Updated screen as data is retrieved

Similar Questions

• How can I prevent the annoying "Hooray!" "Your Firefox is updated" screen/tab to appear whenever I start Firefox?

  Whenever I start Firefox the boring "Hooray!" "Your Firefox is updated" screen/tab is displayed. I know that it is up-to-date. How can I stop this?

  Hi STALMIKI,

  You should look at this article on this specific issue and Preferences not savedarticle. It should give you all the information you need!

  If this does not work:

  1. Enter about: config in the address bar
  2. Click I'll be careful, I promise you if prompted
  3. In the filter field, type Startup
  4. Double click on startup.homepage_override_url
  5. Delete the text string, and then click OK
  6. Close Firefox and reopen the window to check that it worked.

  Hope this helps!

• B1 - 710 stuck on the screen 'formatting data"after trying to do a factory reset.

  After occassionly gel to start the past two weeks, causing necessary reboots, the tablet in a loop start.  The last time this happened, about a year, a factory reset solved the problem. This time, however, the Tablet is stuck on the screen layout of the data. Now, even holding the volume up button and the power button on the system goes back to the screen set data formatting and nothing else happens.

  Is it possible to retrieve the tablet or is - this one probably a hardware problem?

  It seems a hardware problem, to be honest, but may also be a corruption of OS/recovery if you are still under warranty, support Acer a call.

• Need help on the essential "UPDATE" of the data in the table...

  Dear experts,
  
  Need Advice...
  
  I have one table in which i have 200,000 records, now in this table for each record i have to update quantity figures...
  
  To perform such bulk update i am using the following method...
  
  *1. At first i create TYPE*
  
       CREATE OR REPLACE TYPE T_OBJ_GET_QTY (--);
  
  *2. Create TYPE as table of object created in step 1*
   
       CREATE OR REPLACE TYPE T_GET_TEST_QTY 
       AS TABLE OF T_OBJ_GET_QTY; 
  
  *3. assign object type to the variable*
  
       p_get_test_qty T_GET_TEST_QTY; (Created in step 2).
  
  *4. now i write the cursor using type created in step 1...*
  
        cursor c_upd_qty as
         select T_OBJ_GET_QTY( col1, col2)
         from v_view;
  
  *5. open cursor and fetch into variable created in step 3...*
        
         open c_upd_qty;
         loop
             fetch bulk collect into  p_get_test_qty limit 1000;
             --perfom update now..
               forall rec_upd_qty in 1..p_get_test_qty.count
                   update table t1 
                   set c1 = treat(p_get_test_qty(rec_upd_qty) as T_OBJ_GET_QTY).c1
  
                  exit when notfound;
      end loop;
      close c1;
  
  
  Kindly let me if this correct way to perform bulk update of the data, or is there any better way to do so...
  Please share your inputs...
  
  I hope i am clear in asking my question
  
  Regards
  nic

  Published by: W Nicloei on May 27, 2011 01:10
  
  Published by: W Nicloei on May 27, 2011 01:36
  
  Published by: W Nicloei on May 27, 2011 01:45

  Ahh, ok.

  And a row of the view corresponds to a line in the table that you want to update?
  I guess that your update statement would have a WHERE clause identifies the row to be updated, right?

  If so, why not "merge" the view in the table, using the MERGE Oracle statement?

  Something like:

  MERGE
       INTO  target_table tgt
       USING source_view vw
       ON  ( vw.key-column(s) = tgt.key-column(s) )
    WHEN MATCHED
    THEN
       UPDATE
       SET   tgt.c1 = vw.c1
  /
  

  I still don't see why you would need a pl/sql program that retrieves all rows from the database in memory program and then writes all back in the database.

• How can I update the expiration date on my credit card account?

  How can I update the expiration date on my credit card account?

  How can I update the expiration date on my credit card account?

  Go to your Bank and get a new card.

• Planted in the middle of the intallation: "could not update the registry data.

  My hard drive was a hardware malfunction and had to be replaced altogether. I just got my new hard drive, and after fit, he tried to install vista Home premium 32B, that came with my dell inspiron 530 computer. About 10 minutes after the installation a message announcing that "windows could not update the registry data" and "installation has been cancelled. This was repeated several times. Any ideas why and how to solve?
  Thank you.

