Unable to connect XPMuser mode

Similar Questions

• Unable to connect to the network without wire stuck in airplane mode

  Hello

  I have a computer laptop inspiron 15r with Windows 8. My most recent problem is surface today.  Suddenly my laptop kept disconnecting my wireless connection and turn on airplane mode.  Finally, it is stuck in airplane mode and I am unable to connect wireless. I have a Dell 1705 Wireless card.  I tried everything, including restoring the default settings.  It also shows that my Ethernet connection is disconnected.  It's not since I have my Tablet connect correctly.  This all started when I tried to check the updates of windows. Any help is appreciated.  I have never known as many problems with a computer. It seems that I'm fixing always something.

  bela1950,

  In addition to what Jim said...

  Airplane mode - enable or disable in Windows 8

  Rick

• (Redirected) Unable to connect to, I.e. in Normal Mode

  I use Vista on a Studio1735 and I am unable to connect to Internet in Normal Mode - however, I am able to connect to, that is in Safe Mode. This has been the case regularly for 2 weeks. I know that the problem is not with the WiFi gateway because the other 2 computers in the House are connected. Any help will be greatly appreciated. Thank you in advance.

  Hi Lynn l.,

  You may have a virus. I will recommend you to repost this in the forum virus and someone will help you.

  http://en.community.Dell.com/support-forums/virus-spyware/

• I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  I am unable to connect to the virtual pc Xp mode when I try to open a session given an error unable to connect to the domain that a domain controller is down or unavailable,

  Hi Rajendra Patil,

  I suggest you to ask your question on the TechNet Forums.

  Windows Virtual PC and XP Mode.

  http://social.technet.Microsoft.com/forums/en/w7itprovirt/threads

  I hope this helps!

• problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Problem of bluetooth of Windows 8. Phone paired but unable to connect, says Windows phone in offline mode

  Somasundaram Mohammed. Thank you for your help and maybe you will pass on the solution to all those in need. All that is necessary is to download Bluetooth Stack Toshiba 9.10 and run it. However be careful because version 9.0 of battery is not compatible. I have now my two Android phones connected.

  Thanks again

  John harney

• DataGuard open read only mode: PING [ARC2]: unable to connect before Heartbeat "keeps." The error is 88.

  Hello

  I created a data guard with 1 physical and 1 relief database.

  Database: 11.2.0.4 - Enterprise edition

  Everything is OK, if the wait is still in State of Mount.

  but.

  When I want to open the day before in read-only mode, log shipping is stop.

  I found az error in the primary newspaper:

  PING [ARC2]: Unable to connect to the standby Heartbeat "keeps." The error is 88.

  
  

  The newspaper of Eve:

  alter database open read only

  AUDIT_TRAIL initialization parameter is changed to OS, as DB is NOT compatible to the database open with read only access

  Wed Dec 03 12:02:02 2014

  SMON: enabling cache recovery

  Dictionary check start

  Verification of the complete dictionary

  Database character set is AL32UTF8

  No Resource Manager plan active

  off replication_dependency_tracking (no replication multimaster async found)

  Physical standby database opened for read only access.

  Completed: alter database open read only

  Wed Dec 03 12:02:03 2014

  Mo 4977 db_recovery_file_dest_size is 2.29% used. It is a

  user-specified limit on the amount of space that will be used by the present

  for the files related to the recovery of databases and does not reflect the amount of

  space available in the underlying file system or ASM diskgroup.

  Thanks for your help and sorry for my bad English.

  LACI

  Oracle error: ORA-00088

  Error description:
  Cannot be executed by the shared server

  Cause of the error:
  Debug command issued on a shared server.

  Action:
  Run the command again using a dedicated server.

• Maintenance mode, unable to connect: 514 error connection to the instance of service pass vmds

  Hi all

  I do a few patches manually on ESX 4.0 host.  I forgot to get into maintenance mode, tried to patch and had an error on entering maintenance mode.  So I tried to get into the mode of maintenance with the following command:

  vimsh - n hostsvc/e/maintenance_mode_enter

  I get these messages:

  Current working directory: / root

  vmaCore: initSSL: make versionCheck = true

  handshake Timeout = 20000000

  Unable to connect: 514 error to connect to the instance of the service host-vmds

  Not connected

  Not connected

  Someone has ideas of what happens and how to solve?

  Thank you.

  Take a look at reboot on an ESX or ESXi Server management agents and VMware: hanging out on an ESX Server maintenance mode (9639912)

• A ' test mode windows 7 build 7600 "ran Mr. difficulty to remove and now unable to connect to the Internet".

