Update watch

Similar Questions

• Cannot update watch - for reasons that are LIES!

  I tried to update my watch for 3 days now, but I get the following:

  

  Problem is my watch has almost a charge 75%, his workload actively, and I'm close enough to take this picture:

  

  If you look at the ring of power it shows 75% of expenses and there was a Flash in the Middle, which indicates that the load.

  So the list of reasons my iPhone gives me to why I can not update it all are probably 100% FAKE!

  I have tried power cycling both the watch and phone several times.

  Does anyone have other ideas?

  Hello

  It can help to charge your watch while placing it on a flat surface, so that it is not in Mode bedside table.

• Update Watch said current 2.2 update. When the 2.2.1 is out

  My friend and I have the same Apple Watch, and it can update shows is 2.2.1 mine said: I'm on 2.2 with current update.

  Hello

  If you don't have yet does, first to update your iPhone to the latest version of the software (currently iOS 9.3.2):

  Update the software on your iPhone, iPad or iPod touch - Apple Support iOS

  If your iPhone is already running the latest version of the software, it can help to restart your iPhone and your watch:

  -Turn off the two devices together, and then restart your iPhone first.

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To reactivate: press and hold the side button until you see the Apple logo.

  Then proceed to the update of your watch:

  Update the software on your Apple Watch - Apple Support

• Impossible to update watch

  I bought a watch on eBay, the former owner has not extinguished obviously locking activation. When I try to turn it on, it says to update to the latest ios, then when I try to do what it the screen said, update checking and nothing else happens, it's been about three hours! Any ideas, anyone?

  Make sure your iPhone is connected to wi - fi and power and also make sure that the watch is turned. Cancel the update and agree when it says reset. Put the appliance back on again and try to pair it with your phone. He must check the update and move forward. I had a moment difficult Saturday morning with my new Apple Watch it to update. Seems to be a problem of wi - fi network. Do as I told mine to go. Make sure you have the latest iOS on your iPhone as well.

• How can I get my Apple Watch Sport update to watch OS 2.1?

  I have a Apple Watch Sport on watch OS 2.0.1 and I'm updating the watch OS 2.1. Whenever I try to download and install the update, I get a popup saying: "Impossible to check updated" "watch OS update could not be verified because you are not connected to the Internet."

  My iPhone more 6 is currently in the last update, iOS 9.2.1.

  I made sure that the Apple Watch is:

  • in the range of my iPhone connected to Wi - Fi
  • connected to its charger
  • at least 50% charged

  Because it did not work I tried to adjust the watch next to the phone, keep it on my wrist, restart both devices, and I even restored the two devices to factory settings once.

  Now, I know that the message said: it's because I'm not connected to the internet, but I assure you, I am. The rest of my House very much work and the phone and the watch can even make things with the connection to the internet. The speed of the internet home is also 100 MB download, is more than capable. I also tried several other connections wi - fi and turn off completely and try with LTE, even if it is said to use wi - fi.

  Please help if someone has an answer.

  Hello

  It can help to disable the twinning and re - pair your watch.

  The app shows on your iPhone shows backups automatically, including a new when the disparity with the app choose this option to restore the watch (backup restore) when provided the opportunity during the whole. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).

  - Pairing your Apple Watch and Support Apple - iPhone

  - Set up your Apple Watch - Apple Support

• Problem loading Apple Watch sport

  Hello everyone

  Since last week (after update watch OS) do not charge my Apple Watch sport

  more than a minute...

  After a minute, I get an error message saying that 'charge with. "

  This accessory is not supported"even I use the original White

  Magnetic charger and I've never had such an error before.

  I tried to disable the twinning and restart the watch it dosent help

  any suggestions?

  Thank you

  Hello

  Try charging your watch once again. In doing so, check that:

  • All the plastic film was removed from both ends and both sides of the cable support (consult closely on the head of the charger).

  

  • On the back of your watch and the head of the charge cable are clean and dry (clean with an abrasive, lint cloth).
  • The head of the load is properly aligned with the back of the watch, with the concave side / curve touch fully:
    • Some docks of watch, brackets, cases or protectors might hinder it. If you use one of these accessories, try to load the watch by plugging it directly into the charging cable, without using the.
  • If possible, test using a different Apple genuine magnetic Charging Cable (for example, by borrowing one from a friend).
  • If you reload your watch by plugging the cable into the socket:
    • Check that the magnetic charge cable Apple USB connector is fully engaged in the USB power adapter.
    • Check that the USB power adapter is fully committed in the socket.
    • Try to use different maps of the following:
      • Adapter USB Apple that was provided with the watch, or;
      • A 5W Apple (iPhone) or 12W (iPad) USB power adapter, or;
      • A third-party certified 5W (MFi) Apple USB power adapter.
    • Try using a different take (one that is known to work properly).
  • If no other suitable adapters are available, try to load by plugging the cable into a USB port.
    • If loading via a USB port on a computer, make sure that you use a USB 2.0 or 3.0 port, the computer remains turned on and awake, and the cable is plugged directly into the computer (not on, for example, an external keyboard).

