Update Win 7 to win 10 error

Similar Questions

• The error code automatic updates - Win XP Pro SP3 - 126 and 8007041 D

  I just got rid of a trojan/virus.  I'm clean now.  But WU has been broken in this clean-up operation.  Here's what I've done so far:

  1. I'm in Services.msc try to start the automatic updates service.  It returns an error code 126 - the specified module could not be found.
  2. Try to update via the Win Update Web site gives a 8007041D error.  BITS is running.
  3. I find a sequence of several - staggered for re-registration of components to WU.  Attempt to regsvr32 mshtm.dll, that fails with mshtml.dll was loaded, but the DllRegisterServer entry point was not found.  The file cannot be saved.

  I hope someone here can point me in some direction that everything I've tried so far heading an impasse.

  Thank you.

  H

  [1] q: A Norton free trial or a test of free McAfee [a] came pre-installed on your computer when you bought it? (No matter if you have never used or activated).
  A: No....

  [2] ... I notice Explorer (not IE) runs very slowly.

  A1. Did you do a clean install of Windows XP or Windows XP was preinstalled by the OEM when you purchased the computer?

  A2. How did you determine that Windows Explorer [EXPLORER. [EXE] "running very slowly?  It was sudden, new behavior or...?

  3. when (exact date) has been Updated for Windows XP (KB971029) installed in Add/Remove programs?

  4. is Firefox, Chrome or any other alternative browser installed?

  5. have you already had the opportunity to do a Repair Installation or a clean installation of Windows XP for some reason any?

  6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; Advanced SystemCare. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; CCleaner)?

  [note2self:FixIt & SScan]

• I received the error code 80070670 when updating Win Defender 4 days. However, today the last definition is successfully installed. Do I still need to try and install the prior definition?

  10/19, I got the 80070670 error code when you try to update Win Defender with the 1.139.124.0 definition.

  However, today, 10/23, definition 1.139.382.0 successfully installed.

  Do I still need to try and install the prior definition or the definition includes a prerequisite?

  Do I still need to try and install the prior definition or the definition includes a prerequisite?

  N °

  UTC/GMT is 23:20 on Tuesday, October 23, 2012

• Try to install the update for win 7 error code windows service install could not be accessed

  I can't indtall a program

  Try to install the update for win 7 error code windows service install could not be accessed.  Insatller Windows is not installed correctly.

  Try to make sure that the Windows Installer service is running, or force start it.

  1 open run and type services.msc, and then press ENTER. You can also go
  to the Panel of control-> Administrator Tools-> Services.

  2. in the installation list services, locate Windows Installer.

  3. check that the status is started. If the condition column is empty,
  Right-click Windows Installer, and then select start.

  4. If you get the error trying to force starts the Windows Installer service,
  try to change the Startup Type to automatic (default is Manual), then
  Restart the computer.

  You can also give the following a try, make sure that you back up your Windows registry database before you try:

  7 How do I backup the registry in Windows

  http://blog.thinksharp.nl/2009/03/08/WindowsInstallerHELLOnVistaX64PlatformsAlsoFixesITunesInstallProblem.aspx Change of the

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\MSIServer\WOW64 key from 1 to 0 got my install iTunes work.

• important update KB947821, not proposed as important update, win 7 64-bit home premium

  Original title: important update, not proposed as important update, win 7 64-bit home premium

  I recently reinstalled win 7 64B Home premium, chose install important updates only, 25/01/2011... Since that time constant errors and critical errors appeared, and then this morning I missed connection then crash BSOD, error code, so I end up finding a lack important update called KB947821, why I asked does not have this facility as an important update as everything else on 01/25/2011? I only buy win7 in June

  Hello, MatchWhat

  Are you always problems with your computer or run the system update readiness tool solves the problem?

  KB947821 is the tool of the system update, this isn't an update, it rather is a tool that will scan and fix of inconsistencies that may prevent the updates install correctly.

  Since it is a tool, it is not available through Windows updates and you will be asked to download and run it manually if you encounter any problems.

  Also know that the excessive profanity on the forum Microsoft violates theCode of conduct . Please read the document and comply with its policies. We have changed your message, but be aware that you may be forbidden to publish in all instances of Microsoft if violation continues. Thank you for your cooperation.

  David
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Update win/xp family (KB8982670) does not completely load

  last update 03/04/12 to my PC. NTFramework 3.5 S(P 1 update) Win Server 2003 a Win XP X 86... repeatedly failed. what I'll do... .This is considered a critical update.

