Updating multiple images to process 2010

Similar Questions

• Acquire and process multiple images

  Hi, I use an acquisition card NI PCIe-1427 and tried acquisition and treatment of multiple image permanently. To be more precise, how can I extract a buffer of 4 images and perform some processing on the 4 images? For the examples, I can acquire 1000 images (or continuous), but must be extracted 4 images each time to combine them into a single image before saving the final image (on the handset). Thank you for viewing and comment. I woild appreciate if there are examples that I could learn too.

  Hi sp@davis,

  Did you look at This example that passes by sewing and processing of a video stream? There are tons of examples of different types of image processing on the community of NOR (like this one) If you have a type of mind-specific treatment. I hope this helps!

• Update 2015 kills Multi-Processing - DO NOT upgrade.

  Don't make the same mistake I did and install the update from 2015. Not only removes this update of the 'performance' multi-processing-transform your machine into 4, 6, 8 or 12 cores in a machine 1-core, but for the first time in the history of Cloud Creative, it automatically removes the previous version if you can't easily downgrade (a feature of "Remove older versions" is now enabled by default - which I don't believe existed at all before). I also had a devil of a time getting back to 2014 versions; the 'older versions' feature didn't work properly for me until I uninstalled all Adobe products on my computer.

  I find it absolutely amazing that Adobe has released a version of After Effects, which is considerably slower rendering due to temporary removal (I hope) support for multiprocessing and then hailed as a release of the huge performance. By Adobe notes, which I found after trying to figure out why my renders were much slower:

  "The simultaneous multiple images rendering function has been replaced by the new architecture after effects CC 2015 (13.5). The new architecture will allow a future version of After Effects to use threads processor and RAM more efficiently than the simultaneous multiple images rendering feature ever could. »

  
  

  In my view, that this update should take place until the next version of After Effects is ready for release; brag about the performance improvements in After Effects at NAB and then not warning people that the release is truly making makes them their multiples is slower than before is a very questionable move.
  

  Nothing was killed. You can use this function by keeping the previous version installed. Yes, the After Effects team agrees that the removal of previous versions by default is a bad decision. That's why we posted this:

  keep previous versions installed when installing applications CC 2015

  If you find the simultaneous rendering of several images of multiprocessing feature to be useful, then you can still use it after effects CC 2014 (13.2%). You can do your work in after effects CC 2015 (13.5), save the project, and then open it to the final in the previous version. In this way, you get the best of both worlds.

  Replace us made simultaneous multiple images of multiprocessing with much better multiprocessing in the near future.

  Many things are much faster in after effects CC 2015 (13.5). We see many advantages to make this version available now. If you want to wait and continue to use the previous version, it is also easy to do.

• Can I update the image of factory restore?

  Hi all

  I recently had the pleasure to make a 'factory restore' on a M100 and an A300.

  While the process went smoothly (even if the A300 recovery disk creator should not be put back first to make it work), data that has been restored were, of course, obsolete because he didn't understand not updates either the operating system (Vista Home Basic) or to one of the Toshiba Software (including drivers and tools utility).

  I know that you can return the system to Toshiba for a new image of the HARD drive by them (at great cost), but I don't know if that provides a picture of 'update' or if she simply replaces the original image (obsolete).

  Is it possible the 'factory restore' image stored on the recovery partition can be updated and a user, or a technician of the 'non-Toshiba"without having recourse to external software such as Acronis?

  Thanks in advance for all advice offered.

  Hey Buddy,

  No, you can update the image of factory restore t. Settings (Windows, driver, etc.) are stored in an image that can t be changed or updated because these settings are pre-tested on your laptop computer and any change would be not compatible. In addition, I think that Windows updates are made with two or three clicks, you need just to a good internet connection. Alternative, you install Microsoft's latest Service Pack which contains many important updates ;)

  By the way: I made my own image using Acronis image. After the installation of recovery disk Toshiba I removed all applications that I n t need (ConfigFree for example), installed the Windows updates and my other apps that I need (Skype, Office, etc.). After that, I tested the laptop a bit and finally and especially that I created an image with Acronis. So I can restore my own settings every time too. ;)

• display multiple images in Labview front panel

  Hi all

  I have an application in which I want to show multiple images (say, 16) on the façade of labview (thumbnail is preferable). I want to show some information about the image (like their quality and the index number). Now if the user double clicks on a thumbnail of the image then I want to choose this particular image for further processing.