  HI -.
  Other people who have had this problem report that choose NOT to do the updates during installation allows you to install finish. They are then installing updates once the installation is complete. You see an option to install no updatesa as part of the installation? Barb winter
  Program Manager of Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.

  * Original title: look for the updates ms7

  My update screen shows the last control updates has been 14.6.16 to the 08.01 and the update to install has been KB3035583 on 25.5.16 to 23.02.  Since 14 June I repeatedly ran checks the updates, but these controls are never successful as never - end research I just saw the "check updates" message, but the check never ends.   Why is this?

  The Windows Update client cannot manage a KB3161664. Download and install it manually in advance. Links provided here:

  http://Wu.krelay.de/en/

  Be sure to not do a search running in background.

  Best regards, VZ

• BlackBerry Z30 Z30 suspended in the "Additional update" screen, I have a spleen?

  After many hours being pasted on the screen "Software updates", things have finally moved on the "Additional update" screen.  I am connected via Wi - Fi and have not inserted my SIM card.

  He's been stuck here for 3 hours, is this normal or is my phone a dud?

  The wise thing to do would have been to plug and leave it.

  See what others say. I still think that you need the mobile network and the installed SIM. You should leave wifi on as well.

• Update screen from a Thread.

  Hello

  is it possible to update the current screen of a Thread?

  I tried with a pushScreen but thit causes the termination of the Thread...

  I also tried a second Thread that reads the information in the first Threads

  Output array, but it worked...

  creation of the "screen" with smth like that

  while ThredIsBusy == true{
    //Update Gui
  }
  

  does not work too...

  the Thread takes about 1 Minute, if I want to display information

  on the progress in the graphical interface.

  Any ideas?

  dognose

  well, I was able to produce a solution of 'work '. I don't know if its good or bad, but it works:

  First of all, with beginning of thread, I show the status screen once and start the update screen Thread "wait."

  /*This is the Thread taking a time*/
  GlobalDataStore.AllTracks.start();
  
  /*This is the boolean we use later*/
  GlobalDataStore.ThreadIsRunning = true;
  
  /*Display a instance of "waiting Screen"*/
  Screen waiting = new waitPlayListScreen();
  UiApplication.getUiApplication().pushScreen(waiting);
  
  /*Start the second Thread, that updates the "Waiting Screen"*/
  GlobalDataStore.Waiter.start();
  

  It's Source code, I used for my "screen pending update.

  public void run() {
         /*This is the boolean set on thread start*/       /*While, cause it should stop, when Thread 1 is finished*/       /*Thread 1 sets the boolean flag on false at end*/
         while (GlobalDataStore.ThreadIsRunning == true){            UiApplication.getUiApplication().invokeAndWait(new Runnable(){
                  public void run(){           /*Close "current wait Screen"*/
                      Screen sr = UiApplication.getUiApplication().getActiveScreen();
                      sr.close();
  
           /*And push new one. Information is update by functions that are called             in the constructor of the waitscreen*/
                      UiApplication.getUiApplication().pushScreen(new waitPlayListScreen());
  
                  }});
              try {
                  Thread.sleep(1000);
              }
              catch (InterruptedException ioe) {
                  GlobalDataStore.EventLog.Append("Exception While Thread Sleeping: " + ioe.getMessage()); //log
              }
          }
      }
  

• My keyboard is missing after update screen.

  My keyboard is missing after update screen. It comes when I do the system restore, but disappears again when I turn on the computer and it will update again.

  11 updates have been installed. I couldn't find 10.

  Adobe Reader XI (11.0.10)
  Update for Microsoft Windows (KB3014406)
  Update of security for Microsoft Windows (KB3013126)
  Hotfix for Microsoft Windows (KB3009736)
  Update of security for Microsoft Windows (KB3008923)
  Update for Microsoft Windows (KB3014394)
  Update for Microsoft Windows (KB2952664)
  Update for Microsoft Windows (KB3006121)
  Update for Microsoft Windows (KB3006625)
  Update for Microsoft Windows (KB3013410)

  Notice that I get:

  

  

  How can I get the keyboard screen on back?

