Update of popup when the export dialog box is open

Similar Questions

• Overview of the output only works when the preview dialog box is open?

  The preview of the output adjustment certainly between into force, but only when the output preview dialog box is open, while precisely the preview of the images in playback mode is not possible; It is only possible to preview by clicking on an image and open the dialog of OP. As soon as the OP dialog box is closed, the image reverts to its prior Preview State. This is not normal!

  That's how it has always been. Keep in mind, this is a modeless dialog box, it prevents you to navigate through the file.

  What do you mean by "reading mode" specifically and why you can not use?

• Sharpen in the develop module or in the export dialog box?

  Interpreted by using LR, "output sharpening is in addition to any sharpening you apply in the develop module.» So, I wonder, if do sharpen in the develop module (which is usually the case, because I ask to sharpen when importing as a preset) should still possible sharpening on export (Export, dialog-> output sharpening)? My workflow is usually as follows: 12 mp raws of import, with a "Preset" involving some sharpening (55,1,40,0), then make some adjustments for the photos and I export to jpg with a heavy (long edge 800pix) resize. Export I usually check "sharpen to: screen" "amount: standard." This is my workflow sharpening OK?

  Thank you.

  Yes. Sharpening in two different points. Sharpening during sharpening - develop entered to correct the softness introduced during of conversion of camera detector and later Demosaic process. It's the sharpness that you can easily see the edges more than giving contrast to full view.

  Output sharpening is dependent on the display of the output (in general, print or screen) and is a different animal.

  There are a lot of references inthese communications forums and debates on the differences and the reasoning and the math behind how to Lr.

• When a modal dialog box is open, and you click anywhere else, there are much too many blinks of this window

  What settings can I change the number of flashes of the modal window

  It is currently set to 6 so it seems and with the software, that I work with is quite disturbing.

  For example, to open the Panel of-> region and language-> additional settings

  A new window should open to the right and down and on top of your active window.

  Is it happens click on the previous window (behind the one that just opened), you should see the window flashes 6 times.

  How can I change something like: say 3?

  Thank you

  After you have backed up your registry database (in case something goes wrong) please see Windows 7 / 8 stop dialogue modal flash Focus parent. If you find that more useful, use a value of 3 instead of 1.

  HTH,

  Andrew

• Helps the modal dialog box a value back to the calling page

  Greetings,
  
  Apex Version: 4.1.0.0.32
  
  
  What I'm trying to do is create a modal dialogue that is called from a form page. The user dialog box will report to IR which allow him to select a line and send a value of this line to a field of the calling page. I work in Firefox, but I get an error using IE 8. I hope that someone can show me why it does not work in Internet Explorer.
  
  Here's how I do it:
  
  Of the calling page:
  
  Created a button
  Action: Redirect URL
  Target URL: javascript:var rc = window.showModalDialog ('f? p = & APP_ID.:70: & SESSION.: & DEBUG.:', ",'resizable: Yes;) Center: Yes; dialogWidth:1000px; dialogHeight:500px ;') ;
  
  
  On the page called:
  
  The called page is an IR report where the query returns this as one of the columns:
  
  * (Note: I had to put a point '.' before the onclick so he could show in this thread.) It is not there in my actual code.) *
  

  select
  <a href="#" name="z" style="color:blue; text-decoration:underline;" .onclick="javascript:passBack(''' || LOT_NO ||''');">Select</a>' SelectThis
  , column1
  , column2
  from sometablename;

  This solves the anchor:

  <a .onclick="javascript:passBack('232158');"  href="#">Select</a>

  Here is the function Javascript is called the anchor onclick:
  

  function passBack(passVal1)
  {
    opener.document.getElementById("P75_ITEM1").value = passVal1;
    close();
  }

  When I run the present in Firefox, it works as expected. I click the button on the parent page. The modal dialog box is open and the report of the IR is displayed. I click on one of the links in the report and it returns the correct value to the appellant and closed page modal dialog box.
  
