Update ESXi with VCenter VM on the host?

Similar Questions

• No VRM server registered with vCenter Server for the site 'Live '.

  I have SRM 6.1 and vSphere replication 6.1 installed on both sites.

  The ECP is connected to the vCenter server.

  I get this error message: failed to create the protection group. No VRM server registered with vCenter Server for the site 'Live '.

  Screenshot attached, no one knows what is happening here?

  

  However, there was a mismatch in the meantime server on all except VRA in the remote site, it is now resolved and the issue disappeared.

  Strange, how the error related to the site online, however.

  Thank you for pointing me in the right direction.

• hosts mixed esx 3.5 and older new vsphere with vcenter 4.1 esx hosts. Need advice please.

  Hello, I have an existing the vcenter server install managing two esx 3.5 hosts. The vcenter is version 2.5.0.x. I want to manage my new hosts of vsphere 4.1 esxi through the vcenter. I would check that if I improve my vcenter 2.5.0 for the last version vcenter Server required for the 4.1 that I will be able to manage my old esx 3.5 hosts? Will be an upgrade inplace vcenter 2.5.0.x support now the license server in place or I will have to manually install this after? Thanks for any info. Doug Dorbuck

  You can mange ESX 3.x host with vCenter 4.x - you can't manage ESX 4.x, vCenter 2.x hosts

  I think that in a place of upgrade will keep the license server - otherwise you will need to reinstall the server-licensing

• Shrink a Linux VM to esxi with Vcenter Converter 4

  Hello

  I spend some time to try to reduce my VM but without real success so far.

  I tried to use vCenter Converter 4.0 to do, but to to esxi esxi, it doesn't show the option in the drop-down list.

  So I tried to export it to Vmware Workstation, and between a 71 GB VM, I had a VM 21 GB, which is much better! However, esxi cannot use format Worstation, and when I try to convert again, I find myself with the initial size of my VM...

  Anyone know how I can shrink my VM in a way that I can still use them on esxi?

  Thank you very much.

  You can use Linux P2V Converter Standalone4.0 to this (share).  You treat just the source of the virtual machine as a physical machine.  Then, you select a smaller size for the individual volumes in the 3rd page of the wizard.

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• ESXi with VMI active on the computer, virtual and active in the kernel Linux = 10 x slower

  I have a performance problem with VMI enabled on Linux systems and of ESXi, does anyone have any advice for me?

  I have four boxes of ESXi.  One on one processor 1.26 Ghz, with double Hyperthreaded 2.26 Ghz (4 logic), one with dual Hyperthreaded 1.4 Ghz (4 logic) and the other on a single 3.0 Ghz hyperthreading.

  I don't think that any of them have hardware virtualization instructions Intel VI.  I use ESXi 3.5 U3 as host and Gentoo 2.6.26 as the client OS.

  I tried activating VMI on every machine and every time I do, the virtual machine performance is reduced by a factor of 4 to 10 times.  For example:

  Portage: game Dec 18 08:13:29 2008: 43 seconds

  Portage: Fri Dec 19 02:58:21 2008: 167 seconds

  Portage: Fri Dec 19 03:01:57 2008: 193 seconds

  Portage: Sat Dec 20 23:40:14 2008: 54 seconds

  Here are 4 emerges on Gentoo.  One with tickless and VMI disabled (43 seconds), one with active Tickless and VMI in ESXi and Gentoo paravirtual active VMI, one with HZ = 100 and active VMI and the last with tickless and VMI disabled (54 seconds).

  What I find online suggest VMI (when enabled in the kernel and in the .vmx file) should increase the speed or to all the least to stay the same.  I worked on it for a week and google to death on it.  I have consulted with other people running ESXi and they can reproduce the same problem when using Gentoo.  I have not tried Ubuntu Fiesty Fawn or any other OS, but I don't think that would matter much.

