Unable to set the root of context for static images folder

Similar Questions

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• Unable to set the transparency of the taskbar to laptop with windows 7.

  Original title: Please read my problem and give a solution as soon as possible.

  HII all... I'm unable to set the transparency of a taskbar for laptop with windows7 operating system? He demonstrated a tab to find out "trouble shoot problem and sero effects transparency" and shortly after clicking the laptop turns on the screen several times...

  Hi Mary,

  We need additional information to help you with the problem of transparency, please answer the following.

  1. which antivirus app do you use?

  2. do you use wired or wireless Internet?

  3. What is the brand and model of the computer?

  If the graphics card and driver were installed after that Windows 7 was first set up, depending on the manufacturer, you may need to update the computer performance index, which will automatically enable Aero. I suggest update you the display update driver and check the status of the issue.

  Update a hardware driver that is not working properly.

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  If the problem still exists; Keep the computer in a clean boot, run the Aero Troubleshooter and check the status of the issue.

  Guided Help: the problems of Aero in Windows 7.

  http://support.Microsoft.com/kb/976170?WA=wsignin1.0

  I hope this helps.

• Unable to set the ip address of network client hosted after the creation of WIFI hotspot.

  Original title: PROBLEM CONNECTING WITH MY LAPTOP WIFI HOTSPOT INTERNET

  Hi all

  I am able to use the Internet to my hotspot of the Tower, when the source of the internet is Public or private wifi.

  so I know the cmd commands of window for hotspot and the client settings (sharing of customer hosted network, address assignment IP etc.,)

  but the problem I am facing is slightly different

  I use my datacard to cdma wireless broadband as my source internet connection(Reliance netconnect +)

  When I try to create for this hotspot, as usual I am able to create the hotspot and be able to share the internet for hostednework customer.

  but I am unable to set the ip address for the network hosted client, if I try to put 192.169.137.1 and 255.255.255.0 ip

  as soon as I close the window, the IP also disappears

  When connect my android phone to this hotspot, it is able to connect, but there is no internet connectivity.

  When I check the client for transmission of package hostednetwork every two envoys and received packet is past, I mean transmitting

  So what caused the rupture in internet connectivity but success hotspot connectivity?

  check the screenshots...

  can u help me...

  It's a bit complicated

  

  

  

  

  Hi Daniel,.

  Advanced networking issues are supported in the TechNet Forums. I suggest you send the request in the TechNet community.
  http://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w8itpronetworking

  Hope this information helps.

• ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)

  I checked archivelog dest everything ok, power logs archived bit time, everything ok, I wondered what could cause this and how to solve this problem permanently.
  
  
  Log queue alerts
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-19510: unable to set the size of the blocks of 74905 for the file ' / archive/gdwp/gdwp_1_18207_654896926.arc ' (blocksize = 512)
  ORA-27037: unable to get file status
  IBM AIX RISC System/6000 error: 2: no such file or directory
  Additional information: 9
  Fri Jul 31 06:10:08 2009
  Arc0: Error 19510 closing log file archive ' / archive/gdwp/gdwp_1_18207_654896926.arc'
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:08 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:08 2009
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:08 2009
  Errors in the /oracle/admin/gdwp/bdump/gdwp_arc0_1220702.trc file:
  ORA-16038: log 1 # 18207 sequence can be archived
  ORA-19510: unable to set the size of the blocks of file ' ' (blocksize =)
  ORA-00312: thread 1 1 online journal: ' / db01/oradata/gdwp/redo01.log'
  Fri Jul 31 06:10:11 2009
  ARCH: Stopped archiving, error occurred. Will continue to retry
  Fri Jul 31 06:10:11 2009
  ORACLE Instance gdwp - archive error
  Fri Jul 31 06:10:11 2009
  ORA-16014: log 1 sequence # 18207 not archived, no available destinations

  DBA2008 wrote:
  Notes 560204.1 suggest that to get rid of the generation of the trace file, is - it safe?

  I won't read the note at the moment but would surely say they told you to check the destination where the files are current. Did you do that? Raise a SR with OSS, to get their approval before doing something like what you try. Its you only who would face consequences, good or bad, no one else so better take a safe approach and the first approval of OSS.

  HTH
  Aman...

• The system is unable to complete the update of security for Windows XP (KB2661637).

  Original title: update security for Windows XP (KB2661637)

  The system is unable to complete the update of security for Windows XP (KB2661637).  How can I get my system to accept the update?

  Hi Joseph,.

  You receive messages or error codes?

