Update Windows 10 lost after renewal of HARD drive

Similar Questions

• Windows 8 license after replacing the HARD drive

  Original title: change of equipment (HARD drive)

  Good night, I have a computer laptop windows 8 and I fear that the HARD drive (malfunction) he'll need replacement.

  My question is, what will happen to my windows 8 license, once my current HARD drive stop working (because the key is encrypted in the bios)?  
  Please note that in the country where I live customer support is, at best, ineffective, so personal attention is not an option.
  Thank you before hand.
  Send you my best regards.

  Hi, Caesar,

  Activation pairs your product key in your hardware configuration and helps to verify that your copy of Windows is not been used on more computers than to allow the 3668Microsoft Software License Terms.

  If you change the hardware on your PC, you must contact support to activate Windows by phone.

  As you have decided to replace the hard drive, you could face an activation/Windows not genuine error.  You can follow these steps to make a phone activation.

  a. press Windows key + X , then click run, then type: slui.exe 4

  b. press the ENTER key

  c. Select your country from the list.

  d. choose telephone activation .

  e. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  f. explain your problem to the support person

  See the article:
  How to activate a Microsoft product using Microsoft Product Activation Center

  http://support.Microsoft.com/kb/950929/en-us

  In addition, refer to this topic:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-windows_install/hardware-changes-no-more-activations-available/ed283ad6-D462-478f-a1a0-8922226ce82b

  Hope this information helps.  If you have any other questions, we would be happy to help you.

• Can not recover the Windows 7 desktop after replacing the hard drive

  I bought a new HP Pavillion Elite (HPE-240f) in August 2010. A week ago my hard drive has no SMART short self-test during systematic hardware diagnostics. I installed a new hard drive of the same size - 1 TB and could never make it work properly. I tried the following (in that order).

  1. using a system repair disc, I got the system from a previous image (which I did shortly after the purchase, install my own software and configuration of all). It worked, but then I noticed that Windows Update was not working. I ran various Microsoft diagnostic tools and discovered that some (unspecified) system files have been damaged or missing. All the fixes I tried didn't work. I ran hardware diagnostics extended, but no problem not found.

  2. I tried to restore the system to the default settings by using the original image on the D partition. At first it seemed to work, but at the last moment when the system started, I saw a message on the screen that Setup is starting services and then got a warning saying that services failed because of (unspecified) problems with hardware.

  3. I tried to restore the system from the system recovery discs and a message "system recovery disks do not support this computer."

  4. I found this Cyberlink utility on the HP website, dealing with precisely this issue. I created a CD tried and it didn't work.

  5. I found this document on the HP Web site, saying that if you are replacing a hard drive with sectors of 512 bytes with a new advanced Format (AF) drive (with areas of 4 096 bytes) and your system was manufactured before October 2010 (as mine was), you must get the new HP recovery disks. I thought I finally found the root of my problems (since the new drive is indeed AF and the old man is not) and ordered HP recovery discs.

  6. the disks arrived today, and I noticed that the version number of the software (for Windows 7 version) is almost the same as on the computer, except that the last digit is 9 on disks and 6 on the computer - I guess it's an update to deal with the problem hard drive AF. However, I get 'system recovery disks do not support this computer' error, if I use the utility from CyberLink recovery disks or not. To be on the safe side, I even used a new hard disc (new 1 TB) right out of the box (never partioned and installed previously) and connected the original keyboard supplied with the computer (I also unplugged everything except the monitor, keyboard and mouse). However, I get the same message. Just out of curiosity I tried to put back the original hard drive (certainly not in best shape, even if the system always starts with him) and still could not recover the system.

  What else can I try?

  Any help will be greatly appreciated.