  If anyone is curious about the gentoo configs, a world file:

  App-admin/newsyslog

  App-admin/sysklogd

  App-editors/nvi

  App-emulation/open-vm-tools

  App-portage/gentoolkit

  App-portage/portage-utils

  App-shells/tcsh

  dev-util/strace

  NET-Analyzer/tcpdump

  NET-dns/bind

  NET-misc/bsdwhois

  NET-misc/ntpclient

  NET-misc/telnet-bsd

  sys-apps/pciutils

  sys-apps/slocate

  sys-boot/grub

  sys-fs/jfsutils

  sys-kernel/gentoo-sources

  sys-process/lsof

  sys-process/vixie-cron

  www-client/w3m

  Here is the configuration of the kernel:

  CONFIG_X86_32 = y

  CONFIG_X86 = y

  CONFIG_ARCH_DEFCONFIG = "arch / x 86/configs/i386_defconfig.

  CONFIG_GENERIC_TIME = y

  CONFIG_GENERIC_CMOS_UPDATE = y

  CONFIG_CLOCKSOURCE_WATCHDOG = y

  CONFIG_GENERIC_CLOCKEVENTS = y

  CONFIG_GENERIC_CLOCKEVENTS_BROADCAST = y

  CONFIG_LOCKDEP_SUPPORT = y

  CONFIG_STACKTRACE_SUPPORT = y

  CONFIG_HAVE_LATENCYTOP_SUPPORT = y

  CONFIG_FAST_CMPXCHG_LOCAL = y

  CONFIG_MMU = y

  CONFIG_ZONE_DMA = y

  CONFIG_GENERIC_ISA_DMA = y

  CONFIG_GENERIC_IOMAP = y

  CONFIG_GENERIC_BUG = y

  CONFIG_GENERIC_HWEIGHT = y

  CONFIG_ARCH_MAY_HAVE_PC_FDC = y

  CONFIG_RWSEM_XCHGADD_ALGORITHM = y

  CONFIG_ARCH_HAS_CPU_IDLE_WAIT = y

  CONFIG_GENERIC_CALIBRATE_DELAY = y

  CONFIG_ARCH_HAS_CPU_RELAX = y

  CONFIG_ARCH_HAS_CACHE_LINE_SIZE = y

  CONFIG_HAVE_SETUP_PER_CPU_AREA = y

  CONFIG_ARCH_HIBERNATION_POSSIBLE = y

  CONFIG_ARCH_SUSPEND_POSSIBLE = y

  CONFIG_ARCH_POPULATES_NODE_MAP = y

  CONFIG_ARCH_SUPPORTS_AOUT = y

  CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING = y

  CONFIG_GENERIC_HARDIRQS = y

  CONFIG_GENERIC_IRQ_PROBE = y

  CONFIG_GENERIC_PENDING_IRQ = y

  CONFIG_X86_SMP = y

  CONFIG_X86_32_SMP = y

  CONFIG_X86_HT = y

  CONFIG_X86_BIOS_REBOOT = y

  CONFIG_X86_TRAMPOLINE = y

  CONFIG_KTIME_SCALAR = y

  CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config".

  CONFIG_EXPERIMENTAL = y

  CONFIG_LOCK_KERNEL = y

  CONFIG_INIT_ENV_ARG_LIMIT = 32

  CONFIG_LOCALVERSION =""

  CONFIG_LOCALVERSION_AUTO = y

  CONFIG_SWAP = y

  CONFIG_SYSVIPC = y

  CONFIG_SYSVIPC_SYSCTL = y

  CONFIG_POSIX_MQUEUE = y

  CONFIG_IKCONFIG = y

  CONFIG_IKCONFIG_PROC = y

  CONFIG_LOG_BUF_SHIFT = 18

  CONFIG_HAVE_UNSTABLE_SCHED_CLOCK = y

  CONFIG_SYSFS_DEPRECATED = y

  CONFIG_SYSFS_DEPRECATED_V2 = y

  CONFIG_RELAY = y

  CONFIG_NAMESPACES = y

  CONFIG_BLK_DEV_INITRD = y

  CONFIG_INITRAMFS_SOURCE =""

