Unable to boot to the desktop does not work auto repair

I recently updated my windows 7 to windows 8 and now the PC is stuck in a loop of auto repair of windows 8. The PC does not the same page and there is no way to start the PC in safe mode (as you can when you get a virus). The repair just doesn't work.

I have read various other forums (and it seems that this is a common fault) and I tried all the things suggested on the command screen but none of them work.
Anyone know how I can fix this without losing my personal data - I have over 10,000 photos on the PC and do not want to lose any of them. So I really don't want to uninstall it and wipe the data.
Help, please!
Thank you

Andrew B. salvation,

Thanks for the reply with more information.

We have of Windows 8 installation media or create an installation media.

Once you have the disc, follow the steps above and try to rebuild the configuration Data (BCD) start.

Note: If the computer is newly purchased, it would be preferable to contact the computer manufacturer to address this problem. (If during the warranty period).

Here are some measures that could help solve this problem.

I suggest you to rebuild the BCD (Boot Configuration data) fromcommand line and check if that helps.

1. Insert the installation of Windows 8 media and start the computer using the disc.

Note: You will need to consult the computer manual on how to set the CD/DVD drive as the first boot device in the BIOS.

2. Once you start using the installation disk of Windows, on the installation of Windows 8 window, click on repair your computer.

3. click on Troubleshooting and Advanced options. Select command prompt. Enter the following commands to four in the command prompt.

Bootrec /fixmbr
Bootrec /fixboot
Bootrec /scanos
Bootrec /rebuildbcd

Once the order is complete, restart the computer.

Hope this information helps.

Tags: Windows

Similar Questions

  • Shortcut icons on the desktop does not open.

    Shortcut icons on the desktop does not open unless I select a program in the "Open with" menu that appears whenever I click on a shortcut. This has only started recently. Previously I would click and icon would go directly to the Web site without asking how I want to open it. What is the cause?

    Hello

    · What is the number and the model of the computer?

    · Do you remember all the recent changes on the computer before the show?

    · What is the service pack installed?

    1. you can follow the steps in the link below and check if this can help: cannot open files with extensions such as.exe, .com, and.lnk on a Windows XP computer: http://support.microsoft.com/kb/923077

    2. online virus scanner and check if any malware or virus detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

    NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  • using firefox 24, yahoo toolbar disappears and the keyboard does not work on some websites

    We have installed firefox 24, yahoo toolbar sometimes disappears. On some web site when trying to enter a password, the keyboard does not work until you double click of the mouse on the registration form. This on two different systems of windows 7. Each thin seemed to work fine before the update prior to the installation of 24.

    Hello

    Try Firefox Safe mode to see if the problem goes away. Safe mode is a troubleshooting mode, which disables most of the modules.

    (If you use it, switch to the default theme).

    • Under Windows, you can open Firefox 4.0 + in Safe Mode holding the key SHIFT key when you open the desktop Firefox or shortcut in the start menu.
    • On Mac, you can open Firefox 4.0 + in Safe Mode holding the key option key when starting Firefox.
    • Under Linux, you can open Firefox 4.0 + with leaving Firefox then go to your Terminal and running Safe Mode: firefox-safe-mode (you may need to specify the installation path of Firefox for example/usr/lib/firefox)
    • Or open the Help menu and click on the restart with the disabled... modules menu item while Firefox is running.

    Once you get the pop-up, simply select "" boot mode safe. "

    If the issue is not present in Firefox Safe Mode, your problem is probably caused by an extension, and you need to understand that one. To do this, please follow article Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems .

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.

    When find you what is causing your problems, please let us know. It might help others who have the same problem.

    I hope this helps!

    Curtis

  • Recovery of the Internet does not work

    Hello!

    My computer (MacBook pro mid-2012)) for a while has a battery fault which means I just have it stationary for a year back. My friend who has the same computer had a drive cable hard failure so I thought she could get just mine and I just have my hard drive rather than in their own country, since it is already stopped, it is not really important for me. This is where the problems started.

    My computer does not now anyway, whether it shows just the map of blinkning with a sign of the issue. No matter how many times I tried to boot into it, it does not work and I do not for the love of my life know what the * could be the problem? I tried all possible combinations of keyboard. Here, someone has ideas in what do I do now? The computer requires something any if it is default or not be plugged into the hard drive slot internal?

    Thank you.

    There is that your wireless network must meet strict requirements, as described in this document, as it cannot have a hidden SSID (network name):

    How to reinstall OS X - Apple support

    .

  • Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

    Key on the keyboard does not work in firefox box when you type in the web site, but it works everywhere else?

    Try Firefox SafeMode to see how it works there.