  An alternative to try. > If you can read the Microsoft Windows 7 of 25-character license key attached to the Tower, you can download a Windows 7 ISO file to burn to a DVD. The version must match that on the sticker COST Microsoft. for example Home Premium

   

• Reinstall Windows Media Center under Windows 7 Ultimate after the new hard drive, installed using Microsft Windows 7 disc

  I had the misfortune I had to replace my hard drive on my Toshiba laptop after reinstalling my Windows 7 Ultimate disc, I find that I am unable

  load the Windows Media Center software. When I click on the location of the file, some files are visible, but it does not load.

  Can I use the disk window to replace or repair the Windows Media Center files without causing other problems?

  Don Winston Hills NSW Australia

  Open your Start menu by pressing the Windows key and type FEATURES in the search box. Select 'Windows turn features on or off ". When the Panel opens, expand the category "Media Features" and place a check in the box "Windows Media Center". You may need to restart after Windows reconfigures itself.

• Pavilion g6 after renewal of hard drive recovery

  Have run tests of development with the new hard drive mounted and all this past.

  Have 4 HP recovery disks.  1of3 disc ok it 2de3 freezes at 73% full and gives the failure message. Press ok to try again just drops the message.

  Is this a problem with the recovery discs?

  They recover backup on external hard drive with USB connection, it is possible to recharge directly from this?

  Hello

  Do you still have the original hard drive? It still works?

  N ° you can not recover with the backup on external drive.

  Are - what you happened to clone the recovery on the external drive partition?

  Best regards

  ERICO

• HP Pavilion 17-e119wm: reinstall Windows 10 operating system after replacing the hard drive

  Hello, I bought a laptop HP Pavilion year last for work or school. He perfectly managed until yesterday when it was freezing to close unexpectedly. Waited about half an hour to see if it would work himself, I had several programs running at the same time. With no results, I did a hard shut down and left for about two hours. Trying to turn it back on, I was stuck on the HP Home screen for almost an hour. I turned off the and tried again. Sometimes I would be stuck on the startup screen, and sometimes he would show that he was about to auto repair, then the screen turns off. In addition, the recovery menu of the system through the F11 key did not work, so I did a Quick Test of system and received a short Drive DST hard failure.
  
  I plan to buy a replacement HGST 5 K 1000 1 TB hard Drive from the manufacturer; However, my warranty expired last month, and I'm not sure how to reinstall the OS (installed with Windows 8.1 then upgraded to Windows 10 factory), once the new hard drive in place.
  
  I've never done a HP system recovery Image, and I'm low on funds, so I'm not able to contact HP directly. Help, please. I am a student and I work from home, so I am at a loss without my system.

  If you want to reinstall Windows 10, then this is the part the more easy and free.  I understand, completed after the upgrade to Windows 10, then you can clean install Windows 10 site M$.

  On a work computer, go to the WINDOWS 10 DOWNLOAD, scroll down to the purple 'Download tool now 64 Bit' click that to let do its thing.  On the next screen, choose 'Create the installation media for another PC', then what kind of media you want to use DVD or USB flash.  Once created, install Windows 10 on the PC in question - when everything that fact it is activated.

• Tecra S11 - How to reinstall Windows 7 after upgrading the HARD drive?

  How to reinstall Windows 7 pro after an upgrade to 500 GB HARD drive? How to access password protected data after relocation? How can I get a professional installation of Windows 7 DVD?

  (I do not installed new HARD drive yet, but I intend)

  Hey Buddy,

  You have created the Toshiba Recovery disk? Perfect!
  After Exchange of HARD drive, you need this you to install Windows 7 disc. The Toshiba Recovery disk contains an image of the factory settings, which means that you will have the factory settings on the new HARD drive after the use of the disc. You must boot from it and follow the instructions on the screen.

  > How to access password protected data after relocation?
  It would be interesting to know what data you mean exactly.
  Before you reinstall Windows, you must back up all data on a disk for example external HARD.

• How can I prevent Windows Update to write data to my external HARD drive

  I have Windows XP running on a controller NI PXI-8106. On this same controller, I have two mapped drives.
  1 C drive where Windows is installed
  2-external SATA drive mounted in RAID0 used to save sensitive data in our application.

