Unable to telnet BB10 dev alpha Simulator
I'm not able to telnet Simulator running after a command...
Telnet
It gives me error: could not open connection to the host, on port 23: Connect failed For this reason, I can't deploy my application on the Simulator. Thank you. In fact, the problem was different. Network card in the computer virtual has been disabled. Therefore, IDE was not able to find out. Permit to it and its working now. Dumb question Tags: BlackBerry Developers BB10 Dev Alpha Simulator Dev Mode doesn't work Hello! I have a problem with BlackBerry 10 Dev Alpha Simulator. When I go into the VM for the 10 Dev Alpha settings BlackBerry Simulator and enable development mode, the icon of the Mode of development will not displayed it. I can't see the IP address of Simulator and install my application. Screenshot: U can not find the icon of the mode of development in the Simulator. What you have to do, it is after switching to the mode of development for sure, go into settings,-> select network from the drop-down list-> note in ipv4 ip address... And it's ip address, you use the mode of development. Unable to connect to BlackBerry 10 Dev Alpha Simulator Dear, I can't connect to my BlackBerry 10 Dev Alpha Simulator. It worked yesterday, but suddenly today I can't connect, I check my cpu and found that virtualization enabled and active development. Can someone help me why I can't connet to the Simulator? Help, please I found the error My VMware network card has been disabled. BB 10 Dev Alpha Simulator 10.1 beta - screen resolution I couldn't get my Android app BAR file to install on the current version of the BB 10 Dev Alpha Simulator (10.0.10.261) so I tried to install the Beta 10.1 Simulator and my app installed first and short big. The only problem is the screen seems to be much smaller than the 10.0.10.261 version, I read in the release notes that the resolution is only 720 x 720. Is it possible to change this? Or can we expect a resolution screen than the final version? Thank you Jonathan I realize now it's the resolution for the upcoming phones of the physical keyboard BB10 (X 10). Feature on BlackBerry 10 Dev Alpha Simulator Greetings, I would like to know what device simulates the "BlackBerry 10 Dev Alpha Simulator"? In my view, that simulates the Q10 of BlackBerry, I would like to know if it is possible to emulate the Z10 BlackBerry, because the size of the screen is different in these two devices, or would like to know how whether the behavior of the GUI of my application, each of these two devices. Best regards! Hello Orientation landscape BB10 Dev Alpha Hey there, I'm looking to have a landscape for playbook and BB10DA (BB10 Dev Alpha) application. The playbook, it will default to the landscape and all is peachy. However when I run the same application on BB10DA the phone is locked to a portrait orientation making the app behave strangely. The keyboard is the portrait and the gestures of the bezel also. I have my rendering and input adjustable thanks to Cocos2d-x, but the OS needs to recognize that I want the phone to be landscape only for this application. Is it possible to do currently? -Xoorath In your file of bar - descriptor.xml, you can add the following inside the element
Which I think should work. Not able to read the BB10 Dev Alpha contacts (door Android app) Hi friends, I wore my Android app that exports the contacts into a CSV file that is stored on the SD card. When I run this app on my device BB10 Dev Alpha B, it creates an empty file. I guess that the BB10 Android runtime does not support the access contacts in BB10. Is someone can shine some light on this issue? Thank you Hemant Hello world I hope I can clarify what is supported in the BlackBerry Runtime for BlackBerry 10 Android applications when it comes to support of Contacts. Currently, support is in place to add an entry in the Contacts list to either contact existing, or by adding a new contact to the list. This can be understood as write-only access. We do not query the list of contacts or save existing contacts. There was some security issues behind the decision to only allow this access level, but as always, we are open to discussion of different use cases. HOWTO debug Webworks on VMWare Dev Alpha Simulator? Hello I'm developing an application Webworks. I can't use training Simulator because it does not implement 'cards' and does not implement the API pim.contacts. I have no device Dev Alpha, so I use the VMWare of the Q10 Simulator. My question is: -can I somehow debug the webworks app? -I can at least see the console.log output somewhere? How? -Is taken in charge for BB10? : http://supportforums.blackberry.com/t5/Web-and-WebWorks-Development/How-to-debug-BlackBerry-web-appl... -can I change my javascript and HTML without repackaging in ripple or command line. I'm changing code, repackaging, hoping for the best. It is not productive, and feels like the glacial period. Thank you Hi escay,. 1. "I can somehow debug the application of webworks. Yes, wrap it with the - d option. Your Simulator will have an IP address in the lower corner. You should be able to connect to the Web Inspector via
