Unable to display the computer properties

Similar Questions

• SP1 for Vista is installed but doesn't show is not in the computer properties

  Reinstalled Vista professional to replace the update to Windows 8 Pro incompatibility with my hardware. Update SP1 installed successfully several times, but always not shown in 'The computer properties' SP1! By thus impossible to reinstall Norton Security because there are installed SP1.

  From Internet Explorer

  Original title: SP1 for Vista Business

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  He will tell you he which SP you have installed. so, it is not installed.

  Choose the download of 'bit' OK to use to install Service Packs, installation of SP1 first if it is not already installed.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• Unable to display the remote folder: the remote folder F:/wamp/www / "MYWEBSITENAME" / is not accessible or does not exist.

  In CS4, all of a sudden, I get the error "unable to display the remote folder: the remote folder F:/wamp/www /"MYWEBSITENAME"/ is not accessible or does not exist.»

  I'm in Manage Sites and test the file in the remote folder and it says "Dreamweaver connected to your web service successfully.

  I have not changed anything.  I had this once before a few years ago and just copied on the site of a new name and that fixed it, but it does not for the moment.

  Help.   Any ideas?  Thank you

  When you click the expand button in your files window, whose icon is selected in the upper part?

  

  The middle one is the test server (list of lightning bolt), if you try to download, you will need to switch to the remote server (standard search bullet list icon).

  If you do not have a local server running on a drive of F, and you try to put it on the test server, you will get an error saying: there is no. Is it happening?

  If you do not have a local server running on your F drive, remove the test server info, it is not necessary.

• Unable to display the results of a detailed report or the results of a questionnaire which is inbedded in the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose '

  Unable to display the results of a detailed report or the results of a questionnaire in a bed within the project.  I checked the preferences of quiz and enabled for the draft declaration.  I use SCORM 1.2.  My LMS is not listed (MCN) and so I chose 'other LMS standard.  Any ideas on why I see the results?

  Publish your SCORM SCORM Cloud and test if it will show you the results you want.  If so, then your problem is with your LMS.  If this is not your problem may be due to something in the settings of your current project.  Eliminate one thing at a time.

• Unable to display the Bitmap in word document.

  Original title: Bitmap image displayed in xxxyyyxxyyyy.

  Documents Word scanned in Bitmap displays in xxxyyyxxyyyy when I open it up.  It is always used to open it in Word in its original appearance.

  New problem for me.  How do I rectify this.  'Open with' gives me the possibility of the Windows Viewer but I don't want that.  I want to open it in Word.

  Thank you.

  Hello

  1. don't you make changes to the computer until the problem occurred?

  I suggest you to see link below and check if it helps.

  How to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859

  Hope this information is useful.

• Windows update downloaded and installed sp1 and sp2. Both show as successful in the history of the update but does not show in 'the computer properties.

  Windows update downloaded and installed sp1 and sp2. Both show as "successful" in the history of the update however my computer properties tab represents OS is Windows Vista Home Premium and shows no indication of SP1 or SP2. Is there a process of 'activation' these? Should not be done automatically? Any help is appreciated!

  Hello

  Thanks for posting the request in the Microsoft Community.

  Method 1:

  I would say as you to see the link to use the System File Checker tool (sfc) to troubleshoot missing or corrupted system files in Windows:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2:

  Step 1:

  I suggest to refer to the article and try to run the system update tool:

  System update scan tool corrects errors of Windows Update in Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  Step 2:

  You can check the link and try to obtain the latest Service Pack for Windows Vista:

  How to obtain the latest Windows Vista service pack

  http://support.Microsoft.com/kb/935791

  Let us know if it helps.

• Unable to resolve the computer names of task force

  My Windows Vista laptop only shows itself as visible in the 'file' network and is unable to connect to other computers manually by typing the name (\\computer-name). My Windows 7 and XP workstations can view each other and the Vista laptop except they can't connect to the laptop (network in inaccessible resource).  All 3 are in the same workgroup and I tried to connect without a firewall as well.  The strange thing is when I try to ping other computers from the laptop, the "host is unreachable" if I ping the computer name, but very good pings if I ping to the IP address. If after the ping of the IP address, I ping the hostname again it pings fine. After that Windows 7, the computer icon visible and accessible and the XP machine is manually (but no icon) for a short period of time. After 5-10 minutes or I stop/standby host names can be resolved again and I have to start with ping them.

  I have no idea why, but I've uninstalled and reinstalled the network card driver and it fixed the problem.

• Unable to display the output of a concurrent program

  Dear members,
  
  I use Oracle R12.1.3 Vision Instance.
  
  I ran the program create accounting. When I click on the button to display output, the browser gets displayed and gets immediately closed. I'm unable to view the output.
  
  Can someone help me please to solve this issue?
  
  Thanks in advance.
  
  Kind regards.

  I faced this problem once. That's the problem with the settings of Internet Explorer.
  Check in the settings of IE-> tools - > Internet Options-> Security tab-> the zone (Intranet, for the most part)-> enable downloads.

  By
  VAMSi

• Often when I return to my home page, I get this message: unable to display the page of the page you are looking for is currently unavailable.

  The only time where I get this message "cannot display the page of the page you are looking for is currently unavailable ', is when I come back to my Yahoo home page after visiting other websites and click"home. " My SSL settings are correct; I tried to clear my cache, log out and go back online, repaired broken clusters, etc. I'm out of ideas.