  Everything worked fine until "watermark of Mr. fix - it deleted now unable to connect to I Internet.» Took the floor to Internet provider tech and HP tech

  Hi Donnie,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. what fixit did you run?

  2. you receive an error message or error code?

  I suggest you run the network troubleshooter and check if it helps.

  Using the troubleshooter from network in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

  You can also see the following article for more information on troubleshooting internet connection problems:

   

  Why can't I connect to the Internet?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-i-connect-to-the-Internet

   

  Hope this information helps. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

• Unable to connect

  Hi all

  I have a Power Mac G3 (blue and white case), processor 400 MHz, 512 MB RAM, 120 GB HDD and currently running OS 9.2.2/OS X 10.4.11 and I am unable to connect to my user profile on OS X.

  The problem started as a loop connection - I have entered my password only to be sent back to the login screen. Following the advice of another site, I deleted 'Preferences' of the user records and records of library system. The system now creates new folders, boots to the login screen, however to enter any letter on the keyboard results in the system locking up in a cursor tip / the "occupied" switches to the Rainbow ball and they're there - I can't do anything else but reset the system or put it to sleep with the power button

  I've done everything I can think of to try and fix it - safe mode displays the same symptoms above, chatty start freezes with a bluescreen once started, fsck in single user mode says that the disk is ok, like the disk first aid under OS 9. I also tried to reconfigure the memory (one of the modules is problematic intermittently, but no problems do not appear with OS 9 (and have not been apparent in the past with OS X) when he's not working - I tried to remove all the modules problem but possible connection problem)

  One thing I have not tried yet is to do a system repair / archive and install - my installation disc is an old version (10.4.1) which is currently installed - this would have an effect on the system in its current state with all my apps and folders present?

  Thank you very much

  Are you sure that your keyboard does not work properly?

• Tried all your suggestions and always receive "Unable to connect" when using ANY search engine.

  Can't use any search engine of FF 40.0.3 on Macbook Pro model with 10.8.5 OS 9.2. Receive "Unable to connect" message when you try to use a search engine. Other than the search engine and Mozilla Web sites to connect properly. 40.0.3 on another Mac FireFox works fine without any problems.

  In addition, I can not access the FF "Get modules" page or the home page of Mozilla. Search engines will connect not their home page or the search bar. Problem just started. I had previously been upgrade and have resorted, FF 40.0.3 without problem when it was issued. Solutions of attempts included refresh FF, launch FF in safe mode, run with all plugins disabled, graphics hardware acceleration disabled. None of these fixed the issue.

  Had already tried your suggestions, without success, but has once again to be sure. Without success. However, I made a further exploration of my own and found out that IPv6 is set to "Link Local" only in my router. I have reset on 'Automatic', the router reset to update, and my problem was solved. So it was the IPv6 setting (unlikely) or the router reset (probably) that solved the problem, or it is your suggestions I tried and did not work, COMBINED with the router reset which solved the problem (quite possible).

  Thanks for the comments!

• Suddenly 39.0 FF is "unable to connect" to any web page

  I use almost identical installations of 39.0 FF on both computers Windows 7 Pro. On computer 1, for the last two hours, I got "unable to connect" on each URL I tried. It can access things stored locally, such as troubleshooting information. FF on computer 2 is fine, and Chrome and IE work fine on computer 1.

  The problem started watching a movie on Netflix streaming on computer 1. The image suddenly froze and the speakers emitted a wicked repetitive noise - maybe it was 2 seconds of the movie soundtrack play again and again. Commands from the computer totally locked up. I kept only the noise of voltage with power button on the computer. I restarted the computer in safe mode, and then it restarted in normal mode. Now, everything on the computer seems fine - except Firefox.

  I tried to restart FF in safe mode; same problem in the corresponding mode. I saved copies of information for troubleshooting in safe and regular mode, and a copy of the submitted crash reports also list. I'll share these if you tell me how. (Can't do it with the button "Share data", of course, because I can't go to this form to ask a question on computer 1 - I am posting this to computer 2)

  The only thing I have not tried is "Refresh Firefox". I'd really rather not do that, because it will scan all my modules and customizations.

  Would appreciate any help you can offer.

  Start the computer in Mode safe mode with network support Windows (on the startup screen, press F8) as a test.

  • http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/

  ....
  You can check problems caused by malware.