  You can reset the default Windows Update components and check if you can install the update.

  How to reset the Windows Update components?

  You can also try to download the standalone update package and check.

  Update security for Windows XP (KB2661637)

• I am running vista ultimate SP2 32 bit. I'm unable to complete the installation. Support for koadak says that I need to update my windows install. When I go on the site microst, I don't know that one to download. Help!

  I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for koadak says that I need to update my windows install.  When I go on the site microst, I don't know that one to download. I am running vista ultimate SP2 32 bit.  I'm unable to complete the installation. Support for kodak says that I need to update my windows install.    Help!

  Update your OS via windows update (start > Control Panel > Security > windows update).

• I get "failed to set the refresh attribute COMMIT for the materialized view" when I try to create a MV using a table and another MV

  Experts,

  I'm trying to create a YOUNG refreshable ON COMMIT MV (xyz) using a table (circuit) and quickly updateable on validation MV (abc), but get an error:

  SQL error: ORA-12054: cannot set the attribute ON COMMIT refresh for the materialized view

  12054 00000 - "cannot set the refresh attribute COMMIT for the materialized view.

  * Cause: The materialized view did not meet the requirements for update to

  moment of validation.

  * Action: Specify only valid options.

  1] MV abc
  = MV abc defined as below =.

  CREATE MATERIALIZED view abc_MV

  Immediate CONSTRUCTION

  REFRESH QUICKLY YOU COMMIT using constraints of trust

  WITH ROWID AS SELECT n.*,.

  n.ROWID noderowid

  node n

  where n.nodetype in (1610000069,1610007267);

  
  

  -Above works OK and MV connect you on table node is created successfully

  =====================================================

  [ 2] Circuit Board

  ======================================================

  CREATE MATERIALIZED VIEW LOG ON Cramer.Circuit WITH SEQUENCE, ROWID ( ) -all columns of table ofcircut parentheses

  INCLUDING THE NEW VALUES;

  -More top works OK and MV connect you on table circuit is created successfully

  ======================================================
  

  
  

  
  

  [3] trying to create MV xyz
  

  ======================================================

  CREATE MATERIALIZED VIEW LOG ON cramer.abc_MV WITH SEQUENCE, ROWID ( ) -all columns of abc_MV brackets

  INCLUDING THE NEW VALUES;

  -Above works OK and log on ABC MV MV gets created successfully

  -Problematic step below

  Xyz_MV CREATE MATERIALIZED VIEW

  IMMEDIATE CONSTRUCTION

  REFRESH QUICKLY YOU COMMIT using constraints of trust

  AS

  SELECT c., c.rowid circuit_rowid, n.rowid tr_rowid

  the circuit c, abc_mv n

  where circuit2startnode = n.nodeid

  and c.rpplanId = n.rpplanId;
  ==========================================================

  Clues on how to solve this problem and make quickly updatable ON Commit MV xyz

  Thanks in advance.

  Chanchal,

  If you can read my original post carefully you may have noticed that all these restrictions will not apply in my case.

  All,

  In any case I found the solution to my problem.

  There are a few additional restrictions for materialized views multilayer

  Additional Restrictions for master materialized views

  The following types of materialized views may not be masters of editable materialized views:

  • ROWIDmaterialized views
  • Complex materialized views
  • Read-only materialized views

  I've updated the underlying MV abc below and everything worked like a charm

  CREATE MATERIALIZED view abc_MV

  Immediate CONSTRUCTION

  REFRESH QUICKLY YOU COMMIT using constraints of trust

  IN SELECT

  n.*, n.rowid noderowid, nt.rowid nodetyperowid

  the node n, nodetype_m nt

  where n.node2nodetype = nt.nodetypeid

  and nt.nodetypeid in (1610000069,1610007267);

  Note: To ADD a join without which I was getting error below (although had primary key on the table of the node)

  SQL error: ORA-23415: materialized view log for "NODE" does not save the primary key

  23415 00000 - "view the log for materialized \"%s\".\"%s\"does not save the primary key.

  * Cause: A primary key materialized view is refreshed quickly, but the

  The materialized view log does not record the primary key information.

  * Action: Use CREATING MATERIALIZED VIEW LOG... Command to add a PRIMARY KEY to

  start recording of the primary key information in the materialized view

  Newspaper.

• "Unable to install the plugin from RoboHelp for FrameMaker...." »

  Hi-

  I have 9 Frame and a copy of RoboHelp 8.0.0.203 demonstration and works in Windows 7 (all of a sudden. Yet to learn my way in the operating system after a catastrophic failure of the weekend with my trusty little machine XP.) I have no TCS2; just these two stand-alone tools. I have a book of frame I need to turn into contextual HLO and am auditioning Robo for the task.