  CONFIG_CC_OPTIMIZE_FOR_SIZE = y

  CONFIG_SYSCTL = y

  CONFIG_UID16 = y

  CONFIG_SYSCTL_SYSCALL = y

  CONFIG_SYSCTL_SYSCALL_CHECK = y

  CONFIG_KALLSYMS = y

  CONFIG_KALLSYMS_ALL = y

  CONFIG_HOTPLUG = y

  CONFIG_PRINTK = y

  CONFIG_BUG = y

  CONFIG_ELF_CORE = y

  CONFIG_PCSPKR_PLATFORM = y

  CONFIG_COMPAT_BRK = y

  CONFIG_BASE_FULL = y

  CONFIG_FUTEX = y

  CONFIG_ANON_INODES = y

  CONFIG_EPOLL = y

  CONFIG_SIGNALFD = y

  CONFIG_TIMERFD = y

  CONFIG_EVENTFD = y

  CONFIG_SHMEM = y

  CONFIG_VM_EVENT_COUNTERS = y

  CONFIG_SLUB_DEBUG = y

  CONFIG_SLUB = y

  CONFIG_HAVE_OPROFILE = y

  CONFIG_KPROBES = y

  CONFIG_KRETPROBES = y

  CONFIG_HAVE_KPROBES = y

  CONFIG_HAVE_KRETPROBES = y

  CONFIG_PROC_PAGE_MONITOR = y

  CONFIG_SLABINFO = y

  CONFIG_RT_MUTEXES = y

  CONFIG_BASE_SMALL = 0

  CONFIG_MODULES = y

  CONFIG_MODULE_UNLOAD = y

  CONFIG_MODULE_FORCE_UNLOAD = y

  CONFIG_KMOD = y

  CONFIG_STOP_MACHINE = y

  CONFIG_BLOCK = y

  CONFIG_LBD = y

  CONFIG_IOSCHED_NOOP = y

  CONFIG_IOSCHED_AS = y

  CONFIG_IOSCHED_DEADLINE = y

  CONFIG_IOSCHED_CFQ = y

  CONFIG_DEFAULT_CFQ = y

  CONFIG_DEFAULT_IOSCHED = "qfc.