  Go to windows update, let it check for updates and see if this update is required.

  Also in the history of update of the review, you can see the updates failed.

  You can click the icon has failed and a box will come up with the error.

  Post here with the error and whether or not this update is always necessary. I checked with the Microsoft update catalog, and I can't find a list for this update.

• I'm updating win 7 to win 10 and I have only 7.87 GB remaining in 29 GB C drive. It is complete or not?

  I'm updating win 7 to win 10 and I have only 7.87 GB remaining in 29 GB C drive. It is complete or not?

  only 17% is done. It will display an error or can I continue to update?

  You need a minimum of 10 GB.

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  How to back up and restore your files manually

  How to free up disk space in Windows

  • How to: 10 tips before installing Windows 10
  • How to: determine if a device application or hardware is compatible with Windows 10
  • Will remain the documents and applications, or install app must

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Win 7 Error Message 802400B installation failed KB3079757

  Hello

  I have a problem with the 802400B error that I receive with a vain attempt to install KB 3079757 via Windows Update. Now I can't get other updates - it simply repeat the download of updates, but never does. I had about 20 important updates - it installed about 5 and then hooked to it. I had just finished update of IE to V11 and worked well, then 3 updates were installed with the failure error message. After that, I got 2 others to install - they seemed to be already downloaded and just need to be installed. After that - neither works.

  Tried the tool update recovery/repair (?) - who also would not be finished. Then he went to its audit process was "fix" the problem but didn't finish.

  I am running Win 7 on a 64-bit computer. A lot of disk space, RAM etc.

  Download the updates manually and their installation and reboot then solve this? Or another idea?

  Thank you!

  LH

  Welcome & thank you for your comments. Mark one or more of my previous posts as RESPONSE will officially close your thread.

  

• Satellite Z30 - A PT248E-01801JH2 impossible to update win 10 to "birthdays".

  When you try to update win 10 worm 1607 (birthday) the update stops saying this update could not continue as it was impossible to access the reserved partition.
  Microsoft support abandoned and proposed a new installation which I try to avoid
  What is the solution?
  .
  SSD details (disk management):
  Model SAMSUNG MZMTD512HAGL-00004
  Size 476,94 GB (512,105,932,800 bytes)
  recovery partition - 1.00 GB
  EFI system partition - 100 MB
  recovery partition - 450 MB
  recovery partition - 450 MB
  recovery partition - 10.04 GB
  OEM - 8.00 GB partition
  E: partition - GB 146,48
  D: partition - 81,80 GB
  C: partition - 228,51 GB
  .
  OS: windows version 10.0.10586 develop 10586.

  I solved it by enlarging the EFI to 85 GB system partition.
  I think it's too much and I'll look into it and reduce it some time in the future.

• I get a "not an application valid win 32 error" when I try to download and run a program

  Original title: win 32 error

  When I dounload one program and try to run it I get one is not a valid win32 application error. This happens on more than 1 program how to fix this?

  Hello

  ·         What program are you trying to install?

  ·         The program is compatible with Windows XP?

  ·         Since when are you facing this problem?

  ·         What web browser do you use to download a file?

  I suggest to delete temporary internet files from your computer, and then try to download the program, save it in a different location and try to install it from there.

   

  Get the error: not a valid 32-bit application can have several origins:

  I have listed some of them below.

  The file is corrupted, bad or missing.
  (a) if the hard drive is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.

  (b) If you are running the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:

  
  (a) If you try to run a program that is not designed for your version of Windows, you can get this error.

  (b) Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.

  (c) if the program is an MS-DOS program more former start program or Windows, you can get this error.

  (d) if the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.

  
  (a) this error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.

  (b) if the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.

  one) If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or drivers that are not compatible with Windows.

  (b) download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Follow these steps and check if that helps:

  Step 1:

  I suggest you to download and run the latest Microsoft security on your computer Scanner and check if it helps:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

   

  Step 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

   

  Problems installing and uninstalling programs on Windows computers

  http://support.Microsoft.com/kb/2438651

• Win Vista error when the computer is open

  I've been surfing this site looking for an answer of the following error messages when I open the computer Application: open them all at the same time.

  1 could not start the dispatch table, win vista error

  2-cannot create TransportManagerServ: create

  3 - the third is a dialog box with the title: error SDMan WinMain. It says: an instance already exists! -OK

  Can someone give me a hand? Thank you

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  Also, try the following:

  1. click on start, type msconfig in the search box and press ENTER.
  User account control permission
  If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
  2. in the general tab, click Selective startup.
  3. under Selective startup, clear the check box load startup items.
  4. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
  5. click on OK.
  6. When you are prompted, click on restart.
  7. after the computer starts, check if the problem is resolved.

