Unable to access QLogic Fibre Channel HBA

Similar Questions

• Driver of HP StorageWorks 82Q PCI-e Fibre Channel HBA

  I'm looking for the latest driver supported for these cards. U1 ESXi 4.1 (Build 433742)

  HP StorageWorks 81Q PCI-e Fibre Channel Host Bus adapt Dual Port.

  HP StorageWorks 82Q PCI-e Fibre Channel Host Bus adapt Dual Port.

  I have a hard time connecting the part name with suitable library of VMware driver CD.

  After a quick glance to the HCL, it seems that a driver is already "inbox." However, there is another who is mentioned http://downloads.vmware.com/d/details/dt_esxi4x_qlogic_841k12311/dHdlYnR3QHdiZHRAQA==

  André

• Fibre Channel vs. Fibre Channel over Ethernet

  Hello everyone,

  Have questions about storage of this connection technology:

  1. what kind of cards are required for the FC and FCoE?

  2. do I need these adapters on both sides, server, and storage?

  3. what switches and cables are required for the FC and FCoE?

  Thnx in advance

  Yerkoff

  Yerkoff wrote:

  1. what kind of cards are required for the FC and FCoE?

  FC = Fibre Channel HBA Qlogic QLE2462 or OEM of Emulex.

  FCoE = cards of convergent network (http://en.wikipedia.org/wiki/Fibre_Channel_over_Ethernet)

  2. do I need these adapters on both sides, server, and storage?

  HBA is required on the server. They connect to FC switches. The switches connected to the SAN, who also has the appropriate maps build-in.

  3. what switches and cables are required for the FC and FCoE?

  FC switches

  Cables could be Multimode, multimode or copper.

  AWo

  \[:o]===\[o:]

  = You want to have this ad as a ringtone on your mobile phone? =

  = Send 'Assignment' to 911 for only $999999,99! =

• Can I disable the B200 blade Fibre Channel vHBA

  Hello

  I'm setting up my service to my B200 blades profiles and I was wondering if there was a way to disable the Fibre Channel HBA. I will not use CF as all my iSCSI storage.

  Thank you

  LTA

  When you create a service profile, you are asked if you want the storage (= CF) or not; you say no!

  If you missed this step and you have created vhba, just remove them later.

  It is not possible to disable vhna.

• 4.1 and vCenter ESX only allows to use 1 Fibre Channel LUNS

  Hello

  I have 8 blades ESX 4.1 (build 348481) in a Cisco UCS 5108 chassis. Each blade has 2 x HBAs available. I also have a fiber channel storage array that is configured to provide 2 1.8 to LUN (for now and in the future).

  When I go in vCenter and select one of the ESX servers under "Configuration"-> "Storage adapters"-> "Rescan all...» "each server detects the table (and several paths towards it) but only shows a single available LUNS (LUN 0) when 2 LUNS should be available (LUNS 0 and 1 logical unit number). See the image below.

  

  Now, the thing that confuses me is that when I get on the command-line of the ESX via SSH server and run "esxcfg-mpath - b", I see a list of all the paths including the paths to the LUNS 0 and 1 logical unit number (see output below). Any ideas on why ESX and vCenter authorizes me to LUN 1?

  esxcfg-mpath - b:

  NAA.600508e0000000001e10a036bc3f5601: FREE Serial Attached SCSI Disk (naa.600508e0000000001e10a036bc3f5601)
  vmhba0:C1:t0:l0 LUN:0 Status: active sas adapter: 5c84c75ed0910000 target: 1563fbc36a0101e

  MPX.vmhba32:C0:t0:l0: Local USB CD-ROM (mpx.vmhba32:C0:T0:L0)
  vmhba32:C0:t0:l0 LUN:0 Status: Active Local HBA vmhba32 channel target 0 0

  EUI.706f636c6162766f: disc SCST_FIO Fibre Channel (eui.706f636c6162766f)
  vmhba2:C0:T1:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f2 WWPN: 21:00:00:24: ff: 32:10:f2
  vmhba2:C0:T1:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f2 WWPN: 21:00:00:24: ff: 32:10:f2
  vmhba1:C0:t0:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c2 WWPN: 21:00:00:24: ff: 32:45:c2
  vmhba1:C0:t0:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c2 WWPN: 21:00:00:24: ff: 32:45:c2
  vmhba1:C0:T1:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c3 WWPN: 21:00:00:24: ff: 32:45:c3
  vmhba1:C0:T1:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00: target: WWNN: 20:00:00:24: ff: 32:45:c3 WWPN: 21:00:00:24: ff: 32:45:c3
  vmhba2:C0:t0:L1 LUN:1 status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f3 WWPN: 21:00:00:24: ff: 32:10:f3
  vmhba2:C0:t0:l0 LUN:0 Status: active CF adapter: WWNN: 20:00:00:25:b5:00:00:ae WWPN: 20:00:00:25:b5:00:00:1e target: WWNN: 20:00:00:24: ff: 32:10:f3 WWPN: 21:00:00:24: ff: 32:10:f3