  CONFIG_CLASSIC_RCU = y

  CONFIG_TICK_ONESHOT = y

  CONFIG_NO_HZ = y

  CONFIG_HIGH_RES_TIMERS = y

  CONFIG_GENERIC_CLOCKEVENTS_BUILD = y

  CONFIG_SMP = y

  CONFIG_X86_GENERICARCH = y

  CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER = y

  CONFIG_PARAVIRT_GUEST = y

  CONFIG_VMI = y

  CONFIG_PARAVIRT = y

  CONFIG_X86_CYCLONE_TIMER = y

  CONFIG_MPENTIUMIII = y

  CONFIG_X86_GENERIC = y

  CONFIG_X86_CPU = y

  CONFIG_X86_CMPXCHG = y

  CONFIG_X86_L1_CACHE_SHIFT = 7

  CONFIG_X86_XADD = y

  CONFIG_X86_WP_WORKS_OK = y

  CONFIG_X86_INVLPG = y

  CONFIG_X86_BSWAP = y

  CONFIG_X86_POPAD_OK = y

  CONFIG_X86_GOOD_APIC = y

  CONFIG_X86_INTEL_USERCOPY = y

  CONFIG_X86_USE_PPRO_CHECKSUM = y

  CONFIG_X86_TSC = y

  CONFIG_X86_CMOV = y

  CONFIG_X86_MINIMUM_CPU_FAMILY = 4

  CONFIG_X86_DEBUGCTLMSR = y

  CONFIG_DMI = y

  CONFIG_NR_CPUS = 8

  CONFIG_SCHED_SMT = y

  CONFIG_SCHED_MC = y

  CONFIG_PREEMPT_VOLUNTARY = y

  CONFIG_X86_LOCAL_APIC = y

  CONFIG_X86_IO_APIC = y

  CONFIG_X86_MCE = y

  CONFIG_X86_MCE_NONFATAL = y

  CONFIG_VM86 = y

  CONFIG_MICROCODE = y

  CONFIG_MICROCODE_OLD_INTERFACE = y

  CONFIG_X86_MSR = y

  CONFIG_X86_CPUID = y

  CONFIG_HIGHMEM4G = y

  CONFIG_PAGE_OFFSET = 0XC0000000

  CONFIG_HIGHMEM = y

  CONFIG_SELECT_MEMORY_MODEL = y

  CONFIG_FLATMEM_MANUAL = y

  CONFIG_FLATMEM = y

  CONFIG_FLAT_NODE_MEM_MAP = y

  CONFIG_PAGEFLAGS_EXTENDED = y

  CONFIG_SPLIT_PTLOCK_CPUS = 4

  CONFIG_RESOURCES_64BIT = y

  CONFIG_ZONE_DMA_FLAG = 1

  CONFIG_BOUNCE = y

  CONFIG_VIRT_TO_BUS = y

  CONFIG_MTRR = y

  CONFIG_IRQBALANCE = y

  CONFIG_SECCOMP = y

  CONFIG_HZ_100 = y

  CONFIG_HZ = 100

  CONFIG_SCHED_HRTICK = y

  CONFIG_PHYSICAL_START = 0 X 100000

  CONFIG_PHYSICAL_ALIGN = 0 X 100000

  CONFIG_HOTPLUG_CPU = y

  CONFIG_COMPAT_VDSO = y

  CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG = y

  CONFIG_PM = y

  CONFIG_PM_SLEEP_SMP = y

  CONFIG_PM_SLEEP = y

  CONFIG_SUSPEND = y

  CONFIG_SUSPEND_FREEZER = y

  CONFIG_ACPI = y

  CONFIG_ACPI_SLEEP = y

  CONFIG_ACPI_PROCFS = y

  CONFIG_ACPI_PROCFS_POWER = y

  CONFIG_ACPI_SYSFS_POWER = y

  CONFIG_ACPI_PROC_EVENT = y

  CONFIG_ACPI_AC = y

  CONFIG_ACPI_BATTERY = y

  CONFIG_ACPI_BUTTON = y

  CONFIG_ACPI_FAN = y

  CONFIG_ACPI_DOCK = y

  CONFIG_ACPI_PROCESSOR = y

  CONFIG_ACPI_HOTPLUG_CPU = y

  CONFIG_ACPI_THERMAL = y

  CONFIG_ACPI_BLACKLIST_YEAR = 2001

  CONFIG_ACPI_DEBUG = y

  CONFIG_ACPI_EC = y

  CONFIG_ACPI_POWER = y

  CONFIG_ACPI_SYSTEM = y

  CONFIG_X86_PM_TIMER = y

  CONFIG_ACPI_CONTAINER = y

  CONFIG_CPU_FREQ = y

  CONFIG_CPU_FREQ_TABLE = y

  CONFIG_CPU_FREQ_DEBUG = y

  CONFIG_CPU_FREQ_STAT = y

  CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE = y

  CONFIG_CPU_FREQ_GOV_PERFORMANCE = y

  CONFIG_CPU_FREQ_GOV_USERSPACE = y

  CONFIG_CPU_FREQ_GOV_ONDEMAND = y

  CONFIG_CPU_FREQ_GOV_CONSERVATIVE = y

  CONFIG_X86_ACPI_CPUFREQ = y

  CONFIG_X86_POWERNOW_K8 = y

  CONFIG_X86_POWERNOW_K8_ACPI = y

  CONFIG_X86_ACPI_CPUFREQ_PROC_INTF = y

  CONFIG_CPU_IDLE = y

  CONFIG_CPU_IDLE_GOV_LADDER = y

  CONFIG_CPU_IDLE_GOV_MENU = y

  CONFIG_PCI = y

  CONFIG_PCI_GOANY = y

  CONFIG_PCI_BIOS = y

  CONFIG_PCI_DIRECT = y

  CONFIG_PCI_MMCONFIG = y

  CONFIG_PCI_DOMAINS = y

  CONFIG_ARCH_SUPPORTS_MSI = y

  CONFIG_PCI_MSI = y

  CONFIG_PCI_LEGACY = y

  CONFIG_ISA_DMA_API = y

  CONFIG_K8_NB = y

  CONFIG_BINFMT_ELF = y

  CONFIG_NET = y

  CONFIG_PACKET = y

  CONFIG_UNIX = y

  CONFIG_INET = y

  CONFIG_IP_MULTICAST = y

  CONFIG_IP_FIB_HASH = y

  CONFIG_IP_PNP = y

  CONFIG_IP_PNP_DHCP = y

  CONFIG_INET_DIAG = y

  CONFIG_INET_TCP_DIAG = y

  CONFIG_TCP_CONG_CUBIC = y

  CONFIG_DEFAULT_TCP_CONG = "cubic."

  CONFIG_UEVENT_HELPER_PATH = "/ sbin/hotplug.

  CONFIG_STANDALONE = y

  CONFIG_PREVENT_FIRMWARE_BUILD = y

  CONFIG_FW_LOADER = y

  CONFIG_PNP = y

  CONFIG_PNPACPI = y

  CONFIG_BLK_DEV = y

  CONFIG_BLK_DEV_FD = y

  CONFIG_BLK_DEV_LOOP = y

  CONFIG_BLK_DEV_RAM = y

  CONFIG_BLK_DEV_RAM_COUNT = 16

  CONFIG_BLK_DEV_RAM_SIZE = 4096

  CONFIG_HAVE_IDE = y

  CONFIG_IDE = y

  CONFIG_BLK_DEV_IDE = y

  CONFIG_BLK_DEV_IDEDISK = y

  CONFIG_IDEDISK_MULTI_MODE = y

  CONFIG_BLK_DEV_IDECD = y

  CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS = y

  CONFIG_BLK_DEV_IDEACPI = y

  CONFIG_IDE_PROC_FS = y

  CONFIG_IDE_GENERIC = y

  CONFIG_BLK_DEV_IDEDMA_SFF = y

  CONFIG_BLK_DEV_IDEPCI = y

  CONFIG_BLK_DEV_IDEDMA_PCI = y

  CONFIG_BLK_DEV_PIIX = y

  CONFIG_BLK_DEV_IDEDMA = y

  CONFIG_SCSI = y

  CONFIG_SCSI_DMA = y

  CONFIG_SCSI_NETLINK = y

  CONFIG_BLK_DEV_SD = y

  CONFIG_CHR_DEV_SG = y

  CONFIG_SCSI_WAIT_SCAN = m

  CONFIG_SCSI_SPI_ATTRS = y

  CONFIG_SCSI_FC_ATTRS = y

  CONFIG_SCSI_LOWLEVEL = y

  CONFIG_MD = y

  CONFIG_FUSION = y

  CONFIG_FUSION_SPI = y

  CONFIG_FUSION_MAX_SGE = 128

  CONFIG_NETDEVICES = y

  CONFIG_NETDEVICES_MULTIQUEUE = y

  CONFIG_NET_ETHERNET = y

  CONFIG_MII = y

  CONFIG_NETDEV_1000 = y

  CONFIG_E1000 = y

  CONFIG_NETCONSOLE = y

  CONFIG_NETPOLL = y

  CONFIG_NET_POLL_CONTROLLER = y

  CONFIG_INPUT = y

  CONFIG_INPUT_MOUSEDEV = y

  CONFIG_INPUT_MOUSEDEV_PSAUX = y

  CONFIG_INPUT_MOUSEDEV_SCREEN_X = 1024

  CONFIG_INPUT_MOUSEDEV_SCREEN_Y = 768

  CONFIG_INPUT_EVDEV = y

  CONFIG_INPUT_KEYBOARD = y

  CONFIG_KEYBOARD_ATKBD = y

  CONFIG_INPUT_MOUSE = y

  CONFIG_MOUSE_PS2 = y

  CONFIG_MOUSE_PS2_ALPS = y

  CONFIG_MOUSE_PS2_LOGIPS2PP = y

  CONFIG_MOUSE_PS2_SYNAPTICS = y

  CONFIG_MOUSE_PS2_LIFEBOOK = y

  CONFIG_MOUSE_PS2_TRACKPOINT = y

  CONFIG_SERIO = y

  CONFIG_SERIO_I8042 = y

  CONFIG_SERIO_LIBPS2 = y

  CONFIG_VT = y

  CONFIG_VT_CONSOLE = y

  CONFIG_HW_CONSOLE = y

  CONFIG_DEVKMEM = y

  CONFIG_SERIAL_8250 = y

  CONFIG_SERIAL_8250_CONSOLE = y

  CONFIG_FIX_EARLYCON_MEM = y

  CONFIG_SERIAL_8250_PCI = y

  CONFIG_SERIAL_8250_PNP = y

