Ubuntu 8.10 on the NB100!

Similar Questions

• Is there anywhere a technical manual for the NB100?

  Is there anywhere a technical manual for the NB100?

  I want to replace my internal hard drive with a bigger and Dona´t want to destroy anything, so a manual for how best to open the NB100 would be good :-)

  Cola

  Hello

  The operating manual only provides an instruction how to upgrade the RAM module in the NB100 model and there is nothing about the HARD drive upgrade.
  This means that the HARD drive is NOT extensible user and therefore you will lose warranty if you would remove this notebook in order to install a larger HARD drive.

  You want to lose the warranty?
  I don t think so

  The HARD drive is hidden is the laptop I know the whole notebook must be disassembled to gain access to the HARD drive. All covers, internal display, keyboard, etc. must be removed in the first place.

  As I said this would void the warranty, and secondly, this procedure is really complicated!

  I think and I recommend you to contact the technician authorized for these updates!

  Good bye

• Reset the NB100-11J - how does it work?

  I want to sell my Netbook NB100-11J but I want to rest the device. There is a restore CD, but there is no optical device so that I can do this. And now? I have spend any other optical device for this CD.

  Can someone help me?

  Hello!

  As far as I know Windows XP was preinstalled on your laptop.

  There is only one way to reinstall the laptop: you need an external CD/DVD drive. It's the own possibility.

  Good bye

• Satellite L750 - package Ubuntu 11.04 for the helmet?

  Hello

  I have Satellite L750 and that you have installed ubuntu 11.04 but headphone port does not work. Speaker seems works very well.

  Is there any package that I can install to get it working?

  Hi puyo78,

  Toshiba doesn't support all versions of Linux, and only the version preinstalled Windows is supported. Drivers are only available for Microsoft Windows.

  You need help from some Linux guy. You can find them in various Linux forums and they can give you an appropriate response.
  Last but not least check this article:
  [You know a useful site for Linux on PC support? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=14]

• The NB100 - error message - on «WWAN» software activation

  I am using the mobile broadband 3 & receive the following message if poster every time I try to connect: -.
  "Activation of the software has made '228' unsuccessful attempts to the type of carrier"WWAN". The software will be blocked for "WWAN" connections after that '772' more futile attempts. For more information, contact your system administrator'

  I can then open a session, but of course 1000 attempts I got fades quickly.

  I was told by 3 is not a problem with their s/w or h/w?

  I'm on a Toshiba NB100 & am running Windows XP. I suspect that there is a software conflict or that I made a mistake in XP "network connections and the Internet?

  The modem works without problem on my Toshiba Satellite 3000 - X 11 laptop.

  Thank you

  Hello

  You use the 3rd party modem.
  Have you checked the modem manufacturer page if such error is already known for guys?

  To be honest I have no idea what could cause this error, but it looks like that activation of the software has failed and you need to contact the manufacturer of the software for more details.

• HP Envy 15-w002nx 360 X: how to remove GRUB or Ubuntu entry UEFI in the boot order

  Hello

  I tried Ubuntu in my HP Envy X 360 15 - w002nx laptop.  After you uninstall using uninstaller os, single operating system Ubuntu is deleted but not the GRUB. It always shows in the UEFI boot order. How to remove Ubuntu boot order entry? I tried EasyUEFI and also bcedit.exe command. It removes the entry, but after restart iis to come again. How to get rid of this problem?

  I appriciate your help.

  Hello

  Thanks for posting in the HP Support forum.

  In order to achieve that you need, please read these articles and follow the steps.

  You must first remove the EFI partition Ubuntu (actually, I think ths is what you see)

  After that, you can remove the HDD MBR GRUB using bootrec.exe /fixmbr and /FixBoot Bootrec.exe (this is done using CD/DVD recovery Windows or with Windows 10 - >ISO)

  > http://askubuntu.com/questions/63610/how-do-i-remove-ubuntu-in-the-bios-boot-menu-uefi

  > http://askubuntu.com/questions/553003/step-by-step-instructions-on-how-to-remove-grub2-or-mount-the-efi-partition-and

  > http://ubuntuforums.org/showthread.php?t=2253087

  These operations are a little risky and if done incorrectly can make your PC unbootable. Please, back up your most important data before taking any action.