  Andre Da Costa http://adacosta.spaces.live.com | http://www.ActiveWin.com | Microsoft MVP

• I have win 7 and I can't update win 10 due to the too small system partition. I have only 2.98 gb

  I have win 7 and could ' t update win 10 due to the too small system partition

  The above is a statement. Do you have a question?

• Is the latest version of PS CC backup files when the computer is hardbooted? Just try to know if occult Microsoft my computer so that he could perform an update (Win 10 of course)

  Just try to know if occult Microsoft my computer so that he could perform an update (Win 10 of course)

  I got the 4 files to open, air conditioned and have several changes and was going to save all changes when my screen went black. I had to hard - boot the computer.

  After doing Windows 10 made updates and the computer restarted with the PS and the 4 unsaved picture. When I went to save the file name

  had the word 'restored' added to it.

  If you have documents open in Photoshop and changes.  If you have your photoshop preferences file manages the automatic backup settings. Each automatic backup recovery period a recovery file must be written for these documents.  If your Machine is blocking you the original files of documents, either still on you computer unchanged if you have not any saved on them.  When you open Photoshop, it should see recovering files it save on your documents. These recovery files will all have the update you do to your documents and writings in recovery files. However, any changes made after this last period of auto backup is not there.  You lose these updates and all the States in the history of Photoshop that existed prior to the accident.  Photoshop automatically opens all files in recovery, so you can get as much work as you can.   When you save them and close documents or close without saving the document recovery files are deleted.  Normally when you close Photoshop there are no open documents and therefore no recovery file.

  Windows Update not mess with the application files or applications.  It is always better not to run applications when windows update is running.

  

• Portege R830/PT321E: update the Bios stops with "year error occurred while...» »

  Portege R830/PT321E: update Bios end with ' year error occurred while preparing the environment of update...» »

  Following message appears first

  BIOS version: Worm. current 3.40-> update version 3.70
  THIS Version: worm. current 1.30-> update version 1.50
  BIOS and THIS should be updated

  During BIOS update seems following message:

  + An error occurred during the preparation of the updated environment. You have not given permission to run the update. +

  My settings:
  -BitLocker is turned off.
  -No connection to a docking station
  -Windows 7 is installed
  -Boot mode is enabled? I guess that means:
  "Close all open programs, shut down windows and then turns off your computer."

  Any idea what is the problem?

  Post edited by: ML

  Hi ML

  Stupid question maybe now but why do you want to update the BIOS on this, I think, fairly new laptop model?
  Have you noticed a few issues or hardware issues?

• HP Pavilion m6-1045dx: update the bios y dios UN error

  Update the bios y dio UN error desde the pagina driver busque bios desde php the instale y y is reinicio pc sola y is quedo pantalla negra pero el equipo lights are una portatil HP Pavilion m6-1045dx

  Ayuda than devo hacer para las dress bios?

  @David- 100

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  
  Spanish: Foro of HP users
  
  French: Forum users
  
  Portuguese: Forum back HP users
  
  Chinese: 惠普个人客户支持论坛
  
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• Windows updates continue to fail. : update for windows vista (KB2378111) security error code: 800719E4

  In particular windows security updates for example updating security for windows vista (KB2378111) error code: 800719E4. With a lot more updates, they continue to fail, but only a couple succeed. When starting my computer in general goes to screen installation of updates. He finished going through step 1 and 2, but never seems to complete step 3 and remains on full where for at least 5 minutes. Then shows that updates were not properly before. Restoration of the changes. This continues to happen frequently now, and after having tried to restart my computer or install a little at a time still does not solve the problem. Also, I tried to use the troubleshooting solutions but did not have much. Don't know what else to do?

  My laptop runs Windows Vista Home premium: service pack 1: 32-bit operating system type.

  0X800719E4 ERROR_LOG_FULL
  The log space is exhausted.

  Transaction for Windows Update logs may be in an inconsistent state.
  You can delete them by clicking the ORB start.
  In the search for cmd field type
  Right click on cmd.exe and select 'run as administrator '. Accept the UAC prompt.

  At the prompt, type in the below exactly as written, including spaces, pushing enter after each command

  CD /d %SystemRoot%\System32\SMI\Store\Machine
  attrib s h *.
  del *.blf
  del * .regtrans-ms
  output

  Restart the computer now and see if it can be updated.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN