Satellite Pro 6100 how to use recovery DVD-ROM with vmware products

Similar Questions

• Satellite Pro L40 - how to make a dual boot with two recovery disks

  A small question;
  How to dual boot with two recovery disks ive got with my laptop (Satellite Pro L40)

  discs 1 & 2 are windows vista buisness
  discs 3 & 4 are windows xp profesional
  Disc 5 is updated the bios

  The guy where I bougt garage computer (a metal regular store named expert) says that it is posible with discs tose.
  I have
  I already have a partition, but when I boot from disks, is not has the option to select a partition

  Thanks already

  > Satellite Pro L40 - how to make a dual boot with two recovery disks?
  Short answer: you can't do that. Maybe if you have two hard disks (I tried didn't) but as much as I know your SP L40 has only one.
  Ask this smart guy, how to do this. Maybe it's a useful tip.

• Satellite Pro 6100 - how to change the date and time in the BIOS

  Hello

  I received a satellite pro 6100 that had not been used for some time. Windows does not work then he reinstalled with the good drive.

  When I try and windows 'enable', I get the error 32777 and the laptop is unable to connect with the activation servers that a google leads to believe me that the date and time are incorrect in the bios.

  I know that Press esc to access the bios but there is no option to change the date and time in there. I put the date / the correct time in windows, but this does not seem to synchronize with the bios. I've updated to the latest version of the bios, but this is not enough.

  How can I change or update the time in the bios?

  Thank you

  Hello

  I doubt this time and date setting BIOS does affect Windows activation time Windows doesn t affect it in my opinion. There must be another reason for this problem.
  You can activate Windows by phone?

  Normally the date and time in the BIOS can change you if you mark the date or time, and then press on + or - to change this. Sometimes you have to press PageDown/to the top according to the model of BIOS or laptop.
  Usually in the configuration of the BIOS you will find a brief info how changing the values.

  Check this box!

• Re: Satellite Pro 6100: can I use RAM PC3200 modules

  Hello

  I looked on the specification for this laptop and it does not have to go on 1gig, on the site of crucial, it says to use pc2700,

  But the laptop would always fully work with PC3200 (400 MHz) in it?

  Also the laptop actually supported on 1gig?

  Thank you

  As much as I know the Satellite Pro 6100 supports a FSB 400 MHz.
  So, theoretically, you can use the modules supporting 400 Mhz too.

  It is important that you use the modules DDR SODIMM 200 pin.
  The Mhz may be different.

• Satellite Pro C660-111 - error creating recovery DVDs

  Hello

  I am trying to create recovery discs to aid Recovery Media Center to Toshiba for my new Satellite Pro C660-111. However, I have tried three times now and it gets about one-third through the first of two discs and comes up with the following error:

  Missing E:\Boot\bcd
  (Error 020123-F1-00000000 code)

  Help please! What I am doing wrong?

  Thank you very much
  Franki

  Hello

  What kind of blank DVDs that you use to create the Toshiba Recovery disk?

  Maybe the error is related to the disk, I used DVD - R Verbatim media and had no problem to create diskettes.

• Satellite Pro M10: Can I use burner DVD SD-R6472?

  I have a Satellite Pro M10 GR / / model PS630E-G207W-GR. I want to put in a DVD burner. Can I use the slimline burner DVD SD - 6472 R Toshiba?

  Thanks for the quick reply

  Herbert

  Hello

  Unfortunately I have not found any information that would confirm that this drive is compatible.
  But I found this Slim SelectBay DVD Multi drive: PA3231E-1DV1

  This site of Toshiba products:
  e http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/options_and_accessories_search_by_model.jsp?servic = 1 = us & selSeries & selFamily = 2327 & SelCategorie = 2319 & family = 2327 & product = 69238 selP

  However, if you want to order that a 100% compatible and taken in charge by car then please request the Toshiba service in your country. There, you can order the CD.

• Satellite Pro 4260: How to remove the DVD drive?

  I have a 4260 Pro Satellite and it seems that the DVD drive is broken and I want to replace it. I can't figure out how to remove the old.
  Does anyone know how? Is there a manual with available how?

  Thank you

  Hello

  This notebook is not know for me but has checked some sites on the net and it seems that the top cover must be removed.
  Then lift the CD-ROM/DVD-ROM drive to disconnect PJ700 on the CD-ROM/DVD-ROM of PJ15 card on the system board.
  Remove the two screws that fix the Board Connector CD-ROM/DVD-ROM.
  Separate the brace connector connector Office CD-ROM/DVD-ROM and CD-ROM/DVD-ROM CD/DVD-ROM drive

  Well, I think that it of not easy for a person without experience.
  So if you n t know how to do and you have without much experience you should ask someone how knows what to do ;)

• How to use Recovery DVD to install the new copy of the OS and CUSTOM PARTITIONS?

  Hello

  I have problem with appropriate recovery likely to start the recovery DVDs Thoshiba function created.

  I burn two DVD with the creator of recovery Toshiba Media witch was pre-installed on my computer. Now, I want to use it to install the new copy of Windows 7 OS on my laptop. BUT I don't want to erase entire HARD drive. I want format only the C: partition and let the data on my D: partition. I also want to set the size of the C: partition.

  When I insert DVD and start to form, some app start but display info that every partition is removed. I can't choose another option.

  How can I do?