  Remove KB3004394 from Windows updates and reboot. It has caused many problems.
   
  Go to the updates of Windows. It should appear in the start menu. All programs, or you can find it in the control panel.
   
  Click view update history and installed updates. In the search bar type in KB3004394. When it shows the update, do a right click on it and uninstall it.
   
  Microsoft has released the update if you do not have to worry about coming back.
   
   

• Surface Pro stuck on the update screen

  Surface Pro is stuck on restart after clicking install updates. Scree shows Surface see points encircling me and message says update of your system. It seems to be fine until it reaches 14%, how she does not exceed 14%. I stopped and restarted several times and also tried power and volume button Reset and is always arrives at 14% and then does not go beyond.

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that your pro surface is glued on the update screen.

  I suggest you to refer to the suggestions of Steven_B responded on February 13, 2014 and check if that helps.

  http://answers.Microsoft.com/en-us/surface/Forum/surfpro-surfupdate/surface-Pro-hangs-when-trying-to-install-latest/8678b63d-e8a2-4B66-af2d-389d9e279a28

  You can also refer to the Microsoft Help article below and check if that helps.

  https://www.Microsoft.com/surface/en-us/support/warranty-service-and-recovery/Windows-stops-responding?OS=Windows-10

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Unable to connect Adobe cloud after update the expiration date of credit card

  Unable to connect Adobe cloud after update the expiration date of credit card.

  The activation server show that CC has expired on 21 September, 2015. Please renew the subscription if possible or re-purchase.

  The best option will be to contact Adobe support for this.

  Concerning

  Stéphane

• I HAV been trying to update my expiration date of credit card for 3 months.  When I go to lelien for "Update payment Details" and edit the expiration date and < click > save, I get an error saying my address in invalid.  I have several chat sessions

  Can someone please help...  Suggestions, how can I overcome this problem, in which case my Adobe Creative cloud subscription will expire today due to and credit card.

  I tried to update my expiration date of credit card for 3 months.  When I go to the "Update payment Details" link and change the expiry date then < click > save, I get an error saying my invalid address.  I had several chat sessions with support, called support and logged a ticket with support and every time they tell me to go to a particular link to update my contact information.  I do and I get the same error...   "My coordinates are not valid."  Now I'm in the position where my creative cloud membership will expire today everything simply because the Adobe address validation do not think that my address is valid.

  I got 'Cat' sessions with the support,

  I made a phone call to the support and

  I logged a ticket with support.  I'm really trying to pay my subscription.  Support ticket No. 0216009991

  Whenever I have contact the support they gave me a link to the site where I supposedly can I enter my credit card details.

  Whenever I went on the link provided, I'd get the same error.  "My coordinates are not valid."

  What I checked on my address.

  1. I look out the window and the view I get is the same as it was yesterday and the day, and in fact several years ago.

  2. I go out in the street, Yes, the street sign says the name of my street

  3. I go to my mailbox and it does not say the number of my mailing address

  4. yes I get the email to the address registered with Adobe

  5. yes I received the email from adobe delivered to the address

  6. I get the address of Google, yes I can find it on Google

  7. I converted to use the satellite view Google maps

  8. Yes, it's my house, with the 12 solar panels on the roof

  9. Yes, that's my black car in the driveway

  10. I check my reviews for my address Board rate, Yes, this is the address that I recorded with Adobe

  11. Yes, I had this same address registered at Adobe for the past 3 years.  So far I have not had a problem with my address

  12. I work with a software company that actually uses the address of Google, under license validation, built-in in their application.  I used this software to check to see if my address is recognized as valid.  You guessed it is recognized as valid.

  I did check my credit card

  12. Yes, I have, every time checked the status of my credit card with the Bank

  a. the card is valid

  b. the card's not over it's credit limit

  c. the card is not due

  d. the address registered to my credit card with the Bank is the same address that I recorded with Adobe

  Since the last link Adobe support gave me two weeks ago, to change my credit card details, I was able to key a new credit card in the fields (Yes it's good that I was forced to get a new credit card only for Adobe!   If I am that everything would be fine.

  But wait...   The details I provided this link have not been updated on the Adobe site.  (So I check the link... I was scammed to get my card number?)