  • https://support.Mozilla.org/KB/troubleshoot-Firefox-issues-caused-malware

  Make a check of malware with several malware scanning of programs on the Windows computer.
  Please scan with all programs, because each program detects a different malicious program.
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• Unable to connect to the website of 'http', steam and App Store

  I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

  Here what I was trying to fix my problem:

  1. I try to restart the computer, then reconnect to my wifi - nothing fixed

  2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

  3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

  4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

  5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

  6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

  7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

  What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

  Is your date and time is set correctly? 5 minutes from the perfect?

• Unable to connect to the software update server (127.0.0.1)

  I'm under El Capitan 10.14.4

  I'm unable to view or download from the App store apple updates. Everything else in the app store works fine except the updates and the updates, I get 3rd party updates, but nothing from apple. If I click on updates at the top of the app store icon I get the following error

  

  Troubleshooting steps I went through far

  • I restarted my mac a few times
  • I did some research on Google and messages more speak of iworm, fortunately I could find no trace of an infection by the worm, I scanned my machine using Sphos and ClamXav and haven't found anything relating to iWorm. I am also unable to find all the files, he leaves behind him, so I think I'm safe in this regard.
  • I checked the hosts file and there are no entries that should not be there, hosts file is copied below.

  # Database host

  #

  localhost # is used to configure the loopback interface

  # When the system boots.  Do not change this entry.

  ##

  127.0.0.1 localhost

  255.255.255.255 broadcasthost

  : 1 localhost

  • The /var/log/install.log which appear relevant lines are;

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: Scan for pid 435 client (/ System/Library/CoreServices/Software Update.app/Contents/Resources/softwareupdated)

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: out of time scan = 0.2

  May 26 09:44:02 macbook-pro softwareupdated [435]: SUScan: error in scan: error Domain = NSURLErrorDomain Code =-1004 'unable to connect to the software update server (127.0.0.1)." UserInfo = {NSErrorFailingURLKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, SUCatalogFetchOverrideURLString =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, NSLocalizedRecoverySuggestion = check that your network connection is working normally.} {If there is no problems with your connection, contact your network administrator for assistance., NSLocalizedDescription = can connect to the software update server (127.0.0.1)., SUErrorRelatedCode = SUErrorCodeScanCatalogNotFound, SUErrorUpdateServerName = 127.0.0.1, NSErrorFailingURLStringKey =http://127.0.0.1/content/catalogs/others/index-10.11-10.10-10.9-mountainlion-lio n-snowleopard - leopard.merged - 1_disabled.sucatalog, _kCFStreamErrorDomainKey = 1, _kCFStreamErrorCodeKey = 61}

  May 26 09:44:02 macbook-pro softwareupdated [435]: Scan received the error unable to connect to the software update server (127.0.0.1).

  May 26 09:44:02 macbook-pro softwareupdated [435]: updates marked ramps

  • I can ping swscan.apple.com and she is resolved to 17.164.1.22 which is the same IP that also resolves the mac next to me (which gets the update)
  • I cannot telnet on port 443 to swscan.apple.com and it connects.
  • I have a mac in yosemite next to me who can see the updates so I suspect that doesn't pose any problems with the service itself rather something on why machine.
  • I started in safe mode, and while in safe mode, I get the same error.

  I am at a complete loss what to do next short of wiping and restore from a time machine backup, can anyone help please

  You can try to disable the Sophos websheild and ClamXav if she has one. Even better would be to uninstall both and test.

  FWIW, it is never a good idea to have 2 av programs installed.

• At the opening of some Web pages I get a msg 'unable to connect to the server', but it works very well in startup

  The last few days during the use of the internet, some Web pages will not be not open. I get a msg of error saying 'unable to connect to the server', but it works very well with other sites such as Facebook and YouTube.  This happens when I use Safari, Firefox and Chrome.  Yet if I'm in Safe Boot mode it works fine.  I exaggerate the App installed VPN and when I am in normal mode and connect to the VPN exaggeration, all Web pages work correctly. I searched the net for days trying to find a solution but nothing I tried worked.  I'm not very computer savvy either so don't know much of what I do with this technical stuff.  I emptied the caches, but that did not work.  Following the advice of an answer to another question on this forum that was similar to mine, I went into the Terminal and performed a diagnostic test.  I don't understand all the information in this essay so hope someone here can decipher. The report is quite long, but this is the beginning of the pasted below.  Help, please!

