upgrade R12 on linux with vmware

Similar Questions

• 10g RAC on Linux with vmware - time synchronization problem

  Hello
  
  I installed 10g RAC on Linux with vmware server 1.0.5 on my machine.
  
  I knew that the time on the two nodes of the rac is different and goes out of sync.
  
  I set the time on both nodes, but after an hour, they are not synchronized.
  
  Their time is different with the time machine.
  
  Is there a way to put the two nodes at the time of synchronization with the time of the machine?
  
  Thank you
  Drane

  Hi drane

  Yes it is possible by the parameters of a time server ntp or get your servers synchronized with a time provider ntp.

  See this http://www.vmware.com/appliances/directory/210

  www.VMware.com/PDF/vmware_timekeeping.pdf

  Published by: Hub on November 12, 2008 14:22

• Dist small linux with VMWare player

  I only want to allow a host workstation run virtual computer images. So for this I need an OS and a player of VMWare. Currently, I used the OEM operating system that comes with work stations. However, they come with vista overload is big enough. Especially when it comes to memory. So I was wondering if there is any document that describes a process step by step (or even a complete iso) with a linux distro and a vmware player installed on it. Where the os and vmware player has been configured to allow the player to vmware the largest amount of resources and where the player was executed near kiosk mode.

  This is of course what VMWare themselves have said would come in the future

  I suggest that you download and install that Xubuntu 8.04.1 codename Hardy Heron, includes long-term support.  It is the variant of Ubuntu Linux designed for low overhead.  Installation of Xubuntu should be very simple in normal cases.

  After that Xubuntu is installed, download and install VMware Player using the packaging variant ".bundle".

  To install VMware Player on Xubuntu, simply run the .bundle from the command line - open a terminal and

  type something like this:

  $ sudo VMware-Player - 2.5.0 - 118166.i386.bundle

  You will need to answer several questions, starting with your password.  You probably want to just press enter several times to select the default values.

• R12.1.3 with 11 GR 2 clone from Linux to AIX?

  Hello
  
  I'm looking for information on how R12.1.3 with 11 GR 2 can be cloned from Linux 86 - 64bits in AIX.
  Can the system be cloned using rapidclone following the document, cloning Oracle Applications V12 with rapid Clone [406982.1 ID], even if the target system has two different platforms?
  
  Thanks for the help in advance,

  1.
  Is there a random order, which must be made previously between the node of the database server and the application server node?

  It does not matter.

  2.
  The database node can be cloned rather than through export/import process after the migration of application server?

  No - Your options are tablespace Export/Import or transportable (using Transportable Tablespaces for EBS Release 12 using Database 11 g 2 [1311487.1 ID]).

  Thank you
  Hussein

• 5.5 R12.1.1 using VMware Linux installation

  I wanted to just make sure that I am following the right steps to perform my first installation on Linux (in fact will see the OS linux for the first time). I'm still to start the installation. I have just completed the preparation of the part...
  
  1 download R12.1.1 media pack (40 files about 45 GB) 64-bit
  2 downloaded VMware 2.0
  3 downloaded Oracle Linux 5.5 for 64 - Bit
  
  The current system configuration:
  OS: Windows 7 Home Premium
  RAM: 4 GB
  Hardrives: C 180 GB > D > 30 GB
  
  
  My question:
  
  1. I intend to install VMWare through VMWare install Linux in the D: drive and then use an external hard drive to install R12. It is the right way? or is it possible to install Linux on an external hard drive to my setup, it's completely portable like this? What is the best approach?
  2. can I unzip the R12.1.1 media pack and create a stage directory in windows 7 and then share this intermediate directory for linux in order to start the installation of R12 on Linux? or do I have to create an intermediate directory within the Linux environment?
  
  Other suggestions are greatly appreciated.

  Salvation;

  1 download R12.1.1 media pack (40 files about 45 GB) 64-bit

  Be sure to download the correct media pack (if your linux is 64-bit (x 86-64) that you need for the program to install 64-bit

  2 downloaded VMware 2.0

  You can use VMware workstation

  3 downloaded Oracle Linux 5.5 for 64 - Bit

  The current system configuration:
  OS: Windows 7 Home Premium
  RAM: 4 GB
  Hardrives: C 180 GB > D > 30 GB

  1. I intend to install VMWare through VMWare install Linux in the D: drive and then use an external hard drive to install R12. It is the right way? or is it possible to install Linux on an external hard drive to my setup, it's completely portable like this? What is the best approach?

  You can use the external hard drive and do not forget that you have almost 300 GB of space for installation of the DEMO, when you create a server Linux on WMmachine give more space than 300 GB

  2. can I unzip the R12.1.1 media pack and create a stage directory in windows 7 and then share this intermediate directory for linux in order to start the installation of R12 on Linux? or do I have to create an intermediate directory within the Linux environment?

  You can do this, or you can use the ftp program and move the scene to your VMware linux file and unzip it in there

  You can find more details on my block:
  http://heliosguneserol.WordPress.com/2010/06/11/Oracle-applications-12-1-1-installation-on-OEL-5/

  Respect of
  HELIOS

• How to get started with vmware in the SMB

  Hello world

  I read through this forum to help me understand more about vmware. I think that I have only a very basic understanding of vmware, so ask your recommendations for the project, I'm about to start.

  We are a company SMB with 3 offices in 3 places. We are about to implement a new software which runs on separate SQL 2005 servers in all 3 offices.

  I intend to provide all 3 offices with a similar configuration and have the servers SQL replicated during the night.

  The necessary servers are SQL server, file server and license server.

  The material I've been watching is DELL R710 or PE2950III PE. The number of people using the software would be about 5 to 6 for each office.

  Now, my goal is to move finally all our servers in a virtual machine, but to keep it simple for now, let me just start with what it takes for my project.

  My plan is to buy 1 server for each office and make them run 2 VMs each (SQL, Server license). With respect to the file server, I could use the local storage of the physical server.

  I am aware that this configuration will give me any redundancy in the case of a material error in the physical machine, but I'm hoping to expand my setup with the budget for the next fiscal year and buy the redundant servers.

  So I'm trying to get to the top and now works with spending too much on the material, but I still want to be able to move to a business solution from vmware that allows me to move VM is 1 physical machine to another, etc..

  I wonder now, what software to use for my project. I've been mainly reading on ESX and ESXi. I was looking at the license to the Foundation, but not sure that ESXi makes much sense at all if I have my VMs on 1 physical computer only.

  Then the VMware Server would be a better solution for me? If I decide to VMWare Server, can I still upgrade ESXi later?

  If I go with ESXi, I understand that I can have embedded it or installed. I guess that I can't use the local file storage when using the embedded version of ESXi?

  If I install ESXi, however, I have to start in Win Server 2003 or 2008 first that requires a separate license again and then install ESXi on its own partition on a Raid1 array. I would then use a Raid 5 for all virtual machines.

  Also with ESXi, would I be able to upgrade to a later version of ESXi with my setup? I guess that all the virtual machines must be stopped for an upgrade to ESXi?

  Appreciate any advice.

  See you soon

  Yes, this seems a sensible approach. As you are new to do this of course, you understand the different options of ESX here because it can be a little confusing to start. Going with Vmware server path would be much more disruptive in the future that you will suffer more downtime to make the change. Just to be clear, VMware Server is one where we have an application that runs on Windows (or Linux) to provide the functionality of virtualization. ESX or otherwise runs directly on the hardware.

  ESXi free edition, this may be an option for you initially, but you can not manage it with vCenter. You must use the VI Client directly to each box, failed to get the enterprise as vmotion etc features. With a single server, initially, this could be a good starting point.

  With paid for ESX you will have many other options, note the ESX layer features are essentially the same although we allow them just allows you to add the other stuff by taking the commercial offer.

  At this point it is assumed that you have vCenter somehow, so you will need a Windows Server to the host which can be a virtual machine if you want. If you started with the edition free is simply a matter of connection of the device of vCenter for ESXi nodes and they get activated with the management features - no downtime is necessary.

  Then you have 2 choices for ESXi

  (1) install on HDD or USB

  (2) buy what it come pre-installed with your server.

  The question is then what edition you purchase. We have some packages SMB has been called Essentials or Essentials more, but they are limited to a maximum of three servers altogether, it would be ok for you in you're first scenario but if you then want to make each site two nodes, so you'd not nowhere to go, a nd currently is not a licensing mechanism to upgrade , that's why I suggest you seriously consider 'Standard '.

• Satellite Pro 6100 how to use recovery DVD-ROM with vmware products

  Hello

  I like to use the recovery DVDs of product (T201651-GR) of my Satelite Pro 6100 on VmWare player, because I use openSUSE Linux as main operating system (not Windows installed on the hard disk).
  I do like install and save hard disk laptop, so that to restore later inside the vmware. If it works?
  I wonder if someone can tell me how to use my legal version of Windows XP on VmWare player?

  Thank you in advance,
  Bernd

  Hello

  I doubt that it works with VmWare.
  Why?
  Because the restore CD contains the ghost image files and you will need to boot from the recovery CD for installation.

  So I see the chances of getting this job running VmWare.

• Network down frequently on a virtual machine after the upgrade of computers host and vmware to win 10

  Dear all,

  A week ago, I upgraded both my two machines VMWare Win 7 to win 10, as well as the host operating system. also from 7 to 10.

