U2713H with the PS3 is a go?

Similar Questions

• Satellite A300 HDD work with the PS3

  Hello
  My cell phone charger does not work and I want to improve my ps3.
  The fact of the hd in the work of the a300 with ps3. If so how I get out?
  Cheers, Matty

  Hello

  PS3 uses HARD drive 2.5 SATA.
  I've also got PS3 and updated the 500 GB HARD drive.
  I used a SATA 2.5 HARD drive with 5400 RPM

  I guess the A300 uses SATA HDD too but I'm not sure about the speed

  So generally you can use this disk in the PS3

• Can you connect U3014 DELL to the PS3?

  OK, I have the old dell 3007wfp 30 '. I tried to connect my ps3 to the screen via hdmi/DVI. It did not work. I can't play either any Blu - ray movie via computer on this screen.

  Now, in the next 2 weeks, I plan to buy the new U3014 from DELL. I'm still very happy with my old dell 3007, but I also want to connect to the PS3.

  My question is can connect you the new dell monitor 30 ' to the PS3 and it allows to play games? I mean that the new screen has the hdmi connection, so maybe it works with the PS3? Can you also use it to watch Blu - Ray?

  The naturalness of 2560 x 1600 resolution can prevent connection and using the PS3 and watch Blu - ray or he makes the adjustment of hd resolution?

  The only reason why I'd buy this monitor is if I can connect to the PS3. Can any representative dell or Dell U3014 help me?

  Hi Mary,

  Dell U3014 comes with HDMI output and you should be able to connect with the PS3 to play games. However, you will need to connect external speakers to "Audio output" to get the sound output as there are no internal speakers in U3014. The monitor is capable of resolutions up to 2560 x 1600 and should be able to play Blu - ray videos without any hassles. You can refer to the technical specifications of the monitor available in Guide user here.

  I hope this helps. Answer please if you have any other questions.

• With the help of satellites LP500 - 14L as screen for PS3

  Hello, dear administration and all users; )
  I am really pleased to join this forum and hoping to get some useful experience with it :)

  Then. the question is in the topic... I'm just curious about it... In the eyes of the average user, it seems possible, PS3, and almost all modern laptops
  It is possible to have a HDMI output to plug into the PS3 for ordinary LCD... Why should not be the same with a laptop computer?

  I have red some post in different forums... and unfortunately it doesn't seem to be as simple as resembles.
  Some people say:
  (1) you can't do because laptop HDMI does not support the video entry
  (2) certain words, you can, but only with TV tuner and only with normal connection with 2 drivers, as readers DVD, older consoles are connected

  Both variants are unhappy :)), even for a second because probably quality picture going to be bad and not pleasant that when connecting PS3 via HDMI.

  Maybe someone can give a list what laptops support entry VIDEO for everyone to know. Mine is SATELLITE P500 - 14 L, it has 18 inches and I think it would be good to put on like a PS3 sometimes :)))

  > 1) you can't do because laptop HDMI does not support the video entry
  Just the phone cannot receive video signals from PS3 and this is the reason why you are unable to connect the PS3 to the laptop and use the internal display.

  I remember at the beginning Toshiba Qosmio G20 a video taken in charge by port (but not HDMI)
  Using this port you can connect an xbox and could use the internal display.

• Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hi im trying to media share with my ps3 and have two devices see each other, but my wmp allow me to click the allow for the sony device what can I do

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Take a look at the following article that may help you.

  http://community.us.PlayStation.com/message/2371488

  I recommend you contact Sony support teamfor further assistance.

• Some problems with the Dell U2713H monitor profiling

  I bought the Dell U2713H monitor.

  I can't find a lot of answers for profiling it. Company Dell does not have any instructions on this subject - so I think it's very bad.

  For example, I am interested in the following questions:

  I create profiles with ' Solution of Calibration Dell UltraSharp"and i1Display Pro.»

  They record the monitor LUT directly, or LUT-video card?

  Now I did 4 profiles, but it is not clear what profile using mode CAL1 oder CAL2 my monitor color space?

