Can I reset the update of the firmware on Qosmio G20?
I have a Qosmio G20 and I think that something was wrong when I updated the firmware.
Now, I have no operating system. Is it possible to reset the firmware?
Type of CD-rom is MATSU * A UJ-846-C
Hello!
Why you don t have an operating system if you have updated the firmware?
I'm a little confused on this, because the update of the firmware doesn t affect the HDD m functionality
That you get an error message before you try to start in Windows?
If not try to load the defaults in the BIOS as athan1001 said and please give us more details.
Good bye
Tags: Toshiba
Similar Questions
-
I can't reset the security questions. We received notice as below:
Hello world
I can't reset the security questions. We received notice as below:
"Cannot reset Security Questions."
We have insufficient information to reset your security questions. "
Please help me as soon as possible! Thank you very much.
Hello
You will need to contact the Apple Support.
The information is available here:
Contact Apple for assistance with the security of the Apple ID - Apple Support accounts
(I'm afraid that no one here can solve the problem for you - this is a user-based community).
-
НЕ МОГУ СБРОСИТЬ СЕКРЕТНЫЕ ВОПРОСЫ. ДЕЛАЮ ВСЕ ПО ИНСТРУКЦИИ В ИТОГЕ ВЫХОДИТ: 'НЕДОСТАТОЧНО ИНФОРМАЦИИ ДЛЯ СБРОСА КОНТРОЛЬНЫХ ВОПРОСОВ' КАРТОЧКА ПРИВЯЗАНА ДЕЛАЛ ПОКУПКИ. ПОМОГИТЕ МОГУ ПРЕДОСТАВИТЬ ВСЮ ИНФОРМАЦИЮ.
I can't reset the security questions. Do all that goes the instructions at the end: "not enough information to restore security" map is shopping. Help can provide all the information.
-СТРАНА УКРАИНА ПОЭТОМУ И НЕ МОГУ ОБРАТИТЬСЯ В ПОДДЕРЖКУ-
-LANDS OF UKRAINE AND CAN THEREFORE NOT APPLY TO THE SUPPORT.Did you follow this instruction? If you forgot your Apple ID - Apple Support security questions answered
-
Re: Satellite Pro L300 - how can I reset the BIOS password?
I put the password on the BIOS and electric start and I forgot the password.
How can I reset the password?I have a Toshiba Satellite Pro L300.
You must bring the laptop to an authorized service center to remove the password.
Which country are you? Check your local Toshiba Web site for a list of the ASP (service centres).
-
My iphone camera 6 + doesn't have an option to take direct pictures IE 3 small circles are missing. How can I reset the camera?
-
How can I reset the old my wife's phone so I can use it and she can not remember any password or ID
How can I reset the old my wife's phone so I can use it and she can not remember any password or ID
Here are instructions, but she will need to recover his password: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support
Help find the ID and the password: https://iforgot.apple.com/appleid#! & section = appleid
-
Some * changed my password to Icloud and lock my phone by finding my phone app
What should I do now, I can not activate my phone. My apple ID still works but not my Icloud how can I reset the password
-
Hello
The function of the program was to indicate the elapsed time. When the program has been run and the switch set to true, the indicator showed the elapsed time. And then move the button to false, the stop indicator to indicate the elapsed time. How can I reset the time elapsed to indicate the time elapsed since 0 when the button switch again without pressing the button "stop"? The program is attached. Thank you.
From your description, it seems that your code is way too complex. -What are you really trying to do?
-
How can I reset the time and date on Windows Vista?
How can I reset the time and date on Windows Vista
http://www.ehow.com/how_2056384_change-date-time-Windows-Vista.html
http://www.Vistax64.com/tutorials/114989-date-time-change.html
Read the information in one of the links above.
See you soon.
Mick Murphy - Microsoft partner
-
How can I reset the administrator user accounts?
My Windows 7 PC is now standard user. How I can change standard user to administrator. The system won't let me change. How can I reset the administrator user accounts? Or, how you're going to help me change the setting?
If you have AN administrator account on your computer then the answer of Joel help at all.
You cannot change a user account Standard on an admin on another account Admin account (AFAIK)
Try this:
Boot from your Windows repair disk (you DID make a?) and use system restore to set Windows to a point before it happened.
-
Can I reset the password for a member of the team as an administrator?
I can't find a place to reset the password for a member of the creative team cloud who is no longer employed by us. Can I reset the password as an administrator?
The reset password Email should be sent to the registered Email, so the rest of the password by you to another seat is not a viable solution.
However, you can revoke invite it & assign it to one of the existing employee.
To activate the headquarters, this Adobe ID must accept the invitation & then log out of the application of office of CC & journal again the new Adobe ID assigned.
Concerning
Baudier
-
8610 all-in-one printer: I can't download the firmware update to remove the dynamic security
"For not original hp ink users an update of the firmware option to remove the dynamic security is now available for select Officejet, Officejet Pro printers Officejet ProX."
I have bee patiently for the "fix". Following the posted signs: http://support.hp.com/us-en/document/c05308850?openCLC=true
Step 2) "click your HP printer model in the table below and run the file to update the firmware downloaded from your Internet browser."
Seems to have no option to run the download of my Internet browser.
I use Safari (and that's all I intend to help). When I click on the download, I get an error message that says: there is no application to open the file. I tried to right click 'open with' - any of these options are internet browsers.
Can you offer any help?
Hello
Option updte to remove the functionality of dynamic security listed in the document is only intended for a Windows PC.