• Ubuntu erased OS and the system recovery Partition drive

  I wanted to test Ubuntu and install it with my Windows Vista. However, the Ubuntu installation failed and somehow corrupted and cannot continue with the installation. So just right now, I'm still in mode "test drive" in Ubuntu that runs on a CD player.

  Apparently he erased my drive hard because I can't start Windows (does nothing) and the F11 recovery partition would not be.
  This computer did not come with a recovery disk (I have the HP-m8000n) and it is refurbished.

  I just realized that these computers have these stickers that contain the product key. Could I possibly use this key again? If so, how can I install Windows Vista software? I don't have a record of it at all :(

  Please and thank you! I appreciate any response!

  In addition to Richard's response.

  Your key is for the specific version of preinstalled victory, a generic installation of OEM win "might" work with your key. You can, but try (with your key)

• UNINSTALLING UBUNTU FAILS TO RESTORE THE DISK SPACE

  Hello, I installed Ubuntu on a section of 30 GB of the drive 'C '. After you have uninstalled Ubuntu the 30Gbs have not been restored to the player leaving me 30Gbs short and I can't find a way to get back them. I assumed that space would be, should be automatically reinstated on the uninstallation of Ubuntu, but they were not. A clean install of windows and restoring the factory settings also failed (I use Acer recovery). Any assistance or solutions to restore the Gbs missing would be appreciated.
  Thank you

  Use it to view and then delete the Linux partition. You can then merge the partition in C using the same utility...

  EASEUS...

  http://www.partition-tool.com/download.htm

• Get the error "Windows cannot be installed to this disk" when you try to install Windows 7 after Ubuntu was installed on the desktop computer

  So I installed Ubuntu 12.04 on my newly built office. I didn't like, so I had windows 7. I started Windows, and choose to perform a custom, Setup since I did not have before windows. Now, here's the problem, is not letting me install on my drive. I get the message: Windows cannot be installed to this disk. the selected disk is a MBR partition table. on EFI systems, Windoos cannot be installed on GPT disks.    Is my previous installation of Ubuntu, the cause of this? How can I resolve this problem and install windows7?

  GParted allows to format the disk, and then try the installation again.

  Operating instructions GParted: 9 steps - wikiHow

  http://gparted.sourceforge.NET/LiveCD.php

• Add Ubuntu 13.04 in the Windows store

  == deleted ==

  If your laptop is limited to Windows 8, it is. However, it would not damage the tent to install Ubuntu.

  Download Ubuntu on the Windows store needs to be done by the Ubuntu team themselves because they are the owners of this one thing, I want to tell you.

  Ashwin

• VMWare Tools fails in Ubuntu guest OS for the invalid kernel headers

  Installation and configuration of VMWare Tools fails in my Ubuntu OS prompt, because it cannot find a valid kernel header place, seems...

  I have build and headers packages installed:

  $ sudo apt - get install linux-headers-$(uname-r)

  Reading package lists... Fact

  Building dependency tree

  Reading state information... Fact

  Linux-headers - 3.16.0 - 60-generic is already the latest version.

  0 updated, 0 newly installed, 0 to remove and 3 not upgraded.

  $ uname-a

  Linux ubuntu 3.16.0 - 60-generic #80 ~ 14.04.1 - Ubuntu SMP Wed Jan 20 13:37:48 UTC 2016 x86_64 x86_64 x86_64 GNU/Linux

  $ ls-l/usr/src

  Total 32

  drwxr-xr-x 24 root root 4096 24 feb 10:20 linux-headers - 3.13.0 - 79

  drwxr-xr-x 7 root root 4096 24 feb 10:20 linux-headers - 3.13.0 - 79-generic

  drwxr-xr-x 24 root root 4096 mar 17 2015 linux-headers - 3.16.0 - 30

  drwxr-xr-x 7 root root 4096 mar 17 2015 linux-headers - 3.16.0 - 30-generic

  24 drwxr-xr-x root root 4096 28 gen 18:59 linux-headers - 3.16.0 - 57

  drwxr-xr-x 7 root root 4096 28 gen 18:59 linux-headers - 3.16.0 - 57-generic

  drwxr-xr-x 24 root root 4096 Feb 8 18:10 linux-headers - 3.16.0 - 60

  drwxr-xr-x 7 root root 4096 February 24 10:27 linux-headers - 3.16.0 - 60-generic