  We discovered that Windows update has written files to disk external DRIVE instead of the local drive as we would expected. What could I do to prevent this. It is very important for us, given that the RAID0 data should not be upset by any means. We cannot update Windows to write outside of the C: drive.

  I look on various forums and it seems that I'm not the only one in this situation where Windows Update writes data to an external HARD drive, but I have not seen anywhere a solution to avoid this, in addition to unmaping the drive.

  During the installation of updates, Windows Update downloads the installers (only) for updates to the drive with free space available. You can either disconnect the external drive when you need and/or free up space on, for example, your boot drive.

  See http://support.microsoft.com/kb/956324 or this discussion: http://aumha.net/viewtopic.php?f=62&t=33827

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• How can I remove old updates from windows to prevent their fill my hard drive?

  How can I remove old updates from windows to prevent their fill my hard drive?

  You don't want to. Otherwise, why would have installed their in the first place? They are updated for security. Thema alone.

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. There is no error code displayed

  Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.

  Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?

  Hello

  Check your level of service current pack...

  • Hold down the Windows (between Ctrl and Alt) key and press Pause break
  • Examine what is listed in the system: section

  If there is no service pack designated first level you must download SP2 from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28

  .. .and then run the downloaded program to install SP2.

  Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24

  For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.

  So try and get up-to-date with the Windows updates.

  Tricky

• Activation of Windows Vista after replacing the hard drive

  I'm unable to activate windows after having my hard drive replaced. The portable station to my Windows Vista Home installed school, when my computer was originally Windows Vista Business. When I try to use Windows Activation, all options tells me that my product key is not valid for Windows Vista Home Edition. However, the steps to find a phone number to call for the activation require me to enter a product key, and then find the phone number from there. Because I can not clear the checkpoint, I can activate Windows or find a phone number to call. My computer has been purchased through my school, so I don't have a Windows Vista Business install disc, it automatically installs through the recovery disks. I could back up everything and then use the recovery disks, but I was wondering if there was another way to use the product key, I have, or to communicate with Windows. Any help would be greatly appreciated. Thank you!

  Hello

  the product key you have is for Vista Business, not the House

  without a product key for home which must be provided by your school or purchased by you (no longer sold) will not be activated

  as you bought the computer and operating through your school system, these are the people to talk about this

  and if they provided you with recovery disks when you bought originally, they are used to boot from to reinstall the original operating system

• When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  * Original Title: windows update

  When you try to install the update to upgrade windows 7 pro for windows ' 0 pro update windows seems even after 5-10 min in a loop with no sign of progress.

  If anyone has any ideas on how it can be fixed please tell me

  Adam

  Please run the Windows Update Troubleshooter:
  http://go.Microsoft.com/?linkid=9830262

  Please provide the exact details of any problem it reports as not fixed.

• How can I reinstall windows 7 after replacing the hard drive?

  How can I reinstall windows 7 after replacing the hard drive? do I have to call microsoft or I can retrieve it somehow to the old hard drive?

  Well, that certainly puts a different point of view on this subject.

  There are data recovery services that can recover data from disks that have suffered from various types of failures. However, they are quite expensive. Unless the data is particularly useful, it is generally not useful.

  If your Windows 7 is an OEM version, installed on the computer when you bought it, the manufacturer could have a recovery disk on sale. If it was a retail copy and you always have the appropriate product/serial number, you can get a DVD of their team of parts replacement.

  http://support.Microsoft.com/kb/326246

  Tom Ferguson

• Activate Windows 7 using the same product key after changing the hard drive.

  Original title: activate windows 7.

  Before that I put a new hard drive, should I the new product key or the same product key?

  Did you follow this advice?

  If it requires no Activation phone after replacing the hard drive, do not follow request to Auto, but brace yourself for a real person explain as to what has been done for purposes of re-setup

  "How to activate Windows 7 by phone '

  http://www.SevenForums.com/tutorials/18715-activate-Windows-7-phone.html