    A way of solving problems, which disables most of the modules.

    (If you use it, switch to the default theme).

    • You can open the mode without failure of Firefox 4.0 + by pressing the SHIFT key when you use the desktop Firefox or shortcut in the start menu.
    • Or use the Help menu option, click restart with the disabled... modules while Firefox is running.

    Do not choose anything at the moment, just use 'continue in safe mode.

    To exit safe mode of Firefox, simply close Firefox and wait a few seconds before using the shortcut of Firefox (without the Shift key) to open it again.

    If it's good in Firefox Safe mode, your problem is probably caused by an extension, and you need to understand that one.

    http://support.Mozilla.com/en-us/KB/troubleshooting+extensions+and+themes

    Can be caused by an add-on to the AVG.

    When find you what is causing that, please let us know. It might help others who have this problem.

  • Desktop does not work

    Recently I got Dell reinstall Windows for me, and they have restored the backup I had. Everything seemed to work fine. I was re - install my apps, some of the original CD and a few downloads. I also updated to SP 3 Windows.

    Now the things on my desk does not work.
    1. the command run disappeared from the start menu. I went into the properties of the start menu and checked so that it should be established, but it doesn't show up.
    2 double click on any icon on my desktop does not work. To open an application that I right click and select 'open '.
    3. no provision starts from the start menu.
    4. the quick start icons come that if I go into the properties of the start bar and set it and then it doesn't show up when I restart the PC.
    5. nothing in the Quick Start bar opens with a single click.
    6. the search does not work when I right click on start and select search.

    Since the command run does not appear I can't service table to determine if the necessary services are defined.

    I'd appreciate a lot any help to get back on track.

    Glad to hear that everything got sorted out ultimately, and good luck in the future!

  • No icons on my desktop does not work... Help?

    When I double click on all my icons, I get is an error instead of a Web site box. The error says something on a protocol of tp htWindows. Can anyone help?

    Dell Inspiron 1525 under 7

    Hi Skidizmo,

    Sorry for the late reply.  I would say it is extremely common with Google Chrome.  Lets try a few steps and see if we can solve this problem.

    This is because Google Chrome will make itself the web browser by default.  If you go and uninstall Google Chrome with switching on the default browser output, then you are experiencing this problem.  I have a few options that you can try.  Please try Option 1 first before you try Option 2.  Option 2 should be done only if Option 1 did not work.

    Also note that some of these steps, you will be directly associated with system and any deletion or Pack with files can cause the computer does not work.  Please follow the instructions how I tell you.  Perform these steps at your own risk.

    Lets start

    Option 1

    1. Click Start and select Control PanelNOTE: Parameter change display large icons. Look for a section "display by" located on the upper right of the Control Panel. Click on the arrow down and select large icons.
    2. Click on Internet Options
    3. When open Internet Options, click the Programs tab
    4. Click Make Default
    5. Click apply
    6. Click OK

    Restart computer and try again your icons.  See if it works and if not go to Option 2.

    Option 2

    WARNING: You will be altering a hive of system critical files of the operating system.  Deletion or modification of any sort can shut down the operating system of the ownership of work.  Please perform this procedure at your own risk.

    Please follow the steps exactly do not remove or change anything, unless the instructions below tell you.

    First back up the registry.  To do this he follow directions below.

    1. Click Start
    2. In the type in regedit search box and press enter
    3. Click Yes at the prompt of admin commands
    4. When the Registry Editor opens click on file and select export
    5. Name the file regbackup and save it on the desktop
    6. Click Save.

    With the now open register, follow these steps to delete the registry files that put Chrome in place which is the origin of the problem.

    1. Expand HKEY_CURRENT_USER
    2. Expand Software
    3. Extend Classes
    4. Click .html
    5. On the right panel, you will see a default value.  Click on this and select Edit.
    6. Delete the "ChromeHTML" and put in "htmlfile", click OK
    7. Do the same with .shtml, .htm , .xhtml
    8. Restart the computer

    Let me know if this worked for you.

    Thank you

    Tech God

  • \\HOME-server is not accessible. A device attached to the system does not work.

    I use Windows 7 Professional. My network server is WHS V1.

    I have a shortcut on the desktop to \\HOME-SERVER on my W7 machine.
    All of a sudden it has stopped working.
    I get the message
    \\HOME-server is not accessible. You might not...
    A device attached to the system does not work.

    I found that the command line net view \\HOME-SEVER gives (and by typing this in an address bar of the Explorer does not work)
    31 system error has occurred.
    A device attached to the system does not work.

    And this net view \\HOME-SERVER\Music gives (but in typing this in a browser address bar works!)
    53 system error has occurred.
    The network path was not found.
    However, net view 192.168.1.99 (my server address) correctly list the share on the server names (and entering \\192.168.1.99 in Explorer address bar works).
    I did a system restore until the problem occurred first to rule out any changes to the system.
    The problem occurred again.
    This means that my Sync Center shows none of my synchronization partnerships.
    Can anyone suggest the setting or service that must be corrected to solve system error 31 problem?
    TIA
    Hello
     
    The question you have posted is related to Windows home server and would be better suited in the Windows Home Server Forum.
    Please visit the below mentioned link to find a community that will provide the support that you have requested.
    http://social.Microsoft.com/forums/en-us/category/WindowsHomeServer/
     
     
    Thank you
  • I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    I need to reinstall Adobe Acrobat 9 standard on the net, I have a new laptop and the CD does not work

    Copy the contents of the cd in a desktop directory.  install from this directory.

    or

    Available downloadable Setup files:

    Download and installation help links Adobe

    Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

  • iPhone 5: objective of the camera does not work after update iOS 10

    Hello everyone.

    I swear to you that I have no idea how do... after a few weeks since the release of iOS 10, yesterday I force myself to be updated - the situation with iOS 9.3.2 became crash and unbearable lag every second. The fact is that I update, I like the system and use it for a few hours. Check the camera this morning, I see that the focus does not work. Now I also see AE / AF Lock, light changes whenever I tap on one side or the other, but not to focus. Not even close or far, nothing to do. I have not tried in the settings to do a full erase, I had no way to restore it since I do not have a backup.

    I tried to clean the lens - already cleaned, I tried to give him a few small nicks and follow the many guides online. I rebooted and everything done. Nothing has changed.

    The last photo was taken last night and has been developed. So I don't think it's a hardware problem and if so, how has it happened? A few hours ago the iPhone is fallen, but tell me if it makes sense. If it's a software problem, what could I do?

    I would avoid the assistance. It is a used iPhone, never jailbroken. I don't have a lot of confidence with the help, in 6 or 7 years he never went - iPhone always bought used and always worked very well.

    PS: I have no way to get into DFU, as iTunes does not see my iPhone. Up to iOS 9 that I had no problem even if I had enough of the device with the cable isn't original, but barely now lets load ("This accessory may not work").

    Hello

    I also have an iPhone 5 and I tested the question and mine is fine, how bad was the fall that you mentioned? Sometimes problems can come and go. Also try to reformulate your device.

    After this answer please.

    Thank you Will

  • Fast forward on the videos does not work on tvos 10

    Hello

    After updating to the latest tvos, 10, fast forward on the videos does not work. I can only fast forward when I press on the right place on the pavement and fast forward 10 seconds in time.

    Someone else has the same problem? Is this a bug in update?

    Hello. It seems to work as described here https://help.apple.com/appletv/#/atvb7944597f press next to move to 10 sec, press and hold to fast forward. They have it changed again?

  • My update of the software does not work

    My update of the software does not work and I can't return to the main he keeps on telling me to restart the computer and then go through the software update settings, then it ends by does not and then it tells me to restart and restart and restart again and again

    What updates you trying to install?

  • I can't select or copy text on Firefox for Android 26.0.1 (device: Samsung Galaxy Note 2) OS: Android 4.3. Long press on the text does not work. )

    Can't select or copy text on Firefox for Android 26.0.1.
    Device: Samsung Galaxy 2 Note.
    OS: Android 4.3.
    Long press on the text does not work.

    I would ask someone to check that...

    I'm glad to hear that your problem has been resolved by using the beta version.

    If you have not already the case, please mark this thread as solved by the solution of marking.

    This will help other users experience similar problems helps to find faster and more efficiently.

    I hope that you will continue using our products and we thank you for contacting the Mozilla Support.

  • Yahoo speaker icon Chinese big5 dictionary web to pronounce the Word does not work on firefox 26,27.

    http://tw.dictionary.search.Yahoo.com/search;_ylt=A3eg.nXHREBSxRUAzBh7rolQ?p=test & fr = SFP
    the speaker icon of web for the Word does not work on firefox 26,27. It works on firefox 24,25.

    Hello mizuc, thanks for reporting that - I can reproduce the problem and get an error in the web console:

    Media resource http://___.mp3 could not be decoded.
    

    Edit: I have filed bug 919572 for this question

  • no service to customer without having to pay when the product does not work?

    no service to customer without having to pay when the product does not work?

    You will need to tell us more of the history for anyone to be able to give advice. The WHOLE story would be great!

Maybe you are looking for