Update of the firmware/BIOS using OME and iDRAC

Similar Questions

• After you install an update from the HP BIOS, speakers and microphone are disabled on the g6-1b79dx Pavilion

  After an automatic update of the HP BIOS a few minutes ago, the speakers and the microphone does not work

  No error messages at all

  System controls function without problems

  My laptop is a g6-1b79dx Pavilion

  OS: Windows 7 Home Premium

  Any help will be appreciated

  Thank you

  Ernesto

  Thanks for the reply

  I'm not using any HDMI component connected to the computer

  What I did to install a version of the BIOS previuos published 2011-05-27

  Here is the link where I downloaded it.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-95802-1&CC=US&DLC=en&LC=en&os=4063&Product=5118797&sw_lang=

  After I reinstalled the BIOS, I wound up off the PC, and now the speakers and the microphone are ok

  Thanks for your help

  Ernesto

• Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type

  Title: download original ROM files on Vista

  Try to download an update of the firmware with a file extension ROM Vista says it's an unrecognized file type. Patches?

  You must get the update of the firmware that can handle the type of file the same place ROMA, you got the firmware file.  From what I see, they seem specific to the product updated. http://www.FileInfo.com/extension/ROM if they don't have it, talk to their technical support staff and ask them what type of program is required to install the firmware provided in ROM format and where you can get it.  Vista doesn't have the ability to read a file ROM type  Some software must be added to give this capability.

  Here is an article I read: "various hardware upgrades and emulators use the ROM file extension." A user needs a flash program usually available on the website of the manufacturer of the motherboard. The user must not flashing BIOS unless the user knows that he has the image of his mother. An error or the computer may be turned off when the wrong BIOS image is flashed. "So be very careful here, or you can completely disable your system.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Tecra A10 - 1GW (PTSB1E) - update of the firmware & chipset failed

  Hello!

  in fact, I have two problems on my laptop (32-bit) windows 7:

  Burning programs do not find my burner (called 'MAT * a DVD-RAM UJ880AS' Device Manager) and even the [update of the firmware | http://de.computers.toshiba-europe.com/innovation/download_driver_details.jsp?service=DE&selCategory = 2 & selFamily = 5 & selSeries = 155 & selProduct = 809 & langua ge = 17 & selOS = 29 & selType = 50 & yearupload = & monthupload = & dayupload = & useDate = null & mode = allMachines & search = & action = search & macId = & country = 12 & 1 7 = selectedLanguage & type = 50 & page = 1 & FROM = windows7 & ID = 68407 & DISO =-1 & driverLanguage = 42] cannot [find him | http://img705.imageshack.us/f/fehler2.png/]. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  Internal burning function Windows works _sometimes_ and disc playback as usual.

  Chipset driver updat doesn't work.
  The [error message: http://img827.imageshack.us/f/fehler1.png/] said 'requirements for the installation of this software is not met. the installation program is abandoned.
  I don't know, I chose the right driver.

  All attempts have been made under administrator rights and disabled antivirus.

  Thanks for help
  Tablerocker

  p.s.: the windows shortcut (just the shortcut!) + e works, too ([unknown error | http://img137.imageshack.us/f/fehler3.png/]). but I don't think it's a problem toshiba ;-)

  > Burning-programs do not find my burner (Device Manager named him "MAT * a DVD-RAM UJ880AS") and even the firmware does not find it. Although the official web page of toshiba called mast * su * a, i belive it is the correct driver.

  What is the status of the STRANGE in Device Manager?
  Are there any yellow exclamation marks?

  I recommend you remove/clear the STRANGE since the Device Manager.
  Then start the registry and delete the upper and lower registry key filters:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, restart the device. Windows should recognize the STRANGE again.

  Regarding the driver chipset;
  The A10 - 1GW supports the Chipset mobile Intel GM45 Express.
  http://www.Intel.com/products/Notebook/chipsets/GM45/GM45-overview.htm

  If you use the driver from the Intel page, then you should try installing the chipset in Device Manager. This allows to force Windows choose the driver Intel

• Can I reset the update of the firmware on Qosmio G20?

  I have a Qosmio G20 and I think that something was wrong when I updated the firmware.
  Now, I have no operating system. Is it possible to reset the firmware?

  Type of CD-rom is MATSU * A UJ-846-C

  Hello!

  Why you don t have an operating system if you have updated the firmware?
  I'm a little confused on this, because the update of the firmware doesn t affect the HDD m functionality

  That you get an error message before you try to start in Windows?
  If not try to load the defaults in the BIOS as athan1001 said and please give us more details.

  Good bye

• If this isn't the case, juggling with the updates of the Firmware installation will be updated install all prerequisite updates?

  I am currently using a Netgear WNR2000v3 wireless router. I've never installed the Firmware/Software updates. If I install the latest update of the Firmware/Software

  (Firmware Version 1.1.2.10), this includes all previous updates or do I return completely and install the updates of the Firmware/Software in the order in which they were made?

  Just the last one will do.