  No dice. Whenever I try to import (see below re linking) I get an error message in a box marked "RHUtils": "unable to install the plugin from RoboHelp for FrameMaker. If please close FrameMaker and try again. »

  
  With your permission, I'll cover a few points in the order in which they come to mind:

  == > Initially I tried linking, hoping of course to the advantages of the single-sourcing. I learned in this forum and elsewhere (-btw, thanks for this great resource) I need the TCS2 in good faith in place to connect. Thought that I could import for now instead of it, just to see how it happened; received the same error message.

  == > It was AFTER I had done the research and on the Adobe site (http://www.adobe.com/support/robohelp/misc.html) found this: "the plug-in for RoboHelp, FrameMaker FrameMaker users allows quickly convert any number of books for a simple import or FrameMaker files in RoboHelp 2002 and X 3.» RoboHelp X 4 includes the plug-in! For RoboHelp, FrameMaker plug-in is only available for Windows. To install the plug-in, unzip the RoboMIF.dll into the Plugins folder in the installation of FrameMaker folder (normally found in C:\Program Files\Adobe\FrameMaker7.0\fminit\Plugins)...   Once the plug-in has been installed, restart FrameMaker. FrameMaker now includes a RoboHelp menu. "OK: I have downloaded RoboMIF.dll, installed according to the instructions, rebooted just in case, and now"Adobe RoboHelp"actually appears in the menu bar in the frame. I however always the error message whenever I try to import (now).

  
  == > For several of these attempts Frame was indeed closed. For several other Frame opened to the entry page and nothing else. No apparent effect, anyway.

  
  == > Import and link Word files seems to work very well - which is cool, but my document is in frame at the moment. I know I can convert, but up to now to convert the word seems to need to get all references, what I did in the framework. Doable but not my first choice.

  
  == > I found a thread of editors at http://www.mail-archive.com/[email protected]/msg18576.html / / www.mail-archive.com/[email protected] msg18576.html relating to this problem. The recommendation, (published here for brevity), who was the author:

  1. locate [the] Maker.ini file and ideally make a backup of it, just in case.
  2. in the [APIClients] section of the maker.ini file, add the following line:

  RH4FMver9 = Standard, RH4FMver9, C:\Program Files\Adobe\Adobe Technical Communication Suite 2\Adobe RoboHelp 8\RoboHTML\RHFrameMakerServer9.dll,all

  3. you should now be able to launch RoboHelp and 'link' files, FrameMaker, FrameMaker application should launch correctly.

  This doesn't seem to be my answer because I don't yet own TCS2. This path does not exist.

  (I still get excellent advice of training provided by this answering machine, RJ Raquez, to http://blogs.adobe.com/rjacquez/2009/05/linking_framemaker_9_books_in.html.)

  In any case, this is where I realized that I was, at least for now, of ideas. Does anyone have more?

  Thank you-

  Anne

  If you do not want to go down the road of miftogo mentions Arnis, you can always download the demo of TCS2 - it is fully functional for the period of the demo. I am tempted to install it in its own virtual machine (or another machine entirely) so that you do not get the demo interfere with your legitimate copy of FM9.

• How can I increase the frames of number for all images (screen time).

  I have a slideshow in adobe elements 13 with 650 photos first.  After addinig "in/out fad" photos are not on screen long enough.  How can I increase the frames of number for all images (screen time).  There are currently over 90, and I turn to 150 executives.

  ludhianvi

  What version of Premiere Elements you are using and on what computer operating system is running?

  From your description of a term still image, you seem to be looking at the setting still Image default duration in Edit Menu/preferences/general.

  This parameter is used so that all the still images imported AFTER the game is done will be important in this project with whatever the setting. The unit for the adjustment is images. The default is 150 images (the equivalent of 5 seconds in a 30 frames per second). What you are telling us that the setting is currently 90 images (3 seconds) and you want to return to 150 senior (5 seconds). Once again, callback, which is for all images imported into the project ONCE defined.

  To avoid resetting it and re - import still images, you can adjust the length of image yet at the level of the timeline. This that you do, it will not change the Edit Menu/Settings/general still Image default duration = 90 images project which emerged these preferences settings.

  At the level of the timeline, select all images whose duration is from 3 to 5 seconds. Right-click anywhere in the selection, select Time Stretch.