  When I run it in IE8, it fails. I click the button on the parent page. The modal dialog box is open and the report of the IR is displayed. I click on one of the links in the report and I get this error: 'opener.document is null or not an object ".
  
  I hope that it is clear and that someone can help.
  
  Thank you
  
  Larry

  A quick google search determines that window.opener does not exist when you use window.showModalDialog

  Range of suggestions to use window.open instead of window.showModalDialog to use instead of window.opener dialogArguments

  Try the following:

  The parent page to define a getPopupValue() function:

   function getPopupValue(){
     var dr =  window.showModalDialog('f?p=&APP_ID.:70:&SESSION.::&DEBUG.:::','','resizable:yes;center:yes;dialogWidth:1000px;dialogHeight:500px;');
  
      if ( (dr != undefined) && (dr != '') && (dr != false) ){
       $x("P75_ITEM1").value = dr;
      }
   }
  

  Change the url of the button to call the function:

   javascript:getPopupValue(); 
  

  On the popup page change the valve function for:

  function passBack(passVal1)
  {
    returnValue = passVal1;
    close();
  }
  

• Export dialog box has suddenly stopped working (internal error)

  V4.1.0.18 SQL Developer build HAND-18, 37

  The data export dialog box (by right-clicking in a query result) suddenly stopped working this morning. The window of dialogue where I normally happens to choose a destination and format file refuses to say another thing that 'internal error during an attempt create this panel', followed by a big chunk of things related to java:

  

  Yesterday, everything was fine. Can someone help me fix this, or point me in the right direction?

  If I run an older version (Build HAND - 13.80 v4.0.0.13) the export dialog box works as expected...

  No idea on how to delete a version

  There is no aspect of registry of a SQL Developer installation.  Only...

  1. the folder where you install SQL Developer.  You should always unzip into an empty folder, of course.

  2. the folder which contains the parameters of the user (either the default value, initial settings or settings migrate one installs it earlier).

  For WIndows Vista & upwards, for example, the default user settings for all installations of SQL Developer are under Developer %APPDATA%\SQL.

  The %AppData%\microsoft\windows\sendto is something like C:\Users\\AppData\Roaming.  Win XP used a slightly different naming convention.  Each facility has a record for its parameters to the user of the SystemN.N.N.N.Nform.  Don't forget that AppData is one of those hidden Windows folders.

  So the current production facility will have user settings in C:\Users\\AppData\Roaming\SQL Developer\system4.1.1.19.59.

  For SQL Developer 4.0 & upward, there is also a separate C:\Users\\AppData\Roaming\sqldeveloper\...\product.conf to point to the JDK.

  It's always a good idea to export your definitions of connection for installation before nuking its SystemN.N.N.N.N folders.

  So, delete a SQL Developer installation is also simple to delete the installation directory and the directory of the user for this version parameters.

  Moreover, the Export page for 4.0.0.13.80 utility preferences (and 4.1.1.19.59 is the same) should look to...

  

• How to get the name of the file in the file dialog box

  Hi all

  I use the file dialog box to open a file and read the contents of it. However, I want to show the name of the opened file and do not know how to do it.

  Someone has an idea to display the name of the opened file?

  Thank you.

  Hi powerplay.

  the file dialog box has an output "selected path. You can use the path of the strip function to get only the file name.

  Mike

• When I connect my camera (panasonic TZ5) to my PC. the AutoPlay dialog box does not appear. Help

  When I connect my camera (Panasonic TZ5) to my PC. The AutoPlay dialog box does not appear. Help please

  Hello

  · What is the operating system installed on the computer?

  · Were there any changes made on the computer before the show?

  You can access the link below which holds information on the problems of auto play: http://windows.microsoft.com/en-US/windows7/Troubleshoot-AutoPlay-problems

• How to use the Run dialog box to get a history of the MS updates

  What command is entered in the Run dialog box to get a history of all the Microsoft Updates that have been downloaded?