Download and install the update by using the following link for Mac OS:
http://FTP.HP.com/pub/softlib/software13/printers/OJP8610_R1640B.dmg
Kind regards
Shlomi
-
Help - can't get the firmware to install WRT54GL ver 1.1
Hi everyone, I spent and openwrt 2.4 and now you want to put the linksys back on. I followed all the instructions and just can't get it to happen - what am I doing wrong
1. the unit is in safe mode - by pressing reset after power cycling the unit wait for the DMZ light press the reset button, the DMZ light is now flashing 3 times a sec
2. I can ping 192.168.1.1 I can telnet 192.168.1.1
3. I asked a technician online Tftp.exe as no download links I could find worked
4. that unity is a worm WRT54GL 1.1 I downloaded FW_WRT54GL_4.30.12.3_US_EN_code, 0.zip - which I confirmed with the tech online as being the firmware available only
5. I unzipped the firmware to 4 above
6. as reported by online technology took the network port on my laptop that is running Windows XP to 10 Mbps half duplex
7. have you opened Tftp.exe and putting 192.168.1.1 as a server, the password is the root password I put in openwrt and I selected the .bin for sync unziped file
8. the program says can not find server
Here, I'm to and are now totally stumped as to why it did not work.
I downloaded another program http://www.brothersoft.com/tftp-client-122473.html tftp
Try this software, I've learned an opcode not valid (2), which seems to indicate that she at least contact, but something is not right. Just for a test, I unplugged the modem and re - run the second program tftp and it cam back saying "no response from the server", confirmed by the first thought at least he did make contact. This second program has not anywhere where you can set a password. This program also installs a two command line option that I could not get to work
So I have the following questions
1. the use of telnet for the WRT I can confirm that tftp server is running
2. can I get like a tail-f on a log file in WRT so I can try and see where it is a failure
Other than that, can anyone add 2 c as to why it will now work for me
Hi everyone, I found a way to get the update to work. As long as you still have SSH access which is
1. with WRT mode normal ssh in to your openwrt
2. rename the .bin into something more small it IE firmware.bin and upload it to somewhere on the net it's easy access
3. in the ssh window cd /tmp/
4 wget http://domainname.com/firmware.bin
5. to make a writing /tmp/FW.bin linux mtd & restart I got this error
Trx bad header
If it is a firmware as well, as some of the
the original firmware files, use the following command to convert trx:
dd if = of = firmware.trx firmware.bin * beep * = 32 skip = 1
6. so I did what he told dd if = of = firmware.trx firmware.bin * beep * = 32 skip = 17. then go bat writing linux /tmp/firmware.trx & reboot
And it's not all good - what a relief
-
Can be upgraded the firmware on my Satellite Pro A120 to accept SDHC cards
I have a Satellite Pro A120 and use the slot for SD card frequently, however, the capacity of memory cards can sometimes be restrictive, is it possible to update the firmware for SDHC cards and if so, how.
Hello
Unfortunately not possible since it s card reader has NO firmware and it s a stand-alone device that has nothing to do with the BIOS (firmware) of the machine.
So, if she can't simply do not support. :/
See you soon
-
How can I reset the Setup/BIOS password?
Yesterday, I bought a used HP Pavilion a1640n Media Center Edition for my granddaughter. I wanted to go through the installation and make sure that everything has been updated and looked good but when I went into the Setup program it asked me password. The kid, I bought could not remember ever put a. It has been upgraded to Windows 7 - it works beautifully I might add - and somewhere along the way someone put a password during the installation.
How can I go on the erasure of the values as the BIOS password?
Thanks in advance,
Howard Woodard
Redmond, WA
Hello
To clear the Infromation in BIOS follow the steps below
- Turn off the computer and unplug the power cord.
- Locate the jumper marked CLEAR_PWD. (Normal) position, the rider is default on pins 2 and 3.
- Move the jumper on the CLEAR_PWD jumper to pins 1-2 to erase the password.
- Plug the power cord and turn on the computer.
- Hold down the F1 key during the boot process and enter the BIOS to change or clear the password.
- After changing or clear BIOS passwords, consider the jumper to reset the pins 2 and 3.
Maybe you are looking for
-
my mac book does not light and I get three beeps while it tries to start
my mac book does not light and I get three beeps while it tries to start
-
Save the Page (Ctrl + S) used to open a small window of the Explorer (Windows 7 OS). All of a sudden (after update for FireFox 37.0.1), it opens a window of browser enlarged (full screen). The passage of the mouse on the window edge, arrows a size ch
-
«I'm in Firefox 20.0.1 on a 660 s Dell Windows 7 Home Premium.» I downloaded and installed Firefox in May. I can't take it to 21,0 for the following reason: "Update available" window for Firefox 21.0 opens every day. I click on update Firefox and "Do
-
Re: Satellite L850 - starting with "no boot device - please reboot"
I tried to correct this L850 - portable 1LK which keeps crashing and so on. But while going through the options in advance in the troubleshooting section (Windows 8). I tried, I think its called Toshiba Recovery tool and click on the option to erase
-
Pavilion a6403w windows 7 ultimate 32 bit freezes during restart
Hello my pavilion a6403w intel dual 2160 cpu 1.80 ghz 1.80 ghz 4 GB ram with 32 bit windows7ultimate grip ot stop after reboot happens to the blue screen with the thing of 4 color box middle... only thing I find that I can do is stopped with the Towe