  CONFIG_SERIAL_8250_NR_UARTS = 4

  CONFIG_SERIAL_8250_RUNTIME_UARTS = 4

  CONFIG_SERIAL_CORE = y

  CONFIG_SERIAL_CORE_CONSOLE = y

  CONFIG_UNIX98_PTYS = y

  CONFIG_LEGACY_PTYS = y

  CONFIG_LEGACY_PTY_COUNT = 256

  CONFIG_HW_RANDOM = y

  CONFIG_RTC = y

  CONFIG_RAW_DRIVER = y

  CONFIG_MAX_RAW_DEVS = 256

  CONFIG_DEVPORT = y

  CONFIG_POWER_SUPPLY = y

  CONFIG_THERMAL = y

  CONFIG_SSB_POSSIBLE = y

  CONFIG_SSB = y

  CONFIG_SSB_SPROM = y

  CONFIG_SSB_PCIHOST_POSSIBLE = y

  CONFIG_SSB_PCIHOST = y

  CONFIG_SSB_DRIVER_PCICORE_POSSIBLE = y

  CONFIG_SSB_DRIVER_PCICORE = y

  CONFIG_DAB = y

  CONFIG_AGP = y

  CONFIG_AGP_AMD64 = y

  CONFIG_AGP_INTEL = y

  CONFIG_VGA_CONSOLE = y

  CONFIG_VGACON_SOFT_SCROLLBACK = y

  CONFIG_VGACON_SOFT_SCROLLBACK_SIZE = 128

  CONFIG_VIDEO_SELECT = y

  CONFIG_DUMMY_CONSOLE = y

  CONFIG_SOUND = y

  CONFIG_SOUND_PRIME = y

  CONFIG_HID_SUPPORT = y

  CONFIG_HID = y

  CONFIG_USB_HID = y

  CONFIG_USB_SUPPORT = y

  CONFIG_USB_ARCH_HAS_HCD = y

  CONFIG_USB_ARCH_HAS_OHCI = y

  CONFIG_USB_ARCH_HAS_EHCI = y

  CONFIG_USB = y

  CONFIG_USB_DEVICEFS = y

  CONFIG_USB_EHCI_HCD = y

  CONFIG_USB_OHCI_HCD = y

  CONFIG_USB_OHCI_LITTLE_ENDIAN = y

  CONFIG_USB_UHCI_HCD = y

  CONFIG_USB_STORAGE = y

  CONFIG_DMIID = y

  CONFIG_EXT2_FS = y

  CONFIG_EXT2_FS_XATTR = y

  CONFIG_EXT2_FS_POSIX_ACL = y

  CONFIG_EXT3_FS = y

  CONFIG_EXT3_FS_XATTR = y

  CONFIG_EXT3_FS_POSIX_ACL = y

  CONFIG_JBD = y

  CONFIG_FS_MBCACHE = y

  CONFIG_JFS_FS = y

  CONFIG_FS_POSIX_ACL = y

  CONFIG_DNOTIFY = y

  CONFIG_INOTIFY = y

  CONFIG_INOTIFY_USER = y

  CONFIG_AUTOFS4_FS = y

  CONFIG_GENERIC_ACL = y

  CONFIG_ISO9660_FS = y

  CONFIG_FAT_FS = y

  CONFIG_MSDOS_FS = y

  CONFIG_VFAT_FS = y

  CONFIG_FAT_DEFAULT_CODEPAGE = 437

  CONFIG_FAT_DEFAULT_IOCHARSET = "iso8859-1".

  CONFIG_PROC_FS = y

  CONFIG_PROC_KCORE = y

  CONFIG_PROC_SYSCTL = y

  CONFIG_SYSFS = y

  CONFIG_TMPFS = y

  CONFIG_TMPFS_POSIX_ACL = y

  CONFIG_HUGETLBFS = y

  CONFIG_HUGETLB_PAGE = y

  CONFIG_MSDOS_PARTITION = y

  CONFIG_NLS = y

  CONFIG_NLS_DEFAULT = "iso8859-1".