  Disregared review updatehistory option on the Microsoft Updates web site.

  Strictly speaking run here dialog box

  For Windows XP, of course

  Open Add/Remove programs and make sure that the show updates at the top box is checked. Scroll & you will see a (long) list of Windows updates, you have installed.

  On the other hand, you can find Belarc Advisor more to your taste: http://www.belarc.com/free_download.html

  PS: CrystalBall sez you can see http://aumha.net/viewtopic.php?f=62&t=33827

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• is it possible to hide the system dialog box when app is happening in the background

  Hello

  I want to hide the system dialog box when our application is underway in the background...

  any suggestion would be appreciated

  Thank you

  Ankur

  Use onThumnailed()

  and this, write the code to hide the system dialog box.

  go through this link too:

  https://developer.BlackBerry.com/Cascades/reference/bb__application.html#function-thumbnail

• Why red spots appear on my photo when I import a RAW image in the RAW dialog box?

  I just downloaded 13 items.  When I import a RAW image in the RAW dialog box, large red spots appear on the image, before you do anything.  I can't get rid of them, and restart the program has no effect.  I did not have this problem with 11 elements.  Thanks for any input.

  You probably have the highlight clipping warning

  Press O on the keyboard or click the triangle shown in the screenshot below to turn it off.

  

• How do you remove the watermark preset in the file > export dialog box?

  I'm new to Lightroom, but so far I like it. However, I'm trying to figure out how to remove the watermark preset in the file > export dialog box. I have some that are duplicates.

  Open the Preferences of Lightroom window and select the Presets tab click the button labeled "Show Lightroom Presets folder...". It will open a window of type OS containing folders. Find the folder named Lightroom and it contains, you should also find a subfolder named 'Watermarks'. Your presets watermark must be in this folder.

  

• When to wake up the virtual machine of the suspension of the next dialog box appears?

  Hello and thank you...

  I use VM Fusion 4.1.3 on a MacBook Pro mid-2009 with the Mountain Lion. Since I installed VM Fusion 4, the following dialog box appears whenever I wake the machine of suspension. I click ok and everything works fine. I would like to pass it if possible and I must emphasize that everything works perfectly after I get back okay. Any help would be appreciated.

  Thanks in advance and I have attached a screenshot

  Well, you could do as suggested in the message!

  Or add the following line to the .vmx config file.

  buslogic.nodriver = "FALSE"
  

  Take a look on: modifying the .vmx for your merge file< virtual="" machine="">

• Ho I unselect the "cela automatically for files like this in the future." in the download dialog box?

  I clicked on the "this automatically for files like this in the future" by mistake in the download dialog box. I want to open a pdf file in adobe when I click on the link. currently the file gets saved and I can't change it. I have read through the suggestions and go in tools > options > applications and reassigned the pdf options asking first and firefox always download just the files somewhere. I don't want this option and I need to uncheck the automatic box.

  How then?
  I really want to talk to someone on the phone.

  First of all, please update Firefox 18. Update Firefox to the latest version

  Then read Firefox Refresh - reset the parameters and modules

• Stop, reboot is not available on the stop dialog box

  I have a XP SP3 box that does not "Shutdown" or "Restart" as options in the shutdown dialog box (the box that you see when you click on stop in the start menu.)  The only option available is to disconnect.  I see no issues update, AV is up to date.  The machine is part of a domain, but I checked the local security and domain strategies to see if 'hide closed' was enabled, but it wasn't.

  Any ideas as to the cause?  Thank you.

  I had a similar problem. I found a solution through SevenForums: the link below has a REG file download that fixed this easily (option 1).

  http://www.SevenForums.com/tutorials/148605-shut-down-restart-sleep-hibernate-commands-add-remove.html
  He added the controls in the registry. After the merger of the file with regedit and reboot, the buttons have been restored in the Start Menu.