• with regard to the update of the firmware WAG54G2

  Hello everyone

  I just get new ADSL modem + router linksys... and it works fine

  just wonder... If you guys recommending me to upgrade the firmware or using current?

  my current Firmware Version WAG54G2: V1.00.10

  It seems a lot on improving V1.00.16, but sometimes it can increase the question rather than improve performance...

  so I would like to know how people here recommend to update or stay there if I have any problems

  Thanks in advance

  If you are having problems with your Linksys ADSL2 + Gateway (WAG54G2), then you should definitely look forward to update its firmware... If your gateway WAG54G2 works very well without giving you any problem so do not upgrade it...

  Any attempt to improve a system that already works is useless...

  Remember 'if it isn't broken don't fix.

• Huh? "Remote Control Panel" came with the update of the firmware, LaserJet P4014n

  I have 3 Laserjet P4014n recently updated to firmware 20140127 04.210.5.  If I use EWS log in as local administrator I see there's a new entry on the tab named "Remote Control Panel. I'd love to see what he does, but I can't.

  With the help of IE11, I click on 'Remote Control Panel' and receive a alert 'ActiveX settings are required to use the remote control panel. There is an 'OK' button below this alert. By clicking on the button 'OK' makes me a "sorry, unsupported browser.

  I fooled with my settings ActiveX IE11 and not got anywhere. The documentation for the update of the firmware is vague.

  Can someone tell me what is this new feature of 'Remote Control Panel' intrigueing?

  Answering my own question:

  A couple firmware updates, this EWS feature has been removed from my P4014n printers but added to my printers LaserJet Enterprise M601n.

  I dropped the past months trying to understand what he's doing since clicking on it never did much. But today, I accidently clicked on 'Remote Control Panel' and got a double chart of the front of the printer with all the buttons (OK, up/down arrows, red X, home, back and a numeric keypad). There is also an option "restart".

  It's very cool like SAP M601n does not in any way to simply cancel a job stuck in the queue. I was remotely restart the printer.

• How will I know if the update of the firmware which is due a minuite was released?

  How will I know if the update of the firmware which is due a minuite was released?

  And how do I know the improvements and stuff?

  Thank you

  SR

  SR - rox wrote:

  How will I know if the update of the firmware which is due a minuite was released?

  And how do I know the improvements and stuff?

  Thank you

  SR

  The new firmware is displayed in the thread to update the Firmware Sansa Fuze, which will be reset and cleaned. The change log will be part of the first post in this same thread. In addition to this it will be impossible to miss. People will speak on this subject.

• Hi my name is LukaszT I would like to know if there will be an update of the firmware Linksys WRT54G2 v1

  Hi my name is LukaszT I would like to know if there will be an update of the firmware Linksys WRT54G2 v1.  I don't see any of the firmwares in the list of downloads

  There is a firmware (version 1.0.04)is) available on the site Web of Linksys router WRT54G2 V1.

  Follow this link and check the firmware available. Select the hardware version 1.0 V.

• What is caught after an update of the firmware

  I want to put the firmware on my router. I want to assure you once I have install the firmware I restore some settings. If I do a backup of the settings before upgrading the firmware and then restore the settings after that the update of the firmware will be the WEP key and SSID be restored?

  Thank you.

• Update for the Firmware Cluster HA

  The default behavior of an update of the firmware of cluster HA is that it will update firstly the backup firewall, restart, failover to the backup, reboot and main firewall update.

  Is there a possibility to upgrade a SINGLE unit in the cluster to a new version of firmware, check this new version for a few days and then after the update of the other unit?

  I had a problem to upgrade from a cluster of 2 firewalls section 5.9.1.1 to 5.9.1.5. After a few hours the two firewall restarted permanently after availability of 5 minutes. Seems the best practice to check for a new version of the firmware, but I have not found a way to do this...

  This is not possible with SonicWALLs, because both the SonicWALLs running must be on the same firmware. Only way to do something like that, is to break the link HA and activate one of the SonicWALLs off and by default after the test.

  Thank you
  Ben D
  Reference Dell SonicWALL

• How to disable the automatic updates?  I tried asking chat support and I was told that it was impossible.  I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will not be able to work bet

  I tried asking chat support and I was told that it was impossible.  I need to disable the updates because my school disables updates on the first day of class, and if my updates at home I will be not able to do work between school and home

  You can install older versions if you use an older version.  but the newer versions (for example, cc 2015) can always post files to open in cc.

  If you want to save a file for cs6 install cs6 at home.

• When is the next update of the firmware

  When is the next update of the firmware?

  The only person who visits these boards who knows is not. All we know for sure is that we must get out before the end of the first quarter of this year, both at the end of March.

• When a photo has for example a bright sky beside the dark object, using lights and shadows can cause a 'halo' or double edge to appear. How can I avoid this?

  When a photo for example has a bright sky next to the dark object, using lights and shadows to reduce high contrast can cause a 'halo' or double-edge to appear. How can I avoid this?

  From my experience, this isn't a problem that has a simple solution, such as moving a slider or a combination of the sliders in LR. It requires rather a major change in the technique, at the unit or in office. Some pros (I am not one) tire ALWAYS support HDR or this reason - better transition from highlights to shadows, then tweak the image with much less "heavy" necessary. Another popular technique is the luminosity masking and blending in PS. There is a ton of information on this topic (just do a search on Youtube), but it's not easy to learn or do, but it can eliminate this problem.