  CONFIG_NLS_CODEPAGE_437 = y

  CONFIG_NLS_ASCII = y

  CONFIG_NLS_ISO8859_1 = y

  CONFIG_NLS_ISO8859_15 = y

  CONFIG_NLS_UTF8 = y

  CONFIG_TRACE_IRQFLAGS_SUPPORT = y

  CONFIG_ENABLE_WARN_DEPRECATED = y

  CONFIG_FRAME_WARN = 1024

  CONFIG_MAGIC_SYSRQ = y

  CONFIG_UNUSED_SYMBOLS = y

  CONFIG_DEBUG_KERNEL = y

  CONFIG_DETECT_SOFTLOCKUP = y

  CONFIG_TIMER_STATS = y

  CONFIG_DEBUG_BUGVERBOSE = y

  CONFIG_HAVE_ARCH_KGDB = y

  CONFIG_EARLY_PRINTK = y

  CONFIG_DEBUG_STACKOVERFLOW = y

  CONFIG_X86_FIND_SMP_CONFIG = y

  CONFIG_X86_MPPARSE = y

  CONFIG_DOUBLEFAULT = y

  CONFIG_IO_DELAY_TYPE_0X80 = 0

  CONFIG_IO_DELAY_TYPE_0XED = 1

  CONFIG_IO_DELAY_TYPE_UDELAY = 2

  CONFIG_IO_DELAY_TYPE_NONE = 3

  CONFIG_IO_DELAY_0X80 = y

  CONFIG_DEFAULT_IO_DELAY_TYPE = 0

  CONFIG_CRYPTO = y

  CONFIG_CRYPTO_HW = y

  CONFIG_HAVE_KVM = y

  CONFIG_BITREVERSE = y

  CONFIG_GENERIC_FIND_FIRST_BIT = y

  CONFIG_GENERIC_FIND_NEXT_BIT = y

  CONFIG_CRC32 = y

  CONFIG_PLIST = y

  CONFIG_HAS_IOMEM = y

  CONFIG_HAS_IOPORT = y

  CONFIG_HAS_DMA = y

  Hi Nick,

  This is related to a core issue that we have identified a few days back.  I posted a patch to fix the problem on this thread.

  http://lkml.org/LKML/2009/2/6/339

  Can you or someone else see what you problem apply the patch from this link and see if that fixes the problem for you.

  This bug has been introduced in the about 2.6.25 kernel for every kernel 2.6.25 from time will be bad.

  Thank you

  Alok

• 6 fusion works with El Capitan in the host operating system?

  I saw the thread on the Fusion 7 and El Capitan, but I wonder about the Fusion 6 and El Capitan.  I know that El Capitan works as a guest OS with Yosemite as the host and the latest version of Fusion 6 (I'm under the commercial version of El Capitan in a virtual machine on my Yosemite iMac running), but I have not really improved none of my systems to El Capitan again.

  Thank you.

  I use 6 merger with AE Capitan. It seems.

• Use instead of ESX ESXi with vCenter

  Hello.

  I wonder if I change all hypervisors to ESX 4.1, ESXi 4.1, some of the advanced features such as HA and FT are still available or not.

  HA & FT are permitted.

  Thank you.

  Hello

  ESXi has all the features of ESX when full his license.

  Although you no longer have a service console, you will still be able to use HA / DRS / FT / pools of resources etc.

  ESXi is not an ESX reduced in functionality, it just has a smaller footprint.

• Update ESXi with a Virtual Center Server

  Hello

  I've updated a Standalone ESXi server using this guide

  http://www.vmadmin.co.UK/VMware/35-esxserver/262-esxvihostupdate

  It works the same way during the updating of the ESXi servers that are under a virtual Center Server?

  Thank you

  as part of the upgrade, using Crossover, a new vCenter agent is pushed. So, no, you don't break anything.

• problem with vcenter start after the installation of the heart rate

  Hello. I installed vmware vcenter 5.5 then install vcenter server heartbeat 6.6 and after restart sytem and rename the main node for the system to restart after sytem is som vcenter service startup cannot run example Vmware Virtualcenter server Service cannot start so I can't connet with vsphere vCenter client and cannot start manually that do now what do I do?

  I installed only primarynode and just get the head node clone

  they are both my virtual nodes

  Please help me

  Buffer Cache Hit Ratio is the percentage of sql server pages requested and retrieved from the buffer cache without reading disc.

  It is not necessarily a problem. A way to increase the buffer Cache Hit Ratio might be to increase the memory on the virtual computer. If you feel that the performance is not a problem, you can modify the rule so that it is less than 90% so that the rule is triggered, but Microsoft recommends 90 + %.