  Duration of the Time Stretch 00 change dialog box. 00; 03; 00 00; 00; 05; 00 (hours, minutes, seconds; images).

  According to the position of the circumstances or a parent of the always involved, select it all is possible

  a. edit Menu/select all

  or

  b. using the mouse to draw a rectangle autour clips concerned to select

  or

  c. press and hold the SHIFT key on the main keyboard to the computer and clicking on each of the items.

  Please review and consider. If any questions or need any clarification, do not hesitate to ask.

  Thank you.

  RTA

• How to set the root for MovieClip?

  Hello

  The code below works fine when I place my button on the main time line... When I place my button inside a MovieClip, it will never work and never fix the circle library? can tell me please what what should I change, when my button is inside a MovieClip.

  Loading image is fine, but my loading circle is not visible...

  Thank you...

  btn_About.addEventListener(MouseEvent.CLICK, Loading_AboutImage);
  
  function Loading_AboutImage(event:MouseEvent):void
  {
       import gs.*;
       
       var holder:MovieClip = new MovieClip();
       var circles:Array = new Array();
       for (var i:uint=0; i < 5; i++)
       {
  
            var circle:PreloaderCircle = new PreloaderCircle();
            circle.x = i * 20;
            circle.tweened = false;
            circles.push(circle);
            holder.addChild(circle);
       }
       addChild(holder);
  
       var holderWidth:Number = holder.width;
       var holderHeight:Number = holder.height;
       holder.x = stage.stageWidth / 2 - holderWidth / 2;
       holder.y = stage.stageHeight / 2 - holderHeight / 2;
  
       var loader = new Loader();
  
       loader.load(new URLRequest("bgs/bg2.jpg"));
  
       loader.contentLoaderInfo.addEventListener(ProgressEvent.PROGRESS, progressHandler);
  
       function progressHandler(e:ProgressEvent):void
       {
            var loadedPercentage:Number = (e.bytesLoaded / e.bytesTotal) * 100;
  
            if (loadedPercentage > 20 && ! circles[0].tweened)
            {
                 TweenLite.to(circles[0], 1, {tint:0xff8800, glowFilter:{color:0xff8800, alpha:1, blurX:10, blurY:10}});
            }
  
            if (loadedPercentage > 40 && ! circles[1].tweened)
            {
                 TweenLite.to(circles[1], 1, {tint:0xff8800, glowFilter:{color:0xff8800, alpha:1, blurX:10, blurY:10}});
            }
  
            if (loadedPercentage > 60 && ! circles[2].tweened)
            {
                 TweenLite.to(circles[2], 1, {tint:0xff8800, glowFilter:{color:0xff8800, alpha:1, blurX:10, blurY:10}});
            }
  
            if (loadedPercentage > 80 && ! circles[3].tweened)
            {
                 TweenLite.to(circles[3], 1, {tint:0xff8800, glowFilter:{color:0xff8800, alpha:1, blurX:10, blurY:10}});
            }
  
            if (loadedPercentage == 100 && ! circles[4].tweened)
            {
                 TweenLite.to(circles[4], 1, {tint:0xff8800, glowFilter:{color:0xff8800, alpha:1, blurX:10, blurY:10}, onComplete: circlesTweened});
            }
       }
       function circlesTweened():void
       {
            for (var i = 0; i < circles.length; i++)
            {
                 TweenLite.to(circles[i], 0.5, {delay: i * 0.1, x: -200, alpha: 0, onComplete: circleLeft, onCompleteParams: [circles[i]]});
            }
       }
  
       function circleLeft(circle:PreloaderCircle):void
       {
            holder.removeChild(circle);
            if (circle == circles[4])
            {
                 removeChild(holder);
  
                 var bm:Bitmap = (Bitmap)(loader.content);
                 Object(root).pic.addChild(bm);
                 TweenLite.from(Object(root).pic, 1, {alpha: 0});
            }
       }
  }
  

  You can access the root using MovieClip (root).

• Unable to set the Alias for the current directory (ACD)

  I am creating an alias of CDA who is also required to define the command ' * DBGOUTFILE *'
  "file" argument
  
  I am running following commands
  
  -& gt; DBGOUTFILE "abc.txt".
  ERROR: The current directory (ORA-36780) Alias is not defined. Cannot complete abc.txt.
  I went ahead and tried to set the ADC using the command
  
  -& gt; CDA ' / slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'
  ERROR: Slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace (ORA-36784) is a directory name or filename not valid.
  