2. "I can at least see the output somewhere console.log? «»» How? "Yes, you can see the console Web Inspector . After following the steps above. 3. Yes, you can use web Inspector. Your device must be in debug mode and your application packed with - d. 4. Yes, you can. Direct your config.xml to your local Web server. This will pull the content of the server application and allow you to be updated on the fly. All you have to do is to hit refresh, . Hope this information helps. BB10 dev alpha - stuck in Configuration - does not load the license agreement (r2320) I successfully upgraded Dev Alpha A 10.0.09.2320 with automatic charger. Device, rebooted, installed new drivers, etc etc, all the other things worked well, BUT The device is unable to complete the installation, because it gets stuck on the license agreement page. I am connected to wifi. The wifi works. It's worked before. It won't let me even to select a country, it shows an error that the network does not, repels me a page, and I have to disconnect / reconnect to wifi before it allows me to 'sweep left to continue' again. Any suggestions? I managed to make it work by (sigh) with the help of roaming data connection (after restart). Now it is stuck on the screen of a software update. He has rightly "Software Update" and nothing else on the screen. The Act of working is the Emergency call. Update: after another reboot, after you turn off roaming data once again, it gave me an option to start or turn off the phone, but it says something about "blackberry infrastructure? Does this mean that it will work only with BlackBerry Internet Service in the future? Edit: so bad, yet another restart that he lets me actually left-scan-ignore the update of the screen without anything do. Sorry for the false alarm, I'll leave it here for anyone to find. Hello On my Dev Alpha the Qt BB10 device fonts seem to be in: /base/usr/lib/qt4/libItem but my app is looking for them here: / base/usr/lib/qt4/Fonts How can I make my app look elsewhere? How can I set an environment variable to make this please? Thanks in advance, Yalnte Hello to specify the fonts directory, add the following code to your file bar This corrects the QFontDatabase error at startup. I noticed you also try to use QtQui in your application, if you were not aware Cascades is a better option and has a greater integration with the system from QtQui, so take a look if you haven't done so already. See you soon Swann Question of BB10 Dev Alpha: debugging token is invalid I'm trying to get a token of debugging on my dev alpha device and it just cannot work. I can create, validate, and install the token, but it generates an error: debugging token is not valid. Or not applicable for this device. 10.0.4.197 OS version Build ID: 196525 PIN: 29D939F4 Start: 28 June 21:32:34 UTC 2012 I use BlackBerry 10 WebWorks SDK 1.0.0.15 I just restarted the device. It is currently 21:26 according to my computer clock and the BB10 clock is synchronized with the clock of my computer... it of doesn't look right... the listed start time is 5 minutes in the future. Here's what I did. Info: Debug token created. Issue date: 28 June 2012 02:02:59 CEST Info: Debug checked token. I checked the device PIN above (702102004) is correct. This is the decimal version of my device PIN (29D939F4) I tore the debugging, and here's the manifest token: Archive-manifest-Version: 1.2 The package author: XXXX Debug-token-system-Actions: run, multi_window, multi_instance, run_air_native, run_native I was thrown for a moment of the date (Date of show-package -: 2012-06 - 29 T 00: 02:59Z) until I realized it was just my current time converted to offset - 0. I am currently in Toronto, where it is now UTC - 4. Info: Send request: install Debug Token Yet, the device don't like this token. Here is the result. Any ideas to know what could be the problem here? Thank you Stem Rod, I had the same problem with my alpha chips and debug dev. Setting date/time is the source of the problem. Here is the fix:
My date is June 25 Let me know if this solution worked for you! Worked for me. I'm not able to get the action shot of bezel superior to register on the Dev Alpha for any of my applications. I tried everything I found these tips and on github. I tried the sample project swipemenu.js WebWorks https://github.com/blackberry/WebWorks-Samples/tree/master/swipemenu. I packed up the sample application to the Alpha of Dev, and I can't get the hang of the bezel to work. I can click on the button and trigger javascript code to display the menu, but this isn't really a shot of bezel. I added the BB10 the