• Upgrade to 4.1 - U1 with stains staged on the host

  I want to upgrade the two hosts that are running 4.0 to 4.1 U1 U2.  A host has some stage patches for 4.0.  Is it possible to not restore the patches and apply the upgrade?  They will delete after the upgrade?  Or what I need to fix these updates staged, and then restore the upgrade?

  Thank you

  You can go ahead and clean up the upgrade of base without cleaning up the existing staging patches.

  VUM will return the error incase there is no freespace available for upgrade packages.

• Cannot update Table with form data in the SQL statement

  Hello. Joined the zip file of the error and the cfm 2 pages... selectstudents.cfm goes first.

  The question I have, is that the database is not being updated when I run the page editroster.cfm, submitted from the selectstudents.cfm page. Students #FORM. Exercise #_Class column should be filled with the #URL. ClassID # if the box is checked on the selectstudents.cfm page.

  Thanks for the help! It is appreciated

  I swear that I can kill text editor enriched this forum before the day is done (it can not be me). He stripped the part of the code for the function ListQualify. It should be

  WHERE Ad_Username IN (#ListQualify(Form.Checkbox,"'")#)
  

  The single quote was somehow unpacked since the quotation marks that surround it.

• How update maps with newer streets on the streets & trips

  Recently, I tried to find specific addresses in subdivisions that are about 10 years old, but MS S & T know they exist.

  How can I update so that he knows the last orders?

  Hello

  1. have you made changes on the computer recently?

  2. What is the message you get when you try to search for specific addresses?

  You can check these links for more information.

  http://www.Microsoft.com/streets/en-us/default.aspx

  Support for MapPoint, streets & trips and Highway: http://support.microsoft.com/ph/1058

  For more information:

  You cannot update the information of plan after the MapPoint or Streets & Trips programs are released

  http://support.Microsoft.com/kb/328830

  Microsoft Streets and Trips 2011 and data MapPoint 2011 Construction update
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=6983

  I hope this helps.

• Restart host ESXi 4.0 with vCenter 4.0 as a virtual machine

  I have two hosts ESXi 4.0:

  1. the host 1 has vCenter 4.0 installed as a virtual machine with a VMware data recovery VM and some other virtual machines.

  2 host 2 has a number of virtual machines.

  I want to restart the first host and level to ESXi 4.0 Update 1 - I won't stop VMs on host 2, and I want to improve it yet.

  My plan is to stop all VMs on host 1 letting the vCenter VM until the last. I have then place my host in maintenance mode and run the host update application to install the update which will then require a restart of course. Once restarted, I'll connect to host 1 directly by using the vSphere client and restart the VM vCenter. I will then restart all my other virtual machines.

  Is this sound OK? VCenter will restart Fortunately?

  You can also power off the vCenter, register on the other (ESX) If you have the shared storage and try again.

  Be sure only to say I_moved about the question that appear when you turn on the virtual computer.

  André

• Unable to connect to update ESXi host to vCenter

  So I have a client who does the following:

  Added several hosts, vCenter, went to install the updates using the Update Manager.  Host selected and selected re-mediation.  Server through the remediation proposals and restarted.  After server comes back online after the first reboot, it is impossible to connect to vCenter.

  Updated version: 5.5U3b ESXi

  Any help would be greatly appreciated.

  Sean.

  Hello

  I assume that your customer has forgotten to update the vCenter server before it has updated the hosts.

  You must have at least version 5.5 U3b on the vCenter to manage the hosts of these version.

  See interop matrix:

  https://www.VMware.com/resources/compatibility/SIM/interop_matrix.php

  Tim

• Update the host ESX 3.5 and 2.5 to Vcenter

  Hello

  I'm new to editing an entire ESX infrastructure and would like to know the correct way to update all client Vcenter and Vi ESX hosts.

  If I missed any foregoing update please let me know.

  What I've done so far is to update all ESX hosts, with the help of VMware Update Manager, they are all being updated now, so, where can I go next, Vcenter, then Vi customers, etc.

  Thank you

  Mike

  The upgrade should go as follows:

  1 vCenter

  2 ESX host

  3 VMware Guest Tools.