  Debugging a bit vmware-config - tools.pl, I managed to limit the matter until this fault of command:

  $ sudo/usr/lib/vmware-tools/sbin64/vmware-modconfig-console - vmxnet 3.16.0 - 60-generic build-mod - k ' / usr/bin/gcc ' ' / usr/src/linux-headers-3.16.0-60-generic/include' misc vmxnet - l ' / usr/lib/vmware-tools ".

  
  As much information from the kernel will not work with the running kernel.

  Anyone with a clue of this error?

  Thank you!

  I downloaded and installed the VMWare Tools 10.0.0 and installed - I have no problem now, and I can see the shared folder correctly under the/mnt/hgfs, as expected...

  Thank you all!

• Ubuntu: can't update the repository of vmware-tools more

  After the sequence of my sources.list no longer works:

       deb http://packages.VMware.com/tools/ESX/5.1latest/Ubuntu specific principal

  apt - get update occurred after the error output:

  100% [Warten auf Kopfzeilen]

       Ign http://packages.VMware.com specific Release.gpg

       Ign http://packages.VMware.com release says

  Hello

  works again.

  Need to change the url string in the source for «deb https://packages.vmware.com/tools/esx/5.0latest/ubuntu precise hand» list

  Thx for the help.

• Comments (Ubuntu) can not access the internet through host (XP)

  I used Google to find a solution as to why guest (Ubuntu) cannot access the internet. Host system is Windows XP. None of the solution has not worked for me. Solutions that worked for others: 1 activation NAT 2. Allowing the shared internet connection

  I think the problem is that my host and guest use different subnet masks default (respectively 255.255.0.0 255.255.255.0 vs) assigned by DHCP. The host's configuration manually to use the same subnet mask doesn't help either. I guess that I have it configured incorrectly.

  Welcome to the community,

  I think the problem is that my host and guest use different subnet masks default...

  Your configuration looks like, it has been changed manually! Default vmnet8 (NAT) on the host computer has an IP address like 192.168.x.1/24, comparable to vmnet1 (Host-Only). I suggest that restore you the configuration to its default settings that should work as expected.

  André

• Ubuntu problem and get the ip address of it.

  Hello!

  I just have a problem that you see on the image, the server is started and it does not meet the internet or local network. and I do not see a window of the application 'samp3svr '...

  I am new to Ubuntu and hope someone wants to help me.

  Thank you!

  BTW, the internet connection on the Ubuntu VM works.

  I use Fritz WLAN! Box and helped host exposed to my pc

  screen:

  http://img35.imageshack.us/img35/1279/problemslc.PNG

  Hello.

  Are you just trying to find the IP address of the virtual machine Ubuntu?  If so, use the command:

  ifconfig eth0

  Good luck!

• Why of opaque boxes appear in place of the entered text (Firefox ver. 34/Ubuntu 12.04) in the browser window?

  There was a similar question posted earlier, but this isn't exactly the same thing. When all 'text' has been reached and appears in the URL address box - it is characterized by rectangular, green, black, or gray boxes (instead of letters, numbers, etc.). I can always navigate normally using the browser window, the text always appears in this format "hidden". In safe mode does not change the appearance. I updated the software, Firefox, using Linux (Terminal).
  This problem is specific to Firefox only... no other browsers show this way.
  It has been a consideration for a while, now. In fact, I got to use another browser, although I have Firefox in favour (including Linux) and wish to use it.
  Thank you.

  Sorry to hear that you have been waiting so long! Could you check this thread started by another user of Linux and see if workaround it helps you on your system:

  How can I stop firefox ffrom blocking URLS

  (Workaround was to switch the preference gfx.xrender.enabled to false).