Txt-text file

Hello

I have a VI that saves a cluster 2 1 table in a txt file.

However, all data are written in 1 column, how can I change my VI so that when the data reaches - 0.061901, next line (0.000000) should start another column instead of continue on the next line.

And also, how can I add a title on two columns?

1. you must transpose the 2D data table.

2. in addition, change the 'delimiter' 'End of Line' to 'comma', will help you write a CSV file, which can be opened in Excel.

3. your can add the header manually.

Tags: NI Software

Similar Questions

  • Can not read the text file: 7 error file not found

    Hello

    I read a (header.txt) text file that is placed in the same directory as the vi. I use winXP & Labview 8.6. The VI reported an error:

    Error 7 open/create/replace the file in OpenTextFile.vi.

    However, I copied the path of the file at the end of the error message and pasted into the address bar of IE, and I found that IE can open the file.

    Why does this work?

    Thank you

    Ryan

    Never mind. I solved it. I fed the wrong file name in the diagram.

  • High Score Table: writing a Simple with Flash and PHP text file

    I'm having a problem getting Flash to work with PHP that I need Flash to read and write to a text file on a server to store data simple name partition for a games Hi score table. I can read the text file in Flash fairly easily, but I also have to write to the file when a new high score is reached, so I need to use PHP to do that. Can I send data from flash to php by POST file, but so far it does not. The PHP file is confirmed that the work that I added an echo in the file that displays a message to verify that the server is running PHP - files were also uploaded to a remote server so I could test them correctly. Flash code is as follows:

    FileWriter php

    var myLV = new LoadVars();

    sendData() {} function

    //sets variable 'hsdata' to send to php

    myLV.hsdata = myText;

    myLV.send ("hiscores.php");

    }

    I believe that it sends the variable "myText" in the php file in a variable called 'hsdata' I want the php file to write to a text file. The mytext variable is just a long chain that has all of the partitions and the names in the scores. OK, XML would be best way to do it, but for the speed, I want to just get the basic features of work, so store a shot of simple text is sufficient for now. The PHP code that reads the Flash variable "hsdata" and wrote for the "scores.txt" text file is due to:

    <? PHP

    sets the variable to the data posted from flash

    $flashdata = $_POST ['hsdata'];

    File Manager opens the file and clears all content with arg w

    $fh = fopen ("scores.txt", "w");

    Adds data to the file

    fwrite ($fh, $flashdata);

    closes the file

    fclose ($fh);

    echo "php file works;

    ? >

    Any help with this would be greatly appreciated - once I get php to write text files simple I should be ok. Thank you.

    var outLV = new LoadVars();

    var inLV = new LoadVars();

    sendData() {} function

    outLV.hsdata = 'Hello from Flash';

    outLV.sendAndLoad ("http://www.mysite.com/hiscores/test23.php", inLV,"POST");

    }

    inLV.onLoad = {function (success)}

    If (success) {}

    sets the dynamic text box to show the variable sent by php

    statusTxt.text = this.phpmess;

    } else {}

    statusTxt.text = 'No Data Received';

    }

    };

    It works well and function of inLV.onLoad of the reports it receives data, but does not display the variable received from PHP. The PHP file is like this:

    <>

    $mytxt = $_POST ['hsdata'];

    $myfile = "test23.txt";

    $fh = fopen ($myfile, 'w');

    Adds data to the file

    fwrite ($fh, $mytxt);

    closes the file

    fclose ($fh);

    $mess = "Hello there php ';

    echo "phpmess =". "." $mess;

    ?>

  • Our clients have trouble downloading a text file (.txt) on our website version 33.0 (using a filestream);

    Our clients have trouble downloading a text file (.txt) on our site version 33.0 (using a filestream). It worked well in previous versions.

    The error message they get reads as follows:
    {name of file and download user path} not can be saved, because the source file could not be read.

    Thank you
    Mike

    It is an old relative to corrupted downloads (http://kb.mozillazine.org/Source_file_could_not_be_read) error message, but has become more widespread in Firefox 33.

    To make a long story short... before, if the server sent a response which was smaller than the specified size, the gap has been ignored and the download was considered to be very good. From Firefox 33, a file that is smaller than the specified size is considered as being damaged.

    This comment in the bug tracking system has more information: https://bugzilla.mozilla.org/show_bug.cgi?id=1083090#c8

  • AppleScript to delete a text file

    Hi, here is a job Applescript that lists the contents of a folder and its subfolders to a text file named 'file inventory. The problem, for example, is that if a subfolder is emptied of files, the list of his previous content is always indicated in the text of the inventory of the last time file that the script is run. So, I would delete all of the text in the file until it is written again. I searched and found this code and put my name of file in there, but I can't make it work.

