome to the community - here is a link to the official upgrade guide that will make you scroll through the process and identify the requirements - http://pubs.vmware.com/vsphere-50/topic/com.vmware.ICbase/PDF/vsphere-esxi-vcenter-server-50-upgrade-guide.pdf

• Two virtual machines on the same vSwitch

  If two virtual machines are on the same virtual switch, will they still send packets on the physical wire when talking to each other?

  It was my understanding that they would not send all packages and contain just the vSwitch traffic but I would just check that.  If they are not, is it possible to configure it so that they do.

  Thank you.

  Given that the vSwitches are not connected to each other, you need physical uplinks.

  André

• Two virtual machines share the same physical network adapter

  I have a virtual network adapter that I linked to a physical network adapter on my box where two virtual machines are running.

  I assigned two virtual machines to this vmnet adapter.

  On one I can ping other machines of physics on the same subnet as the physical computer, but the other VM can ping only other virtual machines.

  When I try to ping from one physical computer to this virtual machine I get the error message windows "ping transmission has failed. General failure. ».

  Is what I'm trying to are not not possible?

  First thing to do is to ensure the automatic bypass is enabled disabled in the VMnet virtual network editor your use to the bridge to.

  Second need to see the output of ipconfig/all on the Windows host and guests and or ifconfig on the Linux host and or guests.

  DO NOT copy and paste the output directly in the body of the response rather redirect the output of the commands in a text file and then archive (compress) files in a single zip archive and attach it to an answer.

  You can use the following example:

  Under Windows:

  ipconfig/all > "% USERPROFILE%\Desktop\host_ipconfig.txt".

  ipconfig/all > "%USERPROFILE%\Desktop\guest (n) _ipconfig.txt".

  Linux:

  ifconfig > ~/Desktop/host_ipconfig.txt

  ifconfig > ~/Desktop/guest (n) _ipconfig.txt

  Also include in the archive .zip .vmx and vmware*.log for two Virtual Machines configuration files.

• Import/export script alarms between VC or synchronize alarms between 2 virtual centres

  Hello:

  I wonder if there is a way to sync alarms between 2 virtual centres?

  Or for example, how to export all the alarms of a VC and their import to another? Is this possible?

  Any help would be really appreciated.

  Thank you very much!

  The following script will remove all alarms on al visible features

  $alarmManager = Get-View AlarmManager
  $alarms = $alarmManager.GetAlarm($null)
  $alarms | %{
       $alarm = Get-View $_
       $alarm.RemoveAlarm()
  }
  

  Note that this does not remove the alarms on the entities hidden like data centers, the host and the vm.

  And please test in an environment out of production first!

  There is no way to recover a deleted alarm.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• How to make a submission even as RDM for two Virtual Machines

  Hi I have a question.

  We have a server ESX4.0 with two Virtual Machines running on it. I presented a 100 GB of SAN storage to this particular ESX host, this storage space must be shared between two virtual machines as RDM.

  But when I add this storage on a computer virtual as RDM, it does not allow me to present the same storage another VM, of RDM is displayed under the name hidden. Is it possible to do so.

  Kind regards

  Khurram Shahzad

  This is only possible with the MSCS clustering functionality.  With the same logic unit or disc number to multiple hosts without clusting will damage the volume of data / as the new system will try to initialize the disk.

  Your RDM may also need to be in virtual compatibility mode to do this.

  The guide of vmware on clustering with MSCS and there should be information about it.

• You can force two virtual machines to run on different hosts?

  I'm looking to see if we can score two virtual machines to never run on the same host as the other. I thought I had seen this ability in later documentation but can't find it now.

  Thanks for any help!

  Hello.

  If you use the DRS, then you can use a rule of DRS 'separate virtual machines.  Go to the Cluster settings, change, then see the VMware DRS-> section to implement rules.

  Good luck!

• Two virtual machines to communicate with each other - intent an SMS Lab for test deployment?

  Hi friends ,.

  I am a new user and would like your help pretty desperately. The scenario is that I want to implement a SMS Lab to deploy the application from the server to a client and test the application. I have all the necessary knowledge to the packaging of application is concerned, and would like to help as much as VMWare is concerned.

  I created two virtual machines and one of them will be configured as a server and the other will be the client. I created a team with these two machines in it. I am trying to ping from one machine to the other and its does not work. I only use the method of configuration host. The idea is simply to make the two systems communicate so that I can finish the entire configuration and use the same SMS deployment lab.

  -First of all, I'm new to all this so I would like to know whther to everything I do is correct and what is the largest possible?

  -What I have to do something else to make sure that those two communicate about someother or any other configuration software is necessary?

  I would like to ask you guys to be a little more specific are you when you help others that I need you guys ore than a person who is used to working on VMWare.

  And just so you know if it helps, I use VMWare Workstation 6.0.

  What you are doing is reasonable.  Both of your virtual machines have an IP address on the same subnet?  In general, the scenarios no-ping, the first thing to check is the firewall in the guest computers.  Have you checked that allows ping traffic?  If it is disabled?

  -KjB

  VMware vExpert