unauthorized user on my PC / network
When I go to 'network' there is a PC that is not supposed to be there. I am not able to delete and when I try to open it I get the error '0 x 80070035 '.
When I go to 'network' there is a PC that is not supposed to be there. I am not able to delete and when I try to open it I get the error '0 x 80070035 '.
Change your network password and make sure that you use the WPA security.
Tags: Windows
Similar Questions
-
An unauthorized user has joined my network. How do I UNATTACH them?
Home a computer identified unauthorized wireless as NIGERIANIMMIGRANTBEN has become attached to my network.
I have Details of the I p address, mac code, etc.
How can I get rid of him?
Thank you
Have you set up your network security?
http://www.SevenForums.com/tutorials/105015-wireless-security-how-protect-your-network.html
If you have, you can just see someone another wireless network.
How do you know they are on your network?
-
Is there a way to recover deleted history sites? Also, a way to prevent unauthorized users to erase history?
You need administrative rights to do this. Be careful as it is possible to easily create a very difficult to solve waste.
Run gpedit.msc
Reach
-User configuration
-Administrative templates
-Windows components
-Internet Explorer
-Delete browsing history
Disable the feature turned on 'delete browsing history '.
You also probably want to configure
-InPrivate
Disable the active InPrivate browsing
If you use IE8; Otherwise, the user can simply avoid registering in the first place.
Also - the browser menus
Tools menu: Disable Internet Options... menu active
would be a good thing; Anyone who shouldn't be allowed to delete the history of should not be also change too much in the Internet Options.
For some reason, changes to this setting of group policy have no effect in IE6 and IE8 on a workgroup computer XP Pro.
In fact, I would like to disable the entire Tools menu item; However, there don't seem to be any means to do.
Run gpupdate /Wait:0
Any user who cannot access gpedit.msc, editing the registry (regedit.exe, regedt32.exe) or mmc.exe may re-activate it now grayed out in the menu items.
Note: mmc.exe can be activated by right clicking my computer even as a limited user. Remove or deny permissions to these files for administrator users.
I would like to configure them on a per user or user group basis. Does anyone know of a way to do by not part of a domain?
I know no direct way to recover deleted history sites. Perhaps, they enter the trash somewhere. They may be captured by the network of monitoring programs, even if they have been deleted from the personal computer.
-
What is the use of having a password if an unauthorized user may cancel its requirement?
I don't understand why there is a cancellation of the requirement of password button. If an unauthorized user to access my account by internet or this pc, what he has to do is click the button 'Cancel' on the pop-up password (password is required to access my mail) and there is full access.
It's the same thing with the password. The field will allow even one to get into a new, which makes no sense.
Email passwords and their actions are administered by the e-mail providers. Participation only Thunderbirds is to store the password, if you have selected this option and give it on the server being queried.
The master password is to protect access to your passwords registered and not to your mail.
http://KB.mozillazine.org/Master_passwordIf someone gets access to your account via the Internet web mail interface, Thunderbird has nothing to do with it.
-
I have several users on xp sp3 with ie8 using a single connection, which is non-negotiable. I have to often go into users and manage my network passwords to delete the stored credentials. y at - it a way to stop the possibility of using save it my password box? It is on an intranet and internet content settings explore have no effect.
Hello fyrman24RRW,
Thanks for the return of the response. Here is a link that I hope will help. If this is how you handle this please let us know. Please let us know status.
http://support.Microsoft.com/kb/306541
Thank you
-
Unique firefox profile all users and profiles on networks
I am trying to configure Firefox like standard browser for an entire building, and this framework is to ensure that all firefox profiles are registered readers personal network rather than local machines. I can use the Profile Manager to do this on a user base, but what happens if I want that all users of any machine, using the same firefox profile that points to a specific network drive? (This will ensure users always have their browser settings and no matter where they go, allow us to move outside machines without losing all the browser settings, etc..) The contents of this drive is specific to the user account, but still have the same way.)
As far as I know, the profiles created in the Profile Manager are specific to each user (domain), which would mean a lot of creating manual profile. Is it possible to ensure that Firefox always uses a specific profile of Firefox or the path? Is it possible to have the control of firefox profiles exist (in a .bat file, for example), so I can create the appropriate injector if necessary? Can I use a command line to set the profile to be used by default, or that can be done from the GUI Profile Manager?
Finally and this can justify a separate query, but I found that when you use profiles that link to a network drive, trying to open firefox on multiple computers will fail (another instance of firefox is open, close it or restart). I can tell Firefox to force the old instance closed, or I have to firefox.exe - no-remote 'differentProfile' Pei each time?
We are on Windows 7, moreover, for the sake of references.
Sort of. I don't always have a perfect method to check the presence of a profile, but as a solution, I'm looking in the drive location of my custom profile for prefs.js Server (IF EXISTS 'path\path\Firefox\prefs.js' (thing do)), and that will at least tell me if I have created something here or not.
-
How can I allow a standard user to add wifi networks
I have a standard user with a MacBook Pro running Mac OS El Capitan. She must be able to connect to Wi - Fi networks when you are away from the office, but I don't want to give him an admin account. Currently, the MacBook Pro requires admin approval every time
How can I set this up so she can add wireless accounts while a standard user.
Thank youI don't think it's possible. You will need to give its administrator privileges, even temporarily, or go with it at each location and add them to it.
-
How to prevent users from changing the network connection?
Hi all
I have a weird problem. I set up my HP ThinPro T610, I have to say is simple enough. I want users just to turn on the computer, wait a few minutes and log into the Terminal Server Services on the Server RDP connection, so I basically blocked every user of things could possibly click - they have no taskbar, etc. Connection Manager.
Now, there's one thing I can't block - 10 seconds, users can see "Network connection" pop up, in which they can - at my enormous disbelief -change the connection settings.
I can't find a way to block this... everyone can share their experience with this issue?
Hello
Hope you use thinpro 5 OS
Could you please try these step
1 log in administrator mode
2 Goto advanced - Xterminal regeditor and type
3. go in config wizard
4. change the value to enablenetworkcheck and save and reboot
====================================================
Although I am an employee of HP, I speak for myself and not for HP. ===
* Click on the star of CONGRATULATIONS on the left say "thank you." -
The directory of the user on the mapped network drive
I want to move my user directory
C:\Users\Edwin
to a mapped network drive E: (i.e. mapped from a network share\\\\192.168.22.9\share
).The difficult part is to move the directory of the user himself. I found 2 possible solutions, which are not applicable for me due to my use of a network drive.
Move
C:\Users\Edwin" to "E:\Users\Edwin
, and then use a symbolic link of junction (mklink -J
) to post a link toC:\Users\Edwin
.This does not work for me because I can't create a symbolic link to a directory on a non-local drive junction.
Changing the value of registry key
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\ProfilesDirectory
of%SystemDrive%\Users
toE:\Users
before you create the user "Edwin".Later, when the "Edwin" user first connects, the profile will be in
E:\Users\Edwin
.
The problem is that I met a problem of the egg and the hen.
When you first login as a user 'Edwin' profile will be created in
E:
. However, at the moment I first login, the mapped network driveE:
is not there.I tried without success to the following:
Create a drive mapped persistent administrator. Did not work. The mapped drive is only visible to the administrator user.
Create a mapped drive persistent using the rights system (using
PsExec -s
). Did not work. The mapped drive is not 'owned' by anyone, not even the current administrator user.Create a drive mapped persistent by using the user newly created by Edwin, without opening a session as Edwin again (using the
PsExec
once again). Did not work. It is possible to create a mapped drive under a different name, once I tried to do it with persistence (/persistent:yes
), I get aAccess is Denied
error.
No idea how this can be done? Or is it it even can be done at all?
Hello
What version of Windows are you using?
Related topics:
Try to repost the question to the TechNet Networking Forum
-
When I want to connect to another computer with win Server 2003 computer that I invited with a confirmation of the administrator. the name of the Server 2003 computer is ofoghserver. When I enter username: ofoghserver\administrator and password this occure failuer Login error: a network unkwon or user password... but I can connect to the server with remote desktop and I can connect to another computer with windows 7. all computers in this good work, but this computer can not enter windows server.
Did you create the corresponding user account and the password on the server? If this isn't the case, you should do this. MS - MVP - Elephant Boy computers - don't panic!
-
Change the IP address in the user profile of the Network Configuration?
I added some users on the network configuration in order to change the ip address when they are in the other site, but in Windows 7 it is inviting to enter the user name and password, if a single user, enter the name password it will allow them to change the ip address how to change so that the user is able to change your ip without asking for a password and username? How can I solve it... Thanks in advance.
Nerdcat
Address you internal IP is defined by the router or the ISP based on your configuration. If you try to change the internal IP address using "static IP" you shouldn't have to enter a user name and password so that it is in configuration and fixed like that.
You cannot change the external IP provided by your ISP it however.
-
AnyConnect users can access internal network
Hello!
Just sat up a new Anyconnect VPN solution for a customer. It works almost perfect.
Anyconnect users can reach the internal network storage. The anyconnect users can access the internet, but nothing on the network internal.