  MPX.vmhba32:C0:t0:L1: USB Direct-access locally (mpx.vmhba32:C0:T0:L1)
  vmhba32:C0:t0:L1 LUN:1 status: Active Local HBA vmhba32 channel target 0 0

  MPX.vmhba32:C0:t0:L2: USB Direct-access locally (mpx.vmhba32:C0:T0:L2)
  vmhba32:C0:t0:L2 LUN:2 status: Active Local HBA vmhba32 channel target 0 0

  Its because the table shows two LUNS have the same value of ID of Page 83, ESX both think you have 2 paths to the same LUN.  Paths multiple ESX driver uses the value of the ID of Page 83 to determine if 2 LUNS are the same device.

  It was a problem with that code, that it resembles yours-based Solaris beginning according to the tables and other tables that used code based on Solaris pre-COMSTAR, as well as tables that use SCWIST.

  There is really nothing you can do about it, because it is a bug in the software of the array (it shouldn't be exporting 2 LUNS different with the same ID value of Page 83 - it is a violation of the standard).

• Two R810s, each with two 8Gb Fiber Channel HBA + MD3620F + MD1220

  Hi people.

  I am planning an installation on this end, and I'm tender hand in the hope that the community can help me carry this all together.

  To explain, I have two servers Dell PowerEdge R810, each with two 8 GB HBA Fibre Channel adapters.

  I also have a Bay SAN of Dell PowerVault MD3620F 8 Gbps, with two controllers.

  I also have a Dell PowerVault MD1220 DAS SAS Expander Bay.

  I think to connects both R810 servers directly to the MD3620F, in order to consume all ports of four CF on the MD3620F. That is, one in each controller, from two HBAs in each server. (I can do this, or do I need a Fibre Channel switch? The MD3620F has 4 available ports, 2 per controller, so it would seem to be a natural configuration for only these two servers)

  Then, I will link the MD1220 to the MD3620F, so that its readers are also accessible through the two R810s on the link of Fiber Channel 8 Gbps. (what is the process to connect a MD1220 to a MD3620F?)

  Thoughts, tips, suggestions?

  Thank you

  -Wentil

  Hello Wentil,

  Here is a link to our deployment guide. FTP://FTP.Dell.com/manuals/common/PowerVault-md3600f_Deployment%20Guide_en-us.PDF . in the deployment guide, we show how you can do an install direct attach & network attached using a fiber switch.

  Please let us know if you have any other questions.

• Fibre Channel card configuration on the host esx 5.1

  Hi all,

  I have three 5.1 esxi hosts.  I have new port 2 8G Fibre Channel cards installed in each and pass the cable FC since the card port goes to the fiber.

  It's my first time in collaboration with CF cards VMware hosts, what else should I do for these cards to be active or updated network in?  A good explanation, Docs and or video would be extremely welcomed.

  Just ask EMC technology to make the zoning on the SAN switch and the LUN masking and card introduced volumes to your hosts on the side storage... after the volumes, simply go to your ESXi, rescan your HBA and create data warehouses.

• 10GB Ethernet - Fibre Channel

  Most of my clients can hold 10 000 to 15 000 ther budget for:

  Storage

  Infustructure network

  HBAs for ESXi host

  Are there tool or a way to find solutions for businesses who want to enter the field with Essentials more, but because of the e/s, we need more storage gigabit NIC.

  Is the next logical leap of 1 gigabit 10Gbe? Or is it Fiber Channel?

  Hey...

  "fibre channel" is essentially a storage architecture...

  You are considering fiber ethernet by opposition to the copper perhaps?... 1000BASE-SX or LX for example...

  That there is no increase in bandwidth over copper gigabit... It is used to connect longer distances, copper CAN... or connect two buildings where a connection copper between two buildings with two blocks of independent electricity is against the regulations (it is the case in the United Kingdom),

  The next viable step upwards of copper gigabit "done, team/shared resources" several gigabit copper... or 10GBE which maybe more fiber or copper.

  We use dual 10GBE fiber in our ESX host and our Center database to the production and satellite floor data centers.

  Hope that helps... after if is not the info you wanted... :-)

• Unable to access e-mail. Password does not. Cannot receive e-mail to resett

  Request password reset. Said that they sent me an email. Unable to access email - this is the problem! What now?

  You confirm the password to webmail providers page by logging in with the user name and password. If they work then you have the correct credentials. When you do that, you need to get a list of the parameters of the server of your provider and check what you have in Thunderbird.
  You can post the Thunderbird troubleshooting info here and let someone to look at the settings you have now. They can spot a problem.
  You know that you are using the right username and password first.