    Any help will be appreciated.

    expressions of folklore ": folder files inventory.txt" value 0

    property file_id: null


                  tell application "Finder" for the value this_folder for folder 'movies' from disk 'files '.

    the value log_file_path to ": folder files Inventory.txt.

    file_id value to open access file log_file_path with write permission

    Try

    write ('Start' & (current date) & back) to file_id

    my do_subfolders (this_folder, "")

    write (back & return) to file_id

    file_id of close access

    say "finished".

    we error error message

    file_id of close access

    errMsg say

                  end try

    on do_subfolders (this_folder, name_prefix)

    say application 'Finder '.

    Journal name_prefix & string (name of this_folder)

    write (back & name_prefix & (name of this_folder) chain ) to file_id

    the value File_List for each file in this_folder

    Repeat with this_file in File_List

    Journal name_prefix & "" & string (name of this_file)

    write (back & name_prefix & "" & (name of this_file) chain ) to file_id

    end Repeat

    the value folder_list for each folder in this_folder

    Repeat with this_subfolder in folder_list

    my do_subfolders (this_subfolder, "" & name_prefix)

    end Repeat

    end say

    end do_subfolders

    You are on the right track, but set the folklore expressions takes the file reference that you have already opened, not the path text.

    so, since you open the file via:

    file_id value to open access file log_file_path with write permission

    the appropriate solution would be:

    file_id of the folklore of the value to 0

  • Is there a way to open the text files with arbitrary extensions?

    As part of the mobile platform iOS, is possible to open arbitrary text files that have an arbitrary extension?  For example, in the course of my work day, I meet regularly with plain text files that have an .out extension.  I'd love to be able to open these simply with iOS notes without renaming them in .txt.  I meet many of them and only need to do this for a few minutes, so take the time to rename them significantly adds both.

    On the desktop a BONE can generally "open with", then choose the application.   I'm looking for the equivalent in iOS.  Please note that to access the files on iOS is not a problem with icloud drive, dropbox, etc..  they just can not be opened easily.   Simple text editor, word processor not full blown.

    You will need a software that can handle the file.

    Usually the file management applications can manage any type of file.  I like the 5 Documents to Readdle, it can open almost anything.

    https://iTunes.Apple.com/us/app/documents-5-file-system-PDF/id364901807?Mt=8

    The equivalent of 'Open with' in the iOS is "open in", 'Share xxx' or even 'Copy To '.

    How to get to it, depends on where the file is located.

    ICloud drive for example, you can do open the file in a specific application by holding your finger on the icon of the file and by selecting more «...» "in the menu that appears, and then selecting"Share point... ". "and finally select an application from the list.

  • iCloud drive text files being opened with numbers

    Before, everything worked fine with text files (.txt files) I have in iCloud drive.

    A tap on iCloud drive and another click on a text file on my iPhone would open the file Notes.

    From some point on (I think I got the same text file open at the same time on my Mac and my iPhone) iCloud drive to text on my iPhone files are opened with numbers.

    Later, when I type a text file to the iCloud drive on my iPhone I have numbers open this file.

    When I press the information next to the name of text file icon, I get a screen of info saying at the top of the right page "open in numbers."

    I have the text file is a file in format (.rtf), there is no problem; Notes opens this file; and the Info screen, top right, for this file says nothing about the application that will open the file.

    This only happens on my iPhone; I have a 5 s, 64 GB, with the latest iOS 9.3.1

    On my Mac everything works fine.

    I tried a "Reset all settings" but that did not work.

    No idea of what is happening and how to fix?

    Even. .txt files will open in figures on iOS of the iCloud drive. Why is this and can it be changed?

  • I'm doing a script that takes a list of e-mail from a text file and then allow me to select a save as a string. I found some ways to get the path of the file, but I'm in check by pulling the list

    I found some ways to get the path of the file, but I am defeated by pulling the list from that. the function of the path get gives me the path as "Macintosh Users:: Documents: extractedb.txt (myUsername).

    What I can't understand is how to get a dialog box to display a list that represents the content in the text file, I need to change the contents of the text file, I need the box to show me what I chose and I want to save my selection as a single string.
    e '.

    example of extractedb.txt information:

    [email protected]

    [email protected]

    [email protected]

    * has a random number of emails as well *.

    I want this is to pull those emails from the text file and turn them into a list so I can get to be a selection in my dialog box.