  Now once every 1 or 2 days, one or both the two vmwares aura an esclamation mark on the network status icon in the lower right corner and West no connection.

  The host operating system is NOT having any problems with the network.

  The solution is to disable and reactive the adapter to virtual machines, or repair of running Network Diagnostics where she'll tell me that it s has reinstated the connection to the bridge. But obviously I´d prefer the VM´s to be on the internet 24/7 without my intervention.

  I have another computer on the same router on which I did the same thing, but with this I m not having these problems. A different and not connected equipment via the VPN running on the host OS, which is the case with the machine that s had questions.

  But even once, the host operating system is not having issues, the two VM´s aren´t always the two to have this problem, and this never happened when he was all Win 7.

  I ve disabled some nights windows defender analysis and TCP/IP V6, but neither helped.

  Want to see some of the information from the last network diagnostics / repair or some log file, or you already know what would be the solution to my problem?

  Thanks in advance!

  Best regards

  Jazzl

  Well, I thought that a vm was having this problem a lot more often than the other, so I looked for error messages in windows journal, showing that the network problem - have to with DHCP btw - always spent 2 minutes after an event regarding slui.exe, not found on the other machine.

  What I also noticed was that the problematic vm had lost its activation of windows with the upgrade to win 10 (win 10 has limits to how much the same license can be run as virtual machines), is is not the case for the more successful one.

  Then I copied the good machine, which contains the same as the other, changed mac and uuid and now it s showing that enabled, no problem so far.

• Install Oracle R12.1.1 with database R11.2

  Dear Experts,

  When you install Oracle R12.1.1, the database version shipped with it is 11.1.0.7, is if there is a way to install Oracle R12.1.1 with DB R11.2 directly without needing to upgrade DB of 11.1 to 11.2 after installation?

  Kind regards

  Ahmad,

  Hi, Ahmed.

  You must manually set the following:

  The ORACLE_BASE environment variable must be set accordingly.

  The ORACLE_HOME environment variable points to the new 11.2.0 Oracle home.

  The PATH environment variable includes $ORACLE_HOME/bin and the directory where the new perl executable is located (usually $ORACLE_HOME/perl/bin).

  The LD_LIBRARY_PATH environment variable includes $ORACLE_HOME/lib.

  The $perl5lib environment variable points to the directory where the new perl libraries (usually $ORACLE_HOME/perl/lib / [perl version] and $ORACLE_HOME/perl/lib/site_perl / [perl version])

  So, here's what you need to do:

  -Open a new terminal

  -Env variables set as follows:

  $ export ORACLE_BASE =

  $ export ORACLE_HOME =

  $ export PATH = $ORACLE_HOME/bin: $PATH

  $ export LD_LIBRARY_PATH = $ORACLE_HOME/lib

  $ export $perl5lib =

  Once you set the env variables, issue "env | ranking"to check.

  And, "what sqlplus" should be referred to the $11.2.0.4 ORACLE_HOME/bin/sqlplus

  Thank you

  Hussein

• HOWTO add properties custom for redhat linux vm after 'Clone, Linux with a single NETWORK card.

  Hello

  How can we add the custom properties to a new linux vm after clone of model with the vco workflow?

  Something like ' / bin/echo x.x.x.x >/etc/newfile ", run this with sysprep or something (not ssh) inside the new VM for linux with a vco workflow.

  
  Someone at - it an idea about it?

  Thomas

  If you can't get it by sysprep, you can use the VIX plugin for vCO to run a command in the guest OS once it is deployed and under tension.

  http://labs.VMware.com/flings/VIX-VCO

• Cannot start program with vmware-the unit - helper.exe

  Hello community,

  First of all, I have an Internet Explorer with the vmware-the unit - helper.exe

  I can run mode of the unit and can also start Internet Explorer of the UnityStartMenu.

  My config is:

  HostOS: Windows 7 64-bit Enterprise

  AntiVirus: Sophos 9.0.0

  VMware: WS 7 build-203739

  VM: Windows XP SP2 with IE 6

  Startup of IE command:

  "c:\Program Files (x 86) \VMware\VMware Workstation\vmware - unity - helper.exe"-run "h:\VM\VMware_VM\Win XP_SP2_unitymode\vm.vmx" "" C:\Programme\Internet Explorer\IEXPLORE. "." EXE ".

  The next test that I did.

  Start the VM - & gt; View - & gt; activate the Mode Unity - & gt; launch IE using the menu start VMware / work

  Start the VM - & gt; View - & gt; activate the Mode Unity - & gt; Startup of IE using the above command / didn't work

  Start the VM - & gt; View - & gt; disable the Mode Unity - & gt; startup of IE using the above command / didn't work

  Shutdown VM - & gt;  startup of IE using the above command / didn't work

  I don't get the error message when I run the command. I found some clues that this "tool" does not work with Windows and can only be used on Linux hosts.