  For example. I made a profile with the color space sRGB, but I did not see it in any mode CAL1, CAL2 oder overall.

  Download and install them DA 1.5.3:
  http://www.Dell.com/support/home/us/en/19/drivers/DriversDetails?DriverID=VJVPH

  Then make sure that yout GPU does not apply "color improvements."

  Run DA and select calibration target and slot of calibration HW store. For example:

  -Preset: sRGB, 120cd/m2

  ICC - version 2 (a MUST to validate it with 3rd party applications), Bradford or CIECAT02 chromatic adaptation, table function, 400 patches, "calibration 1" profile = CAL1 slot

  Once completed, it will ask for a file name, for example, you choose "U2713H_CAL1.icm" and click OK. The profile will be created and set as the default profile for the screen of your operating system Wndows.

  Lunge CAL1 has been stored in a LUT3D of calibration of the "sRGB" @ 120cd/m2. In "U2713_CAL1.icm", it is stored:

  -a linear LUT (output = input), clealing all calibration in GPU

  -actual behavior of range and gamma of OSD CAL1 predefined after calibration.

  It goes the same for CAL2.

  Don't forget that most applications like Photoshop need color management real mode the monitor OSD to have their good active ICM as a 'default' before opening this color managed application.
  For example, if you calibrated CAL2 = AdobeRGB and have a U2713_CAL2.icm, and you want use CAL2 in Photoshop, this profile must be defined as a default value in the OS color management prior to Photoshop.

• U3014 + PS3. Problem with the display resolution?

  Hello!

  PS3 cannot expose to a resolution of the screen for Dell U3014. I use the HDMI-HDMI cable. In the attempt of a choice display resolution in the settings of the PS3 when it test the monitor may not issue image. This means that an installer of the screen may not be complete. Now the installation of the screen program gives 576 p. As you understand, it is impossible to play on it. Please help with a problem.

  Thank you.

  Niko7,

  The U3014 HDMI port can do 1920 x 1080 (1080 p).
  * With the monitor and the PS3 on and using a HDMI to HDMI (not a DVI to HDMI) cable right, turn off the PS3 via the power switch on the back and then turn back with this same switch
  * Press and hold the power button on the front of the PS3 until you hear 2 beeps. Once it turns on, the screen should display a message something like: "an HDMI cable has been detected, you want to set up?
  * Then go here to set the video output to your TV/monitor
  http://manuals.PlayStation.NET/document/en/PS3/current/settings/videooutput.html
  * When you go through Setup for HDMI setting, you will need to check what your monitor video output modes supported (480i/480 p/576i/576 p/720 p/1080i/1080 p)
  * After you go through the intial setting HDMI menu and displays your PS3 via HDMI cable, on the main menu of the PS3, go to settings and then scroll the display settings. In display settings, put the full range RGB (HDMI) to full and put Y Pb/Cb Pr/Cr super-white (HDMI) on we

• Selection of scene and the PS3 with XBR65X900A

  Just upgraded my PS3 firmware and now when I select using my TV remote and sync Bravo it controls sensors to 'Photo select scene' and I hear no image, just my PS3. When I go to contol - Options - select scene TV, the only option I have is the picture. All other selections are grayed out. My PS4 works correctly, as does my FMP - X 1 and DirectTV Saturday.

  PS3 using HDMI 3 input

  PS4 using input HDMI 3

  DirectTv via HDMI 1 input

  FPM using input 4 HDMI

  PS3 and PS4 HDMI signal transmitted through Sony receiver.

  Any ideas?

  Thank you

  Bob

  Update:

  Not swapped the rec HDMI cable Sam passes to 1 HDMI XBR still no picture and the stage select switches to Photo, all others grayed. Different cable entry not using different HDMI does not Barvo Sync. Result I can't get no picture from my PS3 to my XBR65X900A. Worked before the upgrade of the PS3 this morning...

  OK, I found the solution... Press and hold the power button on PS3 for about 10 seconds. You will hear a beep and a Setup program appears to set up the HDMI cable. Instuctions to follow and which will give you the video output to your HDMI cable.