  If you identify a problem with a particular component (adapter, cable, or watch) or the question otherwise persists, contact Apple support (mail service may be available) or make a Genius Bar reservation to have your products verified and, if recommended by Apple, served (either under warranty or through a service fee and out-of-warranty):

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

  To check your warranty status (the serial number is on the back of your watch):

  • https://checkcoverage.Apple.com/

  More information:

  Check your battery and load your Apple Watch - Apple Support

  If your Apple Watch does not load, or it lights - Apple supports

• Unable to update WatchOs 3

  Hi guys,.

  Since the official update is available for 3 WatchOs, I can't seem to do the update on my watch.

  I click on software update as you would, and it comes up with ' watch OS 3 - awaiting installation... ". »

  then click on install and enter my password,.

  THEN...

  It says "Unable to Install Update - an error has occurred in install the latest version of Watch OS on your Apple Watch".

  and just ask you to close the application.

  I updated my phone to iOS 10.

  Watch OS is currently in 2.2.1

  The phone and Apple Watch and iPhone are fully charged.

  Watch is on charge while I attempt it.

  I'm also on the wifi while I attempt it.

  Also, I tried to make a reset (when you hold the 2 buttons together) on the watch and the iPhone and STILL nothing!

  I don't really know why it does not work.

  I'm not a developer, so I have not installed betas, profiles or even jailbreaks. Just a standard user!

  SOMEONE PLEASE HELP! ....

  Thank you

  Swaad

  Hello iSwaad,

  Welcome to the communities of Apple Support!

  If you are unable to update watch OS 3, turn on the wireless router/modem to re-establish a connection to the internet.  Then follow the steps in the resource below.  I've highlighted the key here information.  Click on the link for more details.

  Update the software on your Apple Watch

  If you need help updating

  Try the following steps:

  1. Make sure your Apple Watch connects to its charger.
  2. Restart your Apple Watch. Hold down the side button until you see off the power, then drag the slider. To turn on your watch, press and hold the side button.
  3. Restart your iPhone matched. Press on and press and hold the sleep/wake button until the Red slider appears, and then drag the slider. To turn your iPhone, press and hold the sleep/wake button.
  4. Try to start updating again.

  If the update does not start, Open the Apple Watch app on your iPhone, tap on general > use > software update, and then delete the update file. After you delete the file, try to download and install new watch OS.

  Take care.

• If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  If I have the first generation iWatch I'll be able to get the update for new applications and look at faces?  I know that I couldn't display or the waterproof function to the water.

  Hello

  The next operating system update, watch OS 3, will be available for all Apple Watch models, including the first generation watches.

  We should go out on 13 September, after which it can be installed by following the steps detailed here:

  • Update the software on your Apple Watch - Apple Support

  More information:

  http://www.Apple.com/Watchos/

• Can not unlock Watch

  Just bought watch today.  Updated watch OS 2.1 and can not unlock look.  It says 'Device locked Unlock iPhone to use Apple Watch.'  My phone is not locked.  I never put a password on the watch.  I restarted the watch, it powered down and back up to anything will do.  Same thing with the phone.  Bluetooth of the phone is turned on and connected to the watch. Any suggestion would be appreciated.

  Hello

  Try to press the sleep/wake button on your iPhone to lock - and then unlock your iPhone by pressing the Home button and entering your password or contact ID.

  If this does not help, it can help to restart your iPhone and your watch in this way:

  -Put the two unit set off first;

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -Restart your iPhone before restarting your watch;

  -To turn back on your watch: press and hold the side button until you see the Apple logo.

• Musictitle no longer appears on watch

  Hello

  I've recently updated watch OS 2.1. (with an iPhone6 (9.2))

  Now it seems that I do not see the musictile of the song that I hear more. Also the control with play/pause/next/unfounded will not work.

  What I can do in the audit of STIs for the volume. In the application, I can browse my playlists and choose a title. But the "you listen" - part is not working properly.

  Greetings

  Hans-Christian

  Hi Hans Christian

  It can help to restart your iPhone and your watch. Turn on both devices off the power together first, and then restart your iPhone before restarting your watch:

  -To switch off your watch: press and hold the button side until you see the cursor off the power; slide it to turn off;

  -To switch on: press and hold the side button until you see the Apple logo.

• Problem with Windows Update!

  Hello!

  I have been using a computer HP (h8-1320eo) for about 11 months now, and I have a problem now.

  When Windows Update wants to install some updates, I let do and she successfully the download, but when he wants to set up updates, it freezes at 12%. First time I have let it run about 45-60 min, then forced to close. This happens every time, I shut down my computer.

  Initially, I contacted the Support of Mircosoft, nothing helps, I did some research and I found this discussion on a website (http://www.bleepingcomputer.com/forums/t/517267/sfc-will-not-complete-and-windows-update-gives-a-800...) And that sounds just like what's happening to me! And as I read down, I wasn't the only one, there are others, but they all HP computers.