  You also have a similar experience?

  Thanks a lot for the effort you

  I wish you merry Christmas and happy new year.

  concerning

  Nico

  Kiss = Keep it simple and stupid

  Running a program with vmware-the unit-helper is only a function on Linux hosts. We have had a few requests to add it to Windows hosts, but this isn't a feature on Windows now.

• Want a career with vmware :-)

  Hello

  I want to build my career with Vmware it like just too much. I'm a RHCE already then based thinking IAM ESX server will be familiar lil thing that its function of redhat linux.

  So please tell me the certification path in vmware. As in redhat, it goes like thisRHCT - & gt; RHCE-& gt; -RHCSS- & gt; RHCA

  I live in India in delhi please tell me the authorized training partner's address/phone if possible to ask you about that.

  Thank you very much

  [email protected]

  VCP3 is review the certified professional VMware for the 'old' Infrastructure 3 Envirenment

  VCP4 is the new Envirenment vSphere VMware certified professional examination.

  Concerning

  Michael Haverbeck

  If you find this information useful, please give points to "correct" or "useful".

• Getting started with VMware ESXi

  Please forgive me, because I'm just getting started with virtualization in the data center (ESX and ESXi). I been using virtualization desktop and server (player and GSX Server and Workstation) for several years now and I'd like to see if ESXi would be a good choice for an amateur system in order to use a training platform.

  Are my limited infrastructure management tools, or are there third-party or community free equivalents that will make the most much (not necessarily all) Infrastructure functions for me getting started with ESXi? I can't afford the cost of a license of Infrastructure to learn just the platform and also have a few questions regarding the ESXi environment.

  ESXi abstract everything, or I can pass through some devices (for example, a map of Zaptel for VoIP Asterisk) to a guest operating system? That would be my only reason for the use of a Linux host and stick with VMware Server instead of going completely virtual.

  Any assistance to the start-up, as well as good resources for someone new data center virtualization (no virtualization in general) would be very appreciated. I tried to read some briefs VMware tech directly, and a part of the documentation can be downright confusing.

  Thanks in advance, and I look forward to the next meeting.

  ESX are equipped with a fully functioing 60 days trial license - ESXi when correctly entered, you will receive an unexpiring licenses to run ESXi - discover https://www.vmware.com/tryvmware/?p=esxi

• Upgrading OS from Linux and many processes under

  We are 11.5.10.2 in a split database configuration. Our database server is 64 bit and our application servers are 32-bit. We are trying to replace our servers and upgrading our version Linux RH 4 to 5 in the process. Everything was well spent, but I see some differences in the number of OS Linux processes created on the servers apache/forms and ccm/reports. I see no problems with the operation of applications and no diagnosis of reporting errors and no errors in the log files. Basically, everything seems fine except that I am concerned about the huge differences in the number of processes on the operating system. Here's more information.
  
  Not Linux 5 handle java process process/children unlike Linux 4? Both servers are running java version '1.6.0_07 '. I have not be able to understand this yet. Thanks for any input.
  
  Process 4 Linux (Server ccm/reports)
  2.6.9 - 42.ELsmp #1 SMP kills Aug 12 23:27:17 EDT 2006 i386 GNU/Linux
  ch-number of FE for GSMServiceController = 42
  ch-number of FE for GSMSvcComponentContainer = 88
  ch-number of FE for rwmts60 = 8
  
  Process Linux 5 (Server ccm/reports)
  2.6.18 - 164.el5PAE #1 SMP kills Aug 18 16:59:55 EDT 2009 i386 GNU/Linux
  ch-number of FE for GSMServiceController = 1
  ch-number of FE for GSMSvcComponentContainer = 2
  ch-number of FE for rwmts60 = 1

  You see the difference between posix threads and native threads and RH4 RH5. In RH4, there is a separate process for each thread,

  RE: [suse-oracle] nr of the listener processes
  http://lists.SUSE.com/archive/SUSE-Oracle/2005-Dec/0003.html

  pthreads - POSIX threads
  http://UNIXhelp.ed.AC.uk/cgi/man-CGI?pthreads+7

• I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  I have a Macbook Pro (17-inch late 2011) is fully compatible with El Capitan and Maverick. I'm a little hesitant to upgrade. Tried before with e lCapitan and was NOT successful Please HELP

  Why has been upgraded to El Capitan failed before?

  The only problem is that some applications require the upgrade and some devices that connect to the computer require updated drivers up-to-date. The problem is that for some devices and applications updates are not available and so they do not work with El Capitan.