• Unable to access several sites and install apps in the appstore. A possible malware issue. What should I do?

  Hey guys,.

  I am using a 8 GB Mac Mini with an i5 processor clocked at 2.6 GHz Mac OSX Yosemite 10.10.5 (14F27).

  I don't have problems with this until I visited a torrent site (I hate invited but unfortunately I did this time). Since that unfortunate activity, I get mackeeper pop ups and my search engines by default on all my browsers like Safari, Firefox and chrome automatically replaced by trovi. I can't access to 90% of websites like YouTube except facebook, twitter, Netflix, gmail, google, yahoo and other email clients. I get a "cannot connect" on firefox and messages error 'Safari cannot connect to the server. I checked with the ISP settings and proxy but no problem there as my other devices such as the ipad and the iphone apple work fine on the same wifi network. I erased all the extensions, cookies and cache but without success.

  I am also unable to access the app store to install applications. I wanted to make its own memory and a removal of the malware, but couldn't that since the appstore could not contact the server.

  I mainly use this machine for audio production and browsing through Logic Pro X.

  What is a malware problem? If so, how to fight that? Should I format my HD and upgrade to El Capitan? Who will solve the problem?

  Kindly help.

  See you soon,.

  AR

  Try this first: https://www.malwarebytes.com/antimalware/mac/

  And if it does not help: http://etrecheck.com

• Connection timed out on the Web site. Tried to delete the cache/cookies. No proxy. Internet Explorer. Unable to access. Help, please. Site Web works.

  I get Connection Timed Out on these Web sites: energy-medicine - software.com and energy - medicine.info. I tried to clear cookies and cache. I put no Proxy. I tried Internet Explorer and are still unable to access. I restarted my computer. I know that this site is active, because I contacted the webmaster and he says that it is active to an end. What else can I do to access this site? Thank you!

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

• After a few minutes of use, Firefox becomes suddenly unable to access most of the sites.

  Firefox running on the latest version of Fedora, after a few minutes of use, Firefox becomes unable to access many Web sites. It seems to be limited to the Web sites I visit frequently, but it is difficult to say. It affects all sites, however. It also affects the same sites every time. Restart the browser fixes it, and that it will often resolve itself given sufficient time, also.

  I tried to clear my history and cookies, reset the browser and navigation without any active modules, but nothing seems to have an effect.

  Try disabling IPv6.

  • http://KB.mozillazine.org/Error_loading_websites#IPv6

  Check also for other issues.

  You can try to reset (power off / on) of the router.

• Problem with XServe and XServe RAID via Fibre Channel

  Hello everyone,

  I have a problem with my blended Xserve RAID.

  I see in RAID-Admin and configure it successfully (via Ethernet). Connect with our Xserve via Fibre Channel, but the XServe and XServe RAID do not detect each other.

  The fiber on the Xserve channel LEDs are white on the Xserve RAID completely off and permanent.

  RAID-Admin status of Fibre Channel: 'No connection (1 table)' with a red square.

  If I try to open the utility of fiber channel I get the message: "card Fibre Channel is not found." Utility disk OS X can't, too.

  I changed the card connector cable, and made several reboots. But each time the same thing: they do not detect each other.

  Xserve (2009):

  -2.26 GHz Quad-Core Intel Xeon 5500

  -Map of Apple dual-channel 4 Gb Fibre Channel (LSI7204EP)

  XServe RAID:

  -RAID 5 in an array (only on the left with 5 x 500 GB)

  -1.5.1 Firmware

  -Cable Apple 4 Gb SFP - SFP

  Thanks for your help and sorry for my bad English!

  Hi Mpm-Mainz,

  Check if you have enabled LUN masking. To be able to see, you will need to download raid admin 1.5 not the 1.5.1

  Xserve RAID Admin Tools 1.5

  Have you also tried to use the other controller? Even if there is no disc in there, then it should appear in the preferences of fiber card system.

  Thank you
  Owen

• Firefox is unable to access the internet

  Hello

  Firefox is unable to access the Internet. Internet in the phone works, because all applications in my phone are able to access the Internet. I tried to access several different web pages. Their work. The screen is all black, no error messages appear. The strange thing is that Firefox Sync seems to be able to connect to the server, and I can download plugins.

  Best regards
  Joel Hedestig

  You can try using the beta version of firefox mobile?

  https://play.Google.com/store/apps/details?ID=org.Mozilla.firefox_beta

• I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix the problem

  I'm unable to access Apple Store after the iSO download 9.3.1 on iPhone 4S. How can I fix this problem?

  What happens when you try to access the Apple Store app?