  In which *'/slot/ems2656/oracle/db/tech_st/11.1.0/admin/pz1ms206_rws60126rems/diag/rdbms/pz1ms206/pz1ms206/trace'* track of directory
  
  No idea how to define CDA (which should be the given alias?)
  
  Thanks in advance for the help
  
  Thank you
  
  Joseph George
  
  
  
  

  Hi Joseph,.

  You must first create a directory.
  SQL > create directory

  as '';
  SQL > grant all the Directory public /;

  Now, you must run the command ADB but make sure that the patch has permission 777 for all folders.

  Thank you
  Brijesh

• Create PRN files for use with the software E-Tran. Unable to set the port to a local printer in Windows 7 with WordPerfect.

  As a reporter, I provide digital transcripts safely to my clients.  I have a Kodak printer and all drivers are up to date.  I use WordPerfect 12 for my transcripts.  E - Tran is the software used to process the transcripts.  It requires one. PRN file.  I save my document as a .wpd file.  I click, file, print, and I check the box print to file provided.   This creates the .prn format.

  I then download this file... or I tried all day to do it, in the software E-Tran.   It will NOT work.  The file is empty.  Nothing is there.  I tried to create a local no port in windows for printing of file installation... no good.  Error messages tell me: function page failed.  ???  Help!

  Hello

  I suggest you to convert wpd (WordPerfect) format .prn file before trying to download it.

  If the problem is not resolved, I suggest you to contact WordPerfect or the manufacturer of the software e-Tran for assistance.

  http://www.Corel.com/Corel/pages/index.jsp?PgId=800085

• Unable to set the Admin password

  I am running Win 7 Home premium x 64, and both accounts were set up. A named Jamie had administrator privileges, the other named Guest had few privileges and a regular user account. I need to swop the privileges. Jamie is now the regular and guest user account has administrator privileges.

  I can set and change a password for the user account of Jamie, but it is NOT YET "ONE OPTION" change the password for the guest account (admin). I read that I could try to create a new account with administrator privileges and then uncomment or set a password on Saint Martin of into the new account. But I am unable to create a new account, as I can not enter a valid user name. I get the message, I can't use! "£$ %^&*()_+{} characters, but I'm only in alpha numeric characters. Even a letter throws the error message.

  I read that a solution would be to enter the following in a terminal back
  NET USER GUEST / PASSWORDCHG:YES
  I also tried
  NET USER GUEST password chg:YES

  but I have the following:
  THE SYNTAX OF THIS COMMAND IS

  NET USER
  [Username [password | *] [options]] [/ DOMAIN]
  Username {password | *} / add [options] [/ domain]
  USERNAME [/ DELETE] [/ DOMAIN]
  Username [/ TIME: {both |}] ALL}]

  What follows
  NET USER GUEST /PASSWORDCHG:YES
  gives me system error 5 has occurred.
  access is denied

  What is the syntax? Am I missing a space or do I need? What is a solution?

  I re-read the answers and realized that he referred to in Vista, Win 7 could not be applicable.

  I would like some suggestions.

  Hi JamesQE

  You must stop using the guest user account as soon as possible. The guest account is designed to be used by a person who wants the owner of the computer to allow the use of the computer temporarily.

  The guest account is disabled by default and should only be enabled for temporary use and then invalid later. Like most other types of user accounts in Windows this account is associated with a unique SID (security identifier) that limit the account to certain areas of the operating system.

  If there is no other administrator account on the system, I would recommend using the backup you mentioned to reinstall Windows 7.

  Let us know if you have any other questions.

  Concerning

• Unable to set the anchor points of the path when the keyframes turned on...

  I have a layer of irregular shape who I am deformation over time (from smallest to largest). I am able to set the anchor points of the path to the forms I want, but once I put two keyframes for the path I'm interpolating a slide, I'm more able to set the anchor points for minor changes, for example, I am unable to draw the Bézier handles. If I disable keyframes, then I am allowed to adjust the anchor again, but that means I have to start whenever I need to make an adjustment. I have run successfully the concept but need to change several layers of form in this way, and not having is not access to the Bézier handles point of anchorage slows productivity.

  Any ideas?

  Thanks in advance,

  Chris

  12.2.1.5 AE

  Mac 10.9.4

  Sorry, I missed the rather obscure reference to an expression in the first post you. Had, I had to pay more attention I'd say disable the expression to change the path, and then select. Not being able to select a top with the marks of perfectly logical on expression because it is turned on with the full path is selected by the expression of all time. This is how work expressions. This seems to be a lot of trouble to go just to change the "timing" of a couple of keyframes.