(Deleted all the passwords and public IP addresses)
ASA 4,0000 Version 1
!
ciscoasa hostname
names of
!
interface Ethernet0/0
switchport access vlan 2
!
interface Ethernet0/1
!
interface Ethernet0/2
!
interface Ethernet0/3
!
interface Ethernet0/4
!
interface Ethernet0/5
!
interface Ethernet0/6
!
interface Ethernet0/7
!
interface Vlan1
nameif inside
security-level 100
IP 192.168.9.1 255.255.255.0
!
interface Vlan2
nameif outside
security-level 0
IP address
!
passive FTP mode
DNS domain-lookup outside
DNS server-group DefaultDNS
Server name 213.80.98.2
Server name 213.80.101.3
network obj_any object
subnet 0.0.0.0 0.0.0.0
access-list SHEEP extended ip 192.168.9.0 allow 255.255.255.0 192.168.9.0 255.255.255.0
AnyConnect_Client_Local_Print deny ip extended access list a whole
AnyConnect_Client_Local_Print list extended access permit tcp any any eq lpd
Note AnyConnect_Client_Local_Print of access list IPP: Internet Printing Protocol
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 631
print the access-list AnyConnect_Client_Local_Print Note Windows port
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 9100
access-list AnyConnect_Client_Local_Print mDNS Note: multicast DNS protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.251 eq 5353
AnyConnect_Client_Local_Print of access list LLMNR Note: link Local Multicast Name Resolution protocol
AnyConnect_Client_Local_Print list extended access permit udp any host 224.0.0.252 eq 5355
Note access list TCP/NetBIOS protocol AnyConnect_Client_Local_Print
AnyConnect_Client_Local_Print list extended access permit tcp any any eq 137
AnyConnect_Client_Local_Print list extended access udp allowed any any eq netbios-ns
pager lines 24
Enable logging
logging of debug asdm
Within 1500 MTU
Outside 1500 MTU
mask 192.168.9.50 - 192.168.9.80 255.255.255.0 IP local pool SSLClientPool
ICMP unreachable rate-limit 1 burst-size 1
don't allow no asdm history
ARP timeout 14400
NAT (inside, outside) source Dynamics one interface
!
network obj_any object
NAT dynamic interface (indoor, outdoor)
Route outside 0.0.0.0 0.0.0.0 1
Timeout xlate 03:00
Pat-xlate timeout 0:00:30
Timeout conn 01:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
Sunrpc timeout 0:10:00 h323 0:05:00 h225 mgcp from 01:00 0:05:00 mgcp-pat 0:05:00
Sip timeout 0:30:00 sip_media 0:02:00 prompt Protocol sip-0: 03:00 sip - disconnect 0:02:00
Timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
Floating conn timeout 0:00:00
dynamic-access-policy-registration DfltAccessPolicy
identity of the user by default-domain LOCAL
AAA authentication enable LOCAL console
AAA authentication http LOCAL console
LOCAL AAA authentication serial console
the ssh LOCAL console AAA authentication
AAA authentication LOCAL telnet console
Enable http server
http 192.168.9.0 255.255.255.0 inside
http 0.0.0.0 0.0.0.0 inside
http 0.0.0.0 0.0.0.0 outdoors
No snmp server location
No snmp Server contact
Server enable SNMP traps snmp authentication linkup, linkdown warmstart of cold start
Telnet timeout 5
SSH timeout 5
SSH group dh-Group1-sha1 key exchange
Console timeout 0
dhcpd outside auto_config
!
dhcpd address 192.168.9.2 - 192.168.9.33 inside
dhcpd ip interface 192.168.9.1 option 3 inside
!
a basic threat threat detection
Statistics-list of access threat detection
no statistical threat detection tcp-interception
WebVPN
allow outside
AnyConnect image disk0:/anyconnect-win-2.5.3046-k9.pkg 1
AnyConnect enable
tunnel-group-list activate
internal SSLClitentPolicy group strategy
internal SSLClientPolicy group strategy
attributes of Group Policy SSLClientPolicy
value of server DNS 192.168.9.5
client ssl-VPN-tunnel-Protocol
the address value SSLClientPool pools
attributes of Group Policy DfltGrpPolicy
VPN-tunnel-Protocol ikev1, ikev2 ssl clientless ssl ipsec l2tp client
VPN Tunnel-group type remote access
type tunnel-group SSLClientProfile remote access
attributes global-tunnel-group SSLClientProfile
Group Policy - by default-SSLClientPolicy
tunnel-group SSLClientProfile webvpn-attributes
enable SSLVPNClient group-alias
!
class-map inspection_default
match default-inspection-traffic
!