  After investigation of the link, I'm fairly confident of the link provided is a true link to Adobe.  www.adobe.com/go/Secure

  Did anyone else had this type of problem when you try to update the expiration date of a credit card?

  The question is about to have an impact on my ability to process pictures for my photography business, it affects my ability to earn an income.

  So you could say I'm getting angry some of the stuffing!

  In summary...  I knew that my credit card had a new expiration date and I tried to update the expiration 3 months 3 months.

  Simply because the use of the validation of addresses, Adobe, has a few flaws, I was not able to update this information.  So Adobe today will stop my subscription.

  As I said in previous support tickets, chat sessions and telephone.  I'll be more disappointed if I am prevented from using software and Adobe cloud features.

  It is copied from an email I received during the night from Adobe...

  Continue to create with us

  Hi Thomas,

  Your Creative cloud membership will expire on August 23, 2015 (PT). We hope that you have been getting the best out of all that creative cloud has to offer. To extend your subscription, please update the billing for your account information, or add a prepaid card.

  Update your billing information (there is a link to where I can update the expiry date) pocztek sigh...   I still get the same error telling me that my address is not valid!

  Thank you for being a part of the creative cloud,

  The creative team Cloud

  Good creative team...  I REALLY WANT TO STAY IN THE TEAM, AS YOU CAN SEE FROM THE FOREGOING, THAT I REALLY TRIED TO SOLVE THIS PROBLEM SEVERAL TIMES OVER THE PAST 3 MONTHS.

  I tried to include as much information as possible in what I said earlier, I expressed in a way that will hopefully provide a little humor, but at the same time to portray the frustration I'm feeling right now.

  Honestly, I don't know what more I can do.  It seems that I have no other recourse start litigation for loss of income coming from Adobe address Validation errors.  There is a real chance that I will be litigated against because I won't be able to complete contracts.

  There must be a healthier solution of mind that court proceedings.

  Kind regards

  Thomas Croll

  (Tom)

  Tom, let me some time. I I will get these verified case and will contact you.

• How to insert or update in the data type date

  Hai All
  
  I have two table T1 and T2 from T1 to T2 I have to move data
  
  T1 structure code var, varchar of time that I said and T2 intimate outtime, intrinsically, all the introut are the date data type, so I need to pass the data to date the type varchar data
  
  
  How to insert or update varchar to date
  
  Concerning
  
  Srikkanth.M

  Hello

  SQL> create table tabDate
    2  (dt date);
  
  Table created.
  SQL> declare
    2  v_date varchar2(10):='10-03-2010';
    3  v_time varchar2(10):='0815';
    4   Begin
    5   insert into tabDate values(to_date(v_date||v_time,'dd-mon-yyyy hh24mi'));
    6   end;
    7   /
  declare
  *
  ERROR at line 1:
  ORA-01843: not a valid month
  ORA-06512: at line 5
  
  SQL>  declare
    2   v_date varchar2(10):='10-03-2010';
    3   v_time varchar2(10):='0815';
    4    Begin
    5    insert into tabDate values(to_date(v_date||v_time,'dd-mm-yyyy hh24mi'));
    6  end;
    7  /
  
  PL/SQL procedure successfully completed.
  
  SQL> select to_char(dt,'dd-mm-yyyy hh24mi') from tabDate;
  
  TO_CHAR(DT,'DD-
  ---------------
  
  10-03-2010 0815
  

  Twinkle

• updated part of date

  Dear friends!
  
  I need to update some of the jj/mm/2072 date in dd/mm/1972
  

  Method 1
  -------------
  update am_vehicle_sales
  set substr(to_char(delivery_date,'yyyy'),1,2) = 19
  where to_char(delivery_date,'yyyy') > 2010
  
  Method 2
  ----------------
  update am_vehicle_sales
  set to_date(delivery_date,yyyy) = concat(19,substr(to_char(delivery_date,'yyyy'),3,2))
  where to_char(delivery_date,'yyyy') > 2010
  
  Error which I receive is: ORA-00927: missing equal sign

  Please guide on how I could do.
  
  Thank you.
  
  Benard

  Just follow this link:
  http://www.freelists.org/post/Oracle-l/update-year-in-date-column, 4