  Sorry for the confusion but, I thought that it was a function of the XBR65X900 while I posted here. Maybe this will help someone else.

  Bob

• W2207h and stakes of the PS3

  Hey all,.

  I had a w2207 yesterday. It is a large screen, but he made some things funny with my ps3.

  When I got it, it was fine. I loaded a game, made a few updates, not a big deal.

  As soon as I tried to play "warhawk", the screen went on the fritz and turn itself off.

  Then, I turned on my PS3 and reset the resolution settings. It automatically back to 1080 p. Looked nice.

  I tried to load it again, and the screen immediately went black. I tried to reset the settings display and the PS3 again.
  This time, when I chose the automatic settings, the screen went black again. I couldn't get any resolution higher than 480 p without the screen goes black.

  How can I get my HD PS3 look back?

  -Edit-

  I played warhawk on 480 p and it is fine. Is not too evil eye, but I could still use the hi-def I had.

  I tested 720 p and 1080 p, and now is doing the static thing. I took a picture of the 'static ':

  PS3 w / W2207h on 1080 p

  Unplug the monitor and hold button power for 30 to 60 seconds.  Plug the monitor back in and give it a go.  The monitor works with a PC?

  Your TV is probably back the set video scale better than the monitor.

• Satellite P200 - problem with the use of disk HARD original as external drive

  I've been pulling on my hair for a month now and could do with help

  I have a Satellite P200 series PC laptop and have recently updated from the 200 GB for a pair or 320 GB HARD drive. No problem

  The question I have is that the old drive of 200 GB system I am unable to use it in any other machine or according to and external storage device.
  The original secondary disc works fine few matter where I use it... (In my PS3 at the moment)

  When I install the orgional system drive in my laptop and rebuild windows it it still works 100%.
  Hance a good work of 200 GB of HARD drive.
  Take it out and serve in another machine of storage that it won't - boot all I get is cyclic redundancy errors

  I formatted, low level run endless disk tools
  WD test came back with diagnostics Test::Read 11 - cable sector error!

  Even as a drive on the original laptop is the same

  All ideas taken with gratitude that I don't want to lose a good 200 GB HARD drive

  Thank you very much
  Roger

  Hello!

  The external box is maybe defective, because you said that the HARD drive works in your laptop and the PS3 without problem.
  You can test the HARD drive in another external case?

  WD test unknown to me but I always use the Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  With the Drive Fitness Test, you can test your HARD drive. Download the CD image, burn it to a CD and boot from it. You can then the HARD drive.
  On the same site is a user's guide if you want to know more.

  Good bye

• y at - it a program or an emulator that will allow me to read my hdd in the ps3 while it is installed internally in my pc

  my ps3 is dead and I have the hard drive installed internally in my pc. It has been recognized but not appear in my computer there is no way to access it. I don't have the stuff to make an external hard drive. There must be a way to read it so that I can recover about 100 GB of video I have on this subject. I don't care save games, only in the media.

  my ps3 is dead and I have the hard drive installed internally in my pc. It has been recognized but not appear in my computer there is no way to access it. I don't have the stuff to make an external hard drive. There must be a way to read it so that I can recover about 100 GB of video I have on this subject. I don't care save games, only in the media.

  Hello

  I'm not aware of the capacities that the PS3 hard drive would have?

  I would recommend that discuss you with other PS3 owners who may have already made a similar recovery.

  Here are a few links for your convenience.

  Forums-PlayStation 3:

  http://www.ps3chat.com/forumindex.php

  PS3 Discussion of-Forum Playstation 3:

  http://www.ps3chat.com/PS3-discussion/

  PlayStation 3 hardware - Playstation 3 Forums:

  http://www.ps3chat.com/PlayStation-3-hardware/

  Concerning

• The PS3 OS

  Someone has installed xp, vista or any OS for PS3 here?  I will try to find which one is the best.  Please let me know.

  Hello crazywife,

  Thank you for using the Microsoft answers Forum

  If you go on the ps3 forums they will tell you that the ps3 system is not designed for any other OS with the exception of the game platform and the Linux operating system. The material, to my knowledge, is not able to run all the Windows OS on this game system. You will need to do a search with your favorite search engine for other operating systems of Linux on the PS3 and you should have a lot of results to look through.