  The system version: OS X 10.11.1 (B 15, 42)

  Kernel version: Darwin 15.0.0

  Boot Mode: Normal

  Model: MacBookPro11, 1

  FileVault: on

  The System Diagnostics

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  2016-04-13 desmoides crash

  Diagnosis of the user

  2016-04-12 AssetCacheLocatorService crash

  Accident of GarageBand 2016-04-12

  Kernel messages

  Apr 12 15:34:15 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 15:34:15 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 15:34:18 NTFS-fs warning (device/dev/disk0s4, pid 165): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 15:35:41 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 520; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45019

  Apr 12 16:45:59, launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 16:45:59, launchd process [1] disable the CPU - the system-wide limit

  Apr 12 16:46:31 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 16:46:31 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 16:46:33 NTFS-fs warning (device/dev/disk0s4, pid 155): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 16:47:52 iCoreService process [94] taken causing excessive Awakenings. Awakenings (per second) rate: 557; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45052

  12 apr 17:20:51 0xe00002db questioned the file opening error

  -the last message repeated 1 time.

  Apr 12 19:39:26 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 19:39:26 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 19:39:28 NTFS-fs warning (device/dev/disk0s4, pid 158): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 19:40:49 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45066

  Apr 12 20:46:58 launchd process [1]-l' system of limitation of disabling i/o level

  Apr 12 20:46:58 launchd process [1] disable the CPU - the system-wide limit

  Apr 12 20:47:21 AssertMacros: tmpData (value: 0x0), leader: /BuildRoot/Library/Caches/com.apple.xbs/Sources/AppleCredentialManager/AppleCre dentialManager-82.10.1/AppleCredentialManager/AppleCredentialManager.cpp, line: 765

  Apr 12 20:47:21 init: error getting of PHY_MODE; using MODE_UNKNOWN

  Apr 12 20:47:23 NTFS-fs warning (device/dev/disk0s4, pid 157): ntfs_system_inodes_get(): Windows is put into hibernation. Will not be able to get back on read-write. Run the chkdsk command.

  Apr 12 20:48:44 deal with iCoreService [94] taken causing excessive Awakenings. Awakenings (per second) rate: 545; Maximum rate (per second) Awakenings: 150; Observation period: 300 seconds; Life of the Awakenings of task number: 45476

  Apr 12 21:54:58 opening error 0xe00002db questioned the file

  -the last message repeated 3 times.

  Apr 13 01:42:49 deal with com.apple.WebKit [12265] wire 546051 caught fire CPU! He used more than 50% of the CPU (actual recent use: 93%) more than 180 seconds. Screw using the processor to life 90,030145 seconds, (89.468979, System 0.561166 user) information book: balance: 90000757669 credit: debit 90000757669: limit 0: 90000000000 period (50%): 180000000000 time since last filling (ns): 96164617988

  Hi AussieEgypt,

  Thank you for using communities Support from Apple.

  If a problem does not occur when it is started in safe mode, then you have already determined that the problem was isolated to a few 3rd party software running on your Mac.  Take a look at the information below to start with the removal of some elements of start-up and connection and see if the problem persists:

  Test your login items

  1. Choose the Apple menu > System Preferences, and then click users and groups.

  2. Click on your account under the current user name, and then click connection points.

     Make a list of the login items, you will need to remember later.

  3. Select all the elements of connection, and then click the button Delete .

  4. Choose the Apple menu > restart.

  5. If this solves the problem, reopen the preferences users and groups, add the elements of connection one at a time and restart your Mac after the addition of each of them.

     If the problem persists, follow the steps above to remove only the last element of connection that you added.

  OS X El Capitan: If you think you have incompatible connection points

  See you soon.

• Unable to connect to other wireless networks

  RE: Unable to connect to other wireless networks

  • My computer is a HP Pavilion dv7 1232nr Entertainment Center
  • My OS is Windows Vista 64 bit
  • I have installed many things over the past year, but know that at some point, I was able to get on free Wi - Fi in hotels

  I am able to connect to my network, but when I try to connect to others, I'm unable to do. I have their password and my computer SHOWS I have a connection, but actually I'm not. When I try to connect to the Internet, the server is not found. I called the support/supplier for the last network owner and he told me that even if I "thought" I was online, I really wasn't. He said that it is probably a router configuration for that person that does not correspond to my computer. As I was just visiting, of course I didn't mess with their router. This happened to me twice, with once the provider is the same as mine, but the only way I could get connected with a hard link.

  So far, the only thing I did is to see if I could connect to free wireless (municipal library) and was unsuccessful. I think the problem is with my settings, but am not sure. I have to be careful to change anything because I can't afford to lose my connection at home because my job depends on it.

  Any suggestions?

  Thanks for any advice you might be able to share.

  Hi, Pat:

  I am very confident that if you download and install the driver from the link below, your problem will be solved.

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en & CC = US & prodTypeId = 321957 & prodSeriesId = 3688868 & swItem = ob-99392-1 & mode = 3

  Paul