  And that is why I contacted HP now, and sometimes the computer had some problems to open some files / or orders, for example "stop Installation" when I tried to stop Windows Update...

  Christian,

  I think that using a Restore Point to try and 'go back' is not enough to clear this error.

  It seems that there may be a recent problem with an update of Windows: KB2887069

  Reference Microsoft Forum: kb2887069 crashes at 12%

  You can try the following:

  • The system startup and logon
  • The Windows Updates Notify value (instead of automatic update)
  • Restart and sign (just because cela 'glue change', defines the kernel and make the computer happy)
  • Open windows updates
  • Look for the updates - which creates a list of the updates
  • Highest point and click right update KB2887069
  • Select this option to HIDE the update
  • Try to install the updates

  The same patch / update watch upwards in the list of Windows 8 update - it does not seem to cause problems.

  -----------------------------------------------------------------------------------------------------------------------------

  Reloading the image: use your most recent picture disc and recharge the system at this point.  Depending on when you created the Image, it's more or less painful. It will certainly take your system at this point in time, when everything worked.

  If you have never created a System Image, you can learn about it here:

  HP PC - creating and using a System Image to restore your computer (Windows 7) - c02053303

  -------------------------------------------------------------------------------------------------------------------------------

  If none of these suggestions work, then the underlying cause of your problem may be another that which has been previously documented.

  One thing you can try:

  Use the approach suggested above and hide the updates from one or more at a time, try to run the updates between selections.

  It is a painful process; It can help discover the question if KB2887069 does not cause any problems.

  ------------------------------------------------------------------------------------------------------------------------------

  Good luck!

• Vista: Configuration update

  Update watch "Configuration updated step 3 3 99% complete" then it stops. After the reboot, it shows "Configuration updated step 3 3 99% complete" then again. Tried pass mode without failure, update configuration begins again.

  KAP

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon.

  Mick Murphy - Microsoft partner

• KB954430 installed in 4 different locations in Windows 7 (64) even if Windows Update Failed. __

  I just got my computer updates 09/12/09 and installed.  I've looked everywhere and no one seems to be my problem.

  Update watch KB954430 failed, but it didn't.  I looked in Windows Explorer and what I found:

  1 c: Program Files (X 86) MSXML 4.0 file folder that is empty. Date 12/09

  MSXML4r.dll
  2 C:\Windows\winsxs\X86\_microsoft.msxml2r_6bd6b0abf345378f_4.1.1.0_none_3b5945b9da656e4d\msxml4r.dll file Ver: 4.10.9404.0; File name: MSXML 4.0 SP1. last updated on 12/09; 92.0kbs

  3 C\:Windows\SysWOW64;  Worm file: 4.10.9404.0; File name: MSXML 4.0 SP1. last updated on 23-07-09. 80.5kbs

  MSXML4.dll
  4. C:\Windows\winsxs\X86\_microsoft.msxml2_6bd6b0abf345378f_4.20.9876.0_none_ b7e610287b2b4ea5; Worm file: 4.20.9876.0File name: MSXML 4.0 SP2. last updated on 12/09; 1.28 MB

  5 C\:Windows\SysWOW64;  Worm file: 4.20.9876.0; File name: MSXML 4.0 SP2. last updated 07/21/09; 1.28 MB

  MSXML4a.dll
  6 C\:Windows\SysWOW64;  Worm file: 4.10.9404.0; File name: MSXML 4.0 SP1. last updated on 23-07-09. 43.5kbs

  7 C\:Windows\System32: MSXML3.dll. MSXML3r.dll; MSXML6.dll and MSXML6r.dll

  Is this good or I have to delete one of these?

  See the section "How to get help" of http://support.microsoft.com/kb/954430

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Error 0 x 80070002 - tried all suggestions still cannot update

  Computer update-watch the 0Xz8007002 error - tried all of the suggestions - does not always update

  Hello

  1. the Microsoft updates are getting failed?
  2 have. what proposals you tried?

  Method 1
  I suggest you try the steps from the following link:

  You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services
  http://support.Microsoft.com/kb/910336
  
  Method 2
  I suggest you to run the fixit from the following link:

  The problem with Microsoft Windows Update is not working
  http://support.Microsoft.com/mats/windows_update/

  Method 3
  I would say you can do clean boot and install the updates.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  
  Note: make sure you reset the computer back to normal once the diagnosis is complete.

• Widows vista SP1 installed watch, but still giving it to me as an unpdate, what should I do?

  I installed windows vista service pack 1 as an update, and when I check the history update watch installed and successful, but when I go to update the system still gives it to me as if it was not installed. I installed again and it shows successful, but then give it to me as a new unpgrade. For me, it seems that is not installed. What can I do? I need to renew to get Service Pack 2 to be able to install Internet explorer 9. Thank you!

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you if SP1 is installed or not.

  If this isn't the case, then choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  And if you have any problems:

  There is a Forum that Microsoft has put in place for problems with Vista Service Packs. If repost you the Forum they will definitely try to help you here...

  http://social.technet.Microsoft.com/forums/en/itprovistasp/threads

  See you soon.