function onSwipedown() { blackberry.event.addEventListener("swipedown", onSwipedown); But I never see the alert, now how the shot of the upper bezel of importance. I also place the file javascript WebWorks (webworks - 1.0.2.9.js) in my application. I do not use the BBUI.js for this app because it causes too many conflicts at this time. Y at - it someone who has got the hang of the upper bezel to work in BB10 WebWorks app on a Dev Alpha device. OS version: 10.0.9.338 10 BlackBerry WebWorks SDK 1.0.2.9 you expect the event ready webworks and you enroll. https://developer.BlackBerry.com/HTML5/documentation/creating_a_bb10_app_2007539_11.html dropdowns jQueryMobile freeze all browser/app on BB10 Dev Alpha Hello I tried to transfer my PB to BB10 application and has encountered a problem with dropdown lists jQueryMobile. When I clicked on one of them I could not do anything else in the application (web Inspector remote display any errors in the console). I thought it's something on my app, but the same behavior can be reproduced from browser Dev Alpha to http://jquerymobile.com/demos/1.1.1/docs/forms/forms-all.html - there are 3 drop-down menus down - the two first drop down menus freeze browser, only the last one works. Any ideas? PS. Yes, I want to move to bbUI, but this behavior is disturbing even when Dropdowns JQM work on more recent (10.0.9.388) operating system, so I am happy with the fence wire. Thanks for the support I have been using the alpha dev. for awhile. But all of a sudden it won't turn. I loaded it via computer and a usb charger and the wall outlet. When I connect it there is a red LED that flashes around the permanence. Anyone know the symptom? Is there a way to physically reset the device or pull the battery out and back? This is a real setback for me because I'm currently developing. It helped me: BBM on BB10 Dev alpha B problem Hey guys. I'm pretty new to this Blackberry thing (got my Dev Alpha on a Jam Session, it was great), this is my first Blackberry device (frankly, I don't like Blackberry pre-10) and I tried to integrate my BBM app, but I have not been able to access all the BBM. I tried re-flashing the unit and using a different BBID unsuccessfully, BBM opens with a "Temporary server error" screen, and the only option I get is to exit the application. Friends (who also have been on the Jam session and got their devices) tell me they didn't need anything else that WiFi for that BBM works, so I was really puzzled. If I have in some way did do something wrong?, Blackberry icon is displayed next to the WiFi, is it not enough for BBM work on the Dev Alpha? Thanks in advance. This problem has been resolved. You may need to reset your BlackBerry 10 Dev Alpha if you continue to receive this error. How can I check if the program 'youtube downloader video and audio by Chris 0.3.5 has malicious software.When I go to download it has chain https://addons.Mozilla.org/Firefox/downloads/latest/413644/addon-413644-latest.xpi?src=userprofile I'm so nerv Before I could remove a bookmark from the URL address bar, by clicking on the star, by selecting "Remove bookmark." Recently that this last button - delete - did not appear. Nor can I use the Remove feature processing batch, as the bookmark under the Satellite U200 163: where can I find the RAM slots? Where can I find the RAM slots? XP Pro - unable to detect the hard drive during the upgrade Hello I was trying to add a second IDE hard drive to my PC, after the installation of the system tells me not hard are detected. Press FI to try again. F2 to set up. I did both, but the drive still not detected and the system could not start. I try t I have a cd for windows xp with sp3 but I lost my product key I have a cd for windows xp with sp3 but I lost my product key and there is no keys on my computerSimilar Questions
Recent versions of Simulator offer to choose a type of screen during startup. Square screen (720 x 720) Q10 & Dev Alpha C's rectangular Z10 & Dev Alpha one
blackberry-debugtokenrequest -storepass storepass -devicepin 29D939F4 debugtokens\BB10_Dev_Alpha_debugtoken_29D939F4.bar
blackberry-debugtokenrequest -verify debugtokens\BB10_Dev_Alpha_debugtoken_29D939F4.bar
Expiration date: 28 July 2012 02:02:59 CEST
Features:
702102004
Archive-created-by: BlackBerry BAR package v1.4
Package name: debug.token
Package version: 0.0.0.8
Package-Type: debug-token
Package-author-certificate-Hash: XXXX
Package-author-Id: XXXX
Package-Id: XXXX
Package-Version-Id: XXXX
Package - Issue Date: 2012-06 - 29 T 00: 02:59Z
Debug-token-expiration Date: 2012-07 - 29 T 00: 02:59Z
Debug-token-device-Id: 702102004
blackberry-deploy -installDebugToken "C:\Program Files (x86)\Research In Motion\BlackBerry 10 WebWorks SDK 1.0.0.15\debugtoken.bar" -device 169.254.99.117 -password password
News: Expired session reset
Info: Send request: install Debug Token
Info: Action: install Debugging token
Info: File size: 2273
result::success
alert("Swipe down event occurred.");
}Maybe you are looking for