!
type of policy-card inspect dns preset_dns_map
parameters
maximum message length automatic of customer
message-length maximum 512
Policy-map global_policy
class inspection_default
inspect the preset_dns_map dns
inspect the ftp
inspect h323 h225
inspect the h323 ras
inspect the rsh
inspect the rtsp
inspect esmtp
inspect sqlnet
inspect the skinny
inspect sunrpc
inspect xdmcp
inspect the sip
inspect the netbios
inspect the tftp
Review the ip options
!
global service-policy global_policy
context of prompt hostname
no remote anonymous reporting call
Cryptochecksum:6a58e90dc61dfbf7ba15e059e5931609
: end
Looks like you got the permit vpn sysopt disable to enable:
Sysopt connection permit VPN
Also remove the dynamic NAT depending on whether you have already configured under the NAT object:
No source (indoor, outdoor) nat Dynamics one interface
Then 'clear xlate' once again and let us know if it works now.
-
Is there a way to create a plan of action in vCAC and allow a user to select a network?
Hello
We have 30 different VLAN used for various tasks within our Organization. I was wondering if there is a way to create a unique model vCAC and alow the user to choose which virtual machine network join to (at the time)?
It's not like I can use a vCenter customization specification and just set up 'network-> Custom Settings-> interrogate the user'
Or I have to create 30 Blue each connected to a different network?
vCAC Build 6.0 - 1720522
Thank you
Tom
This will show you how do
You use custom properties to achieve this. You won't need 30 blue, build a logic and apply it on a plan of action.
-
Disable the ability of users to eject the network connection
Recently, I noticed that my users are able to eject the virtual machine network connection, they are connected to. Looks like it is a feature of VMWare Tools, as I have on my VMWare Fusion VM the same capacity as in my view deskltops. When you click on the media eject icon, you get a menu as shown below:
I wish I could show only the removable disc this menu, but especially the network connection. Does anyone know how to do this? I have not found anything about this when you search here or on the internet generally. It may be that I do not use the correct terminology to search for, because I can't imagine that anyone met this as a problem before.
Thanks for any help you can provide
This can be disabled...
-
Filevault2 allows an unauthorized user to log
My Macbook Air (early 2015) has active Filevault. I am the only user of this machine. At the time, I put in place the FV, I nominated several users who have been authorized to unlock. and note the FV recovery key.
At the time, one of the users has been Admin; I later changed it to a Standard account. It was my main ACCT to work. After the ACTC has started having probs (though not immeddiately after the account type change) which seems to be specific in itself, I created a second account. Call them Smith and Smith2, respectively.
I did Smith2 and a Standard acct also gave it the same password: Smith. Smith2 has not added to the users allowed to unlockk the Mac because I don't know how to do this pr wheter this can be done at all. My plan was to transfer Smith to Smith2. I had not thought about Filevault until today.
I just realized that Smith2, a user not allowed to unlock the Mac, can simply connect as if encryption has not been enabled. I was wondering if it might be because the password was allowed to FV, I changed the password of Smith2. Made no difference.
Under the Security tab of the SysPrefs, he says that Filevault is turned on. Today, working in recovery mode (in utility disk on an external drive, when I was ready to restart, I selected the MacHD and that it was necessary to enter a password to unlock it, before it will re-start in MacHD.) If parts of the operating system behaves as if encryption is enabled.
But for Smith2 to just breeze in full means the encryption does not work!
I can, of course, try disabling encryption and then turn it back on again. But it's really annoying. Thought I'd post here for your thoughts - maybe there is a bigger problem that needs to be addressed?
MacBook Air (early 2015), Yosemite 10.10.5 kept up to date.
I would like to get this straight: Smith2 may not unlock FV, but can login and access Mac directly after a reboot (without all the other accounts connected)?
Maybe you are looking for
-
Qosmio G20: sound seems to come from a broken fan - how to replace the fan
His terrible seams to come with a broken fan. as the warranty is over and the fan is cheap I change it by myself.Already built a desktop open but never a laptop. Could you please help me find how to open it
-
P70 airplane mode turns off of the AC adapter / CC
When I put my P70 in air mode through Windows 10, it does not accept the power of the power adapter and trickles of battery. Is this normal? I see nothing in Windows Help or forums to indicate that it is a normal activity. As soon as I get out of air
-
My 5s iPhone keeps turning it off yourself.
IiPhone keeps turning it off yourself. Even when battery is fully charged. I do a reset to turn it back on. Seems to be more one morning when it arrives
-
Y at - it a standard patch that I can download so I can run old software.
Y at - it a standard patch that I can download so I can run the old software. The software worked fine on Windows 7 until I upgraded to Windows 10. Disliked Windows 10 but when I tried to go back to Windows 7, had so many problems with the operating
-
Problem with display as the brightness function does not work
Cleaned keyboard & screen. Now the screen is not as bright. Tried the buttons Sun but no difference.