  Hello

  Check it please http://aps2.toshiba-tro.de/kb0/HTD1303440001R02.htm document.
  I think that everything has to be explained here. If you have any other questions please let us know.

• Satellite Pro 6100: BSOD after use of the 6000 SP recovery CD

  My 6000 Pro Satellite recently bitten the dust after several years of daily use. I just bought a used SP6100, after which I tried to use my SP6000 product recovery CD to do a reformat. Since when I Stop (obviously common) * 0x0000007B (0xF9680640, 0 x 0000034 etc.) error and blue screen on reboot.

  Is there a way to turn it? I had not thought about media recovery is specific to a single model (and the 6000 and 6100 are quite similar in terms of model anyway), but is this the case?

  Thank you very much for all the advice

  Cannot use the recovery CD on the different laptop models. Perhaps the two Satellite 6000 and 6100 are similar, BUT not even.
  Different drivers and chipset utilities are used on these books.
  The restore CD contains all drivers and utilities, and it seems that the blue screen error message appears because some applications and drivers are incompatible and unsupported on the second satellite!

  So if you want to use the Sat 6100 you should install the OS from the original CD of Microsoft and then visit Toshiba s driver and download the RIGHT and compatible drivers.

  Good luck

• Satellite Pro L10 - how to use product recovery?

  I've had this laptop for a while, it was done incrementally over the years and now seems to have abandoned completely.

  I can barely open anything without being invited to what program I want to open it with, and web browsing becomes almost impossible.

  I have all the product recovery discs but when I try to use following the instructions 'Insert disc in drive, turn on your PC while keeping the key C' nothing happens, after all a bunch of Eman windows continues to load.

  I'm close to throw this thing out the window (I live in a 3rd floor apartment) but cannont afford a replacement. If anyone can offer me some advice much whatever it is I would be very happy.

  Thank you

  Hey Buddy,

  If I understand you just want to reinstall Windows. Is this good?

  Therefore, you must use the Toshiba recovery disc. As far as I know the old Satellite L10 there is no option of HARD drive recovery, by pressing the C key will not help you.

  So, put the Toshiba Recovery disk and boot up your laptop. Then, go into the BIOS or BIOS boot menu and choose Start from the CD/DVD drive.
  The CD starts and you can reinstall Windows :)

• Satellite Pro M70: How to use Bluetooth?

  the dose M70 [PSM75E-009004EN] have built in bluetooth. If it dose how do you use it... because his got the bluetooth options. his confused me!

  Thank you

  Hello

  As far as I know, this unit was delivered without Bluetooth, but if you want to be 100% sure you should check the bottom of the unit. If the device supports Bluetooth technology, you should find the label of BT. If the unit have no BT cards, so you will find no BT label. Easy ;)

• Recovery CD/DVD for Satellite Pro 6100 products?

  Hello

  I bought a Satellite Pro 6100 (model number: PS610E-029ZV-BE) second hand and have experienced a non-recoverable accident.

  I need to reinstall it, but as you can guess, I don't have the recovery CD/DVDs. Someone out there has them and could send/ftp a copy?

  I tried with an official windows CD XP Pro, but the key which is on the small sticker on the laptop is not accepted...

  Thanks in advance for your help
  Bruno Mamer

  Hi Bruno.

  I recommend you get a new set of CD recovery of an authorized Service Agent. They are not too expensive, I recall.

  Kind regards

• Satellite Pro 6100 - what CD/DVD drive that I can use

  What DVD player is supported by the Satellite Pro 6100?
  I need to upgrade

  Thank you much for the help.

  Hello

  May I ask if you took a peek in the user manual?
  In most cases, information on compatible CD/DVD players are placed in the user's manual.

  Just for the note; You can also order a compatible CD/DVD player with ASP in your country!

  Check it out!

• Satellite Pro 6100 - is to "restore" a re - recovery CD install?

  Hello

  My Satellite pro 6100 won't start. "Starting process crashes and a message appears saying that the \windows\system32\config\system file:-«' is missing or damaged.
  When I ran the product recovery DVD, he asked me to confirm what operating system, I want to "Reinstall". At this point I turned it off because I don't want to do something that I can mean loose valuable data (photos) from my hard drive. The user manual is ambiguous, he speaks of restoring damaged files and restore the software preinstalled in the same section. Can someone tell me if I continue I will get the option just the file restore/repair damaged in question or he comes to wipe my hard drive (including my data) and completely re - install windows XP?
  Thank you

  Hello

  If you are using the recovery CD it erases everything on your computer! So if you have something that is important then it first save!

  BR

  Tom

• How to remove the bios password on Satellite Pro 6100

  Hello
  I got this Satellite Pro 6100, I would like to install windows xp on it, somehow once I opened it, it's just a black screen with the password.
  I removed the hard drive and I was able to access it with my computer, means that the password is not for the hard drive, but rather the bios.
  What is the password of the bios? How can I reset it? I removed the Green battery which I think it is the RTC battery, it would make? How long should I wait for the settings to be reset to zero?
  Y at - it no jumpers to reset the bios... ?
  I don't know what my son used a password, so I need help with this...

  Is it possible to kill the bios settings... ?

  Thank you

  Hello

  It seems that the machine has a BIOS password. And it seems that there are only 3 options:

  1 Google for the procedure how to remove a BIOS password
  2. ask your son for the password
  3. send your machine to an authorized servicepartner and allow them to remove the password, which means that you pay money for it.

  Welcome them