    Any help would be great = D

    Assuming you have a text file with your example e-mail addresses, the following AppleScript will read this file in a list (mf_List) and then use this list as input to choose among the list. Because multiple selection is allowed (control button), the output is sent to a list (sel_addr). We check if the Cancel button was pressed by testing for false and if this condition is met, we the script error.  Based on a single or multiple list item content of the list, display accordingly.

    game of mf to ((path to the folder as text) & "mail_list.txt")

    the value mf_List to {}

    the value sel_addr to {}

    the value mf_List to paragraphs of (read file mf)

    the value sel_addr to (choose from the list mf_List with title ¬

    ('Mail list' with multiple selections allowed without empty selection allowed)

    If sel_addr is equal to false then

    Error number-128

    return

    end if

    If length of sel_addr is equal to 1 then

    sel_addr display dialog box as text

    on the other

    the value Point to the text of TID to AppleScript delimiters

    the value Point text in AppleScript return delimiters

    display the dialog box elements of sel_addr in the text

    the value Text of point AppleScript delimiters to TID

    end if

    return

  • AppleScript - extraire extract values from a table, create a text file with these values

    Hello world

    Lets say I have a table that looks a bit like this

    And this table I would create 2 text files (or even more, depending on how many switchnames are there) who look a bit like these

    Is it still possible?

    I suppose to create a Service (which can be called in numbers) with Automator which includes an Applescript script - but - no idea since the script is not one of my strong suits.

    There is not need to be perfect, because tables are not necessarily the model presented above - so to tweek the script to the application will be necessary. The text files can be created/saved in the same folder as the file numbers is in.

    Y at - it script-genius out there?

    See you soon

    Florian

    Select the column of fist of the data, and then run this script by copying the Forum and paste it into the script editor.  The files will appear on the desktop

    say application "Numbers".

    say front document to tell the worksheet active

    say ( class is worn) fromfirst table whose selection range

    selectionRange defined in column 1 of the selection

    set cnt to 0

    the value destRange for range

    the value currentList to {}

    -the list of switches

    Repeat with acellule in selectionRange cells

    -say acellule to set the value on the NTC

    pass the value to the value of cell

    if and ((cnt > 0) (switch is not missing value) and (currentList is not contain switch)) then

    switch and the value in the currentList currentList

    end if

    NTC put to the cnt + 1

    end Repeat

    -Display dialog box "to the list of items is:" & currentList & "a list" & (currentList County) ".

    Repeat with aswitch in currentList

    " game textOut to '# Script generated with Applescript for switch' & aswitch &"

    # on "& (today's date) &"

    !

    conf t

    "

    set cnt to 0

    Repeat with acellule in selectionRange cells

    -say acellule to set the value on the NTC

    pass the value to the value of cell

    -Display dialog "aswitch is []" & aswitch & "] and switch is []" & switch & "]".

    if (aswitch contains the switch) then

    the value cellCol to address a column of first cell of acellule

    address of line of first cell value cellRow in of acellule

    value to the aport (value of the cell of the column (cellCol + 1) cellRow) integer

    the value vlan for the (value of the cell cellRow of column (cellCol + 2)) integer

    the value desc to the (value of the cell cellRow of column (cellCol + 3))

    " put to textOut textOut &.

    !

    "" IG 1/0 interface / "& aport &.

    switchport mode access

    switchport access vlan "" & vlan & ""

    Description LINK TO "" & desc & ""

    "

    on the other

    -Display dialog box "did not: []" & aswitch & "] and []" & switch & "]".

    end if

    NTC put to the cnt + 1

    end Repeat

    Set myFile to open for access (path to the Office as text) & aswitch & '_output.txt' the with write permission

    textOut write to myFile

    MyFile close access

    end Repeat

    end say

    end say

    end say

  • HOW CAN I SEND A TABLE TO A TEXT FILE

    Hello

    I have a table with a lot of values, and I need to transfer this table to a text file (.txt), without losing the position

    These values in the table. Can someone help me with this?

    THX

    Or you can use scripture to the worksheet File.vi

    ~ Jonathan

  • How to write graph of waveform data to text file with the option to the user to do

    So, I'm new to labview and will have bad to write a program in particular.  I have a waveform graph that runs for 120 seconds, generating a sine curve.  I am, however, having a time difficult get the program to write the x and are coordinated in a text file.  I've attached what I have so far.

    The first task I was assigned was to write a program that creates a curve of snusoidal on the front panel by adding a data point every half second for 120 seconds.  The plot should starts only if the user presses a button to start.

    The next part is to give the user an option to write the data generated in a file of worksheet called 'sine.txt '.  The file name and location should be hard-coded.  The file must contain the x and there contact information of each data point in columns separated by tabs, also known as the delimited.