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

• Unable to start the computer by using the power switch - y480

  Recently, I bought the Ideapad Y480.

  I could not start the computer using the power button. I had to use the oneKey recovery to start the computer and restart the system in the recovery menu to restart the computer.

  What should I do now?

  
  

• Unable to start the computer after the installation of Windows updates

  original title: same problem with the other oddities.

  I also have a computer down the update.  Although I tried several times to start the computer from the installation CD re, when I get to the page where I have options to fix or exit, locks from my computer to the top and will go no further.  Suggestions how to get the computer to boot the CD and allow me to choose the repair option without locking up?  Thank you!

  I finally managed to get the reinstallation CD to load.  I also spoke with telephone tech support at Microsoft who helped me to descend KB977165 my system.  After that was removed the computer booted without error.  By MS tech, I am also running the anti-virals and malicious programs to see if they detect all the other infections.

  Originally, the CD would load to the point of being able to choose between the options: continue to fix or exit.  At this point, the computer froze upwards and would not all repairs in order to remove KB977165.  Microsoft launches a call again tomorrow in order to install safety free bug so far.

  Thanks for your reply.

• Unable to resume the computer from sleep mode

  Original title: monitor going to sleep then will not return without tapping computer power button. used to click just a key

  This monitor goes to sleep. have a very hard time to bring. used for any key just click and the monitor lit up back. I must now press the power button to turn on. This may turn off the computer.

  Hi Larry Lane,.

  ·         What version of the operating system is installed on the computer?

  ·         Have you made changes on the computer before this problem?

  Follow the steps in the article.

  The problems of wake the computer from sleep mode

  http://support.Microsoft.com/kb/266283

  For reference:

  Sleep and extended: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions

• Unable to start the computer - boots of BSOD

  Dell Dimension 210/9200c Windows XP Pro SP3 desktop

  Here's what I spent...

  Start-up, enter the admin password.

  Floppy drive seek failure

  Strike F1 key to continue, F2 to run the utility series

  If I choose the F1...

  Loading PBR for descripto 2... In fact.

  Playing a disc error has occurred

  Press CTRL + ALT + DELETE to restart

  I press CTRL + ALT + DEL and it leads to FAILURE to SEEK the FLOPPY DISKETTE.

  If I choose to F2, it goes to creating useful and I don't know what to try to change the problem.

  If I press F12 and go to the start menu...

  SafeMode to start the BSOD

  I tried to boot from the CD and use my recovery CD and the result was...

  Window, set up ran with the establishment is responsible (file exchange...), then he went up to the game starts windows.

  Here's what came...

  A PROBLEM HAS BEEN DETECTED AND WINDOWS HAS SHUT DOWN TO PREVENT DAMAGE.

  IF IT IS THE FIRST TIME YOU'VE SEEN THIS STOP ERROR... RESTART YOUR COMPUTER

  CHECK FOR THE PRESENCE OF VIRUS.  REMOVE ANY NEWLY INSTALLED HARD DRIVES OR HARD DRIVE CONTROLLERS.

  CHECK THE DRIVE FOR THE CORRECT AND COMPLETE CONFIGURATION

  RUN CHKDSK/F TO CHECK FOR HARD DRIVE CORRUPTION, AND THEN RESTART

  TECHNICAL INFO:

  STOP: 0X0000007B (0XF78DA63C, 0XC0000034, 0X00000000, 0X00000000)

  I can't the system to start.  I haven't added hardware or software.  I think that the computer has restarted after downloading some updates, but I can't to start or restore system. What can I do?

  Yes, I can get to this screen.  After you have clicked on enter, it looks like this:

  SET UP WINDOWS

  __________________

  __________________

  downstairs "SET UP IS LOADING FILES (*)...

  Then it turns down in "SET UP START WINDOWS"

  Then, it goes straight to the BSOD.

  I tried several times and he always goes for the BSOD.

  In the menu Setup, I ran a hard drive diagnostic and it showed this:

  "RUNNING HARD DRIVE DIAGNOSTICS, PLEASE WAIT...

  DRIVE 0: ST3320620AS

  IN CASE OF FAILURE.  RETURN CODE: 7

  Is this to say that the HD is shot?

  Your hard drive may or may not be at fault. Error code 7 could mean just corrupted hard disk controllers. This could also be the reason for the bsod.

  Enter your bios and follow the instructions below.

  1. start-up (Dell logo), press F2 to enter the BIOS

  2. expand the section "readers".

  3. go in "SATA Operation."

  4 change that "RAID Auto/AHCI" to "RAID Auto / ATA.

  Furthermore, if your bios does not have this option simply switch from SATA IDE mode.

• Unable to stop the computer in the start menu.

  Original title: stop problems

  I cannot shut down my computer (laptop) in the start menu. The option is there, but when I click it the computer does not turn off.

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  He helped?

• Unable to display the Find tab

  I know it has been asked and answered before, but I can't find it... : if I use LabWindows / Help / CVI libraries / help topics the installation wizard appears, but it fails with the error message: cannot display the tab search (177). If I remember correctly, he had something to with a gid file?...

  Thank you!

  Hello Wolfgang,.
  You can find a useful to http://www.ni.com knowledge base document with "+ cvi + online + help + index" in the search box and press Seek. The title of the knowledge base is "Index tab is empty or incomplete in CVI online help" and this is ID of Document 1UDF7T9O. I hope that this solves your problem.

  Jeremiah
  Technical sales engineer
  National Instruments
  http://www.NI.com/ask