  Let us know if this helps answer your question.

  Judd
  Engineer Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Windows XP don't talk to the PS3

  I have windows XP and trying to get the computer talk to him about the PS3 for media sharing. The last few days while pretending to have all the boxes are checked on the computer and with WMP11 and all the setting supposed to be correct in the PS3 can't do.

  The two are related to the network through wireless router and both connect to the internet.

  While fiddling I chose a setting of BD in the PS3 (which I'm sure that has nothing to do with it), however the PC and laptop happened to appear on and everything was fine, well for an hour, because then a conflict of IP configuration occurred between PC and laptop and everything was lost. I have released and renewed the IPCONFIG and the net has been upward and now neither can see the PS3 and vice versa... Essentially, it works, but the IP address conflict he hit off... someone at - it ideas...

  Hello

  Disable the security software on the computer and check.

  Important: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  See also: http://windows.microsoft.com/en-US/windows-xp/help/windows-media-player/11/share-media

• Why some devices (like the PS3) connects through the 5 Ghz band? (EA3500)

  Just installed a Linksys N750 (EA3500) router (WAN - LAN Configuration).

  I have set the two broadband networks: 2.4 Ghz and 5 GHz with different SSID and different WAP/WAP2 staff mixt.

  While some devices display correctly the two networks, I am facing problems with the 5 GHz band and wonder if it's the breath of some sort of failure:

  -My iPad offered the two signals and allow me to define the 5 Ghz band, but it is showing the weak signals and stall when loading Web pages; as soon as I put it instead on the 2.4 Ghz band, (standing at the same place, of course), what's up, excellent signal.

  -J' have a Mac Mini and the location of the PS3 side by side.  The Mac Mini seems to work perfectly in both bands, 2.4 or 5 - excellent signal. However, the PS3 has failed his test of connection and indicates that the signal is not noticeable on the 5 GHz. But connect as a wink on the 2.4 Ghz band.

  -Got on and off voltage signal of 5 GHz on a laptop; connected to 2.4 Ghz, everything works perfectly.

  -iPhone 4s: I can't even see the SSID of 5 GHz, but I get the 2.4 so Guess account...

  So I'm tempted to conclude that some devices can not just keep up (?) to connect on 5 GHz...  But... a PS3? ... Huumm... (but true: PS3 came out in 2006...)

  No logic to this?

  Thank you

  Rob

  There are devices just wireless which are not turned on or is not compatible to work with a network of Ghz band. The WiFi feature may not be up-to-date or limited to only work with a network of 2.4 Ghz. In your case, you might want to check with Sony so PS3 can be updated to work with a network of 5 GHz.

• Problems to connect to the ps3

  Hello

  I bought the router e3200 around a month ago and everything worked well until about two weeks ago. Now, when I go on my ps3 I get internet connection and always bad cant hardly play games online more with all the GALs. IM assuming that it is the router because the internet connection is fine when I connect the PS3 directly to the modem. But the internet on my pc seems to work fine with the router, so I'm not quite sure. I tried to connect the ps3 wired / wireless, done all kinds of port forwarding but I'm still not getting the strong connection that I use to have. At first, I just wired my ps3 directly connected to the router with its default value and out of nowhere just got a low internet connection suddenly so I don't know what went wrong. If someone could give me a kind of Council, would be much appreciated.

  Thank you

  If your PC is running well behind the router without delay, it probably isn't the router causing lag.

  If you connect the ps3 with a cable he blames a delay to tell you, but if you are late in the course of the game only I wonder if you have other things running on your PC that can cause lag (downloads, torrents)

  Sometimes it also depends on what game you play online. Some games requires you to connect to one of the other players that have a connection lag.

  Also if you go to the network settings on your PS3 what type of NAT gives you in the view of the State?

  If this is the type of NAT 3, you will have a chance on connection problems while trying to play a game online.

  If it's NAT type 2, it should be good.

  Hope this helps you solve the problem