  Could someone tell me please how to do this?

  I see several approaches here.  We need to start by a group of 16 indicators of photo.  Put the photos in them.  There are several ways to scale to the size of the thumbnails.  The simplest is probaby the ZoomFactor of an image property.  One of the toolkits - Vision, I think - includes functions to resize the images.  There are also screws posted on this forum to do simple image and someone recently released most of the code to do with .NET.  You can then seek a double click on any of these images and determine where the user has clicked.  I think you can find the sample code to detect a double-click; the basic idea is that you look two mouse events down within a certain period of time by using a structure of the event.

  Another method would be a single picture control displaying multiple images.  You want to search for two clicks to the same place (or very close to the same place) in a certain period of time, then determine the image that is displayed for this place.  A good start for it would be Ben emoticon display VI http://forums.ni.com/t5/BreakPoint/Starware-A-new-concept/m-p/616094?view=by_date_descending#M4595

• How can I have multiple images in one frame in movie maker?

  Hello

  I would like to know how I can include multiple images in one frame in movie maker?

  Thank you.

  It would be useful to know exactly what you want to create.

  You can prepare the images in an image editing program
  before you import into Movie Maker.

  Picasa free software can make collages:

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Picasa
  http://Picasa.Google.com/
  (for Windows XP/Vista/7)

  Tutorial Picasa: Collages: creating a montage
  http://Picasa.Google.com/support/bin/answer.py?hl=en&answer=19539
  (Photo battery option would be worth)

• When sending multiple images to photoshop camera raw, no images are displayed in photoshop.

  I send multiple images in camera raw to the bridge as part of my work. I make my changes and then select them all and click on the button "open the Images. When I did earlier using Photoshop CS6, all these images open in Photoshop CS6 and be aligned at the top of the window. Now that I have Photoshop CC, when I click on the button 'open image', I'm being transferred to the CC of Photoshop, but some images are open upward. Only a few hours after I downloaded Photoshop CC, Images have been sent there by Camera Raw, but they were sent one by one. I had to finish the job on a single photo, save it, then another of the images I sent Camera RAW would show up. Now, back to Photoshop after a break of 3 hours, I can not camera raw to send images Photoshop CC. I had to go back to my Photoshop CS6 in order to continue work on my assignment. I knew that there will be some changes in CC, but do not think they would be this boring.

  Also, in order to get several images displayed in Filmstrip mode in Camera Raw, apparently I have to send via Bridge. I can't drag and drop a folder into Photoshop CC. Is there a way around this?

  Hi terryleemartin,

  If please check, is your Photoshop and Bridge are updated to the latest version.

  In addition, reset the Photoshop preferences default back so if there is no change in the settings of this problem.

  Reference: Preferences in Photoshop

  Kind regards

  Mohit

• You can change multiple images to a PDF in photoshop?

  I scan a lot of old publications with images and drawings. The images are in black and white, but my scanner produces better results set to color. Therefore, I need to convert images to grayscale in Photoshop for Acrobat. I have several PS actions that facilitate this process, but I would like there was a way to select multiple images in a page or a PDF file and perform actions on them (a lot) instead of one at a time. Are there? Or maybe a method other than what I'm doing?

  I recommend that you scan all first, save it as a TIFF, make any desired correction and only then make PDFs. direct scan to PDF is ideal for simple simple workflows, but a responsibility when the correction is required.

• Ability to download multiple images at the same time on Windows?

  I would use Revel for storing my photos, but must be able to download my photos to have a personal backup. I intend to have my updates have taken place since my Android phone, but when I try to download on the site it just allows me to upload one image at a time. Is it possible to download multiple images / my entire library when you run Windows?

  You are right on adoberevel.com, you can only download one photo at a time. Mac app allows the selection of a group of files to download. This feature has been requested for other platforms and is on the wish list for consideration in future versions of revel.

  The other option is of 12 elements. Users who have their pictures put in place in mobile albums in the organizer of items have a current automatic synchronization between the organizer and revel. If you put autoupload in place on your mobile devices, this essentially gets then you a copy on your computer and access to a copy in the cloud on all of your devices.

  Guinot

• Scanning multiple images in 11 elements

  How can I scan several photos on my Photosmart HP 7520 scanner in Photoshop elements 11 without analyzing one by one.  I want to place several photos on the scanner and have the software select the multiple images and place them in separate for processing files.  Thanks for your suggestions.

  Ken Goff

  Scan from in the editor, rather than the organiser. Then, after scanning multiple photos, select Image > divide scanned Photos.

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children

  If this post or by post from another user solves the original problem, please mark as correct and/or useful messages accordingly. This helps other users with similar trouble getting answers to their questions more quickly. Thank you.

• How can I resize multiple images in PSE11?

  I used PSE10 to resize multiple images by selecting the option "Process multiple Images" of the undeneath the drop down "File" menu

  I just migrated to PSE11 and this option is not available - it is greyed out and cannot be selected.

  Anyone got any suggestions? Thank you.

  In PES 11, you must be in Expert mode (the equivalent of change complete in previous versions). Click on the word "Expert" at the top of your screen, and it should be available.

• CC of Photoshop crashes when opening multiple images

  Does anyone else have this problem of PS CC crashing while trying to open multiple images? If you open a file at the same time, there is no problem, but 2 or more and it hangs as shown below. I tried with JPG, TIFF and PSD and still get the same problem.

  I also tried booting while pressing ctrl/alt/shift, but still get the same problem.

  PS The CC is 14.0, 32-bit version, running on Windows 7, which is updated. I have only 4 GB of RAM, that PS takes 60% of it according to the system information panel. This could be a cause, or is this a bug in the software? I've never had this problem before in CS6 or precedent.

  Thanks in advance.

  

  GIS [3]. Name = name of the Module fault

  GIS [3]. Value = ig4icd32.dll

  GIS [4]. Name = Fault Module Version

  GIS [4]. Value = 8.15.10.2202

  The problem is with your Intel video card driver.

  Update the driver from the Intel Web site.  If this does not help, contact Intel so they can get more information to correct the error of the driver.

• Q: custom profiles camera and process 2010 - incompatible?

  I have two digital cameras that I had modified to shoot infrared.  I have to use custom camera profiles (created with DNG profile editor) when I import pictures IR, otherwise the custom white balance is not maintained properly.  However, even if the module development shows that the process is 2010 for my IR images, cursors detail and contrast to the title of the noise reduction are grayed.

  I read somewhere on the web that use custom camera profiles import actually reduce to naught the possibility to use the new features in process 2010 - can anyone confirm this, or otherwise explain why I am not able to use the features of the noise reduction of the 2010 process in their entirety?

  Thank you very much.

  sandrift71 wrote:

  I have two digital cameras that I had modified to shoot infrared.  I have to use custom camera profiles (created with DNG profile editor) when I import pictures IR, otherwise the custom white balance is not maintained properly.  However, even if the module development shows that the process is 2010 for my IR images, cursors detail and contrast to the title of the noise reduction are grayed.

  Even with amounts to values non-null?

• Cannot paste develop settings to multiple images in Lightroom 3

  I have just started using Lightroom 3 and am only able to paste develop settings to a single image.  If I select several images it sticks only setting the active image, not all selected images. I never had this problem with Lightroom 2.  Everyone knows about this problem?

  When you have multiple images selected to develop, the back button becomes Sync. CTRL-click and it becomes Auto Sync. Now you can paste to multiple images.

  In fact, I think a better way to copy parameters between the image to develop is to use synchronization instead of copy/paste, because synchronization is a one step process and copy/paste is a two-step. Go to the image you want to copy to and select all the images you want to copy. Click on synchronize.

• ACR6 - update of the current process

  Can someone please explain to me why there is an update to the current process of ACR6 button? Why is it necessary?

  It is not one in ACR5.7 (AFAIK), although there is no new details controls either.

  Something bad happens once you decide to accept the 2010 process? Something that can not be reversed?

  I'm sure it will be obvious when explained, but I don't see what it could be!

  You guessed it, Yammer P. Demosaic is separate and independent of the process version. The only things that fall under the 2003-2010 process version distinction are the sharpness, noise reduction, and fill light.

  Eric