    I spent several hours refining the attached program, and I can't seem to make it work right.  Any suggestions would be helpful at this stage.

    Sincerely,

    A student of chemistry frustrated whose research mentor is out of town

    First, you create files Excel.  You create text files.  And it seems that your writing on a file already created X (time) vs Y (curve of data) that is delimited by tabs.

    All you do is simply too complicated or a Rube Goldberg.

    All you need is the joint.

  • Average data from multiple text files

    I am new to labVIEW so any help is appreciated:

    I have a 100 txt files with two columns (separate tab) for a value of X and Y.

    I need the average of the values of Y to generate a single file and generate X against Y graph.

    So, how to read the data of these text files? (without having to select each one individually) and the average data and create a chart XY him?

    Thanks in advance

    There is a function to list folder in the palette of the file i/o that will return an array of file names.  Feed this table in a loop to open and read each file in turn.  Put in a new file, build a table with her, process the data or do whatever you want.

  • Dumping Variables in the text file, separate from the TS report

    Hi all

    I know that I can probably do this in TestStand using LabView, however, which is not a luxury that I have.

    What I'm trying to do is, when a failure occurs, empty a specific set of information in a separate (probably text file) log file share the standard test report.  For example, I could be followed by some tampons or test State of the equipment in stationglobals, when a test fails, I want to empty the part of the overall station in a different newspaper, once again, apart from test report, is it possible?

    Looks like the closest thing to research through TS and the support forums, I found is to use ActiveX calls to maybe MS Word or Excel and generate something there?  I was expecting something a little simpler?

    Kind regards

    Mike

    Hi Mike,.

    Try this:

    Write, method

    Syntax

    PropertyObject. Write (pathchaine, objectName, RWoptions)

    Goal

    Writes the content of an object in the file specified by pathchaine and associate it with the name specified by ObjectName with the object in the file.

    Remarks

    If you call this method on an object alias, TestStand generates the stream using the object to which the alias refers. This method does not include the Subproperty alias objects in the stream. See IsAliasObject for more information on the alias objects.

    Parameters

    pathchaine String

    [In] Pass the path of the file to which to write the data of the object.

    objectName String

    [In] Pass the name to associate with the object.

    RWoptions Both

    [In] Pass 0 to specify the default behavior, or pass one or more constants of ReadWriteOptions . Use the bitwise OR operator to specify multiple read/write options.

    For example, to make a statement in a sequence with local variables, and run:

    Locals.Write (C:\\temp\\Locals.txt","Locals",0" ")

    This will generate a text file containing the values of the local variables. You can use it on any object, but you will probably need to ask with the options to get what you want.

    I hope this helps.

    -Jack

  • How to find the largest number of text file

    I use the "Read from the text file" block to read the data in my .txt file in labview.  It is now in the string format.  I have a lot of numbers in the file.

    For example:

    0.45

    0.35

    0.12

    1,354

    1.56

    2.89

    5.89

    0.56

    That's what might look like a text file.  I want to find out which of these numbers is larger and do calculations with this number.  I have problems with channels/number/berries formats, etc.  Thank you

    Try to read that the file with File.vi reading worksheet with transposes the True value. Then use the table Max & Min to get the biggest number in the table.

    Lynn

  • Compare 2 text files data and output match

    Hi all

    I need some advice.

    First of all, in BinaryCode.txt data are thus:

    Replace BinaryCode0 1 0 0 0 0 0 0 0 0
    Replace 1 0 0 0 0 0 0 0 1 BinaryCode0
    Replace 1 1 1 0 1 1 1 1 1 BinaryCode1
    Replace BinaryCode1 1 0 0 0 0 0 0 0 0

    the first line of the text file is the header. So I need to check if the names in the second column (BinaryCode0 or BinaryCode1) appear in the Timed_Sets.txt file.

    Timed_Sets.txt data as such:

    BinaryCode0, 6, 40...
    BinaryCode0, 7: 40...
    BCName1, 0, 20...

    BCName1, 1, 20...

    For example, as BinaryCode0 is a match that I pulled out the line whole Timed_Set.txt in another table.

    I worked on a program, but I do not get the expected results.

    Text files and VI are attached.

    I appreciate your kind assistance in this matter.

    Thank you

    Concerning

    Kart

    If I understand what the output should be so what you essentially have to do is walk through the column for each unique value and BinaryCode.txt, pull the corresponding lines of Timed_Sets.txt. There are a variety of ways to do this, depending on the amount of data you have and whether or not you can use any kind of prior knowledge as to the actual content of the file (for example names of key search). It's a joint way. Modify if needed.

Maybe you are looking for